danfoss omr service manual – Manual Libs
TMK 200 FL. TYPE: 151F6216. 05 7. 151-2123.10. 151-2132.10. TMK 200 FL. HYDRAULIC MOTOR. MADE IN DENMARK. 151Z6216. N60940006. A. B. C. D. E. A: Type ...
MAKING MODERN LIVING POSSIBLE Orbital Motors Technical Information Seal Kits powersolutions.danfoss.com Technical Information Seal Kits for Orbital Motors Revision history Table of revisions Date Changed Rev July 2014 Converted to Danfoss layout CA January 2011 Small updates to tables BC May 2010 Japan location BA September 2007 AB July 2007 First edition AA 2 11020663 · Rev CA · July 2014 Technical Information Seal Kits for Orbital Motors Contents Special versions Seal kits for Orbital Motors Type OML, OMM, OMP, DH, OMR, OMR F, DS, DSW and OMH.........................................................................................5 Type OMEW, OMEW F, OMS, OMSS, OMS H, OMT, OMTS, OMT HD, OMT FL, OMT FH, OMT FK, OMV, OMVS and OMV HD..................................................................................................................................................................6 Type TMK, TMK FL, TMT, TMT FL, TMTW, and TMVW...........................................................................................................7 Name plate OML / OMM.........................................................................................................................................................................................8 OMP / OMR..........................................................................................................................................................................................8 OMH...................................................................................................................................................................................................... 9 OMEW................................................................................................................................................................................................... 9 OMH /OMS / OMT / OMV............................................................................................................................................................... 9 TMK / TMT / TMV............................................................................................................................................................................ 10 Consecutive motor code 11020663 · Rev CA · July 2014 3 Technical Information Seal Kits for Orbital Motors Special versions The list of seal kits cannot be used when ordering kits for special motor versions. In this respect, please contact the sales organisation for Danfoss. 4 11020663 · Rev CA · July 2014 Technical Information Seal Kits for Orbital Motors Seal kits for Orbital Motors Below a complete survey of code numbers for seal rings, full seal kits and O-rings (short motors) for standard motors. The survey applies to series that can be supplemented with spare parts. Type OML, OMM, OMP, DH, OMR, OMR F, DS, DSW and OMH Type OML, OMM, OMP, DH, OMR, OMR F, DS, DSW and OMH Seal kits survey Motor type Description Series Shaft versions OML OMM OMP DH OMR OMR F DS DSW OMH 16 mm, 5/8 in 0 16 mm, 5/8 in splined shaft 3 B 17 · 14 25 mm, 1 in, 6 1 in splined shaft 25 mm, 1 in 7 1 in spl. shaft, 28.5 mm tapered shaft 32 mm, 35 mm tapered shaft 6 and 7 25 mm, 1 in, 8 1 in splined shaft (HPS) 1 in, 1 in splined shaft 0 6B 1 in, 1 in splined shaft 1 6B 25 mm, 1 in, 4 1 in splined shaft 25 mm, 1 in, 5 1 in spl. shaft, 28.5 mm tapered shaft 32 mm, 35 mm tapered shaft 4 and 5 25 mm, 1 in, 6 1 in splined shaft (HPS) 25 mm, 1 in 5 1 in, 1 in splined shaft 0 6B 1 in, 1 in splined shaft 1 6B 11/4 in tapered shaft 0 32 mm, 35 mm, 1/4 in 0 11/4 in splined shaft, 35 mm tapered shaft Seal kits no. NBR 151G2201 151G0202 151-1154 151-1275 151-1279 151-1286 151-1273 151-1286 151-1159 151-1277 151-1166 151-1286 151-1287 151-1274 151-1286 11005765 151H1100 Production week (ww.yyyy) Series start Series stop 23. 1987 - 19. 1985 - 15. 1982 33. 1994 34. 1994 - 31. 1998 18. 1993 42. 1997 16. 1982 34. 1994 41. 1997 0 33. 1994 - - 31. 1998 34. 1994 18. 1993 42. 1997 01.2005 13. 1989 - - 41.1997 - - 11020663 · Rev CA · July 2014 5 Technical Information Seal Kits for Orbital Motors Seal kits for Orbital Motors Type OMEW, OMEW F, OMS, OMSS, OMS H, OMT, OMTS, OMT HD, OMT FL, OMT FH, OMT FK, OMV, OMVS and OMV HD Type OMEW, OMEW F, OMS, OMSS, OMS H, OMT, OMTS, OMT HD, OMT FL, OMT FH, OMT FK, OMV, OMVS and OMV HD Seal kits survey Motor type Description Shaft versions Series Seal kits no. NBR Production week (ww.yyyy) Series start Series stop OMEW 35 mm tapered shaft 1/4 in tapered shaft 0, 1 and 2 OMEW F 1/4 in tapered shaft 0 and 1 2 OMS 32 mm, 1in, 11/4 in, 1 1/4 2 and 3 in spl. shaft, 1 in spl. shaft, 35 mm tapered shaft, 1 1/4 in tap. shaft PTO-shaft 2 and 3 OMSS Seal kits 2 and 3 Kits set* - OMT 40 mm, 1 1/2 in, 1 1/4 in spl 2 shaft, 1in 45 mm tapered shaft, 1 3/4 in tap. shaft, PTO shaft OMTS Seal set 2 Kits set* 2 OMT HD Shaft seal NBR shore 90 2 Shaft seal NBR shore 70 2 OMT FX Wheel Flange 2 OMT FL OMT FH OMT FK 40, 1 1/2 in splined shaft 2 40, 1 1/2 in splined shaft 2 Wheel Flange 2 OMT FK Wheel Flange 2 OMV 50 mm, 2 1/4 in, 2 1/8 in spl 2 shaft, 60 mm tapered shaft, 2 1/4 in tapered shaft OMVS Seal kits 2 Kits set* OMV HD Shaft seal NBR shore 90 2 Shaft seal NBR shore 72 2 * O-ring for short motor 151H1101 151H1105 151H1106 151F0111 - 01. 2003 27. 2005 10. 1984 151F0117 151F0103 151F1033 151B0113 10. 1984 10. 1984 27. 1988 151B0114 151B1040 151B0161 151B1113 151B0152 151B0153 151B0154 151B0155 11050305 151B0129 27. 1988 27. 1988 27. 1988 27. 1988 49.1989 36.1990 16.1991 43.1991 25.2008 27. 1988 151B0125 151B1041 151B0162 151B1114 27. 1988 27. 1988 27. 1988 - 26. 2005 - - 24.2008 - - 6 11020663 · Rev CA · July 2014 Technical Information Seal Kits for Orbital Motors Seal kits for Orbital Motors Type TMK, TMK FL, TMT, TMT FL, TMTW, and TMVW Type TMK, TMK FL, TMT, TMT FL, TMTW, and TMVW Seal kits survey Motor type Description Series Shaft versions TMK 1 1/4 in, 1 1/4 in spl shaft, 1 0 1/4 in tap. shaft, 1 1/2 in tap. shaft, 1 5/8 in tapered shaft TMK FL 1 1/2 in tapered shaft 0 TMT / TMTU TMT FL TMTW 40 mm, 1 1/2 in, 45 mm 0 tapered shaft, 1 3/4 in tapered shaft 1 1/2 in tapered shaft, 45 mm 0 tapered shaft Thread hole flange 0 TMVW Thread hole flange with 0 standard shaft seal Seal kits no. NBR 151F0141 Production week (ww.yyyy) Series start Series stop 02. 2003 - 151F0142 02. 2003 - 151B0176 49. 1999 - 151Z2059 49. 1999 - 151Z2072 49. 1999 - 151Z7080 39. 2002 - 11020663 · Rev CA · July 2014 7 Technical Information Seal Kits for Orbital Motors Name plate Old name plate: · O = Series 0 · 1 = Series 1 · 2 = Series 2, etc New name plate: · Position D: See Consecutive Motor Code OML / OMM MADE IN DENMARK 151-2115.10 HYDRAULIC MOTOR A OMM 32 151G0003 B C N60940006 D MADE IN DENMARK E 151-2125.10 OMP / OMR O MP 20 32 151G0003 3 151-2116.10 MADE IN DENMARK 7 3 3 31 0 U 1 5 1- 151-2117.11 1O5M1P-0331752 144108N047C MADE IN DENMARK 151-2118.11 0411 MADE IN DENMARK 151-3331 N60940001 C B D A E OMP 200 151-2126.10 MADE IN DENMARK A HYDRAULIC MOTOR OMP 315 B 151-0372 D C N60940004 E 151-2127.10 8 11020663 · Rev CA · July 2014 Technical Information Seal Kits for Orbital Motors Name plate OMH 0411 OMEW O MH 31 MADE IN DENMARK 10 04 5U 1 5 1H 151-2119.11 0421 MADE IN DENMARK HYDRAULIC MOTOR OMEW 200 151H2005 CW 151-2134.10 OMH /OMS / OMT / OMV MADE IN DENMARK HYDRAULIC MOTOR 151H2043 OMEW200 CCW 151-2120.11 MADE IN DENMARK HYDRAULIC MOTOR OMSW 160 151F0531-3 312803N025F 151-2121.11 MADE IN DENMARK 151H1004 N60940001 C B D A E O MH 315 151-2128.10 MADE IN DENMARK A HYDRAULIC MOTOR OMEW 200 B 151H2043 D C N60940004 E 151-2129.10 MADE IN DENMARK A HYDRAULIC MOTOR OMSW 160 B 151F0531 C D N60940005 E 151-2130.10 11020663 · Rev CA · July 2014 9 Technical Information Seal Kits for Orbital Motors Name plate 0407 TMK / TMT / TMV MADE IN DENMARK OMV 500 151B3102 2 151-2122.11 0407 MADE IN DENMARK TMT 500 151Z3010 151-2124.11 MADE IN DENMARK 05 7 TMK 200 FL TYPE: 151F6216 151-2123.10 MADE IN DENMARK A HYDRAULIC MOTOR TMT 500 B 151Z3010 C N60940005 D E 151-2131.10 HYDRAULIC MOTOR A TMK 200 FL 151Z6216 B C N60940006 D MADE IN DENMARK E 151-2132.10 A: Type designation B: Code number (text form) C: Code number (bar code 39) D: Consecutive number (text form) incl. date of manufacturing E: Consecutive number (bar code 39) 10 11020663 · Rev CA · July 2014 Technical Information Seal Kits for Orbital Motors Consecutive motor code 1 X 1 2 X XX Digits: 1 4 9 X XXXX Consecutive number four digit number Day 1 - 7 (1 = Monday, 2 = Tuesday, etc) Week week: 00 - 53 Date of production Year 0 - 9 (6 = 2006, 7 = 2007, etc) Location N: Nordborg or L: Lawrence 11020663 · Rev CA · July 2014 11 Products we offer: · Bent Axis Motors · Closed Circuit Axial Piston Pumps and Motors · Displays · Electrohydraulic Power Steering · Electrohydraulics · Hydraulic Power Steering · Integrated Systems · Joysticks and Control Handles · Microcontrollers and Software · Open Circuit Axial Piston Pumps · Orbital Motors · PLUS+1® GUIDE · Proportional Valves · Sensors · Steering · Transit Mixer Drives Danfoss Power Solutions is a global manufacturer and supplier of high-quality hydraulic and electronic components. We specialize in providing state-of-the-art technology and solutions that excel in the harsh operating conditions of the mobile off-highway market. Building on our extensive applications expertise, we work closely with our customers to ensure exceptional performance for a broad range of off-highway vehicles. We help OEMs around the world speed up system development, reduce costs and bring vehicles to market faster. Danfoss Your Strongest Partner in Mobile Hydraulics. Go to www.powersolutions.danfoss.com for further product information. Wherever off-highway vehicles are at work, so is Danfoss. We offer expert worldwide support for our customers, ensuring the best possible solutions for outstanding performance. And with an extensive network of Global Service Partners, we also provide comprehensive global service for all of our components. Please contact the Danfoss Power Solution representative nearest you. Comatrol www.comatrol.com Schwarzmüller-Inverter www.schwarzmuellerinverter.com Turolla www.turollaocg.com Valmova www.valmova.com Hydro-Gear www.hydro-gear.com Daikin-Sauer-Danfoss www.daikin-sauer-danfoss.com Local address: Danfoss Power Solutions US Company 2800 East 13th Street Ames, IA 50010, USA Phone: +1 515 239 6000 Danfoss Power Solutions GmbH & Co. OHG Krokamp 35 D-24539 Neumünster, Germany Phone: +49 4321 871 0 Danfoss Power Solutions ApS Nordborgvej 81 DK-6430 Nordborg, Denmark Phone: +45 7488 2222 Danfoss Power Solutions (Shanghai) Co., Ltd. Building #22, No. 1000 Jin Hai Rd Jin Qiao, Pudong New District Shanghai, China 201206 Phone: +86 21 3418 5200 Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its products without notice. This also applies to products already on order provided that such alterations can be made without changes being necessary in specifications already agreed.. All trademarks in this material are property of the respective companies. Danfoss and the Danfoss logotype are trademarks of Danfoss A/S. All rights reserved. 11020663 · Rev CA · July 2014 www.danfoss.com © Danfoss A/S, 2014Antenna House PDF Output Library 6.1.438 (Windows (x64)); modified using iTextSharp™ 5.5.3 ©2000-2014 iText Group NV (AGPL-version)