Step2 8633 Anniversary Edition Up & Down Roller Coaster

Contact Information

For assistance or replacement parts, please contact:

The Step2 Company, LLC.
10010 Aurora-Hudson Rd.
Streetsboro, OH 44241 USA
1-800-347-8372 USA & Canada Only
(330)656-0440
www.step2.com

Important Warnings

⚠ To Avoid Serious Injury

• Adult assembly required.
• Provide adult supervision at all times.
• Do not use in areas unsafe for pedestrians.
• Do not use on steps or steep inclines where product could roll away.
• Keep away from pools or other bodies of water.
• Shoes must be worn during use.
• Allow only one rider.

⚠ Burn Hazard

• Always check the temperature of the product before letting your children play on it.
• Remember that the product may cause burns.
• Always be aware of the sun and weather conditions, and do not assume that the equipment is safe because the air temperature is not very high.

Safety Information

• Intended for use by children from ages 2 to 5 years.
• Observe all statements and warnings to reduce the likelihood of serious or fatal injury. Save this sheet for future reference.
• Indoor use recommended only if environment is free of obstacles & obstructions.
• Maximum weight: 50lbs (22.68kg). Limit 1 rider.
• Instruct children:
  • Not to use product until properly assembled.
  • To keep hands, feet, loose clothing and long hair away from the wheels during use.

Assembly Instructions

The roller coaster is assembled in stages. The following describes the connection of the main parts:

• Diagram 1: Shows the initial assembly of the roller coaster base and ramp sections. Part A, the starting ramp, connects with parts D and E.
• Diagram 2: Illustrates connecting curved track section B to the base ramp (Part A).
• Diagram 3: Depicts attaching another curved track section (Part C) to the previously connected section (Part B).
• Diagram 4: Shows the rider car (Part F) being placed onto the assembled roller coaster track.
• Parts A1, A2, B1, B2 are indicated on the final product, likely for decal placement or specific component identification.

Cleaning Instructions

General Cleaning: Use mild soapy water.

Decal Application

Clean and dry area thoroughly. Center decal in area. Apply pressure from center to outer edge.

Disposal Instructions

Please recycle when possible. Disposal must be in compliance with all government regulations.

Inspection and Maintenance

Inspect this product before each use. Tightly secure connections and replace damaged or worn components. Contact The Step2 Company, LLC. for replacement parts.

Customer Feedback

Thank you for purchasing the Step2® Anniversary Edition Up & Down Roller Coaster™. We'd appreciate a few minutes of your time to complete a brief survey so we can continue providing you with great products.

To participate, please visit our website at: www.step2.com/survey/?partnumber=863300

Thank you for your time,
Your friends at Step2.