Volvo EC160E 1:16 RC Excavator User Manual

Remote Control Introduction

The remote control features:

• Left Track Forward/Backward
• Right Track Forward/Backward
• Up/Down Arm Control
• Left/Right Body Rotations
• Up/Down Boom Control
• Dig/Unload
• Horn Button
• Sounds On/Off

The remote control operates on 2.4GHz Full Proportional Control.

Installing Batteries

For Remote Control:

1. Remove the battery compartment door at the back of the remote control.
2. Install 3 pcs of 1.5V AA batteries in the correct polarity as indicated.
3. Reinstall the battery door and fix it with the screw.

For Vehicle:

1. Remove the battery compartment door at the back of the vehicle.
2. Install 1 pc of 7.4V rechargeable battery in the correct polarity as indicated.
3. Reinstall the battery door and fix it with the screw.

Battery Charging

Charging the battery:

• The vehicle battery charging time is about 3 hours. Do not charge more than 8 hours.
• Connect the battery to the USB charger. The indicator light will start flashing, indicating that the battery is being charged.
• Disconnect the battery from the charger once the indicator light is off.

Notice:

• Always turn off the set and remove the batteries when the vehicle is not in use and when it is being stored.
• Take good care of the charging line and avoid using it with other batteries.
• When the USB charger is connected to the power output, the indicator light will glow.

Precautions For Battery Use

1. Battery needs to be charged for the first time use.
2. Rechargeable batteries are to be removed from the toy before being charged.
3. The toy battery charging time is about 3 hours. Do not charge more than 8 hours.
4. Batteries are to be inserted with the correct polarity.
5. Non-rechargeable batteries are not to be recharged.
6. Rechargeable batteries are only to be charged under adult supervision.
7. Different types of batteries or new and used batteries are not to be mixed.
8. Exhausted batteries are to be removed from the toy.
9. The toy is not to be connected to more than the recommended number of power supplies.
10. The supply terminals are not to be short-circuited.
11. Regularly inspect the battery, cord, plug, enclosure and other parts. Do not use if damaged.

2.4GHz Pairing Procedure

1. Install the batteries into the vehicle and the remote control. Turn on the remote control and the vehicle. The pairing procedure will start automatically. The remote control indicator light will turn off and the vehicle will emit a double beep indicating that the pairing procedure was successful.
2. The remote control can be paired only with one vehicle at once. Each set has an interference-free system.
3. To re-pair the set, restart the remote control and the vehicle.

Vehicle Start

• To turn on the vehicle, press the start key. The vehicle will emit a sound indicating that the idling mode has been activated.
• To turn off the vehicle, press the start button one more time.

Sounds Control

• Horn Button: Horn feature works after the vehicle is turned on. Press the button to emit horn sound.
• Sounds On/Off: The sounds feature works after the vehicle is turned on. Press the button to turn on/off sounds.

Full Proportional Operation Instructions

• Arm Control: Move the left stick up/down to control the arm movement.
• Boom Control: Move the right stick up/down to control the boom.
• Dig/Unload: Move the right stick left/right to control the bucket.
• Body Rotations: Move the left stick left/right to control the rotation of the upper body of the vehicle.
• Driving: Use both sliders for driving. Move them forward to drive forward, and backward to drive backward.
• Steering: Use each slider individually for steering.

Jackhammer Control | Grabber Control

Jackhammer Control: Install the hammer and insert the plug as shown in the picture. Press the Hammer Button to operate.

Grabber Control: Install the grabber and insert the plug as shown in the picture. Press the Grabber Button to operate.

Troubleshooting

Notice

1. Do not play this toy on roads or crowded places to avoid danger.
2. Do not play this product in stagnant water, as it may short-circuit the circuit and damage it.
3. The surface of the product should be kept clean. If it is dirty, use a clean and soft cloth to wipe the stains on the surface of the toy.
4. The vehicle speed slows down significantly during operation, and the battery may be insufficient. Please charge in time.

Contents

• RC Excavator
• Metal Jackhummer
• Grabber
• 2.4GHz Transmitter
• 7.4V Battery
• USB Charger
• Screwdriver
• Mini Basketball

Compliance Information

Frequency bands: 2402MHz to 2475MHz

Maximum output power: -2.49dBm (for EU compliance)

Manufacturer: Doubleeagle Industry (China) Limited. Address: Xingda Industrial Park, Chenghai District, Shantou City, Guangdong Province, China.

Importer: JAMARA e.K. Address: Inh. Manuel Natterer Am Lauerbuhl 5, DE-88317 Aichstetten, Germany.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

MODIFICATION: Any changes or modifications not expressly approved by the grantee of this device could void the user's authority to operate the device.

General Precautions

Please read this manual carefully before operation.

Please retain packaging for future reference as it contains important information.