HOMMIE YET-T1 Bluetooth Adapter User Manual

Bluetooth Adapter Introduction

This section provides an overview of the HOMMIE Bluetooth Adapter.

Device Overview

Front View: Displays "TX:LINE Search device Vol:30". Side View: Shows buttons labeled 1, 2, 3, and interface 4.

Button Functions

TX: Transmitter | RX: Receiver
Screen: Three-line display showing TX/RX Mode, Searched Device, and Volume.
Left Button (1):
- Press once: Previous song/Up
- Long press: Volume -
Middle Button (2):
- Long press: Switch TX/RX mode
Right Button (3):
- Press once: Next song/Down
- Long press: Volume +
3.5mm Audio Interface (4)

Usage Instructions

Use on TV to Pair with Bluetooth Headphone or Bluetooth Speaker

Connection Diagram: Illustrates connecting the adapter to a TV via USB and audio out, then to Bluetooth headphones or speakers. Shows TV ports including antenna, audio out, USB2.0, AV Input, HDMI2.0 (ARC), and NET.

Plug the USB end of the adapter into the USB port of the TV or a USB charger.
Connect the 3.5mm audio cable to the audio output interface of the TV.
Keep the Bluetooth headphone/speaker in pairing mode within 30cm of the adapter.
On the TV screen, use the left and right buttons to select the Bluetooth device to connect. The device name will appear in white. Press the middle button to confirm pairing; the device name will then appear in green.
Use the left or right button to switch to the previous or next song. Long press either button to adjust the volume.

Note: TV Settings: Some TVs require specific audio output settings. Differences may exist between TV models (example shown for Letv TV).

Some TVs may automatically mute their sound after settings are applied, or require manual muting via the remote control.

Use on PC to Pair with Bluetooth Headphone or Bluetooth Speaker

Connection Diagram: Shows the adapter plugged into a PC's USB port.

Plug the Bluetooth adapter into the USB interface of the PC. No audio cable is needed.
Refer to steps 3.4.5 under "Use on TV" for connecting Bluetooth headphones/speakers.

Note: If the Bluetooth headphone/speaker has no sound after pairing, go to Start -> Settings -> System -> Sound and select "YET-T1" as the output device on your computer.

Use on Sono/Speaker/Car to Pair with Smartphone

Connection Diagram: Shows the adapter connected via 3.5mm audio cable to a car stereo or speaker system, and powered via USB.

Use the 3.5mm audio cable to connect the adapter and the Sono/speaker/car via the 3.5mm interface.
Plug the USB end of the adapter into a USB port or USB charger for power supply.
Long press the middle button to switch the adapter to RX mode.
Turn on your mobile phone's Bluetooth, search for "YET-T1", click, and pair.
Use the left or right button to switch to the previous or next song. Long press either button to adjust the volume.

Troubleshooting

1. Fail to connect?

A: Please confirm that the Bluetooth device is within 30cm of the adapter and is in pairing mode. Unplug the adapter and try again.

2. The soundtrack is not in sync with the picture (delay)?

A: The adapter's delay error is approximately 60ms. It is recommended to use CSR devices and Apple earphones for the Bluetooth device.

3. There is noise?

A: The product should only be used with the provided shielded audio cable to minimize noise interference. Using other audio cables cannot guarantee the effect.

4. Can't transfer files?

A: This adapter can only connect to audio equipment for playing music; file transfer is not supported.

	Hommie L3 Smart Watch User Manual User manual for the Hommie L3 Smart Watch, covering setup, features, and specifications. Learn how to connect, use, and maintain your L3 Smart Watch for optimal performance.
	Hommie Smart Wristband User Manual Comprehensive user manual for the Hommie Smart Wristband, detailing setup, features, and app integration. Learn how to use your smart bracelet for fitness tracking, heart rate monitoring, and more.
	Hommie X3 Smart Watch User Manual: Features, Setup, and Usage Guide Comprehensive user manual for the Hommie X3 Smart Watch. Learn about its features like heart rate monitoring, pedometer, sleep tracking, multi-sport modes, app connectivity, and specifications. Get started with your new smartwatch.
	Hommie USB Digital Tester User Manual - Voltage, Current, Power Measurement Comprehensive user manual for the Hommie USB Digital Tester (Model J7-C). Learn how to measure voltage, current, power, capacity, and time for USB devices. Includes operation guides, protection settings, and calibration instructions.
	HOMMIE LED Mirror Light User Manual - Installation and Specifications Comprehensive user manual for the HOMMIE LED Mirror Light (Model: MLT-BXG-050), covering specifications, mounting instructions for walls, cabinets, and above mirrors, and electrical wiring guides. Includes safety checks and power-on procedures.