Introduction

You can use Havana Pro with a tablet, notebook, and many types of smartphones to stream music and enjoy handsfree calling. In order to get the best results when using the device, please read this manual first.

Package Contents

• 1x Havana Pro
• 1x USB Charging cable
• 1x Aux Cable
• 1x Wall Charger
• 1x User Manual

Important Safety Precautions

When using your Bluetooth Mobile Speaker, basic safety precautions should always be followed, including the following:

1. Keep this product and its charging cable away from excessive heat.
2. Do not operate this device with a damaged cable or after it has malfunctioned or has been damaged in any manner.
3. Do not disassemble your device.

Charging Your Speaker

1. Connect one end of the included USB Charging Cable to the Charging Port on your speaker. Then plug the other end of the USB Charging Cable into a Wall Charger.

NOTE: The internal battery of your speaker takes approximately three hours to charge when completely drained.

2. When charging, the LED light will flash to indicate that the unit is charging. 3 orange lights will be lit when your unit is fully charged.

Power On / Power Off

Power On: Press and Hold the main button for 2 seconds to power on the speaker, then the working status LED will flash.

Power Off: Press and Hold the main button for 2 seconds to power off the speaker, then the working status LED will be off.

Pairing Bluetooth Devices to Your Speaker

In order to pair your Bluetooth audio device to your Bluetooth Speaker for the first time, follow the steps below:

1. Make sure your Bluetooth audio source is close to your speaker.
2. Press the main button for 2 seconds to power on the speaker; the working status LED will flash.
3. Activate the Bluetooth function on your Bluetooth device (phone or music device). Please refer to the manufacturer's instructions.
4. Search Bluetooth devices and select "Havana Pro". If required, enter the password '0000' to confirm & finalize pairing.
5. When the pairing is successful, you will hear a sound confirming. A white light will be solid and your device will show the connected Bluetooth icon.

Bluetooth Music Play

1. Open the music player, select a song to play, tap the ▶️ button to pause music and then tap again to resume music.

2. To increase volume, touch and hold the + button. To skip to the next song, double tap the + button.

3. To decrease volume, touch and hold the - button. To skip to the previous song, double tap the - button.

Bluetooth Phone Call

1. To answer an incoming call, tap the ? button. To end the call, tap the ? button again.

2. Only the Master speaker can answer the call phone.

Aux-in Mode

1. Connect the speaker and mobile phone or computer using the provided Aux-in cable.

2. Tap the ▶️ button to play music and then tap again to mute music.

Noted: When switched to Aux-in mode, + / - can only control the volume.

Battery Status

1. Short press the main button (represented by O in diagrams) to indicate the battery status.

Multi-Speaker Pairing (Music Play)

If you own 2 or more Havana Pro Speakers (you can pair up to 40 devices!), you can pair these together for ultimate sound or setting up multi-room audio. It is important to understand how this process works. As you can see above, one unit becomes the "Master Speaker" which is the speaker that connects to your device. The affectionately named "Slave units" are then sent the audio from the master speaker once paired and turned on.

1. Ensure only one Havana Pro is turned on. Pair to this speaker if setting up from new, or if you are already paired then move to the next step.
2. Power on your additional speaker (one at a time if pairing more than 2).
3. Hold the Bluetooth button down for 3 seconds on the MASTER speaker.
4. Now hold the Bluetooth button down for 3 seconds on the additional speaker.
5. You should hear confirmation and a blue LED will illuminate. Music will now play from both speakers. Note: The volume can be changed for each speaker independently by using the volume buttons on top.
6. For additional speakers, continue from step 2.

Each time you turn a slave speaker on, it will automatically connect to the master speaker.

Phone Call (Multi-Speaker)

1. Tap the ? button to answer an incoming call, tap the ? button again to end the call.

2. Only the Master speaker can answer the call phone.

Reset

The Bluetooth speakers are designed to pair any one of them. This flexibility of design allows you to freely pair any speakers and make them yours.

Touch and hold the ▶️ button to reset the speaker and then follow the step you want.

Waterproof

Havana Pro is IP67, it can be immersed in 1 meter of water for up to 30 minutes; you can follow the fun wherever it takes you.

IMPORTANT: To ensure that the Havana Pro is waterproof, please remove all cable connections and tightly close the cap; exposing the Havana Pro to liquids without doing so may result in permanent damage to the speaker. And do not expose Havana Pro to water while charging, as doing so may result in permanent damage to the speaker or power source.

Specifications

• Bluetooth version: V5.0
• Maximum Output: 20W
• Built-in Power: Li-ion 2500mAh
• SNR: >75dB
• Wireless Working Frequency: 80Hz-20KHz
• Wireless Transmission Distance: up to 15M
• Charging Time: approx. 3 hours
• Playback Time: 7-9 hours
• Charging: DC 5 V± 0.5/700mA
• Size: Dia 79mm*79mm*180mm

Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

EFM® will happily repair or replace defective goods for up to 2 years from the date of purchase. This warranty is against defects in the EFM® goods purchased and does not cover damage caused by the incorrect use or installation of the goods, or by modifications, or by accident.

To claim under the warranty, you need to return the faulty product to the place of purchase (at your expense) with a valid proof of purchase. If you are not able to return the product to the place of purchase, you can contact:

Important: The 2 Year Warranty covers EFM® product and not your device. Whilst we stand by our products, EFM® will not be liable to any damages caused to your device from accidental impact. For more information visit myefm.com/warranty-support.