AOSU Video Doorbell Pro and Wi-Fi HomeBase
Quick Start Guide
What's Included
- ? Video Doorbell Pro
- ? Mounting Bracket
- ? Screw Hole Positioning-Card
- ? Doorbell Detaching Pin
- ? Wi-Fi HomeBase
- ? Phillips-Head Screwdriver
- ? USB-C Charging Cable
- ?️ Security Sticker
- ? Screw Packs
- ? Wi-Fi HomeBase Power Pin (includes plug types for different regions)
- ? Quick Start Guide
Product Overview
Video Doorbell (Battery or Hardwired)
The Video Doorbell Pro features:
- Motion Sensor
- Camera Lens
- Microphone
- Doorbell Circular Light
- Doorbell Button
- Speaker
- Detaching Mechanism
- USB-C Charging Port
Operation Guide:
| Operation | How-to |
|---|---|
| Power on the doorbell | Press and release the SYNC button |
| Power off the doorbell | Press and hold the SYNC button for 3 seconds. |
| Reset the doorbell | Press and hold the SYNC button for 10 seconds. |
| Connect to Wi-Fi network | Press and hold the SYNC button until you hear a beep |
Wi-Fi HomeBase
The Wi-Fi HomeBase features:
- SYNC Button
- Status LED
- Micro SD Card Slot
- Wi-Fi Antennas
- Speaker
- Power Pin
How The System Works
The video doorbell system includes two main parts:
- The video doorbell installed at your door.
- The Wi-Fi Homebase located inside your house.
The video doorbell detects motion at your porch and allows you to answer the door anytime, anywhere. The Wi-Fi Homebase stores video clips on a microSD card (user-provided) and functions as an indoor digital chime. When someone rings the doorbell, people inside the house will be notified.
System Diagram Description: A two-story house illustration shows the Video Doorbell mounted on the exterior front door and the Wi-Fi HomeBase connected to a power outlet inside the house, with Wi-Fi antennas extended.
Powering on the Wi-Fi HomeBase
- Fix the power connector to Wi-Fi Homebase:
- Place the power connector over the Wi-Fi Homebase in the direction indicated by the arrows.
- Align the raised slots of the power connector with the notch on the base of the Wi-Fi Homebase.
- Rotate clockwise to lock the power connector in place.
- Extend Wi-Fi Homebase's antennas.
- Plug Wi-Fi Homebase into an AC power supply at your desired location. The LED indicator turns solid green when the doorbell chime is ready for setup.
Connection Diagram Description: Three steps are illustrated: 1. A power connector being attached to the Wi-Fi HomeBase. 2. The Wi-Fi HomeBase with the connector attached, showing the 'OPEN' and 'LOCK' positions. 3. The Wi-Fi HomeBase plugged into a wall outlet.
Setting up the System
Download the App and Set up the System:
- Download the AOSU App from the App Store (for iOS devices) or Google Play (for Android devices).
- Scan the QR code provided in the documentation or search for "AOSU" in the App Store or Google Play.
Register or log into the App. Add the Video Doorbell and scan the QR code for the installation process.
Charging Your Doorbell
The doorbell comes with a 70% battery level for safe transportation. Fully charge it before mounting the doorbell at your front door.
Charging Diagram Description: The doorbell is shown with a battery icon indicating charge level. An arrow points from a USB-C port on the doorbell to a USB power source. A clock icon indicates a charging time of 4-6 months (this seems like battery life, not charging time - need to clarify with next page). The text below clarifies battery life.
Notice: The battery life varies depending on usage. In most common cases, a doorbell may have up to 10 events per day, with each recording lasting 20 seconds on average. Under these conditions, the doorbell battery life can last up to 6 months.
Finding a Mounting Spot
Take the Video Doorbell to your front door and check the live view on the AOSU App simultaneously. Find a position that provides the desired field of view. Consider the following factors:
- Check if you can reuse existing holes and anchors on the wall or door frame.
- If placing the doorbell close to a side wall, ensure the wall does not appear in the field of view. Otherwise, IR light may reflect, causing blurry night vision.
- If drilling mounting holes for the first time, the recommended mounting height is 48 inches (1.2 meters) from the ground.
Place the Screw Hole Positioning Card against the wall to mark the position.
Mounting Height Diagram Description: An illustration shows two figures at a doorway. One figure is approximately 1.76m (5'9") tall. The recommended mounting height for the doorbell is marked at 1.2m (48") from the ground. Another diagram shows the doorbell's field of view from a side wall perspective.
Mounting the Bracket
If mounting on hard materials like brick, concrete, or stucco, drill two holes using the Screw Hole Positioning Card and a 15/64" (6mm) drill bit. Insert the provided anchors, then use the provided long screws to secure the Mounting Bracket to the wall.
What is required: Power Drill (not provided), 15/64″(6mm) Drill Bit, Mounting Bracket, Screw Packs (spare screws and anchors are included).
Mounting Diagram Description: Two configurations are shown: "Without 15° Mounting Wedge" and "With 15° Mounting Wedge". Both show the Mounting Bracket being secured to a wall with screws. The second diagram includes a wedge behind the bracket.
Required Tools/Parts Description: Icons depict a Power Drill (not provided), a Mounting Bracket (potentially attached to a mounting wedge), and Screw Packs.
Mounting the Doorbell
Align the doorbell with the top of the mount and snap the bottom into place.
Mounting Diagram Description: The doorbell is shown aligning with the top of the mounting bracket, then being pushed downwards to snap into place, indicated by numbered arrows (1 for top alignment, 2 for snapping the bottom).
You're all set! If you need to detach or recharge the doorbell, refer to the following sections.
Detaching the Doorbell
Use the doorbell detaching pin provided to detach the doorbell from the Mounting Bracket.
- Insert and press the detaching pin into the hole located on the bottom of the doorbell.
- Lift to detach the bottom of the doorbell.
What is required: Doorbell Detaching Pin.
Detaching Diagram Description: An illustration shows the detaching pin being inserted into the bottom hole of the doorbell. A close-up view highlights the pin in the hole. Another view shows the doorbell being tilted away from the wall after detachment.
Recharging the Doorbell
Charge the doorbell using universal USB chargers that deliver 5V 1A/2A output.
Charging Diagram Description: A USB cable connects a power source (represented by a wall plug) to the USB-C port on the doorbell, with a battery icon indicating charging.
| LED indication | Status |
|---|---|
| Charging | The blue light flashes |
| Fully charged | Solid blue |
Charging time: 6 hours from 0% to 100%.
Notice
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment causes harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: (1) Reorient or relocate the receiving antenna. (2) Increase the separation between the equipment and receiver. (3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. (4) Consult the dealer or an experienced radio/TV technician for help.
FCC Radio Frequency Exposure Statement
The device has been evaluated to meet general RF exposure requirements. The device can be used in fixed/mobile exposure conditions. The minimum separation distance is 20cm.
Declaration of Conformity
CE This product complies with the radio interference requirements of the European Community.
Hereby, Glazero Limited declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. For the declaration of conformity, visit the website: https://www.aosulife.com/. This product can be used across EU member states.
Do not use the Device in environments with extreme temperatures (too high or too low), or expose it to strong sunshine or excessively wet conditions.
- The suitable temperature for the HomeBase and accessories is -10°C to 45°C.
- The suitable temperature for the Video Doorbell and accessories is -20°C to 40°C.
When charging, place the device in an environment with normal room temperature and good ventilation. It is recommended to charge the device in an environment with a temperature ranging from 5°C to 25°C.
RF exposure information: The Maximum Permissible Exposure (MPE) level has been calculated based on a distance of d=20 cm between the device and the human body. To maintain compliance with RF exposure requirements, use the product maintaining a 20cm distance between the device and human body.
- For HomeBase: Wi-Fi Operating Frequency Range: 2412~2472MHz; Wifi Max Output Power: 17.13dBm(EIRP)
- Wi-Fi Operating Frequency Range: 5150MHz~5850MHz, Wifi Max Output Power: 13.7dBm(EIRP)
- For Video Doorbell: Wi-Fi Operating Frequency Range: 2412~2472MHz; Wi-Fi Max Output Power: 18.30 dBm
Recycling and Battery Warning
[Recycling symbol] This product is designed and manufactured with high quality materials and components, which can be recycled and reused.
[Crossed-out trash bin symbol] This symbol means the product must not be discarded as household waste and should be delivered to an appropriate collection facility for recycling. Proper disposal and recycling help protect natural resources, human health, and the environment. For more information on disposal and recycling of this product, contact your local municipality, disposal service, or the shop where you bought this product.
⚠️ Battery warning:
- Replacement of a battery with an incorrect type can defeat a safeguard (for example, in the case of some lithium battery types).
- Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, can result in an explosion.
- Leaving a battery in an extremely high temperature surrounding environment can result in an explosion or the leakage of flammable liquid or gas.
- A battery subjected to extremely low air pressure may result in an explosion or the leakage of flammable liquid or gas.
Customer Service
Warranty
12-month limited warranty (The actual warranty period shall be implemented according to the requirements of local laws and regulations).
Email Us
Customer Support: support@aosulife.com
Call Us
- United States: 1-866-905-9950 (Mon-Fri 9AM-5PM)
- United Kingdom: +44 203885 0830 (Mon-Fri 9AM-5PM GMT)
- Germany: +49 32221094692 (Mon-Fri 9:00-17:00)
[Facebook] Facebook: @aosulife
[Twitter] Twitter: @aosulife
[YouTube] YouTube: @aosulife
