Manuals+

EC700-ADN / EC710-ADN Fanless Embedded System

Intel® Processor N-series/Atom® Processor X Series Fanless Embedded System

Key Features

  • On Board OOB built-in: Hardware status remote control & monitor, BIOS remote setup/update, OS remote recovery, Open-SSH/ UEFI Shell/In-Band Windows support.
  • Slim and Fanless: Slim and fanless design for limited-space conditions.
  • Intel TCC: Supported by X series CPU and TSN standard up to 2.5GbE (Optional).
  • On Board DDR5 & eMMC Support: LPDDR5 4800 MHz memory down, eMMC module for easy maintenance.
  • Up to Quad Display Support: Support via HDMI/USB-C/VGA; Quad display support by device.

Panel: EC700-ADN

System Height: 33mm

Front View

Ports include: COM 1, COM 2, COM 3 (RS232/422/485), VGA, Power Button, LAN1/2 (2.5G), LAN3, USB-C, USB 3.2 Type A, Line out/COM 4/DIO, and antenna holes.

Rear View

Ports include: HDMI, USB 3.2 Type A, Antenna holes, LAN1/2 (2.5G), LAN3, USB-C, USB 3.2 Type A, Line out/COM 4/DIO, and antenna holes.

Panel: EC710-ADN

System Height: 43mm

Front View

Ports include: COM 1, COM 2, COM 3 (RS232/422/485), VGA, Power Button, LAN1/2 (2.5G), LAN3, USB-C, USB 3.2 Type A, Line out/COM 4/DIO, and antenna holes.

Rear View

Ports include: HDMI, USB 3.2 Type A, Antenna holes, LAN1/2 (2.5G), LAN3, USB-C, USB 3.2 Type A, Line out/COM 4/DIO, and antenna holes.

Block Diagram

The block diagram illustrates the system architecture based on the Intel Alder Lake-N platform, featuring LPDDR5 4800 MT/s memory. Key interfaces include multiple USB 3.2 ports (Type-A and Type-C), USB 2.0, PCIe/SATA 3.0, 2.5GbE and GbE Ethernet ports, HDMI, VGA, and DisplayPort via USB-C. Storage options include M.2 slots (M key for PCIe/SATA, E key for PCIe/CNVi) and eMMC. The system incorporates a TPM 2.0 module for security and a Super I/O controller for legacy interfaces like UART (RS232/422/485). On-board OOB (Out-of-Band) management is also indicated.

Dimensions and Mounting

EC700-ADN (System Height: 33mm)

Overall Dimensions: Width: 180mm, Height: 33mm, Depth: 127.8mm.

Mounting Options: Wall Mounting, VESA Mounting, DIN Rail Mounting. Specific kits are available.

EC710-ADN (System Height: 43mm)

Overall Dimensions: Width: 180mm, Height: 43mm, Depth: 127.8mm.

Mounting Options: Wall Mounting, VESA Mounting, DIN Rail Mounting. Specific kits are available.

Specifications

System

SpecificationEC700-ADNEC710-ADN
ProcessorIntel Alder Lake-N Series, Intel PC Client Series
Intel® Processor N50 (2 Cores, 1.0GHz-3.4GHz), N97 (4 Cores, 2.0GHz-2.9GHz), N200 (4 Cores, 1.0GHz-3.2GHz)
Intel® Embedded Series (Support TCC): Atom® X7211E (2 Cores, 1.0GHz-2.9GHz), X7213E (2 Cores, 1.7GHz-2.9GHz), X7425E (4 Cores, 1.5GHz-2.7GHz)
*TCC default disable in BIOS setting		Intel Alder Lake-N Series, Intel PC Client Series
Intel® Core™ i3-N305 (8 Cores, 1.0GHz-3.0GHz)
(TDP 15W by conditional support)
Memory8GB/16GB LPDDR5 4800 Memory Down8GB/16GB LPDDR5 4800 Memory Down
BIOSAMI SPI 256Mbit (supports UEFI boot only)AMI SPI 256Mbit (supports UEFI boot only)
Graphics Controller FeatureIntel® UHD Graphics, Execution Units: Up to 32 EUs
3D API: OpenGL 4.6, DirectX12, Vulkan 1.2 (Windows), Mesa 3D, OpenGL 4.6, Vulkan 1.2 (Linux)
Precision: FP32, FP16, INT8; Compute: OpenCL 3.0		Intel® UHD Graphics, Execution Units: Up to 32 EUs
3D API: OpenGL 4.6, DirectX12, Vulkan 1.2 (Windows), Mesa 3D, OpenGL 4.6, Vulkan 1.2 (Linux)
Precision: FP32, FP16, INT8; Compute: OpenCL 3.0
Display1 x VGA, 1 x HDMI 1.4, 1 x USB-C (DP1.2 Alt. Mode)1 x VGA, 1 x HDMI 1.4, 1 x USB-C (DP1.2 Alt. Mode)
Storage Internal1 x M.2 2280 M key (PCIe Gen3/SATA) *Heatsink & thermal pad required.
1 x M.2 2230 E key (USB 2.0/PCIe, support CNVi)
1 x M.2 3042/3052 B key: USB3.0/USB2.0/PCIe with SIM
1 x M.2 2242/2280 M key (*PCIe/SATA)		1 x M.2 2280 M key (PCIe Gen3/SATA) *Heatsink & thermal pad required.
1 x M.2 2230 E key (USB 2.0/PCIe, support CNVi)
1 x M.2 3042/3052 B key: USB3.0/USB2.0/PCIe with SIM
1 x M.2 2242/2280 M key (*PCIe/SATA)
Expansion InterfaceN/AN/A

Audio & Network

SpecificationEC700-ADNEC710-ADN
Audio CodecREALTEK ALC888SREALTEK ALC888S
Ethernet Controller2 x Intel Ethernet controller i226 2.5GbE (TSN support by project)
1 x Intel Ethernet controller i210 GbE (support DFI OOB function)		2 x Intel Ethernet controller i226 2.5GbE (TSN support by project)
1 x Intel Ethernet controller i210 GbE (support DFI OOB function)

I/O Ports

SpecificationEC700-ADNEC710-ADN
LED Indicators1 x Power LED, 1 x Storage LED1 x Power LED, 1 x Storage LED
Front I/O: SerialCOM 1/2: RS232/422/485, COM 3: RS232COM 1/2: RS232/422/485, COM 3: RS232
Front I/O: Antenna Hole2 x antenna holes2 x antenna holes
Front I/O: Display1 x VGA1 x VGA
Front I/O: Button1 x Power Button, 1 x Reset Button1 x Power Button, 1 x Reset Button
Rear I/O: Ethernet2 x 2.5GbE RJ45, 1 x GbE RJ45 (support DFI OOB)2 x 2.5GbE RJ45, 1 x GbE RJ45 (support DFI OOB)
Rear I/O: SerialCOM 4: RS232/DIOCOM 4: RS232/DIO
Rear I/O: USB3 x USB 3.2 type A, 1 x USB-C 3.23 x USB 3.2 type A, 1 x USB-C 3.2
Rear I/O: Display1 x HDMI1 x HDMI
Rear I/O: Audio1 x 3.5mm Line out/Mic In1 x 3.5mm Line out/Mic In
Rear I/O: Antenna Hole2 x antenna holes2 x antenna holes
Storage: MicroSD1 x MicroSD (Opt.)1 x MicroSD (Opt.)

System Management & Security

SpecificationEC700-ADNEC710-ADN
Watchdog Timer Output & IntervalSystem reset, programmable via software from 1 to 255 secondsSystem reset, programmable via software from 1 to 255 seconds
Security TPMTPM 2.0 SupportTPM 2.0 Support
Power TypeWide range 9~36VDCWide range 9~36VDC
Power RTC Battery ConnectorRTC battery CR2032, 2.5mm DC JackRTC battery CR2032, 2.5mm DC Jack
OS Support MicrosoftWindows® 10 IoT Enterprise, Windows® 11 IoT EnterpriseWindows® 10 IoT Enterprise, Windows® 11 IoT Enterprise
OS Support LinuxUbuntu 22.04Ubuntu 22.04

Ordering Information

ModelPart NumberSys HeightCPUMry. DownOperating Temp.I/ODisplayExpansionDFI OOB
EC700-ADN750-EC7004-000GX7425E16GB3 USB-A, 1 USB-C1 HDMI, 1 VGA, 1 DP 1.2 Alt. Mode via USB-C (auto detect)1 x M.2 M key: PCIe/SATAYes
750-EC7004-100G33mmX7211E8GB-5 to 60°C3 USB-A, 1 USB-C, 2 2.5GbE, 1 GbE, 2 RS232/422/485, 1 RS232, 1 RS232/DIO1 HDMI, 1 VGA, 1 DP 1.2 Alt. Mode via USB-C1 x M.2 B Key: USB3.0/USB2.0/PCIeYes
750-EC7004-700GN974GB4 USB-A1 HDMI, 1 VGA1 x M.2 E Key: USB2.0/PCIeN/A

*One more display output via USB-C by Opt.

Optional Items

  • Adapter: 60W 12V inlet C14, lockable DC Jack 5.5/2.5mm, cable length 1500mm.
  • Power Cord: US 3pin (1830mm), EU 2pin (1830mm), China 3pin (1830mm), JP 3pin (1830mm, with DFI PSE logo).
  • Mount Kits: EC700-ADN Din Rail Kit (33mm), EC700-ADN/EC710-ADN Wall mount Kit, EC700-ADN/EC710-ADN VESA mount Kit, EC710-ADN Din Rail Kit (43mm).
  • EMMC module: EMMC Board 64GB (-25°C ~ +85°C), EMMC Board 128GB (-25°C ~ +85°C).

Packing List

1 System unit

DFI reserves the right to change the specifications at any time prior to the product's release. Changes thereafter will be based on the product's revision. Please contact your sales representative for the exact revision offered in your area. All product names mentioned are trademarks of their respective companies.

Copyright © July 9, 2025 DFI Inc.

PDF preview unavailable. Download the PDF instead.

DFI EC700-ADN EC710-ADN Embedded System-Datasheet Adobe PDF Library 17.0 Adobe InDesign 19.5 (Windows)

Related Documents

PreviewDFI KIT-ADN Series Industrial Open Frame Panel PC Specifications
Detailed specifications for the DFI KIT-ADN Series Industrial Open Frame Panel PC, including features, dimensions, system, graphics, storage, expansion, audio, networking, I/O, power, security, and ordering information for the 10.1" and 12.1" models.
PreviewDFI EC700-ADN/EC710-ADN Fanless Embedded System User's Manual
User's manual for DFI's EC700-ADN and EC710-ADN fanless embedded systems, covering hardware installation, system configuration, BIOS settings, and advanced out-of-band management features for industrial applications.
PreviewDFI EC700-ADN/EC710-ADN Fanless Embedded System Quick Installation Guide
A quick installation guide for the DFI EC700-ADN and EC710-ADN fanless embedded systems, covering product overview, port descriptions, chassis removal, M.2 card installation, and antenna installation.
PreviewDFI KIT-ADN Series Industrial Open Frame Panel PC Specifications
Detailed specifications, features, dimensions, and ordering information for the DFI KIT-ADN Series Industrial Open Frame Panel PCs, including models KIT101P-ADN and KIT121P-ADN.
PreviewDFI VCX700-MTH Ruggedized Fanless In-Vehicle System Datasheet
Detailed datasheet for the DFI VCX700-MTH, a ruggedized fanless in-vehicle system powered by Intel Core Ultra processors. Features include IP67/IP69K rating, wide operating temperature range (-40°C to 70°C), versatile power input (9-36Vdc), 9-axis IMU sensor, and hybrid connectivity options.
PreviewDFI EC531-KH/EC532-KH: 7th Gen Intel Core Embedded System Datasheet
Comprehensive datasheet for DFI's EC531-KH and EC532-KH fanless embedded systems, featuring 7th Gen Intel Core processors, extensive I/O, and rugged design for industrial applications. Includes detailed specifications, ordering information, and mounting guides.
PreviewDFI EC510-KH/EC511-KH: 7th Gen Intel Core Modular Embedded System
DFI's EC510-KH/EC511-KH is a rugged, fanless embedded system powered by 7th Gen Intel Core processors. It supports up to 64GB DDR4 RAM, triple independent displays, and offers extensive I/O options including multiple COM ports, USB 3.0, GbE LAN, and PoE. Ideal for industrial applications with wide temperature and voltage support.
PreviewDFI WM130-RPS Wallmount Desktop Box IPC - 14th/13th/12th Gen Intel Core Processors
DFI WM130-RPS is a compact wallmount desktop box IPC supporting 14th, 13th, and 12th Gen Intel Core processors. Features include rich I/O, PCIe slot expansion, WiFi 6, and multiple storage options.