Callaway 8' x 7' Hitting Net Instructions

Key Components

• A. Hitting Target
• B. Base Sleeve
• C. White Securing Loops
• D. Base Poles (2)
• E. Side Base Frames (2)
• F. Top Frame Rod (2)
• G. Bottom Frame Rod (2)
• H. Side Sleeves (2)
• I. Sewn-in Tabs
• J. Black Threaded Cord
• K. Spring Loaded Holder
• L. Metal Stakes (4)

Includes: Callaway Carry Case

Assembly Instructions

Step 1

Lay the net flat on the ground with the longest Base Sleeve (B) closest to you (this is the bottom of the net). Ensure the White Securing Loops (C) are farthest away from you (this is the top of the net).

Connect the two Base Poles (D) by pushing the spring button in. Align the button with the hole and push until you hear a click.

Step 2

Slide the connected Base Poles (D) through the Base Sleeve (B).

Step 3

Attach the connected Base Poles (D) to the Side Base Frames (E).

Step 4

Create the Side Frame Poles by connecting the Top and Bottom Frame Rods (F & G). The top frame rods are distinguished by the silver notched end. Slide the black end of the Top Frame Rod (F) into the silver end of the Bottom Frame Rod (G).

Step 5

Take the connected side frame poles and slide them through the Side Sleeves (H). Secure them into the Side Base Frames (E). Ensure the silver notched end of the side frame pole is at the top of the net.

Step 6

Take a side frame pole by its silver notch and loop the White Securing Loops (C) at the top of the net around the notch on the top of the frame pole. Repeat this process on the other side.

Step 7 (Figure 1)

Attach the Hitting Target (A) to the net by locating the Sewn-in Tabs (I) at the top of the net. Run the Black Threaded Cord (J) through the Sewn-in Tab (I) on each side of the net. Then, loop the Black Threaded Cord (J) through the hole in the Spring Loaded Holder (K) to create a loop.

Step 8 (Figure 2)

For Outdoor Use Only: Secure the net to the ground by placing Metal Stakes (L) around the base and pushing them firmly into the ground. Repeat on the other side.