AGPTEK Wireless Controller User Manual
Thank you for purchasing the AGPTEK product. Please read this [User Manual] carefully before using the product, and retain it in for future use. If you have any questions or suggestions about our products, please contact: support@agptek.com.
Package Contents
- Wireless Controller*2
- NES Wireless Receiver*2
- USB Wireless Receiver*2
- USB Cable*2
- User Manual*1
Product Details
USB Recharge Port
Start/Wakeup Button
Diagram Description:
- The diagram shows the controller with a USB Recharge Port and a Start/Wakeup Button.
- It also indicates connection ports: (1) NES Wireless Receiver (for NES Classic mini) and (2) USB Wireless Receiver (for Windows XP/7/8/10, Mac OS, Linux, Raspberry Pi).
- Link Indicate: Red LED
- Recharge Indicate: Blue LED
Fast Startup
Plug the adapter to Console/PC, then press the START button of Controller.
- Insert the receiver into the NES game console or PC.
- Press and hold the START+SELECT+UP for 1s until Red LED flashes quickly. At this point Controller is in pairing mode. After Red LED does not flash quickly, but stays on, which means the pairing between the receiver and controller is successful.
- If without any operations after 5s, Controller will enter into the standby mode. Red LED will turn off, and only the LED of NES Wireless Receiver will flash (USB Wireless Receive will not). You can activate the Controller via pressing any button.
- Controller will enter into sleep mode if there is no operations after 10 mins. You can press the Start button to wake up the controller.
- RESET Key = Press the START+SELECT at the same time.
Controller Working States
- Pairing Mode: Press and hold START+SELECT+UP for 1s until Red LED flashes quickly, which means Controller will enter into pairing mode.
- Link Mode: If Controller and Receiver connect successfully, Red LED will light up. At this moment, you can play games.
- Standby Mode: If without any operations after 5s, Controller will enter into standby mode, and LED will turn off. Press any one of buttons can wake it up.
- Sleep Mode: If without any operations after 10 mins, Controller will enter into sleep mode. Only START button can wake it up.
- Power off: When the batteries in your controller are dead, the controller will power off automatically.
LED Description
| Controller | NES Wireless Receiver | ||
|---|---|---|---|
| State | LED | State | LED |
| Controller and Receiver connect successfully | Red LED lights up | Controller and Receiver connect successfully | Red LED lights up |
| In standby or sleep mode | LED turns off | Standby or Sleep mode | Red LED flashes |
| In paring mode | Red LED flashes quickly | ||
| In charging | Blue LED lights up | ||
| Fully charged | Blue LED turns off | ||
Specifications
| Model | WC2 |
| Compatibility | NES Classic mini, Windows XP/7/8/10, Mac OS, Linux, Raspberry Pi |
| Charge method | Charge by 5V 500mA Charger, Charge by computer USB 2.0port. |
| Charge time | About 2H |
| Battery | 250mAH |
| Working time | 100H |
| Wireless transmission | 2.4GHz wireless connection |
| Bluetooth distance | ≤10m |
| Net weight | 62g |
Betriebszeit - Englisch-Übersetzung – Linguee Wörterbuch
