Viconics / Schneider Electric
Viconics Thermostats – Blackhawk Supply
CATALOG SE8000 and SE7000 Series Room Controllers Version 10 2 Schneider Electric Room Controllers bridge the gap between the cost of stand-alone thermostats, and the performance of DDC systems, by simplifying installation and commissioning, to control Rooftop units, fan coil units, terminal units and heat pump applications, for a wide variety of facilities. Commercial Retail Healthcare Hotels Education 028-6155-10_Catalog-SE8000-SE7000_EN www.schneider-electric.com/buildings September 2019 3 SE8000 or SE7000 Common features Easy to install No need to interrupt operations when installing room controllers. You can re-use existing wiring or communicate wirelessly to sensors and gateways, thereby lowering installation costs and keeping downtime in check. Precise comfort Room controllers look like thermostats, but work like controllers. They deliver the optimal level of comfort while maximizing savings on energy and operational costs. Easy to commission No need for software or other tools. Commissioning is done by configuration through the user interface of the room controller, thereby saving on engineering time and cost. scheduling features. Easy to scale The native connectivity of room controllers enables upstream connection to a wide variety of Building Management Systems (BMS), and downstream connection to wired and wireless sensors. Powerful control Get the most out of your HVAC systems with the application-specific control and PID algorithms native to room controllers. You can also optimize your space by using the optional occupancy detection and Significant savings Room controllers provide an accelerated return on investment with savings at all levels: installation, commissioning, energy optimization, and maintenance. Optional on-board relative humidity sensor Optional on-board PIR motion sensor The power to choose for customers who need more. > Wi-Fi IP ready > Over 70 design combinations with selectable casings, fascias, and display color schemes, to match any décor. > Customizable user interface, selectable languages, and advanced BACnet messaging for an unparalleled guest experience. > Highlight your brand by uploading a custom standby image or logo on the user interface. > Programmable with Lua4RC to modify control sequences, or override inputs and outputs. Simply the most cost-effective option on the market. 028-6155-10_Catalog-SE8000-SE7000_EN www.schneider-electric.com/buildings September 2019 4 Table of contents SE8000 Series room controllers SEZ8250.............................................................................. 9 SER8300.............................................................................10 SE8300...............................................................................11 SE8600...............................................................................12 Wireless accessories and specifications............................13 Fascias...............................................................................16 SE7000 Series room controllers SE7200...............................................................................19 SE7300.............................................................................. 20 SE7300-ECM..................................................................... 20 SER7300............................................................................ 21 SE7600.............................................................................. 23 SE7656E............................................................................ 25 SE7652F............................................................................ 25 SE7652H............................................................................ 25 SE7652W........................................................................... 26 SEZ7000............................................................................ 27 VH7200.............................................................................. 28 Wireless accessories and specifications........................... 29 Relay Packs VC3000.............................................................................. 39 VC1300.............................................................................. 40 VC2300.............................................................................. 40 Not all products in the catalogue may be available in every country, please check availability with the local Schneider Electric office. 028-6155-10_Catalog-SE8000-SE7000_EN www.schneider-electric.com/buildings September 2019 Reduce energy waste & improve comfort. Accelerate your return on investment with easy to install and commission room controllers 6 Cost-saving, energy-saving applications From hotels and hospitals to schools, retail, and commercial buildings, Schneider Electric offers wide-ranging room control solutions for your building management needs. Whether retrofitting current systems with a more technologically advanced room controller or going green with a more environmentally friendly option, Schneider Electric has the ideal, cost-competitive solution. Our room controllers can be equipped with an integrated passive infrared motion sensor for demandbased occupancy control that opens up new opportunities in smart energy management. Open communications Advance control of your building with truly open, integrated communications. Open protocol options include ZigBee® wireless, BACnet® and Modbus infrastructures. Wi-Fi connectivity is now available. Lower total install cost Accelerate your return on investment by saving time and resources from the beginning. Our easy-to-install systems integrate into any new or existing building, with no requirement for costly, specialised labor. Efficient control Take full control of your building's HVAC equipment. We'll make it simple with intuitive, application-based products specifically designed for your needs. Occupancy sensing Equip your room controller with an integrated passive infrared motion sensor for demand-based occupancy control that raises your energy efficiency to a whole new level. Energy savings Save energy. Save money. With our series of room controllers you'll reduce energy costs without sacrificing comfort one bit. Temperature and humidity sensing Deliver efficient, measurable control. If you can measure it, you can control it -- providing more precise occupant comfort and productivity. 028-6155-10_Catalog-SE8000-SE7000_EN www.schneider-electric.com/buildings September 2019 SE8000 Series Room Controllers 8 The perfect balance between simplicity and sophistication The SE8000 Series is a sophisticated addition to the Schneider Electric portfolio of room controllers. With rich, customizable features, the SE8000 Series enables significant energy savings with accurate temperature control in any space. The SE8000 room controllers can be easily integrated into most Building Management Systems (BMS). Configurable languages Configurable color schemes 2018.04.18 12:54 PM 2018.04.18 12:54 PM 2018.04.18 12:54 PM 2018.04.18 12:54 PM 2018.04.18 12:54 PM Configurable user interface Common features · Configurable sequence of operations · BACnet Change of value (COV), MS/TP or Modbus RTU · Scheduler · Programmable with Lua4RC to modify control sequences or override inputs and outputs · On-board relative humidity sensor with dehumidification control sequences · Optional on-board PIR motion sensor with occupancy-based control sequences · On-board or plug-in ZigBee Pro module · Wi-Fi connectivity via plug-in module · Firmware updates via USB Orderable Fascias SEZ8250 SER8300 Series (with SC3000) > > Variable Air Volume Line voltage fan coil (VAV) units units Variable Air Volume (VAV) units · Pressure dependent and independent VAV system · Fan speed and sequence of operation · Two pipe · Four pipe · ECM or On/Off fan control · Duct and/or baseboard heaters Line voltage fan coil units · Requires SC3000 relay pack · Fan speed and sequence of operation · Two pipe · Four pipe · ECM fan control SE8300 Series > Low voltage fan coil units > Mixed voltage fan coil units > Zone control Low voltage fan coil units · Fan speed and sequence of operation · Two pipe · Four pipe · ECM fan control Mixed voltage fan coil units · Requires SC1300/SC2300 relay pack SE8600 Series > Rooftop units > Heat pumps > Indoor air quality Rooftop units, heat pumps and indoor air quality · Economizer · CO2 sensor input · Fresh Air Station input Configurable stages · 1 heat/1 cool · 2 heat/2 cool · Modulation heat/2 cool · 3 heat/2 cool 028-6155-10_Catalog-SE8000-SE7000_EN www.schneider-electric.com/buildings September 2019 9 Digital stand-alone and communicating room controllers SEZ8250 | Variable Air Volume (VAV) controller This SEZ8250 terminal equipment controller provides an easy solution for retrofitting fan coil unit thermostats without requiring other components such as relays, transformers, controllers, sensors, and network wiring to be upgraded. Existing line voltage wiring between the fan coil unit and temperature Controller can be reused further minimizing overall labor and installation costs for both retrofit and new construction control projects. Additional flexibility and energy savings can be achieved with optional wireless door, window, motion and water leak sensors. An elegantly simple casing combines with configurable screen colors to match decor. Display your own logo and custom messages on screen to reinforce your brand and provide a more enjoyable occupant experience. Description Dimension Power Voltage (SER8000) Voltage (SC3000) Communication Protocol Height: 12cm/4.72in / Width: 8.6cm/3.38in / Depth: 2.5cm/1in 6.5 - 28 Vdc or 20 - 28 Vac, 50/60Hz / 2.4 watts minimum 90 - 277 Vac universal, 50/60Hz BACnet MS/TP, or Modbus RTU ZigBee Pro (with VCM8000V5000P or on-board ZigBee) BACnet/IP and email notification via Wi-Fi (with VCM8002V5031) Product highlights · Elegant style combinations, designed to complement any decor · Customizable color digital touch screen interface with multi-language support · 2 Pipe or 4 Pipe configuration · ECM or On/Off fan control · Variable Air Volume (VAV) applications · On board configuration interface utility · Alarm monitoring · Suitable for both commercial and hospitality markets and systems · Fully programmable control sequences using scripting · Configurable fan sequence of operation · Configurable scheduler · Change of value (COV) function for BMS integration · Humidity sensor · Configurable I/O · Optional PIR motion sensor · Advanced occupancy functions for commercial and lodging applications · Optional wireless door, window, motion and water leak sensors available Communication · BACnet MS/TP or Modbus RTU (user selectable) · ZigBee Pro (P) option for direct MPM integration (On-board or plug-in ZigBee Pro wireless module) · BACnet/IP and email notification via Wi-Fi (with VCM8002V5031) Facias This model can be ordered with silver or white Fascia, and can be customized with many different Fascias. Refer to the Fascia page for more information (later in this document). Accessories · CO2 sensor module · CO2/temperature/humidity sensor · ZigBee wireless window, door, motion and water leak sensors Part Number SEZ8250U0B00 SEZ8250U5B00 SEZ8250U5B00P SEZ8250U0B11 SEZ8250U5B11 SEZ8250U5B11P Description BACnet MS/TP VAV Pressure Dependant/Independant Controller X VAV Pressure Dependant/Independant Controller X VAV Pressure Dependant/Independant Controller X VAV Pressure Dependant/Independant Controller X VAV Pressure Dependant/Independant Controller X VAV Pressure Dependant/Independant Controller X PIR motion sensor ZigBee Pro on-board Fascia & casing No* Silver X No* Silver X X Silver No* White X No* White X X White *Note: ZigBee Pro plug-in module is available Schneider Electric | 028-6155-10_Catalog-SE8000-SE7000_EN www.schneider-electric.com/buildings September 2019 10 Digital stand-alone and communicating room controllers SER8300 | Line-voltage fan coil controller with SC3000 relay pack This two component retrofit option consists of the SER8300 terminal equipment controller and the SC3000 relay pack (refer to "Relay Packs" on page 38 for more information). Together, they provide an easy solution for retrofitting fan coil unit thermostats without requiring other components such as relays, transformers, controllers, sensors, and network wiring to be upgraded. Existing line voltage wiring between the fan coil unit and temperature Controller can be reused further minimizing overall labor and installation costs for both retrofit and new construction control projects. Additional flexibility and energy savings can be achieved with optional wireless door, window, motion and water leak sensors. An elegantly simple casing combines with configurable screen colors to match decor. Display your own logo and custom messages on screen to reinforce your brand and provide a more enjoyable occupant experience. Description Dimension Power Voltage (SER8000) Voltage (SC3000) Communication Protocol Height: 12cm/4.72in / Width: 8.6cm/3.38in / Depth: 2.5cm/1in 6.5 - 28 Vdc or 20 - 28 Vac, 50/60Hz / 2.4 watts minimum 90 - 277 Vac universal, 50/60Hz Stand-alone, BACnet MS/TP, or Modbus RTU ZigBee Pro (with VCM8000V5000P or on-board ZigBee) BACnet/IP and email notification via Wi-Fi (with VCM8002V5031) Product highlights · Elegant style combinations, designed to complement any decor · Customizable color digital touch screen interface with multi- language support · 2 Pipe or 4 Pipe configuration · ECM fan control · Line voltage applications · On board configuration interface utility · Alarm monitoring · Suitable for both commercial and hospitality markets and systems · Fully programmable control sequences using scripting · Configurable fan sequence of operation · Configurable scheduler · Change of value (COV) function for BMS integration · Humidity sensor with on-board dehumidification strategy · Configurable I/O · Optional PIR motion sensor · Advanced occupancy functions for commercial and lodging applications · Optional wireless door, window, motion and water leak sensors available Communication · BACnet MS/TP or Modbus RTU (user selectable) · ZigBee Pro (P) option for direct MPM integration (On-board or plug-in ZigBee Pro wireless module) · BACnet/IP and email notification via Wi-Fi (with VCM8002V5031) Facias This model can be ordered with silver or white Fascia, and can be customized with many different Fascias. Refer to the Fascia page for more information (later in this document). Accessories · The SC3000 relay pack is a necessary accessory for retrofit solution to use with the SER8300 room controller. Refer to the SC3000 page for more information (later in this document) · CO2 sensor module · CO2/temperature/humidity sensor · ZigBee wireless window, door, motion and water leak sensors Part Number SER8350A0B00 SER8350A5B00 SER8350A0B11 SER8350A5B11 SER8350A5B00P SER8350A5B11P Description Line voltage fan coil Controller Line voltage fan coil Controller Line voltage fan coil Controller Line voltage fan coil Controller Line voltage fan coil Controller Line voltage fan coil Controller BACnet MS/TP X X X X X X RH sensor & control X X X X X X PIR motion sensor ZigBee Pro on-board Fascia & casing No* Silver X No* Silver No* White X No* White X X Silver X X White *Note: ZigBee Pro plug-in module is available Schneider Electric | 028-6155-10_Catalog-SE8000-SE7000_EN www.schneider-electric.com/buildings September 2019 11 Digital stand-alone and communicating room controllers SE8300 | Low voltage fan coil controller and zone controller Smart energy management has never been easier than with the SE8300 series Fan coil room controllers. Designed for new construction and retrofit projects, the room controllers dramatically decrease project delivery costs by reducing installation, configuration and commissioning time. No complex software or tools are required to customize functionality to meet your applications requirements. The room controllers provide all the advanced features and monitoring functions required by modern building automation systems in a simple compact enclosure. An elegantly simple casing combines with configurable screen colors to match decor. Display your own logo and custom messages on screen to reinforce your brand and provide a more enjoyable occupant experience. Description Dimension Power Voltage Communication Protocol Height: 12cm/4.72in Width: 8.6cm/3.38in Depth: 2.5cm/1in 6.5 - 28 Vdc or 20 - 28 Vac 50/60Hz / 4VA + Output Load (64 VA Max.) BACnet MS/TP, or Modbus RTU ZigBee Pro (with VCM8000V5000P or on-board ZigBee) BACnet/IP and email notification via Wi-Fi (with VCM8002V5031) Product Highlights · Elegant style combinations, designed to complement any decor · Touch screen interface with multi-language support · 2 Pipe or 4 Pipe configuration · ECM fan control · Suitable for both commercial and hospitality markets and systems · Fully programmable control sequences using scripting · On board configuration interface utility · Configurable fan sequence of operation · Configurable Scheduler. · Change of value (COV) function for BMS integration. · Humidity sensor with on-board dehumidification strategy · Optional PIR motion sensor · Advanced occupancy and scheduling functions for commercial and lodging applications · Optional wireless door, window, motion and water leak sensors available. Communication · BACnet MS/TP or Modbus RTU (user selectable) · ZigBee Pro (P) option for direct MPM integration (On-board or plug-in ZigBee Pro wireless module) · BACnet/IP and email notification via Wi-Fi (with VCM8002V5031) Facias This model can be ordered with silver or white Fascia, and can be customized with many different Fascias. Refer to "Fascias" on page 16 for more information (later in this document). Accessories · CO2 sensor module · CO2/temperature/humidity sensor · ZigBee wireless window, door, motion and water leak sensors Part Number Description SE8350U0B00 SE8350U5B00 SE8350U0B11 SE8350U5B11 SE8350U5B00P SE8350U5B11P Low voltage fan coil Controller Low voltage fan coil Controller Low voltage fan coil Controller Low voltage fan coil Controller Low voltage fan coil Controller Low voltage fan coil Controller *Note: ZigBee Pro plug-in module is available BACnet MS/TP X X X X X X RH sensor & control X X X X X X PIR motion sensor ZigBee on-board Fascia & casing No* Silver X No* Silver No* White X No* White X X Silver X X White Schneider Electric | 028-6155-10_Catalog-SE8000-SE7000_EN www.schneider-electric.com/buildings September 2019 12 Digital stand-alone and communicating room controllers SE8600 | Rooftop unit, heat pump and indoor air quality room controller Smart energy management has never been easier than with the SE8600 room controllers for Rooftop units, heat pumps and indoor air quality applications. Designed for new construction and retrofit projects, the room controllers dramatically decrease project delivery costs by reducing installation, configuration and commissioning time. No complex software or tools are required to customize functionality in order to meet your applications requirements. The room controllers provide all the advanced features and monitoring functions required by modern building automation systems in a simple compact enclosure. An elegantly simple casing combines with configurable screen colors to match decor. Display your own logo and custom messages on screen to reinforce your brand and provide a more enjoyable occupant experience. Description Dimension Power Voltage Communication Protocol Height: 12cm/4.72in Width: 8.6cm/3.38in Depth: 2.5cm/1in 28 Vdc or 20 - 28 Vac 50/60Hz / 4VA + Output Load (64 VA Max.) BACnet MS/TP, or Modbus RTU ZigBee Pro (with VCM8000V5000P or on-board ZigBee) BACnet/IP and email notification via Wi-Fi (with VCM8002V5031) Product highlights · Elegant style combinations, designed to complement any decor · Customizable color digital touch screen interface with multi-language support · Configurable as 1H / 1C, 2H / 2C, 3H / 2C and Modulating (Analog) Heat / 2C for Rooftop units · CO2 and fresh air inputs for Indoor Air Quality (IAQ) applications · Suitable for both commercial and hospitality markets and systems · Fully programmable control sequences using scripting · On board configuration interface utility · Configurable sequence of operations · Configurable Economizer · Configurable Scheduler · Change of value (COV) function for BMS integration · Humidity sensor with on-board dehumidification strategy · Optional Passive Infrared (PIR) occupancy sensor · Advanced occupancy functions for commercial and lodging applications · Optional wireless door, window, motion and water leak sensors available. Communication · BACnet MS/TP or Modbus RTU (user selectable) · ZigBee Pro (P) opiton for direct MPM integration (On-board or plug-in ZigBee Pro wireless module) · BACnet/IP and email notification via Wi-Fi (with VCM8002V5031) Facias This model can be ordered with silver or white Fascia, and can be customized with many different Fascias. Refer to "Fascias" on page 16 for more information (later in this document). Accessories · CO2 sensor module · CO2/temperature/humidity sensor · ZigBee wireless window, door, motion and water leak sensors Part Number SE8650U0B00 SE8650U5B00 SE8650U0B11 SE8650U5B11 SE8650U5B00P SE8650U5B11P Description BACnet RH sensor PIR motion MS/TP & control sensor RTU, heat pump & IAQ Controller X X RTU, heat pump & IAQ Controller X X X RTU, heat pump & IAQ Controller X X RTU, heat pump & IAQ Controller X X X RTU, heat pump & IAQ Controller X X X RTU, heat pump & IAQ Controller X X X *Note: ZigBee Pro plug-in module is available ZigBee Pro on-board Fascia & casing No* Silver No* Silver No* White No* White X Silver X White Schneider Electric | 028-6155-10_Catalog-SE8000-SE7000_EN www.schneider-electric.com/buildings September 2019 13 Wireless accessories and specifications BMS wireless integration The wireless versions of the SE8000 room controllers provide a simple yet powerful solution which targets such retrofit installations where running new communication wiring is cost prohibitive. The wireless room controllers can dramatically reduce project installation costs by re-using the existing control wiring already in place between older electronic thermostats and the terminal equipment. No new network wires are required since the controllers rely on a fully integrated ZigBee wireless mesh network infrastructure. Connecting wireless SE8000 room controller devices into an integrated BMS network is made easy with two integration methods, either via a gateway or a wireless serial adapter. EcoStruxure Building Expert Solution Designed for small and medium commercial buildings, EcoStruxureTM Building Expert Solution integrates room controllers using Managers (MPM-GW, MPM-UN, MPM-VA), and provides remote management and supervision of the system through EcoStruxureTM Building Expert, a Web iBMS hosted directly by the MPM. For more information, visit https://www.schneider-electric.com/en/work/campaign/innovation/overview. jsp. Part Number MPM-GW, MPM-UN, MPM-VA Description Managers (MPM) from the EcoStruxure Building Expert Solution line of products Network field wiring eliminated EcoStruxure Building Expert Solution EcoStruxure Building Operation Solution Automation Server or Enterprise Server *The MPM models correspond to room controllers using ZigBee Pro (P) communications only. 028-6155-10_Catalog-SE8000-SE7000_EN www.schneider-electric.com/buildings September 2019 14 Communication and sensors SE8000 room controllers can be adapted to communicate via one of three VCM modules: Wireless ZigBee Pro extended profile, CO2 detection sensor, or Wi-Fi extended profile. This allows the SE8000 room controllers to pair with a variety of wireless sensors and switches for more precise control of HVAC systems in response to occupancy, as well as to communicate wirelessly for integration with BMS and networks. Part Number VCM8000V5045P Description Wireless ZigBee Pro communication card Compatibility SE8000 room controllers Part Number VCM8001V5045 Description CO2 sensor module Part Number VCM8002V5031 Description Wi-Fi module Compatibility SE8000 room controllers Compatibility SE8000 room controllers Part Number SED-CO2-G-5045 SED-TRH-G-5045 Description Wireless CO2 sensor with room temperature and humidity Wireless sensor with room temperature and humidity Compatibility SE8000 room controllers SE8000 room controllers Part Number SED-WMS-P-5045 Description Wireless wall mounted motion sensor Compatibility SE8000 room controllers 028-6155-10_Catalog-SE8000-SE7000_EN www.schneider-electric.com/buildings September 2019 15 Part Number SED-MTH-G-5045 Description Motion/Temperature/Humidity Sensor Compatibility SE8000 room controllers Part Number SED-WDC-G-5045 Description Window/Door Sensor Compatibility SE8000 room controllers Part Number SED-WLS-G-5045 Description Water Leakage Sensor Compatibility SE8000 room controllers 028-6155-10_Catalog-SE8000-SE7000_EN www.schneider-electric.com/buildings September 2019 16 Fascias The Fascias for the SE8600 and SE8300 Series room controllers enable the customization of the exterior appearance of the room controllers to match and blend with any decor. The default Fascia that comes with SE8600 and SE8300 Series room controllers can be replaced with another snap-on Fascia. FAS - 00 Silver FAS - 01 White FAS - 03 Glossy translucent white FAS - 05 Light tan wood FAS - 06 Dark brown wood FAS - 07 Dark black wood FAS - 10 Brushed steel finish FAS - 11 Metallic bronze FAS - 12 High gloss black Part Number FAS-00 FAS-01 FAS-03 FAS-05 FAS-06 FAS-07 FAS-10 FAS-11 FAS-12 Description Silver White Glossy translucent white Light tan wood Dark brown wood Dark black wood Brushed steel finish Metallic bronze High gloss black Some Fascias may not be available in all markets. Verify Fascia availability in your area. 028-6155-10_Catalog-SE8000-SE7000_EN www.schneider-electric.com/buildings September 2019 SE7000 Series Room Controllers 18 Digital stand-alone and communicating room controllers The SE7000 series offers a variety of application-specific products to increase the comfort of building occupants while reducing energy costs and consumption and accelerating return on investment. These digital controllers give users easy-to-install, thermostat-like functionality that can sense occupancy and adjust set-point or fan speed control. The SE7000 room controllers can be easily integrated into most Building Management Systems (BMS). SE7200 Series > Zoning, heating/cooling · Reheat control · Induction units · Chilled beam · Under floor heating · Perimeter radiant heat · Pressure dependent VAV SE7300 and SER7300 Series > Fan coil, three-speed fan · Low-voltage, line-voltage and mixed-voltage fan coil unit control · Multiple fan speed, heating and cooling stages configurations · Humidity control options · Relay pack accessories for line-voltage and mixed-voltage applications Zone control · Fin-tube radiators · Cabinet heaters · Radiant panel heaters · Electric re-heat zones · Terminal reheat SE7600 Series > Rooftop or heat pump · Economizer option · Humidification/dehumidification heat pumps · Rooftop, 3 heat/2 cool · Water source with dehumidification, 1 heat/2 cool 028-6155-10_Catalog-SE8000-SE7000_EN www.schneider-electric.com/buildings September 2019 19 Digital stand-alone and communicating room controllers SE7200 | Communicating and network-ready Variable Air Volume, Pressure Dependent (VAV-PD) zone controllers Smart energy management has never been easier than with the SE7200 series. Designed for new construction or retrofit projects, the controllers dramatically decrease total costs by reducing installation time, configuration and commissioning time. The SE7200 series provides the advanced features and monitoring functions required by modern building automation systems without the use of software and commissioning tools. This application is known as Variable Air Volume - Pressure Dependent (VAV-PD). Part Number Description Output SE7200C5045 Zone Controller Net Ready Floating Output - VAV PD SE7200C5045B Zone Controller BACnet Floating Output - VAV PD SE7200F5045 Zone Controller Net Ready Analog Output - VAV PD SE7200F5045B Zone Controller BACnet Analog Output - VAV PD Floating or on/off Floating or on/off 0 - 10 Vdc 0 - 10 Vdc PIR Cover Communication No Stand-alone (network ready) No BACnet No Stand-alone (network ready) No BACnet Schneider Electric | 028-6155-10_Catalog-SE8000-SE7000_EN www.schneider-electric.com/buildings September 2019 20 SE7300 | Low voltage communicating and network-ready fan coil controllers The SE7300 series provides the advanced features and monitoring functions required by modern building automation systems without the use of software and commissioning tools. The SE7300 is a low voltage fan coil terminal equipment controller suitable for commercial and hospitality markets. It can also be used as a zone controller or mixed voltage solution. Commercial interface (local override) Part Number Description Humidity Output PIR Cover Communication SE7350C5045 SE7350C5045B SE7350F5045 SE7350F5045B Fan Coil Unit Control with Humidification Yes Control Net Ready Floating Output Communication Module Fan Coil Unit Control with Humidification Yes Control BACnet Floating Output Communication Module Fan Coil Unit Control with Humidification Yes Control Net Ready Analog Output Communication Module Fan Coil Unit Control with Humidification Yes Control BACnet Analog Output Communication Module Floating or on/off No Floating or on/off No 0 - 10 Vdc No 0 - 10 Vdc No Stand-alone (network ready) BACnet Stand-alone (network ready) BACnet Hotel/lodging interface (°C/°F selection) Part Number Description Humidity Output SE7355C5045 Fan Coil Unit Control with Humidification Yes Control Net Ready Floating Output Hotel SE7355C5045B Fan Coil Unit Control with Humidification Yes Control BACnet Floating Output Hotel SE7355F5045 Fan Coil Unit Control with Humidification Yes Control Net Ready Analog Output Hotel SE7355F5045B Fan Coil Unit Control with Humidification Yes Control BACnet Analog Output Hotel Floating or on/off Floating or on/off 0 - 10 Vdc 0 - 10 Vdc PIR Cover Communication No Stand-alone (network ready) No BACnet No Stand-alone (network ready) No BACnet SE7300-ECM | ECM fan coil controllers More and more engineers are commonly specifying fan coil units that function with electronically commutated motors, which offer better energy efficiency and reduced operating costs. The SE7300 ECM fan coil Controller allows you to capitalise on this additional energy savings by optimising fan control sequences of electronically commutated motors. The Controller is optimised to offer full proportional operation versus the traditional three-speed tap operation. This wall-mounted Controller features an easy-to-read digital display and built-in commissioning and configuration utility, temperature sensor and optional humidity and passive infrared occupancy sensor (PIR) cover. Commercial interface (local override) Part Number SE7300F5045B-ECM Description ECM Fan Coil Unit Control BACnet Analog Output Communication Module PIR Cover No Communication BACnet Hotel/lodging interface (°C/°F selection) Part Number SE7305F5045B-ECM Description ECM Fan Coil Unit Control BACnet Analog Output Hotel PIR Cover No Communication BACnet 028-6155-10_Catalog-SE8000-SE7000_EN www.schneider-electric.com/buildings September 2019 21 SER7300 | Line-voltage fan coil terminal equipment controller with relay packs The SER7300 fan coil unit solution requires installation of only two components, the SER7300 terminal equipment controller and the VC3000 relay pack (refer to "Relay Packs" on page 38 for more information). This allows reuse of existing line-voltage wiring between the fan coil unit and temperature controller, thereby reducing overall costs, labor, and installation time for both retrofit and new construction control projects. Commercial interface (local override) Part Number SER7350A5045 SER7350A5045B Description Humidity PIR Cover Communication Fan Coil Unit Control with Humidification Control Net Yes No Ready Communication Module Fan Coil Unit Control with Humidification Control BACnet Yes No Communication Module Stand-alone (network ready) BACnet Hotel/lodging interface (°C/°F selection) Part Number SER7355A5045 SER7355A5045B Description Humidity PIR Cover Communication Fan Coil Unit Control with Humidification Control Net Yes No Ready Hotel Fan Coil Unit Control with Humidification Control BACnet Yes No Hotel Stand-alone (network ready) BACnet 028-6155-10_Catalog-SE8000-SE7000_EN www.schneider-electric.com/buildings September 2019 22 Check in to comfort. Check out the savings. Hotel guest comfort meets energy savings with our Series room controllers 028-6155-10_Catalog-SE8000-SE7000_EN www.schneider-electric.com/buildings September 2019 23 Digital stand-alone and communicating room controllers SE7600 | Communicating and network-ready Rooftop controllers Primarily designed for use in small to mid-sized commercial building applications, SE7600 Series room controllers can be installed in any building using a standard Rooftop or heat pump unit with a requirement for advanced fresh air control. Capable of controlling economiser-free cooling and demand-based ventilation strategies, the SE7600 Series provides fresh air measurement input right out of the box. Part Number Description SE7652B5045 SE7652B5045B SE7656B5045 SE7656B5045B SE7657B5045 SE7657B5045B Rooftop Local Scheduling / Programmable Controller 2x Heat / 2x Cool Net Ready Rooftop Local Scheduling / Programmable Controller 2x Heat / 2x Cool BACnet Rooftop Local Scheduling / Programmable Controller + ECO Net Ready Rooftop Local Scheduling / Programmable Controller + ECO BACnet Rooftop Local Scheduling / Programmable Controller Net Ready + Humidification / Dehumidification Control Rooftop Local Scheduling / Programmable Controller BACnet + Humidification / Dehumidification Control Scheduling Economizer Heat/Cool Stages Humidity PIR Cover Communication Yes No 2H/2C No No Stand-alone (network ready) Yes No 2H/2C No No BACnet Yes Yes Yes Yes 2H/2C 2H/2C No No No No Stand-alone (network ready) BACnet Yes No 2H/2C Yes No Stand-alone (network ready) Yes No 2H/2C Yes No BACnet Schneider Electric | 028-6155-10_Catalog-SE8000-SE7000_EN www.schneider-electric.com/buildings September 2019 24 Schneider Electric Room Controllers provide comfort and energy savings using their native application-specific control sequences, PID algorithms, occupancy detection and schedule management. Building Efficient control 028-6155-10_Catalog-SE8000-SE7000_EN www.schneider-electric.com/buildings Green energy September 2019 25 Digital stand-alone and communicating room controllers SE7656E | Communicating and network-ready Indoor air quality controllers Indoor air quality is increasingly becoming a major concern to businesses, building managers, tenants, and employees because of its direct impact on the comfort, well-being, and productivity of the building's occupants. The SE7656E indoor air quality Controller, along with a CO2 sensor, is a cost-effective solution capable of controlling economiser-free cooling and demand-based ventilation strategies, while providing a fresh air measurement input. When connected to a building automation system, the Controller can monitor and verify the CO2 and fresh air levels, ensuring optimal air quality and energy efficiency. Part Number Description Scheduling SE7656E5045 Indoor Air Quality Local Scheduling / Yes Programmable Controller 2x Heat / 2x Cool + ECO Net Ready SE7656E5045B Indoor Air Quality Local Scheduling / Yes Programmable Controller 2x Heat / 2x Cool + ECO BACnet Heat/Cool Stages PIR Cover Communication 2H/2C No Stand-alone (network ready) 2H/2C No BACnet SE7652F | Communicating and network-ready Rooftop controllers for modulating heat The new SE7652F Rooftop terminal equipment Controller with modulating heat can make your building more comfortable while still meeting the ventilation codes for minimum building fresh air requirements. The easy-to-install SE7652F includes modulating heat functionality, which allows the addition of an extra supply air temperature control loop to better control and condition the supply air levels for a more comfortable occupant environment. Part Number Description Scheduling SE7652F5045 SE7652F5045B Modulating Heat Application Local Scheduling Yes / Programmable Controller 1x Heat / 2x Cool Net Ready Modulating Heat Application Local Scheduling Yes / Programmable Controller 1x Heat / 2x Cool BACnet Heat/Cool Stages PIR Cover Communication 1H (analogue)/2C No Stand-alone (network ready) 1H (analogue)/2C No BACnet SE7652H | Communicating and network-ready Heat pump controllers Primarily designed for use in small to mid-sized commercial building applications, SE7600 Series room controllers can be installed in any building using a standard heat pump unit with a requirement for advanced fresh air control. Capable of controlling economiser-free cooling and demand-based ventilation strategies, the SE7600 Series provides fresh air measurement input right out of the box. Part Number Description SE7652H5045 SE7652H5045B Heat Pump Local Scheduling / Programmable Controller 3x Heat / 2x Cool Net Ready Heat Pump Local Scheduling / Programmable Controller 3x Heat / 2x Cool BACnet Scheduling Heat/Cool Stages PIR Cover Yes 3H/2C No Yes 3H/2C No Communication Stand-alone (network ready) BACnet Schneider Electric | 028-6155-10_Catalog-SE8000-SE7000_EN www.schneider-electric.com/buildings September 2019 26 SE7652W | Water source heat pump controllers The new SE7652W water source heat pump Controller (with dedicated dehumidification sequences) provides exceptional control of water source heat pumps for commercial buildings. Common indoor air quality issues such as mold, mildew, condensation, poor occupant comfort, and overall building health can be effectively resolved in an energy-efficient manner. Simple to install and commission, this wall-mounted device monitors water temperature, as well as other points, offering added value without the additional costs related to more complex systems. Part Number Description Scheduling SE7652W5045 Water Source Heat Pump Local Yes Scheduling / Programmable Control- ler 3x Heat / 2x Cool Net Ready SE7652W5045B Water Source Heat Pump Local Yes Scheduling / Programmable Control- ler 3x Heat / 2x Cool BACnet Heat/Cool Stages PIR Cover Communication 3H/2C No Stand-alone (network ready) 3H/2C No BACnet 028-6155-10_Catalog-SE8000-SE7000_EN www.schneider-electric.com/buildings September 2019 27 Digital stand-alone and communicating room controllers SEZ7000 | Commercial zoning systems Variable Volume and Temperature (VVT) The SEZ commercial zoning system has been specifically designed to bring a simple scalable solution to mid-market commercial applications without the cost associated with a typical DDC zoning system. Models include Rooftop and heat pump units controlling analogue heat, CO2 levels, and indoor air quality. Zoning controllers that provide floating and analogue damper control are also available. A single central Controller unit can support up to 32 individual zone controllers. All zoning system controllers can be fitted with an on-board passive infrared (PIR) occupancy sensor cover that allows for advanced occupancy strategies, enabling greater energy savings to zones during scheduled events when no occupants are present. Commercial zoning system - Zone controllers Part Number Description Output PIR Cover Communication SEZ7260C5045B Zone System Control BACnet 2x Floating - Variable Volume & Temperature (VVT) Zone Floating or on/off No SEZ7260C5045W Zone System Control ZigBee Wireless 2x Floating - Vari- Floating or on/off No able Volume & Temperature (VVT) Zone SEZ7260F5045B Zone System Control BACnet 2x Analog - Variable 0 - 10 Vdc No Volume & Temperature (VVT) Zone SEZ7260F5045W Zone System Control ZigBee Wireless 2x Analog - Vari- 0 - 10 Vdc No able Volume & Temperature (VVT) Zone BACnet Wireless BACnet Wireless Commercial zoning system - Rooftop master controllers Part Number Description Heat/Cool Stages IAQ Econom. Mod. Heat Comm. SEZ7656E1045B Zone System Control BACnet 2x Heat / 2x Cool 2H/2C Yes Yes No Indoor Air Quality - Variable Volume & Temperature (VVT) Master SEZ7656E1045W Zone System Control ZigBee Wireless 2x Heat 2H/2C Yes Yes No / 2x Cool Indoor Air Quality - Variable Volume & Temperature (VVT) Master SEZ7656F1045B Zone System Control BACnet 1Heat / 2Cool 1H/2C No No Yes Modulating Heat Application - Variable Volume & Temperature (VVT) Master SEZ7656F1045W Zone System Control ZigBee Wireless 1x Heat / 2x 1H/2C No No Yes Cool Modulating Heat Application - Variable Volume & Temperature (VVT) Master SEZ7656R1045B Zone System Control BACnet 2x Heat / 2x Cool 2H/2C No No No Rooftop - Variable Volume & Temperature (VVT) Master SEZ7656R1045W Zone System Control ZigBee Wireless 2x Heat / 2H/2C No No No 2x Cool Rooftop - Variable Volume & Temperature (VVT) Master BACnet Wireless BACnet Wireless BACnet Wireless Commercial zoning system - Heat pump controllers Part Number SEZ7656H1045B SEZ7656H1045W Description Communication Zone System Control BACnet Heat Pump - Variable Volume & Temperature (VVT) Master Zone System Control ZigBee Wireless Heat Pump Variable Volume & Temperature (VVT) Master BACnet Wireless Schneider Electric | 028-6155-10_Catalog-SE8000-SE7000_EN www.schneider-electric.com/buildings September 2019 28 Digital stand-alone and communicating room controllers VH7200 | Humidistats Schneider Electric humidistats offer exceptional control of both humidification and dehumidification equipment found in typical commercial buildings. Models with advanced built-in functions such as a modulating high limit and outdoor temperature humidity setpoint reset are also available. All models are available in BACnet® MS/TP or stand-alone "Network Ready" versions. All models contain a binary input, which can be set by the user to monitor an electrode humidifier canister service status or may be used as a general purpose service indicator. The VH7200 humidity controller family is specifically designed for control of humidification and dehumidification equipment such as steam header direct injection, desiccant wheel, or stand-alone humidification / dehumidification equipment. The product features a complete embedded humidity control solution with an intuitive backlit LCD display that walks the installer through the configuration steps, making the process extremely simple. Accurate relative humidity control is achieved due to the product's unique PI time proportional control algorithm, which virtually eliminates humidity offset associated with traditional, differential-based humidity controllers. Part Number VH7200A1000 VH7270F1000 VH7270K1000 Application Model with Outdoor Reset only Model with Outdoor Reset & Proportional High Limit Model with Outdoor Reset & Proportional High Limit Humidification Output Dehumidifica Output On/Off 24 Vac On-Off 24 Vac 0-10 Vdc 0-10 Vdc & On/Off 24 Vac On-Off 24 Vac On-Off 24 Vac Schneider Electric | 028-6155-10_Catalog-SE8000-SE7000_EN www.schneider-electric.com/buildings September 2019 29 Wireless accessories and specifications BMS wireless integration The wireless versions of the SE7000 provide a simple yet powerful solution which targets such retrofit installations where running new communication wiring is cost prohibitive. The wireless room controllers can dramatically reduce project installation costs by re-using the existing control wiring already in place between older electronic thermostats and the terminal equipment. No new network wires are required since the controllers rely on a fully integrated ZigBee wireless mesh network infrastructure. Connecting wireless SE7000 series devices into an iBMS network is made easy with two integration methods, either via a gateway. EcoStruxure Building Expert Solution Designed for small and medium commercial buildings, EcoStruxureTM Building Expert Solution integrates room controllers using Managers (MPM-GW, MPM-UN, MPM-VA), and provides remote management and supervision of the system through EcoStruxureTM Building Expert, a Web iBMS hosted directly by the MPM. For more information, visit https://www.schneider-electric.com/en/work/campaign/innovation/overview. jsp. Part Number MPM-GW, MPM-UN, MPM-VA Description Managers (MPM) from the EcoStruxure Building Expert Solution line of products Network field wiring eliminated EcoStruxure Building Expert Solution EcoStruxure Building Operation Solution Automation Server or Enterprise Server *The MPM models correspond to room controllers using ZigBee Pro (P) communications only. 028-6155-10_Catalog-SE8000-SE7000_EN www.schneider-electric.com/buildings September 2019 30 From wired to wireless systems, remote sensors to communication boards and covers, SE7000 Series room controllers can be tailored for any application-specific needs. Covers SE7000 Series room controllers are compatible with passive infrared cover accessories. room controllers equipped with a passive infrared cover provide advanced active occupancy logic, which will automatically switch occupancy levels from `occupied' to `stand-by' and `unoccupied' as appropriate. This built-in intelligence provides energy savings during occupied hours without sacrificing occupant comfort. Part Number COV-BC-5031 COV-FCU-C-5031 COV-FCU-L-5031 COV-PIR-FCU-C-5031 COV-PIR-FCU-L-5031 COV-RTUHP-5031 COV-PIR-RTUHP-5031 COV-ZN-5031 COV-PIR-ZN-5031 Description Kit cover blind Cover for commercial room controllers Cover for hotel room controllers PIR cover for commercial room controllers PIR cover for hotel room controllers Cover for room controllers PIR cover for room controllers Cover for room controllers PIR cover for room controllers Compatibility SE7000 models SE7300 models SE7300 models SE7300 models SE7300 models SE7600 models SE7600 models SE7200 models SE7200 models Communication adapters SE7000 Series room controllers are network ready, designed to accept the addition of communication. With a network card available for field upgrade, your system can be networked to an integrated building management system for the most advanced control and functionality. In the Part Number, please note that: · W: Legacy ZigBee for replacement. · P: ZigBee Pro, compatible with all room controllers. Part Number Description Compatibility VCM7000V5000W VCM7000V5000P VCM7260Z5000B VCM7260Z5000W VCM7300T5000B VCM7300T5000E VCM7300V5000B VCM7300V5000E VCM7600W5000B VCM7600W5000W VCM7600V5000B VCM7600V5000E VCM7607V5000B VCM7607V5000E VCM7656Z5000B VCM7656Z5000W VWG-APP-1031 Wireless Communication Card - 7000 - ZigBee Pro extended profile retrofit communication module Wireless Communication Card - 7000 - ZigBee proprietary wireless retrofit communication module BACnet replacement communication module 7000 Series Room Controllers (72, 73, R73, and 76) 7000 Series Room Controllers (72, 73, R73, 76xx(B,H) and 76x7(B)) 7260(C,F) ZigBee replacement communication module 7260(C,F) Communication Module BACnet 73 with Relay Module - BACnet retrofit communication module R73xx(A) Communication Module LON 73 with Relay Module - Echelon retrofit communication module R73xx(A) BACnet Communication Card - 7200/7300 - BACnet retrofit communication module 7200(C,F) and 73xx(C,F) LON Communication Card - 7200/7300 - Echelon retrofit communication module 7200(C,F) and 73xx(C,F) BACnet retrofit communication module 76xx(W,E,F) ZigBee proprietary wireless retrofit communication module 76xx(W,E,F) BACnet Communication Card - BACnet retrofit communication module LON Communication Card - Echelon retrofit communication module BACnet Communication Card - 76X7 -BACnet retrofit communication module LON Communication Card - Echelon retrofit communication module BACnet replacement communication module 76xx(B,H) 76xx(B,H) 76x7(B) 76x7(B) Z7656(E,F,R,H) ZigBee replacement communication module Z7656(E,F,R,H) Wireless Communication Card JACE 200/600/700 The VCM7607V5045E (terminal equipment Controller Echelon LonTalk communication adapter) is not available for: SE7652W, SE7652F Controller models. 028-6155-10_Catalog-SE8000-SE7000_EN www.schneider-electric.com/buildings September 2019 31 Remote sensors Our discreet line of wall mount room sensors is used for advanced room temperature sensing. Each model is equipped with three thermistors and two dip switches for various averaging combinations, with a temporary override key and an occupancy LED available in the advanced model. Duct-Mounted Temperature Sensors Part Number S1010D1000 Description Duct-mounted changeover sensor 10K - Change Over Duct Sensing - Mounting: Through hole in duct, with eyelet S1010E1000 Capsule type temperature sensor - Remote sensing easy to dissimulate for indoor and outdoor use - Water temperature sensing strapped on pipe or in an immersion well Duct & Outside Air Sensors Part Number S2000D1000 S2020E1000 Description Duct supply air sensor with junction box - Remote return air temperature sensing with the sensor mounted on the return air duct. - Outside air temperature sensing with the sensor installed in the fresh air plenum. - Supply air temperature sensor Outdoor air supply sensor - Outside air temperature sensing with the sensor installed directly exposed to the elements. - Sensor uses a water resistant NEMA 4 PVC enclosure for outdoor applications Part Number S3010W1031 S3020W1031 Part Number 022-0003 022-0114 Description Room sensor - Remote room sensing - 3 thermistors with 2 dip switches are provided with each sensor for various averaging combinations Room sensor with temporary override key and occupancy LED - Remote room sensing with override key and occupancy LED - 3 thermistors with 2 dip switches are provided with each sensor for various averaging combinations Description Sensor Plenum 4K7 Sensor changeover 47K 028-6155-10_Catalog-SE8000-SE7000_EN www.schneider-electric.com/buildings September 2019 32 Electronic heat control Schneider Electric turns up the heat when is comes to electric heat controls. Choose between solid state relays, solid state relays with integrated heat sink, SCR power controls with various choice of analog input signals, electronic relays for electric baseboard heaters and Vernier low voltage step controllers. R810 The R810 power switches have been designed for safe and reliable control of electric heat loads. This broad line of value priced products is used by most major North American duct heater manufacturers. The appropriate PWM or pulsed input signal can be provided by a DDC panel or a VT7225 thermostat. Part Number R810-621-REV2 R810-623-REV2 R810-641-REV2 R810-643-REV2 R810-671-REV2 Voltage 600 Volts 600 Volts 600 Volts 600 Volts 600 Volts Phase 1 3 1 3 1 Current 25 Amp 25 Amp 45 Amp 45 Amp 75 Amp Heatsink Length Weight (lbs) 3.0 " (76mm) 6.5 " (165mm) 6.5 " (165mm) 10.0 " (254mm) 10.0 " (254mm) 1.80 2.65 2.40 3.70 3.50 R820 The R820 series SCR power controls are designed for cost effective, precise modulation of electric loads for most electric heating applications. (Applicable on resistive loads only) The R820 series consists of SCR's power controls, c/w factory assembled heatsink for surface or in-panel mounting. Part Number R820-621-REV2 R820-623-REV2 R820-641-REV2 R820-643-REV2 R820-671-REV2 R820-PCB-A01 Voltage Phase 24 - 600 Volts 24 - 600 Volts 24 - 600 Volts 24 - 600 Volts 24 - 600 Volts 24 Vac Electronic PCB 1 3 1 3 1 1 or 3 Current 25 Amp 25 Amp 45 Amp 45 Amp 75 Amp - - - R850V The R850V series step controller is designed for cost effective, precise modulation of multi-stage control application. A common application is a multi step electric duct heater. An integrated vernier control output will give a precise and full modulation of the load from 0 to 100% of the total capacity. Part Number R850V-8 Description 8-stage unit If more than 8 stage are required, the R850V-8 can be used as a master unit with another R850V as a slave unit. Adding another unit can bring the total step number up to 16. 028-6155-10_Catalog-SE8000-SE7000_EN www.schneider-electric.com/buildings September 2019 33 R851B The R851B series step controller is designed for cost effective, precise modulation of multi-stage control application. A common application is a multi step electric boiler. An integrated vernier control output will give a precise and full modulation of the load from 0 to 100% of the total capacity. Part Number R851B-8 Description 8-stage unit If more than 8 stages are required, the R851B-8 can be used as a master unit with another R851B as a slave unit. Adding another unit can bring the total step number up to 16. R851V The R851V series step controller is designed for cost effective, precise modulation of multi-stage control application. A common application is a multi step electric duct heater. An integrated vernier control output will give a precise and full modulation of the load from 0 to 100% of the total capacity. Part Number R851V-8 Description 8-stage unit If more than 8 stages are required, the R851V-8 can be used as a master unit with another R851V as a slave unit. Adding another unit can bring the total step number up to 16. VT7225 | Modulating electric heat controllers The VT7225 series controllers are microcomputer-based, proportional and integral (PI) devices with one analog 0 to 10 Vdc output, one 8 Vdc and one 24 Vac proportioning pulsed output. The analog 0 to 10 Vdc modulating output can control the room or supply temperature by modulating directly a 0 to 10 Vdc SCR power controller. The Vdc and Vac pulsed outputs can control the room or supply temperature by modulating directly 4-32 Vdc triggered solid state relays (SSR's) using a time proportioning control algorithm on a 1 second time cycle. Part Number VT7225 Description Room Controller Heater Analog and PWM Output. Replaces: C1025C-1000, C1025F-1000 & T920. Output PIR Cover 0-10 Vdc or PWM No Communication Stand-alone (network ready) 028-6155-10_Catalog-SE8000-SE7000_EN www.schneider-electric.com/buildings September 2019 34 Specifications SE7200 and VT7225 SE7300 SE7600 Agency approval Weight Dimensions (H x W x D) Non-PIR model PIR model Power supply Outputs Analog Triac Operating conditions Temperature sensor type Temperature sensor accuracy Humidity sensor type* Humidity sensor read range* Humidity sensor accuracy* Dehumidification setpoint range* Economizer accuracy* * Available with selected models. CE, C-Tick, UL 0.34 kg (0.75 lb) 125 mm x 87 mm x 30 mm (4.92" x 3.41" x 1.16") 125 mm x 87 mm x 38 mm (4.92" x 3.41" x 1.47") 10 - 30 Vac (50/60 Hz) 0 - 10 Vdc 30 Vac, 1 amp 0 - 50 °C (32 - 122 °F) 0 - 95% RH (Non-condensing) 10K Type 2 ± 0.5 °C (± 0.9 °F) @ 21 °C (70 °F) N/A N/A N/A N/A N/A CE, C-Tick, UL 0.34 kg (0.75 lb) CE, C-Tick, UL 0.34 kg (0.75 lb) 125 mm x 87 mm x 30 mm (4.92" x 3.41" x 1.16") 125 mm x 87 mm x 38 mm (4.92" x 3.41" x 1.47") 10 - 30 Vac (50/60 Hz) 125 mm x 87 mm x 30 mm (4.92" x 3.41" x 1.16") 125 mm x 87 mm x 38 mm (4.92" x 3.41" x 1.47") 10 - 30 Vac (50/60 Hz) 0 - 10 Vdc 30 Vac, 1 amp 0 - 50 °C (32 - 122 °F) 0 - 95% RH (Non-condensing) 10K Type 2 ± 0.5 °C (± 0.9 °F) @ 21 °C (70 °F) Single point calibrated bulk polymer type sensor 10 - 90% RH (Non-condensing) ± 5% @ 20 - 80% RH (Non-condensing) 30 to 95% RH N/A 0 - 10 Vdc 30 Vac, 1 amp 0 - 50 °C (32 - 122 °F) 0 - 95% RH (Non-condensing) 10K Type 2 ± 0.5 °C (± 0.9 °F) @ 21 °C (70 °F) Single point calibrated bulk polymer type sensor 10 - 90% RH (Non-condensing) ± 5% @ 20 - 80% RH (Non-condensing) 30 to 95% RH ± 3% typical 028-6155-10_Catalog-SE8000-SE7000_EN www.schneider-electric.com/buildings September 2019 Remote sensor specifications All sensors Sensor type Maximum wire length Room Sensors 10 K ohm NTC thermistor 1,525m (5000ft) for 24 GA wire and up Operating conditions Storage conditions Dimensions Approximate shipping weight Enclosure material 0 °C to 50 °C (32 °F to 122 °F) 0% to 95% RH non-condensing -30 °C to 50 °C (-22 °F to 122 °F) 0% to 95% RH non-condensing 125 mm x 86 mm x 29 mm (4.94" x 3.38" x 1.13") 155 grams (0.34 lbs) ABS - FRI [WT1337V] UV stabilised Duc Sensor Operating conditions Sensing bulb type Wire length Probe length and diameter Up to 85 °C (185 °F) 0% to 95% RH non-condensing Plastic heatshrink 305mm (12") 114mm (4-1/2") and 6mm (1/4") Duct Sensor Operating conditions Storage conditions Approximate shipping weight Probe tip plastic type -40 °C to 50 °C (-40 °F to 122 °F) 0% to 95% RH non-condensing -40 °C to 70 °C (-40 °F to 122 °F) 0% to 95% RH non-condensing 300 grams (0.7 lbs) Fire retarding grade "HB" ABS Outdoor Sensor Operating conditions Storage conditions Approximate shipping weight Enclosure plastic type -40 °C to 50 °C (-40 °F to 122 °F) 0% to 100% RH non-condensing -40 °C to 50 °C (-40 °F to 122 °F) 0% to 100% RH non-condensing 500 grams (1.1 lbs) NEMA 4 PVC 028-6155-10_Catalog-SE8000-SE7000_EN www.schneider-electric.com/buildings 35 September 2019 36 Electronic heat control R810 Power Switching Modules Operating conditions Power supply 0 °C to 80 °C (32 °F to 176 °F) 0% to 95% RH non-condensing 4-32 Vdc time proportioning signal into 2K resistance R820 Power Controls Operating conditions Thermostatic protection Power supply 0 °C to 80 °C (32 °F to 176 °F) 0% to 95% RH non-condensing Self-resetting. Auto shut off when SCR ambient temp. is above 82°C (180°F) 24 Vac -15%, +10% 50/60 Hz; 2 VA Use a Class 1 (properly fused) or Class 2, CSA or UL recognized transformer R850 Step Controller Operating conditions Relay outputs Vernier stage Input impedance Power supply 0 °C to 80 °C (32 °F to 176 °F) 0% to 95% RH non-condensing Isolated relay 30 Vac @ 1.0 amps. max. per output, up to a maximum of 4.0 amps. total per R850 controller. Vdc pulsed: 6 Vdc, 30 mA max. 0 to 10 Vdc 5 mA max. 0 to 10 Vdc into 10 K minimum 24 Vac -15%, +10% 50/60 Hz; 4 VA Use a Class 1 ( properly fused ) or Class 2, CSA or UL recognized transformer for power supply & relay outputs. R851B Step Controller Operating conditions Relay outputs Vernier stage Input impedance Power supply UL recognized 0 °C to 80 °C (32 °F to 176 °F) 0% to 95% RH non-condensing Pilot duty: - 24 - 120 Vac 720 VA - 240 Vac 690 VA Motor load: - 120 Vac 1 HP - 240 Vac 2 HP 0 to 10 Vdc, 5 mA max. 0 to 10 Vdc into 10 K minimum 24 Vac -15%, +10% 50/60 Hz; up to 18 VA Use a Class 1 ( properly fused ) or Class 2, CSA or UL recognized transformer for power supply & relay outputs. File # E212649 028-6155-10_Catalog-SE8000-SE7000_EN www.schneider-electric.com/buildings September 2019 37 R851V Step Controller Operating conditions Relay outputs Vernier stage Input impedance Power supply UL recognized 0 °C to 80 °C (32 °F to 176 °F) 0% to 95% RH non-condensing Pilot duty: - 24 - 120 Vac 720 VA - 240 Vac 690 VA Motor load: - 120 Vac 1 HP - 240 Vac 2 HP 0 to 10 Vdc 5 mA max. Vdc pulsed, 6 Vdc, 30 mA max 0 to 10 Vdc into 10 K minimum 24 Vac -15%, +10% 50/60 Hz; up to 18 VA Use a Class 1 ( properly fused ) or Class 2, CSA or UL recognized transformer for power supply & relay outputs. File # E212649 Humidistats VH7200 Humidistats Humidistat power requirements Operating conditions Storage conditions Resolution Control accuracy Humidification setpoint range Dehumidification setpoint range Outdoor air temperature range Binary inputs Contact output rating Analog output rating Wire gauge Dimensions Approximate shipping weight 19-30 Vac 50 or 60 Hz; 2 VA ( RC & C ) Class 2 0 °C to 50 °C ( 32 °F to 122 °F ) 0% to 95% R.H. non-condensing -30 °C to 50 °C ( -22 °F to 122 °F ) 0% to 95% R.H. non-condensing Temperature: ± 0.1 °C (± 0.2 °F) Humidity: ± 0.1% Humidity: ± 5% RH from 20 to 100% RH at 50 to 90°F (10 to 32°C) 10% RH to 90% RH 15% RH to 95% RH -40 °C to 50 °C ( -40 °F to 122 °F ) Relay dry contact only across "Scom" and "DI1" terminals Each relay output: 30 Vac, 1 Amp. Max. / 30 Vac, 3 Amp. in-rush 0 t0 10 Vdc into 2K resistance minimum 18 gauge maximum, 22 gauge recommended 4.94" x 3.38" x 1.13" 0.75 lb ( 0.34 kg ) 028-6155-10_Catalog-SE8000-SE7000_EN www.schneider-electric.com/buildings September 2019 Relay Packs 39 VC3000 | Relay Pack A compact and easy to install Relay Pack for line-voltage fan coil units to be used in combination with room controllers. The VC3000 is a Relay Pack for line-voltage fan coil units. The device is used with SER7300 and SER8300 room controllers as a two component retrofit option. Features The VC3000 Relay Pack features an on-board universal voltage power supply and line-voltage relays which directly drive fractional horsepower fan motors and valves. This eliminates the need to install and wire costly pilot relays and transformers. No previous building automation training is required for the installation and commissioning process. Existing line voltage wiring between the fan coil unit and temperature Controller can be reused further minimizing overall labor and installation costs. Description Dimension Power Voltage Part Number VC3300E5000 VC3400E5000 VC3404E5000 VC3500E5000 VC3504E5000 Details Height: 12cm/4.72in / Width: 8.6cm/3.38in / Depth: 2.5cm/1in 7.0 Vdc +/- 10% 2.4 watts minimum Fan Coil Unit Relay Pack 3 slave fan outputs Transformer Relay Pack 4 relay outputs 1 smart Vdc output 4 inputs Fan Coil Unit Relay Pack 4 relay outputs 1 smart Vdc output 4 inputs Transformer Relay Pack 5 relay outputs 4 inputs Fan Coil Unit Relay Pack 5 relay fan outputs 4 outputs 028-6155-10_Catalog-SE8000-SE7000_EN www.schneider-electric.com/buildings September 2019 40 Relay Packs VC1300 | Mixed Voltage fan-coil package A compact and easy to install Relay Pack for fan control for Mixed Voltages with 24Vac transformer units to be used in combination with SE7300 and SE8300 room controllers as a two component Mixed Voltage solution. Mixed Voltage Application In combination with the SE7300/SE8300 Series room controllers, the VC1300 allows control of a fan-coil requiring Mixed Voltage for the following: · Line voltage for the 3-speed fan control (120Vac unit) · Low voltage for valve control · LED indication of relay status Description Dimension Power Voltage Contacts ratings 24Vac low voltage power output Outputs Number of outputs Height: 5cm/2in / Width: 14cm/5.5in / Depth: 17cm/6.7in 110-130 Vac / 24 Vac Resistive: 7 Amp / 1680 W ; Motor and or compressor: ¼ Hp / 10 LRA / 2.5 FLA approved for 30,000 operations at 240 Vac 0.5A, 12 VA max 3 on/off outputs Part Number VC1300E5000 Description Fan coil relay board 110/130v for Mixed Voltages with 24Vac Transformer VC2300 | Mixed Voltage fan-coil package A compact and easy to install Relay Pack for fan control for Mixed Voltages with 24Vac transformer units to be used in combination with SE7300 and SE8300 room controllers as a two component Mixed Voltage solution. Mixed Voltage Application In combination with the SE7300/SE8300 Series room controllers, the VC2300 allows control of a fan-coil requiring Mixed Voltage for the following: · Line voltage for the 3-speed fan control (220/240Vac unit) · Low voltage for valve control · LED indication of relay status Description Dimension Power Voltage Contacts ratings 24Vac low voltage power output Outputs Number of outputs Height: 5cm/2in / Width: 14cm/5.5in / Depth: 17cm/6.7in 220-240 Vac / 24 Vac Resistive: 7 Amp / 1680 W ; Motor and or compressor: ¼ Hp / 10 LRA / 2.5 FLA approved for 30,000 operations at 240 Vac 0.5A, 12 VA max 3 on/off outputs Part Number VC2300E5000 Description Fan coil relay board 220/240v for Mixed Voltages with 24Vac Transformer Schneider Electric | 028-6155-10_Catalog-SE8000-SE7000_EN www.schneider-electric.com/buildings September 2019 41 Energy savings for a healthy bottom line Increase the comfort of patients, visitors, and employees while reducing energy consumption with our Series room controllers 028-6155-10_Catalog-SE8000-SE7000_EN www.schneider-electric.com/buildings September 2019 42 Healthcare Gain full room control of your environment, whether it's a patient room, waiting room, or anywhere within your facility. Our Series room controllers give you the flexibility to customise and configure based on your needs. Retail Enhance your system operation and efficiency with the Series room controllers. From a stand-alone device to simplified building management, Schneider Electric room controllers are ideal for your ever-changing location. Education Whether it's a large campus with multiple buildings or a single primary school, the room controllers allow for scalability to control a wide variety of environments through occupied and unoccupied periods. Hotels/lodging Guest comfort meets energy efficiency with room controllers. The intuitive user interface allows guests to control their own environments while our occupancy sensor and simple programming ensure efficiency. Commercial buildings room controllers allow users to save costs and energy while providing a comfortable environment for maximum productivity. The system can be modified on site to match your specific energy conservation needs. For more information, please visit www.schneider-electric.com Schneider Electric Jägershillgatan 18 Malmö SE-213 75, Sweden Tel.: +46 40 386 850 Schneider Electric Boston ONE Campus 800 Federal Street Andover, MA, USA Tel.: +1 (800) 225-0962 Schneider Electric 13th Floor, East Wing, Warwick House, Taikoo Place, 979 Kings Road, Quarry Bay, Hong Kong Tel.: +852 2980 8528 028-6155-10_Catalog-SE8000-SE7000_EN www.schneider-electric.com/buildings September 2019Adobe PDF Library 15.0 Adobe InDesign 14.0 (Windows)