Raycon Everyday Earbuds Pro

Connect

To pair your earbuds, ensure they are in the charging case. On your device, enable Bluetooth and select "Raycon Everyday Earbuds Pro" from the list of available devices. The earbuds will enter pairing mode automatically.

Visual Description: Diagram showing the earbuds in their charging case, with arrows pointing to the earbuds. A smartphone is depicted with Bluetooth enabled, displaying 'Raycon Everyday Earbuds Pro' and 'ON' for Bluetooth.

Find the Best Fit

For optimal sound and comfort, select the ear tip size that provides a secure seal in your ear. Try XS, S, M, or L ear tips. Insert the earbud and gently twist it until it feels snug and stable.

Visual Description: Diagram illustrating how to insert and adjust the earbuds for a secure fit. Four sizes of ear tips (XS, S, M, L) are shown. An ear graphic indicates an incorrect fit with a red cross (❌) and a correct fit with a green checkmark (✔️).

Functions

Control your earbuds with intuitive touch gestures:

• Single Press (x1): Play/Pause ▶️, Answer/End Call ?, Activate Voice Assistant ?️.
• Double Press (x2): Next Track ⏩.
• Triple Press (x3): Previous Track ⏪.
• Five Presses (x5): Volume Up ?.
• Hold (5 seconds): Power On/Off ?.
• Hold (10 seconds): Reset ?.

Visual Description: Diagram of the Raycon Everyday Earbuds Pro with touch-sensitive areas highlighted. A list details touch controls for various functions.

Sound Profiles & Features

Customize your listening experience:

• Press Four Times (x4): Cycle through sound profiles: Balanced Sound ⚖️, Bass Sound ?, Pure Sound ?.
• Hold (3 seconds): Toggle Active Noise Cancellation (ANC) ON/OFF ? or Awareness Mode ON/OFF ?.

Visual Description: Diagram illustrating sound profile and mode selection. Pressing the earbuds four times cycles through sound profiles. Holding for 3 seconds toggles ANC or Awareness Mode.

Full User Manual

For more detailed information, please refer to the full user manual available at:

https://rayconglobal.com/pages/the-everyday-earbuds-pro-full-user-manual

Safety Guidelines

Please observe the following safety precautions:

• Be wary of any edges, uneven surfaces, and metal parts, including on accessories and product packaging, to prevent any possible injury or damage.
• Listen to music at a proper volume to avoid damaging your hearing and earbuds.
• Do not store in high temperatures, such as in a hot vehicle or in direct sunlight.
• Do not expose the earbuds or any of its supplied parts to rain or other liquids for extended periods of time.
• Do not drop or cause undue impact to the earbuds.
• Do not modify, repair, or dismantle the product on your own.
• Do not use any diluent or volatile liquid to clean the product.
• Do not use the product in a hazardous location.

Specifications

Bluetooth Pairing Name: Raycon Everyday Earbuds Pro

RDID: D795-25E-0225

Bluetooth Version: 5.3

Power Input: DC 5V / 1A

Capsule Battery Capacity: 500mAh

Call / Play Time: About 10 hours

Charging Time: About 1.5 hours

Support Profiles: HSP / HFP / A2DP / AVRCP

Sensitivity: 112 ± 3dB

Frequency Response Range: 20Hz-20KHz

Bluetooth Range: Up to 10 Meters

Total Play Time (including capsule): About 40 hours

FCC/IC Compliance

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure statement. The device can be used in portable exposure condition without restriction.

IC CAUTION: This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions: This device may not cause interference. This device must accept any interference, including interference that may cause undesired operation of the device. RF exposure statement: The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

FCC ID: 2AZOV-RBE795B

IC: 27185-RBE795B

Support & Warranty

For customer support, please visit: www.rayconglobal.com/support

For warranty information, visit: www.rayconglobal.com/warranty