1 Overview
Thank you for choosing our waterless essential oil aroma diffuser. With the latest cold diffusion technology, it converts essential oil into nano vapor to approximately 1-3 microns without using heat or water. The diffusing process does not damage the molecular structure, therefore maintaining its therapeutic properties for easier absorption into the body. It is easier, more hygienic and safer. We make it compact enough for you to fit it into your car cup holders so that you may take it with you wherever you go.
As it is compatible with the majority of essential oil bottles available, it gives you the freedom to choose from a wide range of fragrances that soothe you, relax you, or refresh you in a variety of situations. Using it with sanitizing essential oils can improve unpleasant odors and help purify the air around it.
2 Cautions
⚠️ DO NOT invert or tilt the device once the oil bottle is installed.
DO NOT use it with camphor tree oil.
DO NOT attempt to disassemble the device.
For more quiet use, ensure the unit is 3 feet away.
Keep the device away from children and pets.
The more concentrated the oil, the less diffusing ability.
If you do not plan to use this device for an extended period of time, please store the device and the nozzle separately.
Working Temperature: 4º−104ºF / 0 – 40°C
Suggested room size: 300-500 sq. ft.
Device Orientation:
- Inverted: ❌
- Tilted: ❌
- Correct: ✅
3 What's in the Box
The package includes the following items:
- Diffuser
- Nozzle
- Charging Cable (USB-C)
- Standard Oil Bottle (20ml)
- Spare Kit (includes atomizers for 5ml, 10ml, and 15ml oil bottles)
4 Touch Button and Info Display
The display will turn off after 30 seconds if no buttons are touched. You may tap any button to wake up the display.
Power Button: Press & hold for approximately 1 second to turn it on/off.
Device Controls and Indicators:
- 1 Nozzle: The part where the vapor is emitted.
- 2 Battery Indicator: Shows the battery level.
- 3 3-Level Mist Control: Tap to set mist level. Long press to turn the ambient light on/off.
- 4 Ambient Light Indicator: Shows the status of the ambient light.
- 5 Orange Ambient Light: The device features an ambient light.
- 6 Timer Settings: Available in 1, 2, 4, or 6-hour intervals. Tap to choose the timer. When the set time is finished, the diffuser will automatically turn off. Press and hold the power button to turn it on again.
Mist Level Explained
- Level 1: 15 seconds of diffusing, followed by a pause of 165 seconds.
- Level 2: 1 minute of diffusing, followed by a pause of 2 minutes.
- Level 3: 1 minute of diffusing, followed by a pause of 1 minute.
Indicator Lights:
- Ambient light on: Indicates the ambient light is active.
- Low battery alert: Indicates the battery is low.
5 Bottle Installation
The device is compatible with 5ml, 10ml, 15ml, and 20ml essential oil bottles.
Removal:
Push from the top and lift your finger until you hear a "tick" sound. The nozzle will stick out. You may then simply pull it out to change or install a bottle of essential oil.
Installation:
Screw the essential oil bottle onto the nozzle, and then push the nozzle into the device until you hear a "tick" sound. To ensure proper installation, look for the "▲▼" alignment sign before pushing the nozzle.
6 Charging
Normal charging time is 3-5 hours. If the charging current is below 1A, it may take longer to fully charge the device.
You can charge the device using a 5V adapter, a PC/MAC USB port, or a USB interface within your vehicle. Please ensure the use of safety-certified charging accessories.
Charging Methods:
- [Computer USB port] PC/MAC USB port
- [Car USB port] Car USB port
- [Wall Adapter] Adapter
The battery indicator blinks green during charging and stays solid green once charging is finished.
As charging cycles increase, the battery life will gradually decrease.
7 Specifications
Dimensions:
- Width: 73mm
- Height: 122mm
Technical Details:
- Max. Oil Capacity: 20ml
- Input: DC-5V/1A
- Rated Power: 1.5W
- Battery Capacity: 2000mAh
- Net Weight: 300g
8 FAQ
Q1: How to select the right essential oil?
Use 100% pure essential oils. Resin and thick oils are not recommended. Camphor tree and eaglewood oils are prohibited.
Q2: When I change to a new oil, there is a mixed smell coming from my previous oil. How do I clean the nozzle and the bottle?
Fill the empty bottle with 5ml of 99% ethyl/ethanol alcohol. Shake to fully rinse the inner surface of the bottle and then empty it. Refill with another 5ml of ethyl/ethanol alcohol, and then run the device until the alcohol runs out.
Q3: I feel like it stops running sometimes, what has happened?
Please refer to section 4 for 'mist level explained'. The device is able to automatically optimize atomizing/pausing according to the mist level.
Q4: How long does it take to fully charge the device?
Normally 3-5 hours.
