FUSION SPLICING SYSTEMS - AFL Global

24 gen 2022 — AFL is a value-added supplier. We strive to provide more than just a product and look far beyond the current sale in an effort to build a long term, ...

[PDF] FUSION SPLICING SYSTEMS - AFL Globalwww.aflglobal.com › getfile

Catalogs

Google Docs
Google Drive
Download [pdf]

File Info : application/pdf, 64 Pages, 14.36MB

AFL-Fusion-Splicing-Systems ; filename*=utf-8''AFL-Fusion-Splicing-Systems

FUSION SPLICING SYSTEMS
Fusion Splicers | Cleavers | Tools & Supplies | Software

AFL is a value-added supplier. We strive to provide more than just a product and look far beyond the current sale in an effort to build a long term, business relationship with our customers. The Fusion Splicing team provides fast, dependable support after the sale centered on service, trust, and friendship in support of customer needs.
Some of the positive, proactive things we do include:
· Free 24/7 technical support for all AFL customers - 800-866-3602 · Free software upgrades that enhance equipment performance and customer satisfaction · Free product demonstrations for guiding customers and understanding their needs · Free training videos to enhance the customer learning experience · Engineering support to assist with special splicing applications · High quality repair service using only Fujikura approved parts and repair techniques · Best in the industry repair turnaround time to minimize customer down time · Optional expedited repair service for special time critical customer events · Loaner equipment for special case circumstances, when available · Large supply of inventory, enabling short lead-times for critical need products · A staff dedicated to serving the customer's needs quickly and efficiently
Thank you for choosing AFL and Fujikura fusion splicing products! Please visit us online at ww.AFLglobal.com.

Fusion Splicing Systems

Table of Contents

Field Fusion Splicing Equipment

Splicers Single Fiber

Fujikura 90S+ Fusion Splicer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Fujikura 41S+ Fusion Splicer

. . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Splicers Ribbon Fiber Fujikura 90R Fusion Splicer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Fujikura 12R Fusion Splicer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Cleavers CT50 Fiber Cleaver. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 CT08 Fiber Cleaver. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Strippers Thermal Strippers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Splice Protection Splice Protection Sleeves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Ribbon Fiber Tools

RT-02 Ribbonizing Tool

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

FST-12 Fiber Separation Tool. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Fiber Arrangement Tool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Ribbon Forming Adhesive. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Cleaning Splicer V-groove Cleaning Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Misc. Accessories Portable Tripod Workstation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 ASW-02 Splicing Workstation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 TJ-03 Temporary Joining Tool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Specialty Fusion Splicing Equipment

Splicers

LZM-125A+ Splicing System

. . . . . . . . . . . . . . . . . . . . . . . . . . 29

LZM-125M/LZM-125P Splicing System . . . . . . . . . . . . . . . . . . . 31

LZM-125M+/LZM-125P+ Splicing System

. . . . . . . . . . . . . . . . 33

LZM-100 LAZERMaster® Laser Splicing System . . . . . . . . . . . . . . . . . . 35

Recoaters and Splice Protection FSR-05, FSR-06 and FSR-07 Optical Fiber Recoaters. . . . . . . . . . . . . . . 37 Splice Protection Sleeves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

Cleavers

CT52 Fiber Cleaver. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

CT58 Fiber Cleaver. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

CT-101 and CT-102 Fiber Cleavers . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

CT-104, CT-105 and CT-106 Fiber Cleavers. . . . . . . . . . . . . . . . . . . . . 47

CT-104+, CT-105+ and CT-106+ Fiber Cleavers

. . . . . . . . . . . . 50

PowerCleave®. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

Stripping, Cleaning and Fiber Prep Automation AFL PowerStrip® . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54 High Tensile Stripper. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55 PCS-100 Polyimide Coating Stripper. . . . . . . . . . . . . . . . . . . . . . . . . . 56 APM-101 and APM-102 Automatic Preparation Machine. . . . . . . . . . . 57 USC-03 Ultrasonic Cleaner. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58

Services Optimization Services. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59

AFLglobal.com | 800.235.3423 1

1.24.2022

Fusion Splicing Systems

AFLglobal.com | 800.235.3423

1.24.2022 2

Single Fiber Splicers

Fusion Splicing

90S+ In Work Tray Wind Protector Open

Fujikura 90S+ Fusion Splicer
The Fujikura 90S+ core alignment fusion splicer solves common problems seen in the field-- from splicing poor quality legacy fiber to automated equipment maintenance and upkeep. The Fujikura 90S+ can be use in multiple field splicing applications including bend-insensitive fibers in drop cables, long-haul terrestrial and submarine LEAF® fibers, loose buffer fiber, splice-on connectors, and the list goes on. The speed and accuracy of the 90S+ make it suitable for certain production and specialty environments where high output, tight packaging, and low loss requirements are required.
Regardless of your scenario, the Fujikura 90S+ is designed to keep you in the field with an extended battery life of 300 splice and heat cycles. With its multiple automated and easy-touse features, the 90S+ alleviates the need for traditional operation tasks such as frequent arc calibrations, cleaver blade rotations, cleaver usage tracking, and manual splicing operations. A redesigned work tray, cooling tray, and optional cable clamp make the 90S+ kit more versatile than its predecessors in adapting to varying work conditions and environments.
When splicing loose buffer fiber, additional sheath clamps are not needed. The standard universal sheath clamp now handles both loose and tight buffer fibers. The new Active Fusion Control (AFC) technology improves splice losses for fibers that possess a poor cleave angle. Combined with Active Blade Management between the splicer and cleaver, the Fujikura 90S+ contains a robust set of splicing features that will reduce the likelihood of poor splice installations or repairs.

Features
· Cleaver tracking and upkeep with wireless communication
· Improved real-time arc control for fibers with poor cleave angles
· Automated wind protector, sheath clamps and splice operation
· Loose and tight buffer with same sheath clamp
· Lithium-ion battery with 300 splices/shrinks per charge
· PC software and 90S+ manual downloaded from splicer
· Multi-function transit case with integrated workstation

Applications
· Distribution fiber repair · Long-haul network installation · Field termination with
splice-on connectors · Access network installation · Fanout kits, pigtails and splice cassettes · OSP cable installation and repair · Optical modules splitters, couplers,
MUXs, EDFAs and attenuators

AFLglobal.com | 800.235.3423

Specifications are subject to change without notice.

Fusion Splicing

Single Fiber Splicers

Fujikura 90S+ Fusion Splicer

Ordering Information
DESCRIPTION 90S+ Fusion Splicer (machine only) Includes: ADC-20 AC Adapter, ACC-14 AC Cord, BTR-15 Battery, ELCT2-16B Spare Electrodes (pair), Sheath Clamps, SP-03 Fiber Holder Set Plates, USB-01 Cable, Alcohol Dispenser, Screwdriver, Splicer Carrying Strap, Quick Reference Guide, TS-03 Tripod Screw, Work Tray J-Plate, SS03 single fiber stripper, CC39 Transit Case with Carrying Strap and Two Year Warranty 90S+ Fusion Splicer Kit (with cleaver) Includes: CT50 Cleaver, ADC-20 AC Adapter, ACC-14 AC Cord, BTR-15 Battery, ELCT2-16B Spare Electrodes (pair), Sheath Clamps, SP-03 Fiber Holder Set Plates, USB-01 Cable, Alcohol Dispenser, Screwdriver, Splicer Carrying Strap, Quick Reference Guide, TS-03 Tripod Screw, Work Tray J-Plate, SS03 single fiber stripper, CC39 Transit Case with Carrying Strap and Two Year Warranty 90S+ Fusion Splicer without Bluetooth (machine only) Includes: ADC-20 AC Adapter, BTR-15 Battery, ACC-14 AC Cord, ELCT2-16B Spare Electrodes (pair), Sheath Clamps, SP-03 Fiber Holder Set Plates, USB-01 Cable, Alcohol Dispenser, Screwdriver, Splicer Carrying Strap, Quick Reference Guide, TS-03 Tripod Screw, Work Tray J-Plate, SS03 Single Fiber Stripper, CC39 Transit Case with Carrying Strap and Two Year Warranty One Year Extended Warranty Two Year Extended Warranty

AFL NO. S017519
S017521
S017520
S012996 S013000

Recommended Products for the 90S+
DESCRIPTION Cleavers CT08 Cleaver CT50 Cleaver Fiber Holders (pair) FH-70-250 (250 m coated fiber) FH-70-900 (900 m jacketed fiber) FH-70-160 (160 m coated fiber) FH-70-200 (200 µm coated fiber) FH-60-LT900 (Loose buffer 900 m fiber) FUSEConnect® Accessories FH-FC-20 (900 µm within 2.0 mm sheathing) (each) FH-FC-30 (900 µm within 3.0 mm sheathing) (pair) FH-FC-900 (900 µm cable) (each) CLAMP-FC-2000 (pair) CLAMP-FC-3000 (pair) Power Supply Options and Equipment ADC-20 AC Adapter ACC-14 AC Power Cord BTR-15 Battery DCC-20 Power Cord (connects AC Adapter to cigarette lighter socket) DCC-21 Power Cord (connects AC Adapter to power source via alligator clips)

AFL NO.
S017004 S017030
S017111 S017113 S017095 S017711 S015181
S014696 S014695 S014697 S014705 S014704
S017513 S014536 S017512 S017527
S017528

DESCRIPTION Miscellaneous SS03 Single fiber stripper (3 hole) SS01 Single fiber stripper (1 hole) ELCT2-16B Electrodes SP-03 Fiber Holder Set Plates S90 Universal Sheath Clamps Portable Tripod Workstation (see product profile for more detail) ASW-02 Splicing Workstation (see product profile for more detail) WT-09R Work Tray Right WT-09L Work Tray Left JP-09 Work Tray J-Plate JP-10 J-Plate (Cooling tray attaches to splicer) JP-10-FC J-Plate with Fiber Clamps TS-03 Tripod Screw (90 Series) ST-02 Fusion Splicer Strap CLAMP-DC-12 (Drop cable clamp for work tray) USB-01 Cable CC39 Transit Case Splicer V-Groove Cleaning Kit

AFL NO.
S017098 S017099 S017103 S017518 S017696 S014773 S010532 S017515 S017516 S017517 S017522 S017523 S017524 S017525 S017550 S014777 S017514 S014397

Fiber Holders · Wide range of sizes for various applications
· Loose & Tight Buffer options available

Portal Tripod Work Station · Sturdy work tray supports the splicer,
cleaver and accessories
· Tripod supports a load capacity of up to eleven pounds

V-Groove Cleaning Kit · Removes environmental contamination from
the v-groove of the splicer
· Maintains performance and ensures fiber alignment

AFLglobal.com | 800.235.3423

Specifications are subject to change without notice.

Fusion Splicing

Single Fiber Splicers

Fujikura 90S+ Fusion Splicer

Specifications
PARAMETER Fiber Alignment Method Fiber Count Can Be Spliced
Applicable Fiber
Applicable Coating

Fiber Type
Cladding Diameter Sheath Clamp

Fiber Splice Performance
Applicable Protection Sleeve Sleeve Heat Performance Fiber Tensile Test Force Electrode Life Physical Description
Environmental Condition AC Adaptor
Battery Pack
Display Illumination Interface
Data Storage Screw Hole For Tripod

Splice Loss
Splice Time
Sleeve Type Sleeve Length Sleeve Dia.
Heat Time
Dimensions W Dimensions D Dimensions H Weight
Temperature
Humidity
Altitude Input Type Output Capacity
Temperature
Battery Life Recharge Time LCD Monitor Magnification V-Grooves PC External Led Lamp Ribbon Stripper Wireless Splice Mode Heat Mode Splice Result Splice Image

Other Features

Automatic Functions
Reference Guide Sheath Clamp Electrode

VALUE Active core alignment Single fiber Single-mode optical fiber Multimode optical fiber 80 to 150 m Coating dia.: Max. 3,000 m Cleave length: 5 to 16 mm ITU-T G.652: Avg. 0.02 dB ITU-T G.651: Avg. 0.01 dB ITU-T G.653: Avg. 0.04 dB ITU-T G.654: Avg. 0.04 dB ITU-T G.655: Avg. 0.04 dB ITU-T G.657: Avg. 0.02 dB SM FAST mode: Avg. 8 to 10 sec. SM AUTO mode: Avg. 11 to 13 sec. AUTO mode: Avg. 14 to 16 sec. Heat-shrinkable sleeve Max. 66 mm Max. 6.0 mm before shrinking 60 mm slim mode: Avg. 9 to 10 sec. 60 mm mode: Avg. 13 to 15 sec. Approx. 2.0 N Approx. 5,000 splices Approx.170 mm without projection Approx.173 mm without projection Approx.150 mm without projection Approx. 2.8 kg including battery Operate: -10 to 50oC Storage: -40 to 80oC Operate: 0 to 95% RH non-condensing Storage: 0 to 95% RH non-condensing Max. 5,000 m AC100 to 240 V, 50/60 Hz, Max. 1.5 A Rechargeable Lithium Ion Approx. DC14.4V / 6,380 mAh Approx. 300 splice and heat cycles Recharge: 0 to 30oC Storage: -20 to 30oC Approx. 500 recharge cycles Approx. 5-8 hours from empty TFT 5 inches with touch screen 200 to 320x LED lamp USB2.0 Mini B type USB2.0 A type, Approx. DC5V, 500 mA Mini DIN 6 pin, DC12V, Max. 1A Bluetooth 4.1 LE 100 splice modes 30 heat modes 20,000 splices 100 images 1/4-20 UNC Splice mode select by fiber type analysis Discharge power calibration Wind protector: open/close Sheath clamp: open Heater lid: open/close Heater clamp: open/close Video and PDF file stored in splicer Easy sleeve positioning clamp Replaceable without tool

AFLglobal.com | 800.235.3423 5

Fusion Splicing

Single Fiber Splicers

Workstation in Transit Case Workstation on Transit Case

Fujikura 41S+ Fusion Splicer
The Fujikura 41S+ is a fully ruggedized, two camera, active cladding alignment fusion splicer. Enabled by Warm Splice Imaging (WSI), the 41S+ can determine the alignment of the fiber cores by observing the splice during the heating process. This delivers splice loss estimates with a greater level of accuracy than those based on cladding only alignment. Active Blade Management (ABM) via Bluetooth® connection with the CT50 Fiber Cleaver tracks usage and enables automated blade rotation as needed, mitigating fiber reburns. The new Active Fusion Control (AFC) technology further reduces reburns by improving splice losses for fibers with poor cleave angles. With the combination of ABM and AFC, the Fujikura 41S+ contains a robust set of splicing features that will reduce the likelihood of poor splice installations or repairs.
A 6-second splice time and 25-second shrink time offers unmatched speed and productivity, while an easy-to-use touchscreen monitor provides simple and intuitive menu navigation. Interchangeable sheath clamps or fiber holders provide versatility for user preference, and compatibility with splice-on connectors. The extended-life battery is rated for up to 200 splice and heat cycles. Long-life electrodes provide 5,000 splices and help minimize downtime for replacement and stabilization. The large 5" monitor provides a crystal-clear image, even in the brightest sunlight. Software updates are accomplished via the internet allowing users to quickly update their software as new splice programs become available.
Backed by the best service team in the industry, the Fujikura 41S+ is the ideal splicer to use when portability, ruggedness, and reliability are needed for splicing applications.

Features
· Warm Splice Imaging (WSI) loss estimation technology · Improved real-time arc control for fibers with poor cleave angles · Bluetooth enabled cleaver management · Two camera, active cladding alignment · 5" touchscreen monitor · Interchangeable sheath clamps and fiber holders · Fully ruggedized for shock, moisture and dust resistance · Extended-life electrodes, 5,000 splices, exchangeable without tools

Ordering Information
DESCRIPTION Fujikura 41S+ Fusion Splicer Includes: Fujikura 41S+ Fusion Splicer, S31A Sheath clamps (installed), FH-70-250 Fiber Holders (pair), FH-70-900 Fiber Holders (pair), SP-01 Set Plates, ADC-19A AC Adapter, BTR-11A Battery Pack (installed), ACC-09 Power Cord, ELCT2-16B Spare Electrodes (pair), Screwdriver, Operation Manual on CD, Quick Reference Guide, SS-03 Single Fiber Stripper and CC-36 Transit Case Fujikura 41S+ Fusion Splicer Kit with CT50 Cleaver Includes: Fujikura 41S+ Fusion Splicer, CT50 Cleaver, S31A Sheath clamps (installed), FH-70-250 Fiber Holders (pair), FH-70-900 Fiber Holders (pair), SP-01 Set Plates, ADC-19A AC Adapter, BTR-11A Battery Pack (installed), ACC-09 Power Cord, ELCT2-16B Spare Electrodes (pair), Screwdriver, Operation Manual on CD, Quick Reference Guide, SS-03 Single Fiber Stripper and CC-36 Transit Case One Year Extended Warranty Two Year Extended Warranty

AFL NO. S017090
S017091
S012996 S013000

AFLglobal.com | 800.235.3423

Specifications are subject to change without notice.

Single Fiber Splicers

Fusion Splicing

Fujikura 41S+ Fusion Splicer

Recommended Accessories
DESCRIPTION Cleavers CT50 Cleaver CT08 Cleaver Fiber Holders FH-70-250 Fiber Holder (pair) FH-70-900 Fiber Holder (pair) FH-60-LT900 Fiber Holder (pair) Batteries BTR-11A Battery Pack FUSEConnect® Accessories FH-FC-20 (900 µm within 2.0 mm sheathing) (each) FH-FC-30 (900 µm within 3.0 mm sheathing) (pair) FH-FC-900 (900 µm cable) (each) CLAMP-FC-2000 (pair) CLAMP-FC-3000 (pair)

AFL NO.
S017030 S017004
S017111 S017113 S015181
S017354
S014696 S014695 S014697 S014705 S014704

DESCRIPTION Miscellaneous CLAMP-S31A Sheath Clamps CLAMP-S31B Sheath Clamps for loose buffer 900 µm SP-01 Set Plate (pair) ELCT2-16B Electrodes ADC-19A AC Adapter ACC-09 Power Cord CC-36 Transit Case USB Cable Splicer V-Groove Cleaning Kit SS03 Single Fiber Stripper (3 hole) SS01 Single Fiber Stripper (1 hole)

AFL NO.
S017100 S017101 S017106 S017103 S017104 S014390 S017105 S014777 S014397 S017098 S017099

AFLglobal.com | 800.235.3423

Specifications are subject to change without notice.

Fusion Splicing

Single Fiber Splicers

Fujikura 41S+ Fusion Splicer

Specifications

PARAMETER Fiber alignment method Fiber count can be spliced

Applicable optical fiber

Fiber type

Applicable coating

Cladding dia. Sheath clamp

Fiber splice performance
Applicable protection sleeve Sleeve heat performance Fiber tensile test force Electrode life Physical description
Environmental condition
AC adaptor
Battery pack Display Illumination Interface Data storage Screw hole for tripod Other features

Splice loss
Splicing time
Sleeve type Sleeve length Sleeve dia. Heat time
Dimensions W Dimensions D Dimensions H Weight
Temperature
Humidity
Altitude Input Type Output Capacity
Temperature
Battery life LCD monitor Magnification V-grooves PC Wireless Splice mode Heat mode Splice result Fiber image
Automatic functions Sheath clamp Loss Estimate Electrode

AFLglobal.com | 800.235.3423

VALUE Active cladding alignment Single fiber Single mode optical fiber Multi mode optical fiber Approx.125 m Coating dia. : Max. 3000 m Cleave length : 5 to 16 mm ITU-T G.652 : Avg. 0.03 dB ITU-T G.651 : Avg. 0.01 dB ITU-T G.653 : Avg. 0.05 dB ITU-T G.655 : Avg. 0.05 dB ITU-T G.657 : Avg. 0.03 dB SM FAST mode : Avg. 6 sec. AUTO mode : Avg. 9 sec. Heat shrinkable sleeve Max. 66 mm Max. 6 mm before shrinking 60 mm mode : Avg. 26sec. Approx. 2.0 N Approx. 5,000 splices Approx.131 mm without projection Approx.201 mm without projection Approx.79 mm without projection Approx. 1.3 kg including battery Operate : -10 to 50oC Storage : -40 to 80oC Operate : 0 to 95% non-condensing Storage : 0 to 95% non-condensing Max. 5,000m AC100 to 240V, 50/60Hz, Max. 1A Rechargeable Lithium Ion Approx. DC14.4V, 3360mA Approx. 200 splice and heat cycles Recharge : 0 to 40oC Storage : -20 to 30oC Approx. 500 recharge cycles TFT 5.0 inches with touch screen 132 to 300x LED lamp USB2.0 MINI B type Bluetooth® 4.1 LE 100 splice modes 30 heat modes 10,000 results 100 images 1/4-20UNC Fiber heat calibration Easy sleeve positioning Warm splice image estimation Tool less replaceable electrode

Specifications are subject to change without notice.

Ribbon Fiber Splicers

Fusion Splicing

90R In Work Tray

Fujikura 90R Fusion Splicer
The Fujikura 90R is the mass fusion splicer workhorse of the splicing world. As data demand continues to rise, the solution to handle the increased traffic is to increase fiber counts. As a result, fiber counts being utilized in enterprise data centers, campus, and metro networks have grown enough to make single fiber splicing too costly and timely. High density cabling made possible by SpiderWeb Ribbon® (SWR®) and others like it are spurring ribbon splicing activity in places that have traditionally used loose fiber. The 90R is the answer to these changes in splicing demand. With automated splice start, tube heater, wind protector, cleave tracking, and blade rotations for up to 2 cleavers at a time, this splicer frees up operator time for other fiber preparation steps. New to the 90R, you can keep your splicer in the field longer with field replaceable V-grooves. When V-grooves can no longer be cleaned after extended use, or are accidentally damaged, you can resume splicing in minutes by installing the spare set included with your 90R kit. Put our 90R to the test by contacting us to see its capabilities first-hand, 1-800-235-3423.

Features
· Cleaver tracking and upkeep with wireless communication
· Automated wind protector, tube heater and splice operation
· User replaceable v-grooves · 200 µm and 250 µm SWR universal
ribbon prep accessories · Graphical User Interface with
5.0" Touchscreen · PC software and 90R manual
downloaded from splicer · Multi-function transit case with
integrated workstation

Applications
· Data Center cable installation · High fiber count metro and
campus networks · Long-haul network installs and repair · Trunk cable repair with Splice-on MPOs · Ribbon splicing high density cables with
200 µm loose fiber

Wind Protector Open

AFLglobal.com | 800.235.3423

Specifications are subject to change without notice.

Fusion Splicing

Ribbon Fiber Splicers

Fujikura 90R Fusion Splicer

Ordering Information
DESCRIPTION 90R Fusion Splicer (machine only) Includes: BTR-15 Battery, ADC-20 AC Adapter, ACC-14 AC Cord, ELCT2-16B Spare Electrodes (pair) with spare V-Grooves (VG12-01), FH-70-12 Fiber Holders (pair), USB Cable, Alcohol Dispenser, Splicer Carrying Strap, Quick Reference Guide, TS-03 Tripod Screw, Video Instruction Manual, Work Tray, CC-39 Transit Case with Carrying Strap and Two Year Warranty 90R Fusion Splicer Kit (with cleaver & thermal stripper) Includes: BTR-15 Battery, CT50 Cleaver, RS03 Stripper, ADC-20 AC Adapter, ACC-14 AC Cord, ELCT2-16B Spare Electrodes (pair) with spare V-Grooves (VG12-01), FH-70-12 Fiber Holders (pair), USB Cable, Alcohol Dispenser, Splicer Carrying Strap, Quick Reference Guide, TS-03 Tripod Screw, Video Instruction Manual, CC-39 Transit Case with Carrying Strap and Two Year Warranty 90R Fusion Splicer without Bluetooth (machine only) Includes: BTR-15 Battery, ADC-20 AC Adapter, ACC-14 AC Cord, ELCT2-16B Spare Electrodes (pair) with spare V-Grooves (VG12-01), FH-70-12 Fiber Holders (pair), USB Cable, Alcohol Dispenser, Splicer Carrying Strap, Quick Reference Guide, TS-03 Tripod Screw, Video Instruction Manual, CC-39 Transit Case with Carrying Strap and Two Year Warranty 90R Fusion Splicer Kit without Bluetooth (with cleaver & thermal stripper) Includes: BTR-15 Battery, CT50 Cleaver, RS01 Stripper, ADC-20 AC Adapter, ACC-14 AC Cord, ELCT2-16B Spare Electrodes (pair) with spare V-Grooves (VG12-01), FH-70-12 Fiber Holders (pair), USB Cable, Alcohol Dispenser, Splicer Carrying Strap, Quick Reference Guide, TS-03 Tripod Screw, Video Instruction Manual, CC-39 Transit Case with Carrying Strap and Two Year Warranty One Year Extended Warranty Two Year Extended Warranty

AFL NO. S017509
S017511
S017540
S017510
S012996 S013000

Recommended Products for the 90R
DESCRIPTION Cleavers and Strippers CT50 Cleaver RS01 Thermal Stripper RS02 Thermal Stripper RS03 Thermal Stripper Fiber Holders (pair) FH-70-2 FH-70-4 FH-70-6 FH-70-8 FH-70-10 FH-70-12 FH-70-12PC (pitch conversion holder for 200 m loose fibers) FH-70-12-200 (200 µm pitch ribbons) FH-70-16 FH-70-250 (250 m coated single fiber) FH-70-900 (900 m jacketed single fiber) FH-60-LT900 (Loose buffer 900 m fiber) FUSEConnect® Accessories FH-FC-20 (900 µm within 2.0 mm sheathing) (each) FH-FC-30 (900 µm within 3.0 mm sheathing) (pair) FH-FC-900 (900 µm cable) (each) CLAMP-FC-2000 (pair) Batteries and Power Cords ADC-20 AC Adapter BTR-15 Battery DCC-11 splicer to ribbon stripper power cord DCC-20 Power Cord Connects ADC-20 to cigarette lighter socket DCC-21 Power Cord Connects ADC-20 to power source via alligator clips ACC-14 AC Power Cord
AFLglobal.com | 800.235.3423

AFL NO.
S017030 S016815 S016816 S016817
S017114 S017115 S017116 S017117 S017118 S017119 S017464 S017681 S017533 S017111 S017113 S015181
S014696 S014695 S014697 S014705
S017513 S017512 S013852 S017527
S017528
S014536

DESCRIPTION Miscellaneous SS01 Single fiber stripper (1 hole) ELCT2-16B Electrodes Portable Tripod Workstation (see product profile for more detail) ASW-02 Splicing Workstation (see product profile for more detail) WT-09R Work Tray Right WT-09L Work Tray Left JP-09 Work Tray J-Plate JP-10 J-Plate (Cooling tray attaches to splicer) JP-10-FC J-Plate with Fiber Clamps TS-03 Tripod Screw (90 Series) ST-02 Fusion Splicer Strap CLAMP-DC-12 (Drop Cable clamp on work tray) FST-12 Fiber Separation Tool FAT-04 Fiber Arrangement Tool RT-02 Fiber Arrangement Tool VG12-01 12 fiber V-groove VG12-01-200 12 fiber V-groove (200µm pitch ribbons) VG04-01 4 fiber V-groove VG08-01 Spare 8 fiber V-grooves VG16-01 16 fiber V-groove FAA-03A Ribbon Forming Adhesive (4 oz. bottle) FAA-03A Ribbon Forming Adhesive (0.5 liter bottle) CC-39 Transit Case Splicer V-Groove Cleaning Kit

AFL NO.
S017099 S017103 S014773 S010532 S017515 S017516 S017517 S017522 S017523 S017524 S017525 S017550 S014012 S010212 S017465 S017548 S017680 S017551 S017508 S017552 S008720 S008622 S017514 S014397

Fiber Arrangement Tool · Features an easy-to-use fiber arrangement method
utilizing linear travel
· Includes a spare paste applicator

V-Groove Cleaning Kit · Removes environmental contamination from
the v-groove of the splicer
· Maintains performance and ensures fiber alignment

Specifications are subject to change without notice.

Fusion Splicing

Ribbon Fiber Splicers

Fujikura 90R Fusion Splicer

Specifications
PARAMETER Fiber Alignment Method Fiber Count Can Be Spliced
Applicable Fiber
Applicable Coating

Fiber Type
Cladding Dia. Fiber Holder

Fiber Splice Performance
Applicable Protection Sleeve Sleeve Heat Performance Fiber Tensile Test Force Electrode Life Physical Description
Environmental Condition Ac Adaptor
Battery Pack
Display Illumination Interface
Data Storage Screw Hole For Tripod

Other Features

Automatic Functions
Reference Guide Electrode

VALUE Self cladding alignment with melting surface tension Up to 16 fiber ribbon Single mode optical fiber Multi mode optical fiber Approx. 125 m Coating shape. : Refer to fiber holder options Cleave length : 10 mm ITU-T G.652 : Avg. 0.05 dB ITU-T G.651 : Avg. 0.02 dB ITU-T G.653 : Avg. 0.08 dB ITU-T G.655 : Avg. 0.08 dB ITU-T G.657 : Avg. 0.05 dB SM FAST mode : Avg. 14 to 15 sec. SM AUTO mode : Avg. 19 to 20 sec. Heat-shrinkable sleeve Max. 66 mm Max. 6.0 mm before shrinking 40 mm FP-05 mode : Avg. 38 to 40 sec. 40 mm FP-04T mode : Avg. 17 to 19 sec. Single 60 mm mode: Avg. 13 to 15 sec. Approx. 2.0 N Approx. 1,500 splices Approx.170 mm without projection Approx.173 mm without projection Approx.150 mm without projection Approx. 2.6 kg including battery Operate : -10 to 50oC Storage : -40 to 80oC Operate : 0 to 95% RH non-condensing Storage : 0 to 95% RH non-condensing Max. 3,700 m AC100 to 240 V, 50/60 Hz, Max. 1.5 A Rechargeable Lithium Ion Approx. DC14.4V / 6,380 mAh Approx. 165 splice and heat cycles Recharge : 0 to 30oC Storage : -20 to 30oC Approx. 500 recharge cycles Approx. 5 8 hours from empty TFT 5 inches with touch screen Approx. 20X : 12 Ribbon to 60X : Single LED lamp USB2.0 Mini B type USB2.0 A type, Approx. DC5V, 500 mA Mini DIN 6 pin, DC12V, Max. 1A Bluetooth 4.1 LE 100 splice modes 30 heat modes 10,000 splices 100 images 1/4-20 UNC Splice mode select by fiber type analysis Discharge power calibration Wind protector : open/close Sheath clamp : open Heater lid : open/close Heater clamp : open/close Video and PDF file stored in splicer Replaceable without tool

AFLglobal.com | 800.235.3423

Specifications are subject to change without notice.

Ribbon Fiber Splicers

12R (with Cleaver for scale) Workstation in Transit Case Workstation on Transit Case

Fusion Splicing

Fujikura 12R Fusion Splicer
The Fujikura 12R is the world's smallest, lightest and most portable fusion splicer available today. Despite its incredibly small size, this ruggedized, full-featured unit offers unmatched versatility for splicing in the most challenging environments. The innovative transit case and work tray provide multiple options for the best utilization of available work space while the long life battery provides power for up to 100 splice cycles which include application of the splice protection sleeve.
The Fujikura 12R incorporates features typically found only in more expensive models. The large 4.5" monitor provides a crystal clear image, even in the brightest sunlight, for evaluating splice quality. The electrode life has been extended to 1,500 splices, minimizing downtime for replacement and stabilization. Software updates are accomplished via the internet allowing users to quickly update their software as new splice programs become available. The fully ruggedized chassis provides for shock, dust and moisture protection while the two camera observation system provides for accurate fiber alignment and loss estimation calculations. The Fujikura 12R is also fully compatible with the FUSEConnect® line of fusion installable connectors.
Backed by the best service team in the industry, the Fujikura 12R is the ideal splicer to use when portability, ruggedness, versatility and reliability are needed for your splicing application.

Features
· World's smallest splicer at 4.76"W x 6.38"D x 2.24"H · Fully ruggedized for shock, moisture and dust resistance · Transit case converts to easy to use workstation · Dual camera, fixed v-groove alignment technology · Extended life electrodes · Long life battery (100 splices/shrinks per charge)

Ordering Information

DESCRIPTION
Fujikura 12R Fusion Splicer Includes: ADC-19 AC Adapter, BTR-10 Battery Pack (installed), FH-70-4 Fiber Holders (Pair), ACC-09 Power Cord, ELCT2-12 Spare Electrodes (Pair), Operation Manual on CD, Quick Reference Guide, AP-01 Alcohol Container, SD01 Screwdriver and CC-29 Transit Case
Fujikura 12R Fusion Splicer Kit Includes: CT50 Cleaver, ADC-19 AC Adapter, BTR-10 Battery Pack (installed), FH-70-4 Fiber Holders (Pair) FH-70-250 Fiber Holders (Pair), FH-70-900 Fiber Holders (Pair), ACC-09 Power Cord, RS03 Thermal Stripper, ELCT2-12 Spare Electrodes (Pair), Operation Manual on CD, Quick Reference Guide, AP-01 Alcohol Container, SD01 Screwdriver and CC-29 Transit Case

AFL NO. S015571
S015667

Fujikura 12R Kit
AFLglobal.com | 800.235.3423

Specifications are subject to change without notice.

Ribbon Fiber Splicers

Fusion Splicing

Fujikura 12R Fusion Splicer

Recommended Accessories for the 12R

DESCRIPTION Cleavers & Strippers CT50 RS03 Thermal Stripper Fiber Holders FH-70-2 FH-70-4 FH-70-250 (250 m coated single fiber) FH-70-900 (900 m jacketed single fiber) FH-60-LT900 (900 µm loose buffer tube) FUSEConnectTM Accessories FH-FC-20 (900 µm within 2.0 mm sheathing) (each) FH-FC-30 (900 µm within 3.0 mm sheathing) (pair) FH-FC-900 (900 µm cable) (each) CLAMP-FC-2000 (pair) CLAMP-FC-3000 (pair)

AFL NO.
S017030 S016817
S017114 S017115 S017111 S017113 S015181
S014696 S014695 S014697 S014705 S014704

DESCRIPTION Batteries BTR-10 Battery Pack Miscellaneous Worktable Set TS-01 Tripod Screw ELCT2-12 Electrodes ADC-19 AC Adapter ACC-09 Power Cord AP-01 Alcohol Container SD-01 Screwdriver CC-29 Transit Case Splicer V-Groove Cleaning Kit

AFL NO.
S015527
S015817 S015895 S014028 S015523 S014390 S015525 S015526 S015524 S014397

Specifications
PARAMETER Model Applicable Fibers Fiber Count Cladding Diameter Coating Diameter Fiber Cleave Length Typical Average Splice Loss Splice Time Arc Calibration Method Splicing Modes Splice Loss Estimate Storage of Splice Result Fiber Display Magnification Viewing Method Operating Condition Mechanical Proof Test Tube Heater Tube Heater Time Protection Sleeve Length Splice/Heat with Battery Electrode Life Power Supply Terminals Wind Protection Dimensions Weight with Battery

VALUE Fujikura 12R Fusion Splicer Single-mode (G.652 & G.657), Multimode (G.651), DS (G.653), NZDS (G.655) Single to 4-fiber ribbon 125 m 250 m and 900 m 10 mm 0.05 dB (SM), 0.02 dB (MM), 0.08 dB (DS) and 0.08 dB (NZDS) Typical 20 sec with SM Automatic, real-time by using results of previous splice when in AUTO mode, manual arc calibration function available Total 100 splice modes Based upon dual camera cladding alignment data Last 2,000 splices 4.5 inch TFT color LCD with X or Y view or both X and Y view simultaneously 66X magnification in X or Y view; 33X magnification in X and Y view 2 axis CMOS camera 0 to 3,660 m above sea level (single fiber),0 to 95% RH non-dew, -10 to 50°C respectively 1.96 to 2.25 N 30 heating modes Typical 30 sec with FP-03 (60 mm) and FP-04 sleeves 60 mm, 40 mm, micro Typical 100 cycles with BTR-10 1,500 splices Auto select from 100V to 240V with AC adapter, 14.8 V DC with installed battery USB 2.0 Maximum wind velocity of 15 m/s. (34 mph) 121W x 162D x 57H (mm) / 4.76 W x 6.38 D x 2.24 H (inches) 776 g / 1.71 lbs.

AFLglobal.com | 800.235.3423

Specifications are subject to change without notice.

Fusion Splicing

Cleavers

Shown in CC-37 Carrying Case
Features · Motorized blade rotation · Bluetooth communication · Shock resistant · Simple one-step operation · 60,000 cleave blade life · Field serviceable
AFLglobal.com | 800.235.3423

CT50 Fiber Cleaver
The CT50 features automated blade rotation, unprecedented durability, and simplistic maintenance unseen with any other cleaver. Paired with a Bluetooth enabled Fujikura splicer, cleaver blade positions can be automatically advanced when needed based on cleave count or cleave quality. If automated rotation is not desired, the blade position can be advanced at the touch of a button, no tools required. The easy to read blade position indicator clearly displays the selected position. The Bluetooth® feature, along with simplified mechanical operation, increases overall productivity and reliability. The fiber clamp opens beyond 90 degrees and readies the blade for cleaving in the same motion. This allows easy viewing of the distance scale used to gauge cleave length. The 16-position blade yields 60,000 single-fiber cleaves, or 5,000 12-fiber ribbon cleaves. The built-in scrap collector conveniently stores fiber shards until they can be safely discarded.
The CT50 is an industry first cleaver ruggedized to withstand severe shock, including drops up to 30 inches. If needed, the CT50 is field serviceable with all precision components easily replaced in the field.

Specifications ITEM Applicable Fiber
Applicable Coating

Fiber type Fiber count Cladding dia. Fiber plate Fiber holder

Cleave Length

Fiber plate

Cleave Angle Blade Life
Physical description

Fiber holder Single fiber Fiber ribbon
Dimensions W Dimensions D Dimensions H Weight

Temperature Environmental condition

Humidity

Battery Wireless interface Screw hole for tripod

Other features

Blade rotation Replaceable parts

VALUE Single-mode optical fiber Multimode optical fiber Single up to 16 fibers Approx. 125 µm AD-10-M24 : Max. 900 µm coating diameter AD-50 : Max. 3mm coating diameter Coating shape. : Refer to splicer fiber holder options AD-10-M24 : 5 to 20 mm for CD 250 µm AD-50 [CD = coating diameter] CD= 250µm or less : 5 to 20 mm 250 µm < CD < 1000µm : 10 to 20 mm 1000 µm < CD < 3 mm : 14 to 20 mm Approx. 10 mm Avg. 0.3 to 0.9 degrees Avg. 0.3 to 1.2 degrees Approx. 60,000 fiber cleaves Approx. 120 mm when closing the lever Approx. 95 mm when closing the lever Approx. 58 mm when closing the lever Approx. 305 g including battery and AD-10-M24 Operate : -10 to 50oC Storage : -40 to 80oC Operate : 0 to 95% non-condensing Storage : 0 to 95% non-condensing 2 pieces of LR03/AAA dry battery Bluetooth 4.1 LE 1/4-20UNC Motorized rotation Manual rotation dial Blade Clamp arm

Continued >

Specifications are subject to change without notice.

Cleavers

CT50 Fiber Cleaver

Ordering Information

DESCRIPTION APPLICATION FIBER HANDLING SYSTEM

CLEAVE LENGTH

CT50

Single or

AD-10-M24 adapter plate for single See Specifications table

Ribbon Fiber fibers or fiber holders for ribbons on previous page

AFL NO. S017030

Accessories
DESCRIPTION CB-08 Replacement Blade FDB-05 Scrap Collector Box AD-50 Adapter Plate AD-10-M24 Fiber Plate ARM-CT50-01 Replacement Arm Set BRW-CT08-01 Blade Rotary Wheel SC-CT50-01 Side Cover CC-37 Transit Case SPA-CT-08-10 Spacer FDB-05 Fiber Dust Box
Splice+ is a smartphone application that works in cooperation with Fujikura's splicers, cleavers and ribbon fiber strippers which have Bluetooth capability.
Get the Splice+ app at the Apple App store or at Google Play.

AFL NO. S017076 S017121 S017010 S017335 S017122 S017110 S017108 S017077 S017011 S017121

Fusion Splicing

AFLglobal.com | 800.235.3423

Specifications are subject to change without notice.

Cleavers

Fusion Splicing

Shown in CC-34 Carrying Case

CT08 Fiber Cleaver
The CT08 cleaver is an extremely rugged, durable, and easy to use single fiber cleaver. Ideal for FTTH applications, the CT08 provides unmatched levels of impact resistance and also eliminates the requirement for tools during blade rotation. A thumbwheel on the bottom of the cleaver is utilized for blade rotation, and the blade position indicator has been relocated to enable quick and easy viewing. The top clamp opens to a position past vertical allowing for easy viewing, cleaning, and adjustment of the cleave length. The blade is retracted automatically when opening the top clamp and is activated upon closing, making this a true one-step cleaver. The cleaver blade and fiber clamping mechanism is extremely easy to replace in the field. A manual scrap collector is included.

Features · Dedicated for single fiber cleaving · Ruggedized design withstands extreme shock levels · Tool free blade rotation · Simple one-step operation · Blade and clamp/anvil assembly are field serviceable

Specifications ITEM Applicable Fiber
Applicable Coating

Fiber type
Fiber count Cladding dia. Fiber plate Fiber holder

Cleave Length

Fiber plate

Cleave Angle Blade Life
Physical description

Fiber holder Single fiber
Dimensions W Dimensions D Dimensions H Weight

Environmental condition Temperature

Humidity

Screw hole for tripod Other features

Blade rotation Replaceable parts

VALUE Single mode optical fiber Multi mode optical fiber Single fiber Approx. 125 µm AD-50 : Max. 3 mm coating diameter Coating shape. : Refer to splicer fiber holder options AD-50 [CD = coating diameter] CD= 250 µm or less : 5 to 20 mm 250 µm < CD < 1000 µm : 10 to 20 mm 1000 µm < CD < 3 mm : 14 to 20 mm Approx. 10mm Avg. 0.3 to 0.9 degrees Approx. 48,000 fiber cleaves Approx. 120 mm when closing the lever Approx. 95 mm when closing the lever Approx. 58 mm when closing the lever Approx. 185 g Operate : -10 to 50oC Storage : -40 to 80oC Operate : 0 to 95% non-condensing Storage : 0 to 95% non-condensing 1/4-20UNC Manual rotation dial Blade Clamp arm

AFLglobal.com | 800.235.3423

Specifications are subject to change without notice.

Cleavers

Fusion Splicing

CT08 Fiber Cleaver

Ordering Information
DESCRIPTION
CT08 Includes: AD-50 Adapter Plate, CC-34 Carrying Case, Hex Wrench, Scrap Collector and Instruction Manual

APPLICATION
Single Fibers: 160 to 900 µm coating, 125 µm cladding

Accessories
DESCRIPTION AD-50 Single Fiber Adapter Plate AD-10-M24 Fiber Plate SPA-CT08-10 Spacer CC-34 Transit Case CB-07 Replacement Blade for CT08 Cleaver ARM-CT08-01 Replacement Arm Set SC-CT08-01 Side Cover BRW-CT08-01 Blade Rotary Wheel FDB-04 Fiber Dust Box

AFL NO. S017010 S017335 S017011 S017012 S017013 S017014 S017015 S017110 S017120

FIBER HANDLING SYSTEM
Purchased separately FH-70-250 FH-70-900

CLEAVE LENGTH
See Specifications Table on previous page

AFL NO. S017004

AFLglobal.com | 800.235.3423

Specifications are subject to change without notice.

Strippers

Fusion Splicing

RS01
RS02
RS03
RS03-80
Features · 3 Second heating time with
beep and LED notification · Low pulling force needed for stripping · Stripping capability for 200 m coated
fibers and ribbons · Ergonomic design · Bluetooth capable for wireless
connection with smartphones (RS02, RS03 and RS03-80) · High capacity battery provides approximately 600 stripping cycles (RS03 and RS03-80)

Thermal Strippers
The RS01, RS02, RS03 and RS03-80 Thermal Strippers provide superior stripping performance for both single and multi-fiber stripping. The fast heating time of 3 seconds speeds productivity. The ergonomic design, combined with the low level of force needed for stripping, makes the RS series comfortable and easy to use for high fiber count applications. The strippers are also capable of stripping 200 m coated fibers and ribbons. An audible beep and illuminated LED signal indicate that the proper heating temperature has been reached. A temperature selection switch permits easy field optimization for different fibers or operating conditions. These strippers accept all Fujikura field and factory style fiber holders.
Bluetooth® capabilities on the RS02 and RS03 models provide a convenient way to program the stripper for user preferences via an Android or iOS smartphone app. The RS03 model includes a powerful Lithium-Ion battery that delivers enough power for 600 stripping cycles. The RS03-80 is offered for stripping 80 m cladding fiber applications.
For those situations and locations where Bluetooth-enabled devices are not permitted, the RS01 model is available with all of the features of the RS02 model but without the Bluetooth technology.

Ordering Information
DESCRIPTION Strippers RS01 Thermal Stripper Includes: RS01 Thermal Stripper, DCC-11 and Instruction manual RS02 Thermal Stripper Includes: RS02 Thermal Stripper, DCC-11, HEX-01 Hex Wrench, BRS-02 Brush and Instruction manual RS03 Thermal Stripper Includes: RS03 Thermal Stripper, BTR-12 Battery Pack, ADC-09A AC Adapter for RS Series Thermal Strippers, ACC-02 AC Power Cord (for ADC-09A), HEX-01 Hex Wrench, BRS-02 Brush and Instruction manual RS03-80 Thermal Stripper Includes: RS03-80 Thermal Stripper, BTR-12 Battery Pack, ADC-09A AC Adapter for RS Series Thermal Strippers, ACC-02 AC Power Cord (for ADC-09A), HEX-01 Hex Wrench, BRS-02 Brush and Instruction manual POWER SUPPLY ADC-09A AC Adapter (RS01/RS02/RS03) ACC-09 Power cord BTR-12 Battery (RS03) Miscellaneous SPA-RS02-08 SPACER

AFL NO. S016815 S016816
S016817
S016842
S016820 S014390 S016832 S016818

AFLglobal.com | 800.235.3423

Specifications are subject to change without notice.

Strippers

Fusion Splicing

Thermal Strippers

Specifications
MODEL Applicable optical fiber Fiber count Cladding diameter Coating diameter Stripping length Typical heating time
Heating temperature Fiber holder Wireless connectivity Dimensions Weight Power supply
Battery capacity Recharge Time Battery Life Operating conditions Storage conditions

RS01

RS02

RS03

RS03-80

Glass optical fibers, capillary

1 to 16

Single

125 m

80 m

200 to 400 m

150 to 250 m

Up to 35 mm

3 sec. 5 sec. at Eco mode

85° - 140°C

All FH-40, FH-50, FH-60, FH-70, and FH-100 series fiber holders (except FH-50-250 and FH-50-900)

N/A

Bluetooth®4.1 LE*1 OS:Android 5.0 or above , iOS 8.0 or above (iPhone6 or above)

155.5 (W) × 48.7 (D) × 32.5 (H) mm

155.5 (W) × 48.7 (D) × 36.8 (H) mm

185 g

265 g (with Battery)

AC Adaptor Input: 100 to 240V, 50/60 Hz, Max 0.58 A Output: Approx. DC 12 V, Max 2A DC External Supply: DC10 to 17V, Max 1A

AC Adaptor Input: 100 to 240V, 50/60 Hz, Max 0.58 A Output: Approx. DC 12 V, Max 2 A DC External Supply: DC10 to 17 V, Max 1 A BTR-12 Battery: DC7.2 V, 1840 mAh (Rechargeable Lithium Ion)

N/A

Approx. 600 strips with Eco mode

Approx. 2 hr from empty

Approx. 500 recharge cycles

Temperature: -10 to 50°C, Humidity: 0 to 95% RH (Non-condensing)

Temperature: -20 to 60°C, Humidity: 0 to 95% RH (Non-condensing)

AFLglobal.com | 800.235.3423

Specifications are subject to change without notice.

Splice Protection

Fusion Splicing

Splice Protection Sleeves
AFL offers a wide selection of fiber protection sleeves to meet any application. The FP series is the industry standard for durable and lasting protection of single fiber splices in field installations, while the FP-04(T) and FP-05 provide the same durable protection for 8 and 12 fiber ribbon respectively.
The FPS01 and FPS04 series are specially designed for optical components, where small packaging is a priority. These micro sleeves provide the known reliability of Fujikura sleeves in the smallest possible lengths. This easy and cost effective method is a great alternative to recoating. The FPS01 and FPS04 series offer a wide range of options to accommodate various coating sizes, and are manufactured in a variety of lengths. This gives great flexibility in designing optical modules.

Standard Sleeves: Dimensions & Applicable Fiber

SLEEVES FOR SINGLE FIBERS 250 MICRONS TO 900 MICRONS

DESCRIPTION FP-60 FP-40

SLEEVE LENGTH 60 mm 40 mm

FIBER CLEAVE LENGTH 16 mm 10 mm

SLEEVE DIAMETER AFTER SHRINK 3.1 mm (max.) 3.1 mm (max.)

PACKAGING

AFL NO.

1000 Box/100 Pack S015915

1000 Box/100 Pack S015916

SLEEVES FOR UP TO 250 MICRON COATED RIBBON

DESCRIPTION FP-04(T) FP-05 FP-05-28 FPS04-30 FPS08-28 FPS24-40

FIBER COUNT Up to 8 fibers Up to 12 fibers Up to 12 fibers Up to 4 fibers Up to 8 fibers Up to 24 fibers

SLEEVE LENGTH 40 mm 40 mm 28 mm 30 mm 28 mm 40 mm

FIBER CLEAVE LENGTH 10 mm 10 mm 10 mm 10 mm 10 mm 10 mm

SLEEVE DIAMETER AFTER SHRINK 4.0 mm (max.) 4.5 X 4.0 mm (max.) 4.5 mm (max.) 2.4 mm (max.) 3.3 X 2.7 mm (max.) 8.0 X 4.0 mm (max.)

PACKAGING 250 Box/25 Pack 250 Box/5 Pack 250 Box/25 Pack 1,000 Box/25 Pack 500 Box/25 Pack 200 Box/5 Pack

AFL NO. S002105 S003027 S014720 S010848 S013560 S013004

Specifications PARAMETER Outer tube Inner Tube Strength member Operation condition (after shrink) Storage condition (before shrink)

DESCRIPTION FP-60/40/03 series FPS-04(T) / FP-05 ALL FP-60/40/03 series FP-04(T) / FP-05

VALUE Polyolefin based on Polyethylene Ethylene-Vinyl Acetate Ethylene-Vinyl Acetate Stainless steel Heat-resistant glass -10 to 50°C, 0 to 95% RH (Non dew) -40 to 60°C, Non dew

Outer Tube (Heat-shrinkable) Inner Tube (Hot-melt Glue)
Strength Member Outer Tube (Heat-shrinkable) Inner Tube (Hot-melt Glue)
Strength Member
AFLglobal.com | 800.235.3423 20

FP-03 series FPS01 series
FP-04(T)/05 FPS04-30 FPS08-28
© 2002, AFL, all rights reserved. PP-4-00051, Revision 7, 2.10.20 Specifications are subject to change without notice.

Splice Protection

Fusion Splicing

Splice Protection Sleeves

Micro Sleeves: Dimensions & Applicable Fiber

FPS01-400 SERIES FOR SINGLE FIBERS UP TO 400 MICRON FIBER

DESCRIPTION FPS01-400-12 FPS01-400-15 FPS01-400-20 FPS01-400-25 FPS01-400-34 FPS01-400-40

SLEEVE LENGTH 12 mm 15 mm 20 mm 25 mm 34 mm 40 mm

FIBER CLEAVE LENGTH 4 mm 5 mm 8 mm 10 mm 15 mm 16 mm

SLEEVE DIAMETER AFTER SHRINK 1.5 mm 1.5 mm 1.5 mm 1.5 mm 1.5 mm 1.5 mm

PACKAGING 50 Pack 50 Pack 50 Pack 50 Pack 50 Pack 1,250 Box

AFL NO. S014088 S012668 S012672 S012676 S012680 S011914

FPS01-900 SERIES FOR SINGLE FIBERS UP TO 900 MICRON FIBER

DESCRIPTION FPS01-900-15 FPS01-900-20 FPS01-900-25 FPS01-900-34 FPS01-900-45

SLEEVE LENGTH 15 mm 20 mm 25 mm 34 mm 45 mm

FIBER CLEAVE LENGTH SLEEVE DIAMETER AFTER SHRINK

4 mm

2.3 mm

6 mm

2.3 mm

6 mm

2.3 mm

13 mm

2.3 mm

16 mm

2.3 mm

PACKAGING 50 Pack 50 Pack 50 Pack 50 Pack 50 Pack

AFL NO. S012684 S012688 S011954 S012692 S012696

Specifications
PARAMETER Outer tube Inner Tube
Strength member
Operation condition (after shrink) Storage condition (before shrink)

DESCRIPTION FPS01 series / FPS04-30 / FPS08-28 / FPS24-40 ALL FPS01 series FPS04-30 / FPS08-28 / FPS24-40

VALUE Polyolefin based on Polyethylene Ethylene-Vinyl Acetate Stainless steel Heat-resistant glass -10 to 50°C, 0 to 95% RH (Non dew) -40 to 60°C, Non dew

Type Variations

AFLglobal.com | 800.235.3423

FULL SCALE

Specifications are subject to change without notice.

Ribbon Fiber Tools

RT-02 RT-02 with FH-70-12PC

Fusion Splicing

RT-02 Ribbonizing Tool
The RT-02 is the latest ribbonizing tool from Fujikura, and the first universal ribbonizing tool on the market suitable for forming a temporary ribbon from loose 200 µm or 250 µm fibers. This is also the first tool that features a glue-less process for ribbonizing and splicing 12 fiber ribbons. This saves time and money by eliminating operating inefficiencies such as cure time and contamination of splicing equipment. Simply choose the applicable fiber holder in conjunction with the RT-02 to ribbonize 200 µm or 250 µm fibers. With this tool, you can now realize the benefits of mass fusion splicing when installing the latest generation of loose fiber micro cables.

Features
· No glue required · 200 µm and 250 µm compatible · Loading with color code sequence
not required · Fibers load directly into fiber holder · Left and right fiber holder color codes
printed on tool

Applications
· Ribbonizing 200 µm and 250 µm loose fibers · 200 µm and 250 µm MPO termination · Mass fusion splicing loose fiber cables

Ordering Information
DESCRIPTION RT-02 (tool only) FH-70-12PC (pair of pitch conversion holders for 200 µm loose fibers) FH-70-12 (pair standard 12F ribbon holders)

AFL NO. S017465 S017464 S017119

AFLglobal.com | 800.235.3423

Specifications are subject to change without notice.

Ribbon Fiber Tools

Fusion Splicing

FST-12 Fiber Separation Tool
The FST-12 Fiber Separation Tool is used to quickly, accurately and reliably split ribbons into sub-groups or individual fibers. The ergonomic FST-12 design enables safe and reliable, one-handed operation for use in diverse fiber deployment environments, such as aerial and remote-site applications.
Features and Benefits · Enables separation of groups of fibers or single fibers and is not limited to only
even-numbered groupings. · One-handed operation allows the operator's other hand to guide and control the ribbon
at all times, minimizing the potential for accidental damage to the fibers or ribbon. · Hand-held method eliminates the need to utilize valuable work surface space
for operation and is the ideal solution for remote-site and aerial operations such as bucket truck or ladder-sling applications. · Performing two overlapping separations of the ribbon allows any single fiber or any sub-group of fibers to be extracted from the ribbon, even in mid-span taut-sheath operations where minimal ribbon length is available. · Standard tool designed for fiber counts up to 12-fiber ribbon.

Specifications
PARAMETER Ribbon Thickness Ribbon Width Fiber Pitch Fiber Coating Material Separation Ratios: 12-fiber Ribbon Environmental Conditions: Operating Temperature
Storage Temperature Dimensions
Weight

VALUE 250 to 360 micron 3.2 mm (12-fiber) 250 micron UV cured resin 1:11, 2:10, 3:9, 4:8, 5:7, 6:6 -10° to 50°C, 0 to 95% RH (non-dew) -40° to +80°C, 0 to 95% RH (non-dew) 160L x 126W x 30H (mm) 6.30L x 4.96 x 1.18 (in) 220 g / 7.76 oz.

Ordering Information
DESCRIPTION FST-12 Fiber Separation Tool Includes: 12-fiber ribbon jaw set, instructional manual and color coded quick reference guide

AFL NO. S014012

AFLglobal.com | 800.235.3423

Specifications are subject to change without notice.

Ribbon Fiber Tools

Fusion Splicing

FAT-04

Fiber Arrangement Tool
The FAT-04 features an easy-to-use fiber arrangement method utilizing linear travel. The FAT-04 includes a spare paste applicator to allow ribbon making to continue even if one of the paste applicators needs cleaning.

Ordering Information

DESCRIPTION FAT-04 Fiber Arrangement Tool* SP-1 Foam Pads for FAT-04 (One set = 5 sheets of 25 pads each) Paste Applicator Blocks for FAT-04 (2 pieces)

AFL NO. S010212 S009016
S010952

* F AT-04 includes 4 oz. FAA-03A ribbon forming adhesive, paste applicator blocks, cleaning swabs, CL-02 clips and SP-1 foam pads

FAA-03A

Ribbon Forming Adhesive
A key advantage of our fiber arrangement tool is the use of the ribbon forming adhesive. Ribbons formed with this adhesive have excellent stripability, especially compared to ribbonizing methods using tape. Unlike tape methods, the paste does not "gum-up" the stripping tool and cause broken fibers. The paste holds the stripped coating residue into a single piece of debris that is easily cleaned from the stripper. If needed, the ribbon can be easily separated into individual fibers using alcohol.

Ordering Information
DESCRIPTION FAA-03A ribbon-forming adhesive (0.5 liter bottle) FAA-03A ribbon-forming adhesive (4 oz. dispensing bottle)

AFL NO. S008622 S008720

AFLglobal.com | 800.235.3423

Specifications are subject to change without notice.

Cleaning

Fusion Splicing

Splicer V-groove Cleaning Refill Kit

Splicer V-groove Cleaning Kit
Today's splicing equipment is fast, efficient, and requires minimal maintenance due to advances in splicing technology. However, contamination in the V-groove of the splicer is still a primary source of trouble for the splicing technician. This is especially problematic when splicing with a fixed V-groove fusion splicer. Environmental contamination, such as dust, dirt and fiber coating debris, as well as the silica deposits generated during the fusion process eventually find their way to the surface of the v-groove. This contamination will offset the fibers and degrade performance. To help control this problem, a disciplined cleaning regimen and specific tooling is required to ensure the splice is right the first time.
To solve cleaning needs, AFL offers the Splicer V-groove Cleaning Kit. This product integrates eight components into an affordable and effective inspection and cleaning solution for any fusion splicer. Small and lightweight, it fits easily into the Fujikura splicer transit case or it can be carried separately in its own carrying case.

Kit Includes
· Scrubber Brush with stiff tapered nylon bristles
· Sweeper Brush with soft nylon bristles · Eye Loupe with 3X to 12X magnification · LED Pen Light with momentary or
constant on switching

· Cleaning Fluid that is nonflammable and environmentally safe
· Lint-free Cotton Swabs · Instruction Sheet with illustrations · Canvas Carrying Case

Refill Kit Includes
To replenish the consumables within the kit, AFL provides a refill kit that includes the following components:
· One can of FCC2 Cleaning Fluid · One Scrubber Brush · One Sweeper Brush · Ten packs CS-1 Cotton Swabs (250 swabs)

Ordering Information
DESCRIPTION Splicer V-groove Cleaning Kit Splicer V-groove Cleaning Refill Kit CS-1 Cotton Swabs (pack of 25 swabs)

AFL NO. S014397 S014416 S003719

CS-1 Cotton Swabs

AFLglobal.com | 800.235.3423

Specifications are subject to change without notice.

Misc. Accessories

Fusion Splicing

Portable Tripod Workstation Kit (splicer and cleaver not included)

Cleaver mount assembly swings into and out of the work space

Portable Work Tray showing the four mounting positions of the cleaver mount assembly (delivered as shown)

Portable Tripod Workstation
As splicing requirements have migrated from aerial to ground level locations, a sturdy splicing workstation with the ability to adjust for uneven ground surfaces has been missing from the splicing marketplace. That problem is solved with AFL's Portable Tripod Workstation the critical missing link in splicing productivity.
The Portable Tripod Workstation offers both a sturdy work tray to support the splicer, cleaver and accessories, and a tripod to support the work tray. The two can be purchased together as a kit or separately for those users who prefer to use their own tripod or mounting mechanism.
The work tray incorporates a unique cleaver mounting system that offers flexibility and convenience for the user. The cleaver mounting arm pivots into and out of the work space, as needed, and securely captures the CT50, CT-20 and CT-04 style cleavers. The base of the cleaver mounting assembly can be moved to any one of four positions on the tray to accommodate user preferences.
The tripod is solidly constructed but lightweight, weighing less than six pounds, and collapses to a length of only twenty-five inches. The telescoping legs offer flexible height adjustments from thirteen inches to sixty-one inches and the leg angle can be increased for unusual surfaces.

Features
· Sturdy work tray supports the splicer, cleaver and accessories · Tripod supports a load capacity of up to eleven pounds · Independent telescoping tripod legs support uneven work surfaces · Leveraged handles securely lock work tray into position · Cleaver mount assembly swings cleaver into and out of the work space · Optional cleaver mounting positions accommodate user preferences · Compatible with all FSM-17, FSM-18, FSM-50, FSM-60 and 12/19/70 series models

Ordering Information
DESCRIPTION Portable Tripod Workstation Kit Includes: Tripod with pan head and quick release platform (make and model of tripod may change without notice), portable work tray with cleaver mount assembly and canvas carrying case Portable Work Tray Includes: Portable work tray with cleaver mount assembly and canvas carrying case Tripod Includes: Tripod with pan head and quick release platform (make and model of tripod may change without notice)

AFL NO. S014773
S014753 S014751

Optional Accessories
DESCRIPTION TS-01 TRIPOD SCREW (required for 12S & 12R models)

AFL NO. S015895

AFLglobal.com | 800.235.3423

Specifications are subject to change without notice.

Misc. Accessories

Fusion Splicing

Splicing Workstation

Aerial mounting system

Pole Straps

Cleaver mount

Tray assembly

Pole Straps
Pole Mounting System
*Illustration for reference only.

Safety Straps

Mounting clamp

ASW-02 Splicing Workstation
The ASW-02 Splicing Workstation can be used with a fusion splicer and cleaver in aerial or terrestrial splicing applications. The ASW-02 provides a stable work surface and secure mounting of the splicer and cleaver to prevent accidental drops and equipment damage in challenging splicing locations.
The ASW-02 Splicing Workstation consists of the work tray, a convenient pivoting cleaver mounting arm, a post for attachment to bucket or ladder mounting accessories, a tripod mount, and dual safety straps. An aerial mounting system is available for direct attachment of the workstation to a telephone pole, or for suspending the workstation from an aerial cable strand. The strand mounting system is fully adjustable to provide for optimal location of the workstation when minimal slack fiber is available, such as in a taut-sheath cable access scenario.
In the aerial environment, the safety straps may be secured to the cable strand to provide security and aid with workstation position adjustment. The safety straps are also used to secure the workstation to the pole, and may be used to raise or lower the workstation.

Features
· Provides direct to pole mounting as well as direct adjustable attachment to aerial strand · Mounting post provided for attachment to bucket and ladder mounting accessories
(utilizing any popular copper splicer-head mounting rigs) · Tripod mount allows for placement in tight FTTH splicing applications · Includes cable tie locations to secure cables during splicing · Optimized to simplify taut sheath splicing applications · Cleaver mount securely captures cleaver and allows operator to rotate
it in and out of the workspace as needed · Matte finish minimizes glare · Compatible with all FSM-17, FSM-18, FSM-50, FSM-60 and 19/70 series models

Ordering Information
DESCRIPTION ASW-02 Splicing Workstation (Full kit with aerial mounting system) Includes aerial mounting system to provide strand and pole mounting capability, a post for attachment to bucket or ladder mount accessories and a receptacle for tripod mounting and safety straps ASW-02 Splicing Workstation (Without aerial mounting system) Includes a post for attachment to bucket or ladder mount accessories and a receptacle for tripod mounting

AFL NO. S010532
S013620

Cleaver mount Tray assembly
Aerial Mounting System
*Illustration for reference only.
AFLglobal.com | 800.235.3423

Specifications are subject to change without notice.

Misc. Accessories

Fusion Splicing

TJ-03 Temporary Joining Tool
The TJ-03 is a temporary mechanical fiber splice for fiber and cable connections to test equipment such as OTDRs or fiber optic cable reels. The TJ-03 uses a precision ceramic V-groove to align up to 12 fibers simultaneously. The fibers are prepared for joining by using standard mass fusion fiber preparation tools (fiber holders, thermal stripper, and cleaver.) Using the TJ-03 in conjunction with an OTDR equipped with an optical switch provides rapid one button optical tests of 12 fibers.

Features
· Precision ceramic V-groove alignment · Built-in magnifier and lamp to inspect fiber placement in V-grooves

Ordering Information
DESCRIPTION TJ-03 Temporary Splice Kit Includes: Fiber Holders (1 pair) FH-50-12N, CT50 Cleaver, RS02 Thermal Stripper, ADC-09A AC Adapter for RS02 and the ACC-09 Power Cord TJ-03 Temporary Splice (without fiber preparation tools)

AFL NO. S012772
S010456

AFLglobal.com | 800.235.3423

Specifications are subject to change without notice.

FUSION SPLICING

Laser Splicing Systems

Ablated Fiber Surface Splice Point
Coreless Ball Lens to Collimate SMF Fiber

LZM-125A+ Splicing System
The LAZERMaster LZM-125A+ is a splicing and glass processing system that uses a CO2 laser heat source to perform splicing, tapering (to create MFAs), lensing, or other glass shaping operations with glass diameters of 2.0 mm or less. The high-resolution optical analysis system works in conjunction with on-board firmware for fully automatic splicing, tapering and other glass shaping processes.
High precision glass processing is enabled by the intuitive and user- friendly on-board firmware (virtually identical to that of the Fujikura FSM-100 splicers). Operations may also be performed manually and by PC control. The FPS PC control GUI is supplied with the LZM-125A+ to provide additional features, greater flexibility, and finer control. The FSP GUI may be used on a PC chosen by the customer. Customers can also create proprietary PC control algorithms using a complete set of PC control commands.

Features
· Fiber Ablation that can be used for cleaving, shaping, or custom mode stripping · Splices and glass processing of fibers with 80 µm up to 2.0 mm diameter · High resolution motion for precise control during splicing and glass processing operations · Extensive library of applications which are transferable between the LZM and FSM family · FPS PC GUI provides additional measurement capabilities and glass shaping control · Clean modular laser heat source: Absolutely no deposits on fiber surface as might occur with
filaments or electrodes. · Substantially reduces maintenance and calibration requirements · Proprietary feedback system ensures heating power stability · No need for external process gas (as required with filament systems) or Vacuum systems · Class 1 System with redundant automated laser safety features · Motorized mirrors to automatically adjust the beam path

Ordering Information

DESCRIPTION

AFL NO.

LAZERMaster LZM-125A+ Glass Processing and Splicing System

S017800

(Standard baseline LZM-125 system. Includes AC adapters and cords and FPS PC software.)

Optional Tablet PC (includes FPS software pre-installed) (recommended)

S016772

LZM Training (Optional US based at customer locations)

S015867

LZM Training (Optional International)

S015868

Splicer V-groove Cleaning Kit

S014397

Ablated Fiber Surface

AFLglobal.com | 800.235.3423

continued

Specifications are subject to change without notice.

FUSION SPLICING

Laser Splicing Systems

LZM-125A+ Splicing System

Specifications

PARAMETER Fiber Heating and Splicing Method

CO2 LASER 30 W standard

CO2 Laser Power Laser Safety Features

Metal cover with multiple interlocks, class 1 enclosure, automatic actuation of shutter, automatic laser power cutoff Proprietary feedback system assures laser beam power stability

Laser Beam Control

Standard beam size is 4.5 mm X 2 mm and a minimum spot of 30 µm for ablations)

Typical Splice Loss

0.02 dB for SMF (ITU-T G.652)

Typical Splice Strength

100 kpsi for SMF (ITU-T G.652) using appropriate fiber preparation equipment

Camera Field of View

2.3 mm

Fiber Observation Methods

PAS (Profile Alignment System) via transverse fiber observation WSI (Warm Splice Image) and WTI (Warm Taper Image) End-view observation

Applicable Fiber Diameter

End-view observation

V-Groove Clamping System

80 µm to 2000 µm for automatic alignment by PAS Larger diameter endcaps may be aligned manually

Fiber Handling

Infinitely variable from 80 µm up to 2000 µm Clamping bare fiber or fiber coating in the "split V-groove" system

Alignment Methods

· PAS (Profile Alignment System, automatic alignment by camera observation) · Manual · PC control with Power Meter feedback via GPIB/USB · End-view

Endless Theta Rotation

360º endless rotation, angle resolution 0.1º

X/Y Alignment Resolution

Sub-micron

Maximum Z Travel Length

18 mm (both left and right Z units) as well as sweep with a total of 36 mm

Z Travel Resolution

0.125 µm theoretical

Maximum Taper Length

32 mm

Maximum Taper Ratio

10:1 standard (For uniform direction, one-pass tapering) Dual direction tapering offers greatly increased taper ratios, as does tapering with more than one tapering pass.

Maximum Taper Speed

1 mm/sec standard

Splicing Control

Internal firmware or operation by PC

Fiber Tapering and Glass Shaping Control Internal firmware or operation by PC

PC Control

FPS software will be provided Complete command set for PC control

PC Option

Optional Tablet PC (includes FPS software pre-installed). Use of the FPS software on a PC provides finer control and additional features compared to the LZM-110 internal firmware

Interface Ports

USB 2.0 (For PC communications, data and image download, etc.) GPIB/USB (for power meter feedback)

Electrical Power

100-240 VAC

Operating Conditions / Storage Conditions 10 to 40°C / 5 to 60°C

Rotation Motors

For LZM-125A+, theta rotational motion is available for PM fiber alignment.

PM Fiber Alignment Methods

· PAS (For PANDA and other PM fibers) · IPA (Interrelation Profile Alignment, applicable to almost all PM fibers. Three distinct IPA methods available.) · End-view · Power meter feedback (Requires polarizer and analyzer, as well as GPIB interface) · Manual · Other methods by PC control

End-View Observation and Alignment Internal end-view system

Flexibility for Customer Design Input

Customizable platform

AFLglobal.com | 800.235.3423

Specifications are subject to change without notice.

Laser Splicing Systems

FUSION SPLICING

Splice Point Coreless Ball Lens to Collimate SMF Fiber
Tapered Probe with Small Ball End

LZM-125M/LZM-125P Splicing System
The LAZERMaster LZM-125M/LZM-125P is a splicing and glass processing system that uses a CO2 laser heat source to perform splicing, tapering (to create MFAs), lensing, or other glass shaping operations with glass diameters of 2.0 mm or less. The high-resolution optical analysis system works in conjunction with on-board firmware for fully automatic splicing, tapering and other glass shaping processes.
High precision glass processing is enabled by the intuitive and user- friendly on-board firmware (virtually identical to that of the Fujikura FSM-100 splicers). Operations may also be performed manually and by PC control. The FPS PC control GUI is supplied with theLZM-125M/LZM-125P to provide additional features, greater flexibility, and finer control. The FSP GUI may be used on a PC chosen by the customer. Customers can also create proprietary PC control algorithms using a complete set of PC control commands.

Features
· Splices and glass processing of fibers with 80 µm up to 2.0 mm diameter · High resolution motion for precise control during splicing and glass processing operations · Extensive library of applications which are transferable between the LZM and FSM family · FPS PC GUI provides additional measurement capabilities and glass shaping control · Clean modular laser heat source: Absolutely no deposits on fiber surface as might occur with
filaments or electrodes. · Substantially reduces maintenance and calibration requirements · Proprietary feedback system ensures heating power stability · No need for external process gas (as required with filament systems) or Vacuum systems · Class 1 System with redundant automated laser safety features · Motorized mirrors to automatically adjust the beam path

Ordering Information
DESCRIPTION LAZERMaster LZM-125M Glass Processing and Splicing System (Standard baseline LZM-125 system. Includes AC adapters, cords and FPS PC software) LAZERMaster LZM-125P Glass Processing and Splicing System (Standard baseline LZM-125 system. Includes AC adapters, cords and FPS PC software)
Optional Tablet PC (includes FPS software pre-installed) (recommended)

AFL NO. S017801 S017803
S016772

AFLglobal.com | 800.235.3423

continued

Specifications are subject to change without notice.

FUSION SPLICING

Laser Splicing Systems

LZM-125M/LZM-125P Splicing System

Specifications

PARAMETER Fiber Heating and Splicing Method CO2 Laser Power Laser Safety Features Laser Beam Control Typical Splice Loss Typical Splice Strength Camera Field of View Fiber Observation Methods
Applicable Fiber Diameter
V-groove Clamping System
Fiber Handling Alignment Methods
Endless Theta Rotation X/Y Alignment Resolution Maximum Z Travel Length Z Travel Resolution Maximum Taper Length Maximum Taper Ratio
Maximum Taper Speed Splicing Control Fiber Tapering and Glass Shaping Control PC Control PC Option
Interface Ports
Electrical Power Operating/Storage Conditions Rotation Motors PM Fiber Alignment Methods
Flexibility for Customer Design Input

VALUE
CO2 Laser
30 W standard
Metal cover with multiple interlocks, class 1 enclosure, automatic actuation of safety shutter, automatic laser power cutoff
Proprietary feedback system assures laser beam power stability
0.02 dB for SMF (ITU-T G.652)
100 kpsi for SMF (ITU-T G.652) using appropriate fiber preparation equipment
2.3 mm
PAS (Profile Alignment System) via transverse fiber observation WSI (Warm Splice Image) and WTI (Warm Taper Image)
80 µm to 2000 µm for automatic alignment by PAS Larger diameter endcaps may be aligned manually
Infinitely variable from 80 µm up to 2000 µm Clamping bare fiber or fiber coating Patented "split V-groove" system
Fujikura FSM-100, FSM-45, and FSM-40 splicer fiber holders
3 methods for PM alignment: · PAS (Profile Alignment System, automatic alignment by camera observation) Manual · Other methods by PC control · Power meter feedback via GPIB
360º endless rotation for 125P model, angle resolution 0.1º
0.1 µm
5 mm (both left and right Z units) as well as sweep with a total of 10 mm
0.125 m theoretical
8 mm
10:1 standard (For uniform direction, one-pass tapering) Dual direction tapering offers greatly increased taper ratios, as does tapering with more than one tapering pass.
1 mm/sec standard
Internal firmware or operation by PC
Internal firmware or operation by PC
FPS software will be provided complete command set for PC control
Tablet computer is available as an option. Use of the FPS software on a PC provides finer control and additional features compared to the LZM-125 internal firmware.
USB 2.0 (For PC communications, data and image download, etc.) GPIB (for power meter feedback)
100-240 VAC
10 to 40°C / 5 to 60°C
Optional (Provides theta rotational motion for PM fiber alignment in the LZM-125P model)
· PAS (For PANDA and other PM fibers) · IPA (Interrelation Profile Alignment, applicable to almost all PM fibers. Three distinct IPA methods available.) · Power meter feedback (Requires polarizer and analyzer, as well as GPIB interface) · Manual · Other methods by PC control
Customizable platform

AFLglobal.com | 800.235.3423

Specifications are subject to change without notice.

Laser Splicing Systems

FUSION SPLICING

Coreless Ball Lens to Collimate SMF Fiber Splice Point
Coreless Ball Lens to Collimate SMF Fiber

LZM-125M+/LZM-125P+ Splicing System
The LAZERMaster LZM-125M+/LZM-125P+ is a splicing and glass processing system that uses a CO2 laser heat source to perform splicing, tapering (to create MFAs), lensing, or other glass shaping operations with glass diameters of 2.0 mm or less. The high-resolution optical analysis system works in conjunction with on-board firmware for fully automatic splicing, tapering and other glass shaping processes.
High precision glass processing is enabled by the intuitive and user- friendly on-board firmware (virtually identical to that of the Fujikura FSM-100 splicers). Operations may also be performed manually and by PC control. The FPS PC control GUI is supplied with the LZM-125M+/LZM-125P+ to provide additional features, greater flexibility, and finer control. The FSP GUI may be used on a PC chosen by the customer. Customers can also create proprietary PC control algorithms using a complete set of PC control commands.

Ordering Information
DESCRIPTION LAZERMaster LZM-125M+ Glass Processing and Splicing System (Standard baseline LZM-125 system. Includes AC adapters, cords and FPS PC software) LAZERMaster LZM-125P+ Glass Processing and Splicing System (Standard baseline LZM-125 system. Includes AC adapters, cords and FPS PC software)
Optional Tablet PC (includes FPS software pre-installed) (recommended)

AFL NO. S017802 S017804
S016772

Tapered Probe with Small Ball End
AFLglobal.com | 800.235.3423

continued

Specifications are subject to change without notice.

FUSION SPLICING

Laser Splicing Systems

LZM-125M+/LZM-125P+ Splicing System

Specifications

PARAMETER Fiber Heating and Splicing Method CO2 Laser Power Laser Safety Features Laser Beam Control Typical Splice Loss Typical Splice Strength Camera Field of View Fiber Observation Methods
Applicable Fiber Diameter V-groove Clamping System
Fiber Handling Alignment Methods
Endless Theta Rotation X/Y Alignment Resolution Maximum Z Travel Length Z Travel Resolution Maximum Taper Length Maximum Taper Ratio
Maximum Taper Speed Splicing Control Fiber Tapering and Glass Shaping Control PC Control PC Option
Interface Ports
Electrical Power Operating/Storage Conditions Rotation Motors
PM Fiber Alignment Methods
End-View Observation and Alignment Flexibility for Customer Design Input

VALUE
CO2 Laser
30 W standard
Metal cover with multiple interlocks, class 1 enclosure, automatic actuation of shutter, automatic laser power cutoff
Proprietary feedback system assures laser beam power stability
0.02 dB for SMF (ITU-T G.652)
100 kpsi for SMF (ITU-T G.652) using appropriate fiber preparation equipment
2.3 mm
PAS (Profile Alignment System) via transverse fiber observation WSI (Warm Splice Image) and WTI (Warm Taper Image) End-view observation
80 µm to 2000 µm for automatic alignment by PAS; Larger diameter endcaps may be aligned manually
Infinitely variable from 80 m up to 2000 m Clamping bare fiber or fiber coating Patented "split V-groove" system
Fujikura FSM-100, FSM-45, and FSM-40 splicer fiber holders
4 methods for PM alignment: · PAS (Profile Alignment System, automatic alignment by camera observation) Manual · Other methods by PC control · Power meter feedback via GPIB · End-view
360º endless rotation for 125P+ model, angle resolution 0.1º (LZM-125P+ only)
0.1 m
18 mm (both left and right Z units) as well as sweep with a total of 36 mm
0.125 m theoretical
32 mm
10:1 standard (For uniform direction, one-pass tapering) Dual direction tapering offers greatly increased taper ratios, as does tapering with more than one tapering pass
1 mm/sec standard
Internal firmware or operation by PC
Internal firmware or operation by PC
FPS software will be provided complete command set for PC control
Tablet computer is available as an option. Use of the FPS software on a PC provides finer control and additional features compared to the LZM-125 internal firmware.
USB 2.0 (For PC communications, data and image download, etc.) GPIB (for power meter feedback)
100-240 VAC
10 to 40°C / 5 to 60°C
Optional (Provides theta rotational motion for PM fiber alignment) Available for both left and right fibers, or one side only (depending upon customer requirements)
· PAS (For PANDA and other PM fibers) · IPA (Interrelation Profile Alignment, applicable to almost all PM fibers. Three distinct IPA methods available.) · End-view · Power meter feedback (Requires polarizer and analyzer, as well as GPIB interface) · Manual · Other methods by PC control
Internal end-view system
Customizable platform

AFLglobal.com | 800.235.3423

Specifications are subject to change without notice.

Fusion Splicing

Specialty Splicing Systems

LZM -100
2 mm to 125 m Splice
Advanced Adiabatic Tapering
Ball Lens 320 m with 125 Splice to 80 m Fiber
AFLglobal.com | 800.235.3423

LZM-100 Splicing System

The LZM-100 LAZERMaster is a glass processing and splicing system that uses a CO2 laser heat source to perform splicing, adiabatic tapering (to create MFAs or pump combiners), lensing, or other glass shaping operations with glass diameters of 2.3 mm or more. The high resolution optical analysis system works in conjunction with on-board firmware for fully automatic splicing, tapering and other glass shaping processes.
High precision glass processing is enabled by the intuitive and user-friendly on-board firmware (virtually identical to that of the Fujikura FSM-100 ARCMaster splicers). Operations may also be performed manually and by PC control. An FPS PC control GUI is supplied with the LZM-100 to provide additional features, greater flexibility and finer control. The FPS GUI is pre-installed on the All-in-one computer. Customers can also create proprietary PC control algorithms using a complete set of PC control commands.

Features
· CO2 laser heat source eliminates electrode or filament maintenance, provides extremely stable operation and greatly reduces the need for periodic calibration
· Automated laser beam diameter control to fine tune the size of the heating area · An advanced configurable system capable of producing tapers, ball lenses, combiners,
MFAs, glass shaping and splicing · Excellent performance for dissimilar diameter fiber splicing · Ultra high strength splicing · Redundant automated laser safety features · 2.3 mm maximum fiber diameter (larger fibers may be spliced manually) · Long travel / high resolution Z motion for long adiabatic tapers · Automatic operation by on-board LZM-100 splicer firmware, manual operation
or operation by PC (PC and FPS GUI included with the LZM-100 system) · Intuitive FPS PC GUI: Easy to understand, navigate and operate · Complete set of PC command codes enables users to develop proprietary processes

Ordering Information

DESCRIPTION

ITEM NO.

LAZERMaster LZM-100 Glass Processing & Splicing System (Standard baseline LZM-100 system. Includes AC adapters & cords and SpliceLab PC software)

S015871

LAZERMaster LZM-100 (with dual theta motors)

S015872

All-in-one Computer (includes keyboard and mouse, monitor stand for mounting all-in-one computer. SpliceLab software pre-installed.) (required)

S015242

End-View Observation & Alignment Option

S015244

Side Table Work Surface Option (Work surface to provide additional area for accessories

such as fiber preparation equipment. May be attached to the left or right side of the LZM-100 or both. Folds down against the side of the LZM-100 chassis when not needed or to allow

S015247

easy movement through narrow doorways.)

Cylindrical Lens & Lens Holder (optional)

S015251

LZM-100 Training (USA)

S015867

LZM-100 Training (International)

S015868

Splicer V-Groove Cleaning Kit

S014397

Specifications are subject to change without notice.

Fusion Splicing

Specialty Splicing Systems

LZM-100 Splicing System
Specifications

Fiber Heating and Splicing Method CO2 Laser Power Laser Safety Features
Laser Beam Control Typical Splice Loss Typical Splice Strength Visible Field of View Fiber Observation Methods
Applicable Fiber Diameter V-Groove Clamping System
Fiber Handling Alignment Methods
X/Y Alignment Resolution Maximum Z Travel Length Z Travel Resolution Maximum Taper Length Maximum Taper Ratio Maximum Taper Speed Splicing Control Fiber Tapering & Glass Shaping Control PC Control PC Option
Interface Ports Electrical Power Operating/Storage Conditions Rotation Motors PM Fiber Alignment Methods
End-View Observation & Alignment

CO2 Laser 30 W standard (Lasers expected lifetime is 20,000 hrs / 2.3 years before service is required.) · Metal cover with interlock, class 1 enclosure · Automatic actuation of safety shutter · Automatic laser power cutoff · Triple redundancy Proprietary feedback system assures laser beam power stability Laser beam size and shape may be customized to meet specific user requirements 0.02 dB for SMF (ITU-T G.652) 100 kpsi observed for SMF (ITU-T G.652) using appropriate fiber preparation equipment 2.5 mm (H) X 2.0 mm (W) · PAS (Profile Alignment System) via transverse fiber observation. · WSI (Warm Splice Image) and WTI (Warm Taper Image) · End-view observation (Optional) 80 m to 2300 m for automatic alignment by PAS Larger diameter fibers may be aligned manually or by power meter feedback · Infinitely variable from 80 m up to 2300 m · Clamping bare fiber or fiber coating · Patented "split V-groove" system Fujikura FSM-100, FSM-45 and FSM-40 splicer fiber holders Custom fixtures to meet specific customer requirements · PAS (Profile Alignment System, automatic alignment by camera observation) · Manual · Other methods by PC control · Power meter feedback via GPIB (Optional) · End-view (Optional) Sub-micron 150 mm (both left and right Z units) Sub-micron 130 mm 10:1 standard (For uniform direction, one-pass tapering) Dual direction tapering offers greatly increased taper ratios, as does tapering with more than one tapering pass. 1 mm/sec standard (Optional 5 mm/sec) Internal firmware or operation by PC Internal firmware or operation by PC SpliceLab software will be provided Complete command set for PC control An all-in-one computer is required. Use of the SpliceLab software on a PC provides finer control and additional features compared to the LZM-100 internal firmware. Using another software application, the PC interface also allows for advanced maintenance functions such as the ability to confirm laser beam alignment, and align if required. USB 2.0 (For PC communications, data and image download, etc.) GPIB (Optional, for power meter feedback) 100-240 VAC +10° to +30°C / +5° to +40°C Optional: Provides theta rotational motion for PM alignment for both left and right sides · PAS (For PANDA and other PM fibers) · IPA (Interrelation Profile Alignment, applicable to almost all PM fibers. Three distinct IPA methods available.) · End-view (Optional) · Power meter feedback (Requires polarizer and analyzer, as well as optional GPIB interface) · Manual · Other methods by PC control Optional internal end-view system

Preliminary Specifications, subject to revision and refinement

AFLglobal.com | 800.235.3423

Specifications are subject to change without notice.

Recoaters & Splice Protection

Fusion Splicing

FSR-05
FSR-06
FSR-07
Features · Easy mold, resin and pump exchange · Quartz molds for high-quality,
consistent recoating · Wide selection of available mold sizes · Automated operation · Bubble elimination system · Programmable resin injection · Selectable prooftester · PC interface with USB

FSR-05, FSR-06 and FSR-07 Optical Fiber Recoaters
AFL offers a complete lineup of high quality fiber recoaters to address the small packaging needs of the fiber optic industry. The FSR series recoaters provide automatic operation with an easily exchangeable, low cost, mold design. A quick change resin bottle and pump assembly make messy, cumbersome, and time consuming acrylate changes a thing of the past. The pump system also provides a purge cavity for elimination of bubbles in the acrylate material. A programmable resin injection system provides an exact volume of resin to the mold cavity to ensure consistent and repeatable recoat performance. While the base model FSR-05 provides only recoating functions, the FSR-06 and FSR- 07 also provide programmable rate and force proof-testing capabilities up to 2 kgf or 10 kgf respectively. All of the recoaters are compatible with special recoating resins to provide higher stiffness recoating for 900 m jacketed fibers, as well as specialty low-index resins for recoating of double-clad fibers. A USB - PC interface allows the user to control and store key parameters associated with the recoating process. The quartz mold technology provides very consistent recoating quality and have an estimated lifetime of 10,000 recoats per mold set.

Specifications

PARAMETER Applicable fiber coating Recoating diameter Recoating length Recoating time
Resin injection Recoat material
Material of mold Recoat modes
Proof-test modes
Load application Tension Dimensions
Weight Power source LCD monitor PC interface Operating condition Storage condition

FSR-05

FSR-06

FSR-07

Colored and non-colored

See mold options below

4 to 50 mm

Injection 20 sec/Curing 4 sec (Jacket diameter 250 m with 280 m MOLD)

Volume and speed are programmable

UV curable Acrylate Recommended specification for other viscosity 2000-6000 cps
Curing wavelength 365± 15 nm DSM Desotech DesoLite(R) 950-200 recommended

Quartz

100 modes All variables programmable

30 modes

Speed, force, time programmable

Linear Clamp

Mandrel

0.5 kgf ~ 2.0 kgf

0.5 kgf ~ 10.0 kgf

252 mm (W) x 135 mm (D) x 169 mm (H)

252 mm (W) x 175 mm (D) x 169 mm (H)

2.9 kg

4.3 kg

4.5 kg

AC 100 to 240 C /50 to 60 Hz (External AC adaptor ADC-19)

4.7 inch, Tilt angle

USB 2.0 Type B mini

10 to 30°C, 0 to 90% (non dew)

-40 to 60°C (non dew, no resin)

AFLglobal.com | 800.235.3423

Specifications are subject to change without notice.

Recoaters & Splice Protection

Fusion Splicing

FSR-05, FSR-06 and FSR-07 Optical Fiber Recoaters
Ordering Information
DESCRIPTION
FSR-05 with 255 m mold Includes: 255 m mold, ADC-19 AC adapter, ACC-09 AC power cord, USB-01 USB Cable and M-FSR05 instruction manual.
FSR-05 with 280 m mold Includes: 280 m mold, ADC-19 AC adapter, ACC-09 AC power cord, USB-01 USB Cable and M-FSR05 instruction manual. FSR-05 with 320 m mold Includes: 320 m mold, ADC-19 AC adapter, ACC-09 AC power cord, USB-01 USB Cable and M-FSR05 instruction manual. FSR-05 with 450 m mold Includes: 450 m mold, ADC-19 AC adapter, ACC-09 AC power cord, USB-01 USB Cable and M-FSR05 instruction manual. FSR-05 with 600 m mold Includes: 600 m mold, ADC-19 AC adapter, ACC-09 AC power cord, USB-01 USB Cable and M-FSR05 instruction manual. FSR-05 with 650 m mold Includes: 650 m mold, ADC-19 AC adapter, ACC-09 AC power cord, USB-01 USB Cable and M-FSR05 instruction manual. FSR-05 with 670 m mold Includes: 670 m mold, ADC-19 AC adapter, ACC-09 AC power cord, USB-01 USB Cable and M-FSR05 instruction manual. FSR-05 with 850 m mold Includes: 850 m mold, ADC-19 AC adapter, ACC-09 AC power cord, USB-01 USB Cable and M-FSR05 instruction manual. FSR-05 with 1000 m mold Includes: 1000 m mold, ADC-19 AC adapter, ACC-09 AC power cord, USB-01 USB Cable and M-FSR05 instruction manual. FSR-06 with 280 m mold Includes: 280 m mold, 2 kgf Proof Tester, ADC-19 AC adapter, ACC-09 AC power cord, USB-01 USB Cable, PC-02 Fiber protect cover and M-FSR05 instruction manual. FSR-06 with 320 m mold Includes: 320 m mold, 2 kgf Proof Tester, ADC-19 AC adapter, ACC-09 AC power cord, USB-01 USB Cable, PC-02 Fiber protect cover and M-FSR05 instruction manual. FSR-06 with 330 m mold Includes: 330 m mold, 2 kgf Proof Tester, ADC-19 AC adapter, ACC-09 AC power cord, USB-01 USB Cable, PC-02 Fiber protect cover and M-FSR05 instruction manual. FSR-06 with 450 m mold Includes: 450 m mold, 2 kgf Proof Tester, ADC-19 AC adapter, ACC-09 AC power cord, USB-01 USB Cable, PC-02 Fiber protect cover and M-FSR05 instruction manual. FSR-06 with 600 m mold Includes: 600 m mold, 2 kgf Proof Tester, ADC-19 AC adapter, ACC-09 AC power cord, USB-01 USB Cable, PC-02 Fiber protect cover and M-FSR05 instruction manual. FSR-06 with 700 m mold Includes: 700 m mold, 2 kgf Proof Tester, ADC-19 AC adapter, ACC-09 AC power cord, USB-01 USB Cable, PC-02 Fiber protect cover and M-FSR05 instruction manual. FSR-06 with 1000 m mold Includes: 1000 m mold, 2 kgf Proof Tester, ADC-19 AC adapter, ACC-09 AC power cord, USB-01 USB Cable, PC-02 Fiber protect cover and M-FSR05 instruction manual. FSR-07 with 280 m mold Includes: 280 m mold, 10 kgf Proof Tester, ADC-19 AC adapter, ACC-09 AC power cord, USB-01 USB Cable, PC-03 Fiber protect cover and M-FSR05 instruction manual. FSR-07 with 600 m mold Includes: 600 m mold, 10 kgf Proof Tester, ADC-19 AC adapter, ACC-09 AC power cord, USB-01 USB Cable, PC-03 Fiber protect cover and M-FSR05 instruction manual.

AFL NO. S017436 S016103 S016833 S016276 S016834 S016946 S017385 S016949 S016998 S016104
S016835
S016859
S016186
S016836
S017507
S017001
S016105
S016999

AFLglobal.com | 800.235.3423

Specifications are subject to change without notice.

Recoaters & Splice Protection

Fusion Splicing

FSR-05, FSR-06 and FSR-07 Optical Fiber Recoaters

Accessories
DESCRIPTION MOLDS FSR-05-MOLD-195 FSR-05-MOLD-255 FSR-05-MOLD-280 FSR-05-MOLD-300 FSR-05-MOLD-320 FSR-05-MOLD-330 FSR-05-MOLD-450 FSR-05-MOLD-600 FSR-05-MOLD-650 FSR-05-MOLD-670 FSR-05-MOLD-700 FSR-05-MOLD-850 FSR-05-MOLD-1000

AFL NO.
S016133 S016134 S016106 S017710 S016829 S016895 S016135 S016830 S016947 S016136 S017477 S016950 S016137

DESCRIPTION MISCELLANEOUS Fiber protect cover for FSR-06: PC-02 Fiber protect cover for FSR-07: PC-03 Tube set: FSR-05-TUBE-01 Pump head: FSR-05-PUMP-01 UV resin bottle: FSR-05-BTL-01 Force gauge adaptor: FGA-02 AC adapter ADC-19 AC power cord ACC-09

AFL NO.
S016107 S016108 S016109 S016110 S016112 S016113 S015523 S014390

Mold exchange

· Easy mold, resin and pump exchange
· Factory installation is not required

Bubble Separator

Bubble Separator Performance

Resin and pump exchange

Spare Pump for quickly changing UV resin type: FSR-05-pump-01

AFLglobal.com | 800.235.3423

Specifications are subject to change without notice.

Splice Protection

Fusion Splicing

Standard Sleeves: Dimensions & Applicable Fiber

SLEEVES FOR SINGLE FIBERS 250 MICRONS TO 900 MICRONS

DESCRIPTION FP-60 FP-40

SLEEVE LENGTH 60 mm 40 mm

FIBER CLEAVE LENGTH 16 mm 10 mm

SLEEVE DIAMETER AFTER SHRINK 3.1 mm (max.) 3.1 mm (max.)

PACKAGING

AFL NO.

1000 Box/100 Pack S015915

1000 Box/100 Pack S015916

SLEEVES FOR UP TO 250 MICRON COATED RIBBON

DESCRIPTION FP-04(T) FP-05 FP-05-28 FPS04-30 FPS08-28 FPS24-40

FIBER COUNT Up to 8 fibers Up to 12 fibers Up to 12 fibers Up to 4 fibers Up to 8 fibers Up to 24 fibers

SLEEVE LENGTH 40 mm 40 mm 28 mm 30 mm 28 mm 40 mm

FIBER CLEAVE LENGTH 10 mm 10 mm 10 mm 10 mm 10 mm 10 mm

SLEEVE DIAMETER AFTER SHRINK 4.0 mm (max.) 4.5 X 4.0 mm (max.) 4.5 mm (max.) 2.4 mm (max.) 3.3 X 2.7 mm (max.) 8.0 X 4.0 mm (max.)

PACKAGING 250 Box/25 Pack 250 Box/5 Pack 250 Box/25 Pack 1,000 Box/25 Pack 500 Box/25 Pack 200 Box/5 Pack

AFL NO. S002105 S003027 S014720 S010848 S013560 S013004

Specifications PARAMETER Outer tube Inner Tube Strength member Operation condition (after shrink) Storage condition (before shrink)

DESCRIPTION FP-60/40/03 series FPS-04(T) / FP-05 ALL FP-60/40/03 series FP-04(T) / FP-05

VALUE Polyolefin based on Polyethylene Ethylene-Vinyl Acetate Ethylene-Vinyl Acetate Stainless steel Heat-resistant glass -10 to 50°C, 0 to 95% RH (Non dew) -40 to 60°C, Non dew

FP-03 series FPS01 series FP-40 series FP-60 series
FP-04(T)/05 FPS04-30 FPS08-28 FPS24-40

AFLglobal.com | 800.235.3423

Specifications are subject to change without notice.

Splice Protection

Fusion Splicing

Splice Protection Sleeves

Micro Sleeves: Dimensions & Applicable Fiber

FPS01-400 SERIES FOR SINGLE FIBERS UP TO 400 MICRON FIBER

DESCRIPTION FPS01-400-12 FPS01-400-15 FPS01-400-20 FPS01-400-25 FPS01-400-34 FPS01-400-40

SLEEVE LENGTH 12 mm 15 mm 20 mm 25 mm 34 mm 40 mm

FIBER CLEAVE LENGTH 4 mm 5 mm 8 mm 10 mm 15 mm 16 mm

SLEEVE DIAMETER AFTER SHRINK 1.5 mm 1.5 mm 1.5 mm 1.5 mm 1.5 mm 1.5 mm

PACKAGING 50 Pack 50 Pack 50 Pack 50 Pack 50 Pack 1,250 Box

AFL NO. S014088 S012668 S012672 S012676 S012680 S011914

FPS01-900 SERIES FOR SINGLE FIBERS UP TO 900 MICRON FIBER

DESCRIPTION FPS01-900-15 FPS01-900-20 FPS01-900-25 FPS01-900-34 FPS01-900-45

SLEEVE LENGTH 15 mm 20 mm 25 mm 34 mm 45 mm

FIBER CLEAVE LENGTH SLEEVE DIAMETER AFTER SHRINK

4 mm

2.3 mm

6 mm

2.3 mm

6 mm

2.3 mm

13 mm

2.3 mm

16 mm

2.3 mm

PACKAGING 50 Pack 50 Pack 50 Pack 50 Pack 50 Pack

AFL NO. S012684 S012688 S011954 S012692 S012696

Specifications
PARAMETER Outer tube Inner Tube
Strength member
Operation condition (after shrink) Storage condition (before shrink)

DESCRIPTION FPS01 series / FPS04-30 / FPS08-28 / FPS24-40 ALL FPS01 series FPS04-30 / FPS08-28 / FPS24-40

VALUE Polyolefin based on Polyethylene Ethylene-Vinyl Acetate Stainless steel Heat-resistant glass -10 to 50°C, 0 to 95% RH (Non dew) -40 to 60°C, Non dew

Type Variations

AFLglobal.com | 800.235.3423

FULL SCALE

Specifications are subject to change without notice.

Cleavers

Fusion Splicing

Shown in CC-37 Carrying Case
Features · Motorized blade rotation · Bluetooth communication · Shock resistant · Simple one-step operation · 60,000 cleave blade life · Field serviceable

CT52 Fiber Cleaver
The CT52 cleaver is designed for use with Fujikura factory model fusion splicers. Modified clamping pads on the CT52 allow for shorter cleave lengths with fiber coating >250 m. The CT52 provides unprecedented durability and simplistic maintenance unseen with any other cleaver. Cleaver blade life is easily managed and maximized via Bluetooth connection with a convenient smartphone app. Incorporating motorized push-button blade rotation and a convenient thumbwheel for blade height adjustment, routine cleaver adjustments have never been easier! The 16 position blade yields 60,000 cleaves providing for extended intervals between blade replacement. The CT52 is designed for use with either Fujikura FH-100 or FH-70 series fiber holders, but can also be used with the optional adapter plate to eliminate the need for fiber holders if desired. When utilized with the optional spacers for the cleaver and RS series thermal stripper, six different cleave lengths can be easily attained.

Specifications ITEM Applicable Fiber
Applicable Coating

Fiber type Fiber count Cladding dia. Fiber plate Fiber holder

Cleave Length

Fiber plate

Cleave Angle Blade Life
Physical description

Fiber holder Single fiber Fiber ribbon
Dimensions W Dimensions D Dimensions H Weight

Temperature Environmental condition

Humidity

Battery Wireless interface Screw hole for tripod

Other features

Blade rotation Replaceable parts

VALUE Single mode optical fiber Multi mode optical fiber Up to 12 fiber ribbon Approx. 125 um AD-10-M24 : Max. 900 µm coating diameter AD-50 : Max. 3 mm coating diameter Coating shape. : Refer to splicer fiber holder options CD = Coating Diameter AD-10-M24 3 to 20 mm for CD 250 µm 8 to 20 mm for CD 251 400 µm AD-50 CD= 250 µm or less : 3 to 20mm 250 µm < CD < 1000 µm : 8 to 20 mm 1000 µm < CD < 3 mm : 14 to 20 mm See Cleaver Selection table on next page Avg. 0.3 to 0.9 degrees Avg. 0.3 to 1.2 degrees Approx. 60,000 fiber cleaves Approx. 120 mm when closing the lever Approx. 95 mm when closing the lever Approx. 58 mm when closing the lever Approx. 305 g including battery and AD-10-M24 Operate : -10 to 50oC Storage : -40 to 80oC Operate : 0 to 95% non-condensing Storage : 0 to 95% non-condensing 2 pieces of LR03/AAA dry battery Bluetooth 4.1 LE 1/4-20UNC Motorized rotation Manual rotation dial Blade Clamp arm

AFLglobal.com | 800.235.3423

Specifications are subject to change without notice.

Cleavers

CT52 Fiber Cleaver

Cleaver Selection

STRIPPER

CLEAVER

RS02/03
RS02/03 with SPA-RS02-08
HTS-12
SS03

CT52/58 with SPA-CT08-08
CT52/58 with SPA-CT08-09
CT52/58 with SPA-CT08-010

CLEAVE LENGTH
3 mm 8 mm 4 mm 9 mm 5 mm 10 mm

Ordering Information
DESCRIPTION CT52 Includes: CT52 cleaver, SPA-CT08-09 cleaver spacer, hex wrench, carrying case and instruction manual

APPLICATION Single Fibers: 125 µm cladding

Accessories
DESCRIPTION CB-08 Replacement Blade CC-37 Transit Case AD-10-M24 Adapter Plate SPA-CT08-10 Spacer SPA-CT08-09 Spacer SPA-CT08-08 Spacer ARM-CT52-01 Replacement Arm Set FDB-05 Fiber Dust Box BRW-CT08-01 Blade Rotary Wheel SC-CT50-01 Side Cover

AFL NO. S017078
AFL NO. S017076 S017077 S017335 S017011 S017390 S017391 S017388 S017121 S017110 S017108

Splice+ is a smartphone application that works in cooperation with Fujikura's splicers, cleavers and ribbon fiber strippers which have Bluetooth capability.
Get the Splice+ app at the Apple App store or at Google Play.

Fusion Splicing

AFLglobal.com | 800.235.3423

Specifications are subject to change without notice.

Cleavers

Fusion Splicing

Shown in CC-37 Carrying Case
Features · Motorized blade rotation · Bluetooth communication · Shock resistant · Simple one-step operation · 60,000 cleave blade life · Field serviceable

CT58 Fiber Cleaver
The CT58 cleaver is designed specifically for cleaving silica fibers with 80 µm cladding and up to 400 µm coatings. The CT58 provides unprecedented durability and simplistic maintenance unseen with any other cleaver. Cleaver blade life is easily managed and maximized via Bluetooth connection with a convenient smartphone app. Incorporating motorized push-button blade rotation and a convenient thumbwheel for blade height adjustment, routine cleaver adjustments have never been easier! The 16 position blade yields 60,000 cleaves providing for extended intervals between blade replacement. The CT58 is designed for use with either Fujikura FH-100 or FH-70 series fiber holders, but can also be used with the optional adapter plate to eliminate the need for fiber holders if desired. When utilized with the optional spacers for the cleaver and RS03-80 thermal stripper, six different cleave lengths can be easily attained.

Specifications ITEM Applicable Fiber
Applicable Coating

Fiber type Fiber count Cladding dia. Fiber plate Fiber holder

Cleave Length

Fiber plate

Cleave Angle Blade Life
Physical description

Fiber holder Single fiber
Dimensions W Dimensions D Dimensions H Weight

Environmental condition Temperature

Humidity

Battery Wireless interface Screw hole for tripod

Other features

Blade rotation Replaceable parts

VALUE Single mode optical fiber Multi mode optical fiber Single Approx. 80 µm AD-10-M24 : Max. 400 µm coating diameter AD-50 : Max. 400 µm coating diameter Coating shape. : Refer to splicer fiber holder options CD = Coating Diameter AD-10-M24 3 to 20 mm for CD 250 µm 8 to 20 mm for CD 251 400 µm AD-50 CD= 250 µm or less : 3 to 20 mm 250 µm < CD < 400 µm : 8 to 20 mm See Cleaver Selection table on next page Avg. 0.3 to 0.9 degrees Approx. 60,000 fiber cleaves Approx. 90 mm when closing the lever Approx. 95 mm when closing the lever Approx. 58 mm when closing the lever Approx. 265 g Operate : -10 to 50oC Storage : -40 to 80oC Operate : 0 to 95% non-condensing Storage : 0 to 95% non-condensing 2 pieces of LR03/AAA dry battery Bluetooth 4.1 LE 1/4-20UNC Motorized rotation Manual rotation dial Blade Clamp arm

AFLglobal.com | 800.235.3423

Specifications are subject to change without notice.

Cleavers

CT58 Fiber Cleaver

Cleaver Selection

STRIPPER

CLEAVER

RS02/03
RS02/03 with SPA-RS02-08
HTS-12
SS03

CT52/58 with SPA-CT08-08
RS02/03 with SPA-CT08-09
RS02/03 with SPA-CT08-10

CLEAVE LENGTH
3 mm 8 mm 4 mm 9 mm 5 mm 10 mm

Ordering Information
DESCRIPTION CT58 Includes: CT58 cleaver, SPA-CT08-09 cleaver spacer, hex wrench, carrying case and instruction manual

APPLICATION Single Fibers: 80 µm cladding

AFL NO. S017097

Accessories
DESCRIPTION CB-08 Replacement Blade CC-37 Transit Case AD-10-M24 Adapter Plate SPA-CT08-10 Spacer SPA-CT08-09 Spacer SPA-CT08-08 Spacer ARM-CT58-01 Replacement Arm Set BRW-CT08-01 Blade Rotary Wheel SC-CT50-01 Side Cover

AFL NO. S017076 S017077 S017335 S017011 S017391 S017390 S017389 S017110 S017108

Fusion Splicing

AFLglobal.com | 800.235.3423

Specifications are subject to change without notice.

Cleavers

Fusion Splicing

CT-101 and CT-102 Fiber Cleavers
Precise cleaving is required for photonic splicing applications as the types of optical fiber become more diversified to meet new applications. In addition, angled cleaving is often required for low back-reflection fiber end preparation. The CT-101 and CT-102 have been developed to offer adjustability and versatility for these various fiber types and applications while offering superior tension cleaving performance beyond conventional cleavers that utilize a scribe and bend cleaving method. The CT-101 and CT-102 are equipped with a motorized diamond blade that touches the fiber after tension has been applied providing high-strength cleaving capability. The CT-101 is designed to accommodate the Fujikura FH-100 fiber holders while the CT-102 has been designed to accommodate the FH-70 fiber holders.

Features
· Diamond blade with long blade life · Large diameter fiber cleaving capability (fiber diameter range 80 to 250 µm) · Angle cleaving capability (0 to 15 degrees) · Cleave counter · Adjustable cleave length · Dual power sources (4 "AA" batteries or AC adapter)

Specifications
PARAMETER Applicable Fiber Cleaving Performance Cladding Diameter Coating Diameter Cleave Angle Capability Cleave Length Dimensions Weight Blade Lifetime DC Power Supply AC Power Supply Operating Conditions Storage Conditions

VALUE Conventional silica optical fiber Typical 0.3 degrees (125 µm SMF) 80 to 250 µm 160 to 2000 µm 0 to 15 degrees (adjustable) 3 to 40 mm with Fiber Holder, FH-100 series or FH-70 series 140 mm (W) x 110 mm (D) x 95 mm (H) 900 g or less (excluding batteries) 20,000 fibers (1,000 fibers x 20 points) (125 µm SMF) 4 AA batteries (approx. 1,000 cleaves) 100 to 240 VAC / 50 to 60 Hz using ADC-16 Temperature: 0 to 40°C, Humidity: 0 to 95% RH (Non-dew) Temperature: -40 to 80°C, Humidity: 0 to 95% RH (Non-condensing)

Ordering Information
DESCRIPTION CT-101 Advance Optical Fiber Cleaver Compatible with FH-100 Fiber Holders CT-102 Advance Optical Fiber Cleaver Compatible with FH-70 Fiber Holders

AFL NO. S016287 S016288

Accessories
DESCRIPTION ADC-16 AC Adapter ACC-09 AC Power Cord CB-06 Cleaver Blade

AFL NO. S015017 S014390 S016078

AFLglobal.com | 800.235.3423

Specifications are subject to change without notice.

Cleavers

CT-104 CT-105 CT-106

Fusion Splicing

CT-104, CT-105 and CT-106 Fiber Cleavers
When exceptional cleave quality is required for fibers up to 1,250 m, the new large diameter CT-104/CT-105/CT-106 cleaver family provides a variety of options depending on your needs. The color LCD shows cleaving progress and recommended insert size depending on fiber coating and cladding diameter. Saving and storing cleaving programs to a PC or tablet is accomplished using a USB port. The LDF cleaver's extensive programming features allow for optimal results.

Specifications
PARAMETER Applicable optical fiber Number of fibers Cladding diameter Coating diameter Fiber clamping
Cleaving length Angled cleaving
Blade life Number of cleaving modes Language Monitor Dimensions
Weight Power supply Operation condition Storage condition Terminal

CT-104

CT-105

CT-106

Glass optical fibers, capillary

Single

80 - 600 m

80 - 1,250 m

160 - 3,000 m

Manual clamping with torque driver
when required

Automatic clamping

5 - 40 mm

0 - 15°

(up to 800 m

cladding fiber)

20,000 fibers (Cladding diameter 125 m)

Maximum 100

English/Japanese

4.7 inches color LCD

240(W)×134(D)×155(H) mm

240(W)×134(D) ×162.5(H) mm

3.4 kg

3.5 kg

3.8 kg

AC adapter : ADC-19 Input : AC100 to 240 V (50 to 60 Hz) (max. 20 W)

0 to 95% RH and 0 to 40°C (non-dew)

0 to 95% RH and -40 to 80°C (non-dew)

USB 2.0 (Mini-B type) for PC communication

Ordering Information

DESCRIPTION

AFL NO.

CT-104 Large Diameter Optical Fiber Cleaver Includes: ADC-19 AC adapter, ACC-09 AC power cord, HEX-01 hex wrench, USB-01 USB Cable and M-CT104 instruction manual

S016417

CT-105 Large Diameter Optical Fiber Cleaver

S016076

Includes: ADC-19 AC adapter, ACC-09 AC power cord, HEX-01 hex wrench, USB-01 USB Cable

and M-CT105 instruction manual

CT-106 Angled Large Diameter Optical Fiber Cleaver

S016077

Includes: ADC-19 AC adapter, ACC-09 AC power cord, HEX-01 hex wrench, USB-01 USB Cable

and M-CT105 instruction manual

AFLglobal.com | 800.235.3423

Specifications are subject to change without notice.

Cleavers

Fusion Splicing

CT-104, CT-105 and CT-106 Fiber Cleavers

CT-104 Features
· 80 - 600 m cladding diameter · Manual clamping system · Up to 100 stored program modes · 20,000 cleaves per blade for 125 m fiber · Optional adapter for use with
FH-100 series fiber holders · Communication to a PC via USB

CT-105 Features
· 80 - 1,250 m cladding diameter · Automatic clamping system · Up to 100 stored program modes · 20,000 cleaves per blade for 125 m fiber · Optional adapter for use with
FH-100 series fiber holders · Fiber backstop standard · Communication to a PC via USB

CT-106 Features
· 80 - 1,250 m cladding diameter · Automatic clamping system · Up to 100 stored program modes · Angled cleaving function (up to 15º on
fibers up to 800 m cladding diameter) · 20,000 cleaves per blade for 125 m fiber · Optional adapter for use with
FH-100 series fiber holders · Fiber backstop standard · Communication to a PC via USB

clamp

backstop

blade
fiber backstop

Angled Cleaving Angled cleaving from up to 15° is possible for fibers up to 800 µm (only for CT-106)

Automatic Clamp Function Clamping optical fiber with programmable force automatically. No compressed air or torque wrenches required.

Accessories
DESCRIPTION CB-06 Replacement Blade AC adapter ADC-19 AC power cord ACC-09 Fiber Holder Inserts Master fiber holder insert kit (includes all available inserts listed below) INSERT-L-80 INSERT-L-125 INSERT-L-160 INSERT-L-250 INSERT-L-400 INSERT-L-500-750

AFL NO. S016078 S015523 S014390
S016098
S016085 S016086 S016087 S016088 S016089 S016090

DESCRIPTION

AFL NO.

Fiber Holder Inserts (continued)

INSERT-L-1000-1250

S016091

INSERT-L-1500-1750

S016092

INSERT-L-2000-2250

S016093

INSERT-L-2500-3000

S016094

INSERT-U-80-400

S016079

INSERT-U-500-750

S016080

INSERT-U-1000-1250

S016081

INSERT-U-1500-1750

S016082

INSERT-U-2000-2250

S016083

INSERT-U-2500-3000

S016084

Backstop A back stop is important for cleaving both very small and large diameter fibers and is standard on CT-105 and CT-106 cleavers.

DESCRIPTION

AFL NO.

Height adjusting spacer (10 piece pack)

SPA-CT105-30 (30 m)

S016095

SPA-CT105-50 (50 m)

S016096

SPA-CT105-100 (100 m)

S016097

Optional Items

AD-CT105-FH100 Fiber Holder Adapter TD-01 Torque Driver

S016450 S016738

AFLglobal.com | 800.235.3423

Specifications are subject to change without notice.

Cleavers

Fusion Splicing

CT-104, CT-105 and CT-106 Fiber Cleavers

Insert Selection Guide

INSERT-L-80

INSERT-L-125

INSERT-L-160

INSERT-L-250

INSERT-L-400

INSERT-L-500-750

F R

INSERT-L-1000-1250

F R

INSERT-L-1500-1750

F R

INSERT-L-2000-2250

F R

INSERT-L-2500-3000

F R

INSERTU-80-400
60-100 90-160 115-200 180-300 280-500

INSERT-U-500-750 INSERT-U-1000-1250 INSERT-U-1500-1750 INSERT-U-2000-2250 INSERT-U-2500-3000

475-700

675-950

925-1150
1125-1400 1375-1700 1675-1900 1875-2200 2175-2450 2425-2750 2725-3175

Upper and lower inserts can be changed up or down depending on required fiber fit into the V-groove.
Inserts 500 m and above are double-sided. Therefore, the visible label when inserted indicates the size of the insert you are using.

Upper and lower inserts are necessary for both left and right side clamps.
Case 1: Cleaving fiber with a coating

Case 2: Cleaving glass rod

L: INSERT-U-xxx-xxx

R: INSERT-U-xxx-xxx

L: INSERT-L-xxx-xxx

R: INSERT-L-xxx-xxx

According to coating diameter

According to cladding diameter

Inserts according to both coating diameter and cladding diameter are necessary.

L: INSERT-U-xxx-xxx

R: INSERT-U-xxx-xxx

L: INSERT-L-xxx-xxx

R: INSERT-L-xxx-xxx

According to coating diameter

According to cladding diameter

Two insert pairs of the same size according to rod diameter are necessary.

AFLglobal.com | 800.235.3423

Specifications are subject to change without notice.

Fusion Splicing

Cleavers

CT-104+ CT-105+ CT-106+
AFLglobal.com | 800.235.3423

CT-104+, CT-105+ and CT-106+ Fiber Cleavers
When exceptional cleave quality is required for fibers up to 1,250 m, the new large diameter CT-104+/CT-105+/CT-106+ cleaver family provides a variety of options depending on your needs. The color LCD shows cleaving progress and recommended insert size depending on fiber coating and cladding diameter. Saving and storing cleaving programs to a PC or tablet is accomplished using a USB port. The LDF cleaver's extensive programming features allow for optimal results.
Excess clamping force may deform the coating or worsen the cleave angle due to rotational stress by the clamps. Therefore, to get good cleaving quality, the clamping force should be the minimum force that does not slip while the cleaver applies fiber tension. The optimum clamping force depends on the optical fibers structure and coating material. The CT105+/ CT-106+ cleavers feature a new technology that finds the optimum clamping force automatically and accurately.

Specifications

PARAMETER

CT-104+

CT-105+

CT-106+

Applicable optical fiber

Glass optical fibers, capillary

Number of fibers

Single

Cladding diameter

80 - 600 m

80 - 1,250 m

Coating diameter

160 - 3,000 m

Fiber clamping

Manual clamping

Automatic clamping

Cleaving length

5 - 40 mm

Cleaving angle1 Average 0.2 degrees or less (Cladding diameter 125 m)2

Average 0.3 degrees or less (Cladding diameter 400 m)2

Average 0.4 degrees or less Average 1.0 degrees or less (Cladding diameter 1,000 m)3 (Cladding diameter 600 m)3

Angled cleaving

0 - 15°

(up to 800 m cladding fiber)

Blade life4

200,000 fibers (Cladding diameter 250 m)

Dimensions (WxDxH)

240x134x155 mm

240x134x163mm

Weight

3.4 kg

3.5 kg

3.8 kg

Humidity

0 to 95% RH, non-condensing

Temperature

0°C to +50°C (operation) -40°C to +80°C (storage)

Number of

Maximum 100

cleaving modes

Cleave result

1,000 cleave data

Power supply

AC adapter : ADC-19A Input : AC100 to 240 V (50 to 60 Hz) (max. 20 W)

Monitor

TFT 4.7 inches color LCD

PC interface

USB 2.0 (Mini-B type) for PC communication

Notes: 1. A new blade was used to cleave the special fibers. The average cleave angle changes depending on the environmental
conditions, blade condition, operating method, and cleanliness. 2. Measured with an interferometer at room temperature. 3. Measured with the splicer, FSM-100P+. 4. The blade life changes depending on the environmental conditions, operating method, and the fiber type cleaved.

Specifications are subject to change without notice.

Fusion Splicing

Cleavers

CT-104+, CT-105+ and CT-106+ Fiber Cleavers

CT-104+ Features
· 80 - 600 m cladding diameter · Manual clamping system · Up to 100 stored program modes · 200,000 cleaves per blade for 250 m fiber · Optional adapter for use with
FH-100 series fiber holders · Communication to a PC via USB

CT-105+ Features
· 80 - 1,250 m cladding diameter · Automatic clamping system · Up to 100 stored program modes · 200,000 cleaves per blade for 250 m fiber · Optional adapter for use with
FH-100 series fiber holders · Fiber backstop standard · Communication to a PC via USB

CT-106+ Features
· 80 - 1,250 m cladding diameter · Automatic clamping system · Up to 100 stored program modes · Angled cleaving function (up to 15º on
fibers up to 800 m cladding diameter) · 200,000 cleaves per blade for 250 m fiber · Optional adapter for use with
FH-100 series fiber holders · Communication to a PC via USB

clamp

backstop

blade
fiber backstop

Angled Cleaving Angled cleaving from up to 15° is possible for fibers up to 800 µm (only for CT-106+)

Automatic Clamp Function Clamp optical fiber with programmable force automatically (CT-105+ and CT-106+ only). No compressed air or torque wrenches required.

Backstop Improves cleave quality especially for large-diameter fibers as well as lower tension fiber cleaving and is standard on CT-105+ cleavers.

Ordering Information

DESCRIPTION

AFL NO.

CT-104+ Large Diameter Optical Fiber Cleaver includes: ADC-19A AC adapter, ACC-09 AC power cord, HEX-01 hex wrench,

USB-01 USB Cable and M-CT104+ instruction manual

S016417

CT-105+ Large Diameter Optical Fiber Cleaver includes: ADC-19A AC adapter, ACC-09 AC power cord, HEX-01 hex wrench, S016076 USB-01 USB Cable and M-CT105+ instruction manual

CT-106+ Angled Large Diameter Optical Fiber Cleaver includes: ADC-19A AC adapter, ACC-09 AC power cord, HEX-01 hex S016077 wrench, USB-01 USB Cable and M-CT106+ instruction manual

Accessories
DESCRIPTION CB-06A Replacement Blade AC adapter ADC-19A AC power cord ACC-09 Fiber Holder Inserts Master fiber holder insert kit (includes all available inserts listed below) INSERT-L-80 INSERT-L-125 INSERT-L-160 INSERT-L-250 INSERT-L-400 INSERT-L-500-750

AFL NO. S016078 S015523 S014390
S016098
S016085 S016086 S016087 S016088 S016089 S016090

AFLglobal.com | 800.235.3423

DESCRIPTION

AFL NO.

Fiber Holder Inserts (continued)

INSERT-L-1000-1250

S016091

INSERT-L-1500-1750

S016092

INSERT-L-2000-2250

S016093

INSERT-L-2500-3000

S016094

INSERT-U-80-400

S016079

INSERT-U-500-750

S016080

INSERT-U-1000-1250

S016081

INSERT-U-1500-1750

S016082

INSERT-U-2000-2250

S016083

INSERT-U-2500-3000

S016084

DESCRIPTION

AFL NO.

Height adjusting spacer (10 piece pack)

SPA-CT105-30-10SET (30 m)

S016095

SPA-CT105-50-10SET (50 m)

S016096

SPA-CT105-100-10SET (100 m) S016097

Optional Items

AD-CT105-FH100 Fiber Holder Adapter

S016450

TD-01 Torque Driver

S016738

Specifications are subject to change without notice.

Cleavers

Fusion Splicing

CT-104+, CT-105+ and CT-106+ Fiber Cleavers

Insert Selection Guide

UPPER INSERT

LOWER INSERT

INSERTU-80-400

INSERT-L-80 INSERT-L-125 INSERT-L-160 INSERT-L-250 INSERT-L-400
INSERT-L-500-7501

54-107 84-167 105-213 167-333 267-533 500 334-667 750

INSERT-L-1000-12501 1000 1250

INSERT-L-1500-17501

1500 1750

INSERT-L-2000-22501

2000 2250

INSERT-L-2500-30001

2500 3000

INSERT-U-500-7501 INSERT-U-1000-12501 INSERT-U-1500-17501 INSERT-U-2000-22501 INSERT-U-2500-30001

500

750

1000

1250

1500

1750

2000 2250 2500 3000

400-533 467-667 634-868

550-667 717-1000 787-1000 884-1118 954-1188 1037-1272
1120-1355 1204-1438 1287-1522 1370-1605 1454-1688 1537-1772 1620-1855 1704-1938 1780-2015 1870-2105 1947-2288 2030-2265 2114-2348 2197-2432 2280-2515 2364-2598 2447-2682 2614-2848 2780-3015 2947-3182

Note: 1. Each side of this insert is equipped with a groove that is marked with the size of the fiber diameter on the table.

Upper and lower inserts are necessary for both left and right side clamps.
Case 1: Cleaving coating-stripped fiber

Case 2: Cleaving glass rod

L: INSERT-U-xxx-xxx

R: INSERT-U-xxx-xxx

L: INSERT-L-xxx-xxx

R: INSERT-L-xxx-xxx

According to coating diameter

According to cladding diameter

Inserts according to both coating diameter and cladding diameter are necessary.

L: INSERT-U-xxx-xxx

R: INSERT-U-xxx-xxx

L: INSERT-L-xxx-xxx

R: INSERT-L-xxx-xxx

According to coating diameter

According to cladding diameter

Two insert pairs of the same size according to rod diameter are necessary.

AFLglobal.com | 800.235.3423

Specifications are subject to change without notice.

Cleavers

Fusion Splicing

PowerCleave®
To complement the line of world class splicing systems, AFL's PowerCleave combines the precision of an ultrasonic cleaver with the ease and improved fiber management of the Fujikura fiber holder system. The PowerCleave utilizes the tensile stress method to avoid touching or damaging the bare glass surface during cleaving, ensuring highly robust, reliable
photo
and durable splice results. The PowerCleave provides consistent flat ends even at cleave lengths as short as 3 mm. Specially designed for use with Fujikura's specialty market splicers, this advanced cleaving system allows for more reliability and greater splicing consistency with less dependence on operator technique.

Features
· Tensile cleaving with ultrasonic blade · Consistent, low-angle cleaves of short cleave-length fibers · Fiber holder system reduces fiber handling · Clean, reliable quality

Specifications
PARAMETER Fibers Cleaved Minimum Cleave Length Cleave Angle Blade Clamping System Case
Battery Dimensions (L x W x D) Weight Operating Temperature Storage Temperature

VALUE 80 µm - 200 µm (cladding diameter) 3 mm <0.6 typical Diamond with an estimated life of over 20,000 cleaves Compatible with Fujikura specialty market fiber holder systems ABS impact resistant with non-slip feet and a 6.25 mm (.24 inch) BSW thread tripod mount for hard mounting to a workstation 9V alkaline (MN 1604), battery life approximately 10,000 cleaves 75 mm x 153 mm x 150 mm (3.0 x 6.0 x 5.9 inches) 1.1 kg (2.4 lbs) 0°C to 45°C (32°F to 113°F) -20°C to 60°C (-4°F to 140°F)

Ordering Information
DESCRIPTION PowerCleave Kit Includes: PowerCleave, Instruction manual, 2.5 mm x 60 mm Screwdriver and 2 mm Allen wrench

AFL NO. S009972

AFLglobal.com | 800.235.3423

Specifications are subject to change without notice.

Fusion Splicing

Strip, Clean & Fiber Prep

AFL PowerStrip®
AFL PowerStrip is a thermal stripper used in high strength splicing. Using the proven blade and centering design of the Schleuniger FiberStrip 7030 in addition to the fiber holder system, the AFL PowerStrip automatically centers the fiber, heats the buffer or coating and strips the buffer at a controlled rate with perfect alignment. The fiber holder system reduces fiber handling, making this tool ideal for any production environment.

Features
· 250 µm and 900 µm fiber capability · Short cycle time · Lightweight and portable

Specifications
PARAMETER Fibers Stripped - Single Buffered Fiber
Clamping System
Stripping Length Heater Temperature Range Heating Time Cycle Time Power Supply Dimensions (L x W x D) Weight

VALUE Cladding diameter: 125 µm standard, 80 µm optional Coating diameter: 250 µm and 900 µm standard,
160 µm and 400 µm optional Fujikura fiber holder clamp; compatible with FSM-45F/PM and 100 series fiber holders Up to 35 mm 110°C to 150°C (230°F to 302°F) 1.5 to 13 seconds Approximately 5 seconds/cycle (after heating) Input: 100 to 240 V AC, 50/60 ± 3 Hz; Output: 12 V DC, 12 W, 1 A 209 mm x 57 mm x 45 mm (8.25 x 2.25 x 1.8 inches) 0.7 kg (1.5 lbs)

Ordering Information

DESCRIPTION

AFL NO.

AFL PowerStrip Kit

S012808

Carrying case, fiber holder clamping system, blades and

centralizers for 125/250 µm and 125/900 µm fiber, power supply

230 V AC or 100/120 V AC, power cord 2 m (6.5 feet), cleaning

brush and tool set (hex keys, adjustment screwdriver)

Coating Blades

80/125 µm

S014859

80/160 µm

S012656

125/250 µm

S012596

125/400 µm

S012628

125/500 µm

S014865

125/900 µm

S012604

204/360 µm

S014734

220/350 µm

S017002

230/500 µm

S014863

250/400 µm

S014400

250/900 µm

S014866

290/450 µm

S014735

400/600 µm

S014719

500/615 µm

S017003

600/800 µm

S014736

660/800 µm

S017086

1000/1400 µm

S014737

Blade Removal Tool PowerStrip Blade Removal Tool

S012704

Centralizers 125 µm 160 µm 200 µm 250 µm 360 µm 400 µm 450 µm 500 µm 600 µm 680 µm 800 µm 900 µm 1400 µm
Power Supply 12 V DC W/PLUG ADPT * Custom blades and centralizers available on request.

S014860 S012652 S017889 S012600 S014738 S012624 S014739 S014864 S014718 S017009 S014740 S012608 S014741
S015185

AFLglobal.com | 800.235.3423

Specifications are subject to change without notice.

Strip, Clean & Fiber Prep

Fusion Splicing

High Tensile Stripper
The Fujikura high tensile stripper HTS-12 provides excellent strength performance when removing 250 µm and 400 µm buffer from optical fibers. Heating temperature and duration are fully adjustable for a variety of buffer materials. Self centering blades eliminate the need for an external guide and make replacement quick and easy. Designed for use with the FSM-40F/PM fiber holder system, the HTS-12 is an ideal solution for stripping when high strength fusion splices are a must.

Specifications
PARAMETER Applicable Fiber:
Cladding Diameter Coating Diameter Fiber Count Stripping Length Temperature Settings Heating Time Applicable Fiber Holders Power Supply Dimensions (W x D x H) Weight

VALUE
125 µm (80 µm optional with 160 µm coating) 250 µm (160 µm / 400 µm optional) Single 35 mm max 120º, 140º, 160º, or 180º C (adjustable) 3 seconds approximate FH-40 & FH-100 series 100 to 240 VAC (50 to 60 Hz) 140 x 60 x 60 (mm) / 5.51 x 2.36 x 2.36 (inches) 600 g / 1.3 lbs

Ordering Information
DESCRIPTION HTS-12 High Tensile Stripper w/ 250 µm Blades 80/160 µm Blade for HTS-12 125/400 µm Blade for HTS-12 125/250 µm Blade for HTS-12 ADC-08 AC Adapter ACC-09 AC Power Cord

AFL NO. S012094 S016841 S011946 S011942 S010996 S014390

AFLglobal.com | 800.235.3423

Specifications are subject to change without notice.

Fusion Splicing

Strip, Clean & Fiber Prep

Features
· Quick stripping A razorblade is applied to the fiber with specific tension and the coating is precisely planed along the fiber automatically. The process requires less time than the conventional methods of acid or heat. For a 125 µm fiber, 4 stripping passes at 90º rotational positions are typically required, and complete stripping is accomplished within 25 seconds. Larger fiber sizes require more stripping passes (at smaller rotational angle increments).
· Safe, high quality stripping Because hot acid is not used, the operation is much safer. In addition, the fiber quality degradation is kept at a minimum as the glass surface is not damaged by oxidization of the coating during burning or arcing.
· Flexible Many parameters, such as the razor blade position and stroke, and fiber rotation angle are all adjustable for various fiber sizes and coating materials.

PCS-100 Polyimide Coating Stripper
Polyimide coated optical fiber are now widely used in the oil and gas and medical industries. The polyimide coating has superior heat and chemical resistance to conventional UV curable coating material, but the coating requires additional care to remove. Dangerous chemical stripping using hot sulfuric acid or burning the coating off are common methods to strip the fiber due to the thin coating and strong coating adhesion to the fiber cladding. AFL's PCS-100 Polyimide Fiber Coating Stripper is the first tool that uses a mechanical stripping method, providing a safe, consistent and quick stripping solution.

Specifications

STRIPPING PERFORMANCE

Applicable Fiber

Silica based Single-mode and Multimode glass fiber

Fiber Count

Single

Applicable Coating

Polyimide coating and UV curable resin coating

Cladding Diameter Range

60 to 1200 m

Coating Diameter Range

60 to 1,500 m

Fiber Clamping

Adaptable to range of fiber/coating sizes by selection of applicable pair

of FH-100-XXX series fiber holders

Strip Length

1 to 35 mm (Window stripping: 1 to 33 mm)

Stripping Time

4 stripping passes: 20 seconds

8 stripping passes: 35 seconds

12 stripping passes: 50 seconds

Blade Life

350 fibers / blade (In the case of 4 strips per fiber)

Stripping Modes

30 user-programmable modes

Proof Modes

30 user-programmable modes

PROOF TEST FUNCTION

Maximum Proof Test Force

2 kgf

Typical Proof Test Cycle Time 3 seconds

DIMENSIONAL DATA

Dimensions

230 mm (W) x 214 mm (D) x 151 mm (H)

Weight

5.0 kg excluding AC adapter

POWER SOURCE

Power Input

AC100 to 240 V (50 Hz to 60 Hz)

OPERATION AND STORAGE CONDITIONS

Operating Conditions

Temperature: 0 to 40°C, Humidity: 0 to 95% RH (Non-condensing)

Storage Conditions

Temperature: -40 to 80°C, Humidity: 0 to 95% RH (Non-condensing)

Ordering Information
DESCRIPTION PCS-100 Polyimide Coating Stripper Includes: FH-100-150, ADC-15 AC Adapter, ACC-02, Instruction manual and PCB-01 replacement blades

AFL NO. S014973

Accessories
DESCRIPTION FH-100-150 ADC-15 ACC-02 PCB-01 (Box of 50)

AFL NO. S014861 S014826 S001171 S015018

AFLglobal.com | 800.235.3423

Specifications are subject to change without notice.

Fusion Splicing

Strip, Clean & Fiber Prep

Features
· Automatic cleaning main components in the machine are automatically cleaned allowing a continuous sequence of fiber preparation operations.
· Automatic residue collector coating residue and glass scraps are collected in separate containers.
· Alcohol circulation system alcohol for cleaning is circulated in a closed system enabling a lengthy refill-free operation.
· Diamond blade a diamond blade is used for cleaving in the tension method cleaving process and provides consistent cleave quality.
· Reliable stripping method contact of the stripping blade to the fiber is prevented using guides in conjunction with the blade, minimizing damage to fiber during the stripping process.
· Production-friendly design provides ergonomic, smooth and simple operation.

APM-101 and APM-102 Automatic Preparation Machine
The APM-101 and APM-102 provide fiber optic preparation automation for assembly operations in a factory environment. Both perform all the operational steps required to strip, clean and cleave the fiber, automatically and with high repeatability. This includes stripping the fiber without degrading fiber quality, cleaning fiber with alcohol to remove coating residue, and cleaving consistently at a right angle to the fiber axis. The entire process is complete in as little as 21 seconds.
The APM-101 is designed to accept the FH-100-250 fiber holder that is a component of Fujikura's FSM-100 series and LZM-100 splicing platforms. It can also accept the FH-40/45-250 fiber holder used with the FSM-40/45F and FSM-40/45PM splicing platforms. The APM-102 is designed to accept the FH-70-250 fiber holder used with Fujikura models 70S, 19S and 12S.

Specifications

PARAMETER

VALUE

Applicable fiber

Single-mode and Multimode glass fiber

Applicable cladding diameter 125 µm

Applicable coating

UV curable resin coating

Applicable coating diameter 250 µm

Fiber clamping for APM-101 FH-100-250 series or FH-70-250 fiber holder

Fiber clamping for APM-102 FH-70-250

Cleave length

3 to 10 mm

Cleave angle

Typical 0.5°

Operating time

Typical 23 seconds (in the case of 125 µm diameter fiber with

250 µm coating)

Daily maintenance

Typically every 150 cycles

Operation action

1 step (Press start button only)

Air pressure

4 bar

Operating Condition

0 to 40°C at 0 to 95% RH (non-dew)

Storage condition

-40 to 80°C at 0 to 95% RH (non-dew)

Dimensions

170W x 370D x 120 H (MM)

Weight

5.1 kg

Ordering Information

DESCRIPTION APM-101 Automatic Preparation Machine (requires FH-100-250 or FH-70-250 Fiber Holders) Includes: ADC-15 AC Adapter, ACC-02 Power Cord, ALC-01 Alcohol Container and REG-01 Air Pressure Regulator APM-102 Automatic Preparation Machine (requires FH-70-250 Fiber Holder) Includes: ADC-15 AC Adapter, ACC-02 Power Cord, ALC-01 Alcohol Container and REG-01 Air Pressure Regulator

AFL NO. S014974
S015904

Optional Accessories
DESCRIPTION ADC-15 AC Adapter ACC-02 AC Cord CSB-250 Coating Strip Blade CB-04A Cleaver Blade ALC-01 Alcohol Container REG-01 Air Pressure Regulator

AFL NO. S014826 S001171 S015029 S015030 S015026 S015028

AFLglobal.com | 800.235.3423

Specifications are subject to change without notice.

Strip, Clean & Fiber Prep

Included Accessories

Fusion Splicing

USC-03 Ultrasonic Cleaner
The Fujikura ultrasonic cleaner model USC-03 provides a simple and cost effective method for cleaning optical fibers when high strength fusion splices are required. This ultrasonic cleaner readily accepts all FH-40-XXX, FH-50-XXX, FH-70-XXX and FH-100-XXX series fiber holders. The Universal Fiber Holder Adapter, available as an optional accessory, enables the use of FH-XXX series fiber holders.
The high frequency ultrasonic action cleans debris and coating residue without damaging the exposed cladding and a built-in timer ensures that the required cleaning time is consistently used for all fibers processed. This cleaner, when used in conjunction with high strength stripping and cleaving accessories, produces outstanding results for the most demanding high strength applications.
Features · Built-in timer assures correct cleaning time · Adjustable high intensity vibratory cleaning action · Adjustment knob allows fine-tuning of fiber submersion depth · Alcohol bath lid prevents cleaning fluid evaporation when machine is idle

Specifications
PARAMETER Applicable Fibers Applicable Fiber Holders Recommended Fluid Tank Capacity Ultrasonic Frequency Fiber Cleaning Length Output Power Timer Range Power Requirement Operating Environment Storage Environment Dimensions (W x D x H) Weight

VALUE Single optical fiber FH-40, 50, 70 and 100 series 99% Ethyl alcohol or Isopropyl alcohol 43 - 53 cm^3 50 kHz 49 mm (max), adjustable 3.0 W (max) 1 to 99 seconds AC 100 to 240 V / 50 Hz to 60 Hz 0oC to 40oC, 0 to 95% RH, non-condensing -20°C to 60°C, non-condensing humidity 95 x 190 x 162 (mm) / 3.74 x 7.48 x 6.38 (inches) 1 kg / 2.2 lbs

Ordering Information
DESCRIPTION USC-03 Universal Fiber Holder Adapter ADC-10 Power Adapter ACC-09 Power Cord

AFL NO. S014783 S013568 S012548 S014390

AFLglobal.com | 800.235.3423

Specifications are subject to change without notice.

Optimization Services

Fusion Splicing
Optimization Services
With the constant introduction of new fiber types as well as the mixing of fiber types in opto-electronic devices such as optical amplifiers and sensors, splicer optimization is essential in minimizing splice loss and keeping splices physically robust. AFL provides an optimization service to determine the optimal settings for any combination of fiber types in any of our splicers. This process involves changing over 50 splicer machine parameters, ranging from splicer arc power to fiber movement rate. These parameters change significantly with fiber characteristics such as fiber diameter, refractive index profile, and dopant composition. In the FSM-45F/PM and FSM-100M/P fusion splicers, optimization plays an important role in maximizing the benefits of sweep arc technology, which minimizes the effects of differences in mode field diameters in a pair of fibers, thereby minimizing splice loss. Splicers also include loss estimation functions, a separate loss estimation optimization is performed to maximize the accuracy of the loss estimation function on the machine to provide the most accurate splice loss readings. All of the parameters can be easily downloaded into a fusion splicer once complete.
Please contact AFL for further information on specifications and ordering.

AFLglobal.com | 800.235.3423

Specifications are subject to change without notice.

Fusion Splicing Systems
AFLglobal.com | 800.235.3423 60

Please Contact your AFL Sales Rep for information about any of our other products or services.
TEST & INSPECTION

FOCIS Lightning®, FOCIS Duel® and FOCIS Flex Fiber Optic Connector Inspection System

FlexScan® OTDR
FIBER INSIDE PLANT

OPM5 Optical Power Meter and OLS4 Light Source

FUSEConnect® MPO, FC, SC, LC and ST Connectors

Poli-MOD® Patch and Splice Module

www.AFLglobal.com
CAT-01007 1.24.2022

Adobe InDesign 17.0 (Windows) Adobe PDF Library 16.0.3