28 févr. 2022 — Designed specifically for use with CITY MULTI outdoor units. • Choice of three fan speeds for optimum comfort. • Built-in condensate lift; lifts to 27-9/16" ...
Mitsubishi City Multi PEFY Series 48,000 BTU - Indoor - Medium Static - Ceiling-Concealed - VRF Heat Pump - 230/1 | Ferguson
Job Name: Schedule Reference: Submitted To: Engineer: Submittal Data: PEFY-P48NMAU-E4 48,000 BTU/H Medium Static Ceiling-Concealed Ducted Location: Submitted By: Reference: Date: Approval: Construction: Application: · Designed specifically for use with CITY MULTI outdoor units · Choice of three fan speeds for optimum comfort · Built-in condensate lift; lifts to 27-9/16" (700mm) · 9-7/8" (250mm) high for low ceiling heights · Highly efficient DC motor · Dual setpoint functionality 7 · IT Terminal (CN105) Images provided for reference purposes only Rated Capacity: ( Cooling / Heating capacity indicated at the maximum value at operation under the following conditions Note: 1, 2 ) Cooling 1 Heating 2 Btu/h Btu/h 48,000 54,000 Specifications: Power Supply Minimum Circuit Ampacity (MCA) 3 208/230V, 1Ph, 60Hz A 4.38 Maximum Fuse/Breaker Size A 15 Fan Type x Quantity Sirocco fan x 3 Motor Type x Quantity DC motor x 1 Airflow Rate CFM 918 - 1,112 - 1,306 External Static Pressure (Selectable) In. WG <0.14> - 0.20 - <0.28> - <0.40> - <0.60> Sound Pressure Level (measured in anechoic room) dB(A) 35-40-44 Drain Pipe Size In. (mm) O.D.1-1/4 (32) External Finish Galvanized steel plate Coil Type Cross fin (Aluminum fin and copper tube) Air Filter PP honeycomb fabric. H: In. (mm) 9-7/8 (250) Unit Dimensions W: In. (mm) 55-1/8 (1,400) D: In. (mm) 28-7/8 (732) Net Weight Lbs. (kg) 86 (39) Refrigerant Pipe Diameter (gas) (Brazed) In. (mm) 5/8 (15.88) Refrigerant Pipe Diameter (liquid) (Brazed) In. (mm) 3/8 (9.52) Model No. Description: (Optional Accessories) PAC-YU25HT External Heater Adapter FBM2-4-A PAC-KE94TB-E Filter Box and Filter(s) (MERV13) Filter Box Notes: Note: 1. Cooling (Indoor // Outdoor) 80°F (26.7°C) DB, 67°F (19.4°C) WB // 95°F (35°C) DB 2. Heating (Indoor // Outdoor) 70°F (21.1°C) DB // 47°F (8.3°C) DB, 43°F (6.1°C) WB 3. All electrical work shall comply with National (CEC) and local codes and regulations. 4. Ventilation air to be introduced independent of or in series with VRF indoor units. Please refer to local codes for the required ventilation rates specific to the application. 5. Applications should be restricted to comfort heating and cooling only; process/equipment heating and cooling applications are not recommended. 6. Mitsubishi Electric Sales Canada Inc. (MESCA) supports the use of only MESCA supplied and approved components and accessories for proper functioning of the unit(s). Always consult relevant technical product documentation at mitsubishitechinfo.ca, your local distributor or MESCA BC sales office as applicable. Use of non - MESCA supported components and accessories will affect warranty coverage. MESCA recommends (A) consideration of all applicable design and application parameters and requirements specific to any project; and (B) implementation of any countermeasures needed to address those parameters and requirements, including the provision of antifreeze solution in water based systems used in conjunction with ducted indoor units. 7. All components of the system must be compatible. For more details on system control compatibility, please refer to Technical Bulletin 100-151 available on our website. 8. Should any person change this document in any manner whatsoever without MESCA's written permission, the document shall be of no force and effect and any change shall be deemed to be a representation and warranty made by that person and not MESCA. That person, and not MESCA, shall assume full responsibility for the consequences of such changes. MESCA assumes no responsibility for any consequences in such cases. www.MitsubishiElectric.ca © 2022 Mitsubishi Electric Sales Canada Inc. Page 1 of 3 Specifications are subject to change without notice. Form No. SB_PEFY-P48NMAU-E4_202202 40 (1-5/8) 200 (7-7/8) Submittal Data: PEFY-P48NMAU-E4 Indoor Unit Outline and Dimensions: www.MitsubishiElectric.ca © 2022 Mitsubishi Electric Sales Canada Inc. Opposite piping side view Drain pipe (O.D. Ø32 (1-1/4) (Emergency drain) Bottom Outlet air side view 15 (5/8) Top 2XE-Ø2.9 (1/8) Top view 378 (14-15/16) 120° (4Ø-1152/516) 120° 135 (5-3/8) Note 1. Use an M10 screw for the suspension bolt (field supply). 2. Keep the service space for maintenance at the bottom. 3. This drawing is for PEFY-P24·27·30NMAU-E4 models, which 153 (6-1/16) have 2 fans. PEFY-P06·08·12NMAU-E4 models have 1 fan. PEFY-P15·18NMAU-E4 models have 2 fans. Fresh air intake Ø100 (3-15/16) knock out hole Note 5 3-Ø2.9 (1/8) mount hole PEFY-P36·48·54NMAU-E4 models have 3 fans. 4. If the inlet duct is used, remove the air filter (supplied with the unit), then install the filter (field supply) at the suction side. 5. Heat air to 0°C (32°F) or higher when taking fresh air Inlet air side view with a fresh air intake. 18 (3/4) 210 (8-5/16) A B (Suspension bolt pitch) C G 100 (3-15/16)X(E-1)=F D (Duct) Page 2 of 3 58 (2-5/16) 73 (2-7/8) 100 (3-15/16) 40 (1-5/8) 40 (1-5/8) 122 (4-13/16) 23 (15/16) 178 (7-1/16) (DUCT) 100 (3-15/16) 33 (1-5/16) Specifications are subject to change without notice. Form No. SB_PEFY-P48NMAU-E4_202202 Air Air outlet inlet 100 (3-15/16) 10 (7/16) 30 (1-3/16) 20 (13/16) 57 (2-1/4) 32 (1-5/16) 2 Refrigerant piping brazing connection (liquid) (Suspension bolt pitch) 643 (25-3/8) 732 (28-7/8) 700 (27-9/16) 238 (9-3/8) 10 (7/16) Drain pipe (Integral lift pump outlet) (O.D.Ø32 (1-1/4)) Drain pump Top 41 (1-5/8) 217 (8-9/16) 250 (9-7/8) 2x2-Ø2.9 (1/8) 1 Refrigerant piping brazing connection (gas) (5-3/8) (2-11/16) Piping side view 136 67 356 (14-1/16) Bottom Control box Terminal block (Transmission) Terminal block (Power source) Drain pipe (O.D.Ø32 (1-1/4)) (Gravity drain) 23 (15/16) 21 (7/8) Air filter Model 1 Gas pipe PEFY-P06,08,12NMAU-E4 Ø12.7 PEFY-P15,18NMAU-E4 (1/2) Unit:mm(in.) 2 Liquid pi Ø6.35 (1/4) PEFY-P24,27,30NMAU-E4 PEFY-P36,48NMAU-E4 PEFY-P54NMAU-E4 Ø15.88 (5/8) Ø9.52 (3/8) Unit:mm(in.) Model A B C D E F G PEFY-P06,08,12NMAU-E4 700 (27-9/16) 754 (29-11/16) 800 (31-1/2) 660 (26) 7 600 658 (23-5/8) (25-15/16) PEFY-P15,18NMAU-E4 900 954 1000 860 (35-7/16) (37-9/16) (39-3/8) (33-7/8) 9 800 858 (31-1/2) (33-13/16) PEFY-P24,27,30NMAU-E4 1100 (43-5/16) 1154 (45-7/16) 1200 (47-1/4) 1060 (41-3/4) 11 1000 1058 (39-3/8) (41-11/16) PEFY-P36,48NMAU-E4 1400 1454 1500 1360 (55-1/8) (57-1/4) (59-1/16) (53-9/16) 14 1300 1358 (51-3/16) (53-1/2) PEFY-P54NMAU-E4 1600 (63) 1654 1700 1560 (65-1/8) (66-15/16) (61-7/16) 16 1500 1558 (59-1/16) (61-3/8) Unit : mm(in.) Fan Characteristics Curves: Submittal Data: PEFY-P48NMAU-E4 Note: MERV13 filter Box & Filter is not reflected in these displayed curves, reference Form # SB_FBM2-Series_Filter_Boxes for full details. Page 3 of 3 www.MitsubishiElectric.ca © 2022 Mitsubishi Electric Sales Canada Inc. Specifications are subject to change without notice. Form No. SB_PEFY-P48NMAU-E4_202202Acrobat Distiller 20.0 (Windows)