Dometic Front Blind FP 300

Product Components

Diagram shows the components of the Dometic Front Blind FP 300. Key parts include:

1. Main blind fabric and roller assembly
2. Side profile (x2)
3. Bottom profile
4. End cap
5. Mounting bracket (x6)
6. Top profile

Installation Steps

1. Attach mounting brackets (1) to the vehicle's A-pillar and dashboard area, using screws (2). A magnified view shows the precise placement of the bracket.

Diagram shows attaching mounting brackets to the dashboard and A-pillar, with a close-up of bracket placement.

2. Position the top profile (1) against the windshield header. Arrows indicate upward movement for placement.

Diagram shows the top profile being aligned with the top of the windshield, with arrows indicating upward motion.

3. Attach the side profiles (1) to the vehicle's A-pillars. A warning symbol [prohibited] with a screw indicates not to overtighten or use incorrect screws.

Diagram illustrates attaching side profiles to the A-pillars, with a caution symbol regarding screw usage.

4. Insert the blind assembly into the top profile (1). Then, attach the side profiles (2) to the previously installed mounting brackets (3).

Diagram shows the blind assembly being fitted into the top profile, followed by connecting the side profiles to the mounting brackets.

6. Secure the top profile (1) to the vehicle's interior, likely using screws (2) into mounting brackets (3). A magnified view shows the connection detail.

Diagram shows the top profile being screwed into place, with a close-up of the fastening mechanism.

7. Position and attach the blind assembly (1) to the side profiles (2). Arrows indicate the direction of connection.

Diagram illustrates connecting the main blind unit to the side profiles, with directional arrows.

8. Attach the side profiles (1) to the vehicle's A-pillars, possibly using screws (2) into mounting points. A magnified view shows the screw insertion.

Diagram shows side profiles being attached to the A-pillars, with a close-up of screw insertion.

9. Connect the blind assembly (1) to the side profiles (2 and 3). Arrows indicate the connection points.

Diagram shows the blind assembly being linked to the side profiles, highlighting connection points.

10. Attach the bottom profile (2) to the side profiles (5) to complete the blind structure.

Diagram shows the final connection of the bottom profile to the side profiles.

11. The blind is now fully extended [up arrow]. A warning symbol [prohibited] with upward arrows indicates a limit or restriction on blind operation or extension.

Diagram shows the extended blind and a warning symbol indicating a limit to its operation.