YYK-Q16S Ear-Mounted Wireless Headphones

Product Specifications

Product Name: YYK-Q16S Ear-mounted Wireless Headphones

Operation

Multi-function Key (MFB) Controls

• Pause/Play: Click the MFB key.
• Previous Track: Long press the L-side MFB key for 1 second.
• Next Track: Long press the R-side MFB key for 1 second.
• Volume Up: Double-click the L-side MFB key.
• Volume Down: Double-click the R-side MFB key.
• Answer Call: Click the MFB key.
• Hang Up Call: Click the MFB key.
• Reject Call: Hold down the MFB key for 1 second.
• Cancel Call: Click the MFB key.
• Call Siri: While not playing music, triple-click the left or right MFB key.
• Cancel Siri: Click the left or right MFB key.

Power On/Off

• Power On: When the headset is taken out of the charging chamber for the first time, it will turn on automatically.
• Power Off: Put the headset back into the charging chamber; it will start charging and automatically shut down. When the headset is not in use, placing it back into the charging chamber turns it off automatically.

How to Reset

In the disconnected state, double-click and hold for 2 seconds, then power off. Reset is complete.

Pairing Instructions

Mobile Device Pairing

1. Take the headsets out of the charging chamber to power on.
2. The headsets will pair automatically.
3. On your mobile phone/tablet, go to Settings > Bluetooth.
4. Turn on Bluetooth, search for "YYK-Q16S", and select "Pair/Connect" to play music.

Computer/Laptop Pairing

1. Open Computer Settings > Devices > Bluetooth & other devices.
2. Enable Bluetooth.
3. Select "Add Bluetooth or other device".
4. Search for the Bluetooth device "YYK-Q16S", and select "Pair/Connect" to play music.

Note: If your computer does not have Bluetooth, please insert a Bluetooth adapter and download the Bluetooth driver before normal use.

Charging Instructions

Charging the Headsets

1. Place the headsets into the charging compartment. They will automatically shut down and begin charging. The charging indicator on the charging chamber will show the charging status.
2. When charging, the headset indicator light is solid red. When fully charged, the indicator light turns blue for 10 seconds before turning off.

Charging the Charging Chamber

Please use a mobile phone adapter to charge the charging chamber. A computer Type-C cable or other chargers with a Type-C interface can also be used.

Safety Precautions

To prolong the service life of these high-quality headphones, please follow these instructions:

• Keep away from high temperature, high humidity, and corrosive environments.
• Prevent the product from being hit, dropped, bent, or soaked.
• Do not disassemble the headsets or charging stand.
• Avoid overcharging the product to prevent reducing its service life.
• If any discomfort or pain occurs, please stop using the product.
• Use a DC 5V-1A adapter certified by a regulated manufacturer.

Repeated charging and discharging of the headsets will cause battery performance to decrease over time, which is normal for all rechargeable electronic products.

Package Contents

• 2 x Bluetooth Headsets
• 1 x Charging Base
• 1 x Type-C Charging Cable
• 1 x User Manual

FCC Warning

15.19 Labeling requirements: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

15.21 Information to user: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

15.105 Information to the user: Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC RF Radiation Exposure Statement:

1. This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
2. This equipment complies with RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 5mm between the radiator and your body.