Important Information
For further information and to download additional details in your language, please visit the official Candy service website: go.he.services/smart-bi
3. Settings and Control Panel Overview
The control panel features a digital display and various buttons and a program selector dial to manage your washing machine settings.
Display and Indicators:
- Digital Display: Shows spin speed (e.g., 1400 rpm) and remaining time (e.g., 0:59 minutes).
- Load Indicator: Displays maximum load capacity in kilograms (kg).
- Temperature Indicator: Shows selected wash temperature (°C).
- Spin Speed Indicator: Shows selected spin speed (rpm).
- Options Indicators: Various icons for selected options.
- Door Lock Indicator: ? Indicates when the door is locked.
Key Settings and Options:
- Temperature Selection: Adjust wash temperature (e.g., 90°C, 60°C, 40°C, 30°C, 20°C).
- Spin Speed Selection: Adjust spin speed (e.g., 1400 rpm, 1000 rpm).
- Additional Options:
- +5 Kg: Likely for adding extra load.
- ECO 40-60: Energy-efficient program for cottons at 40°C or 60°C.
- ECO +2: Additional eco-friendly option.
Program Matrix (Example):
This table illustrates various program settings and their suitability or values for different load capacities. Specific details may vary by model and full manual.
| Setting/Program | 3.5 kg Load | 4 kg Load | 4.5 kg Load | 5 kg Load |
|---|---|---|---|---|
| 30°C | • | • | • | |
| 20°C | • | • | • | |
| ECO 40-60 | • | • | • | |
| ECO +2 | 5 | 5 | 5 | 5 |
| 30°C | 1 | 2 | 2 | |
| 60°C | Δ | Δ | Δ | |
| 40°C | 3.5 | 4 | 4.5 | |
| 60°C | • | • | • | |
| 40°C | 2.5 | 2.5 | 2.5 | |
| 30°C | 1 | 1.5 | 1.5 | |
| 30°C | 2.5 | 2.5 | 2.5 | |
| 40°C | 3.5 | 3.5 | 3.5 | |
| 40°C | 3.5 | 4 | 4.5 |
1. Installation Guide
Unpacking and Leveling
- Unpack the Appliance: Carefully remove the washing machine from its packaging.
- Remove Transit Bolts: Locate and remove the transit screws/bolts from the rear of the appliance using a wrench. These bolts secure the drum during transport and must be removed before use.
- Remove Spacers: Remove any plastic spacers associated with the transit bolts.
- Insert Caps: Insert the provided plastic caps into the holes where the transit bolts were removed.
- Level the Appliance: Adjust the feet at the bottom of the washing machine using a wrench to ensure it is perfectly level and stable on the floor. Proper leveling prevents vibrations and noise during operation.
Water Connections
- Connect Water Inlet Hose: Connect the water inlet hose to the cold water tap. Ensure a secure, leak-free connection.
- Position Drain Hose: The drain hose should be positioned at a height between 50 cm (minimum) and 85 cm (maximum) from the floor. Ensure the hose is not kinked or obstructed. It can be placed into a sink or a standpipe. For an overflow vent, ensure a minimum of 4 cm clearance and a maximum height of 100 cm.
Power Connection
- Connect to Power Supply: Plug the appliance into a suitable electrical outlet. Ensure the power cord is not trapped or damaged.
2. Programs and Detergent Dispenser
Detergent Dispenser Compartments:
The detergent dispenser typically has three compartments:
- Compartment A: For prewash detergent.
- Compartment B: For fabric softeners.
- Compartment C: For main wash detergent.
Program Selector and Display:
The program selector dial allows users to choose various wash cycles. The digital display shows the selected program's spin speed and remaining time.
Example programs often include:
- Cotton ?
- Synthetics ?
- Delicates ?
- Wool ?
- Rinse ?
- Spin ?
- Drain ⬇️
- ECO 40-60 (Energy-efficient program)
- Other specialized programs indicated by various icons on the dial.
