ROBOT RB120 BLUETOOTH SPEAKER
USER MANUAL
Please read this user manual completely and keep it for future reference.
Getting Started
- A. Power/Mode button
- B. Volume + / Next track button
- C. Microphone
- D. Play/Pause button
- E. Bluetooth / Charging indicator light
- F. Volume - / Previous track button
- G. AUX port
- H. Type-C charging port
- I. TF card port
1. Turn ON/OFF
Press the Power/Mode button (A) to turn the speaker ON or OFF.
2. Pair with your device
Ensure Bluetooth is enabled on your device. The speaker will enter Bluetooth pairing mode automatically when turned on. Connect to "ROBOT RB120" from your device's Bluetooth list.
3. Play music in TF card
Insert a TF card into the TF card port (I). The speaker will automatically play music from the TF card.
4. Charge
Connect the Type-C charging port (H) to a power source using a compatible cable. The indicator light (E) will show a steady amber color while charging and turn off when fully charged.
Controls
- Press: Turn ON/OFF.
- Press and hold (>2s): Cycle switch between Bluetooth, TF card, and AUX audio source modes.
- Press: Increase volume.
- Press and hold (>2s): Play the next track.
- Press: Play or pause music.
- Double click: Initiate TWS connection.
- Press: Decrease volume.
- Press and hold (>2s): Play the previous track.
TWS Connect
Connecting Two Speakers
To achieve dual surround sound, you can connect two ROBOT RB120 speakers. Turn on both speakers and ensure they are in Bluetooth mode. On one speaker, double-click the Play/Pause button (D). You will hear a sound indicating the TWS connection is being attempted. Once successfully connected to each other, connect your Bluetooth device to one of the speakers (e.g., "ROBOT RB120"). Both speakers will then play audio in stereo.
Specifications
| Parameter | Details |
|---|---|
| Model | RB120 |
| Bluetooth version | Bluetooth 5.3 |
| Working distance | ≤10M |
| Output Power | 5W |
| Play Time | 8 Hours |
| Charging Time | 3 Hours |
| Power Input | 5V 1A |
Important Information
Attention
- Use original or certified cables.
- Do not expose to liquids.
- Do not disassemble.
- Avoid dropping.
- Avoid extreme temperatures.
Safety Precautions
- Do not charge near water sources or in the rain to prevent electric shock.
- Please follow the instructions for all operations and use.
- Do not damage the cable, especially at the connector.
- Unplug the USB charging cable when it is not in use or during a thunderstorm.
- Please keep the speaker away from heat sources (including all equipment that generates heat), such as stoves.
- Do not disassemble the speaker.
- Use officially certified chargers and cables (UL, CSA, VDE, CCC).
- If you have any questions, please contact the ROBOT customer service team.
Customer Service
- 12-month limited warranty
- Lifetime technical support
FCC Compliance
FCC Statement
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1) This device may not cause interference. 2) This device must accept any interference, including interference that may cause undesired operation of the device. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna; increase the separation between the equipment and receiver; connect the equipment into an outlet on a circuit different from that to which the receiver is connected; consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
FCC Radiation Exposure Statement
This device complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.