Intelligent Visual Ear Spoon
Welcome to purchase this product. Please read the manual carefully before use. Thank you.
Product Usage Steps
- Download the app before use.
- Long press the power button on the ear spoon for 2 seconds to start the ear spoon.
- Open the app and click to enter WiFi.
- Mobile Connection Product WiFi "earpick_xxx".
- After returning to the app, click the button below to use it.
Product Parameters
| Product Name | Intelligent visual ear spoon |
|---|---|
| Network standards | IEEE 802.11b/g/n |
| Working frequency | 2.4Ghz |
| Image transmission rate | 30fps |
| Image sensor | CMOS |
| Working environment temperature | -10-50°C |
| Input parameter | DC 5V 0.4A |
| Working voltage | 3.7V-4.2V |
| Working power | 0.75W |
| Optimal focal length | 0.4-2cm |
| Gyroscope | Universal gyroscope |
Troubleshooting
| Fault | Solution |
|---|---|
| After connecting the ear spoon WiFi, the app does not display a picture or shows a black screen. | Turn off the 4G/5G network on your phone, fully charge the earpiece, restart it, and then connect again. |
| The camera light does not light up after startup. | Restart the ear spoon after charging before use. |
| Unable to search for ear spoon WiFi. | Please confirm if the earpiece is turned on and refresh the WiFi list. |
| The indicator light does not light up during charging. | Please try changing the charging cable. |
| Display network refusal to join when connecting to WiFi. | Restart the earphone before connecting, only one phone is allowed to connect to the earphone WiFi. |
| Does the iOS phone pop up after entering the app, allowing this app to use wireless data? | Please select "Wireless Local Area Network and Cellular Network". |
| The Android phone pop-up box indicates that the current WLAN cannot access the Internet normally. Do you want to disconnect/switch the auxiliary connection of the data network? | Please do not switch the earpiece WiFi and select "Keep Connected". |
| Apple phone does not display images when connected to device hotspots. | Please open the local network of this app in the settings. |
If the above operation does not solve the problem, please contact our online customer service, and we will further provide you with practical and feasible solutions.
Matters Needing Attention
- The temperature of the product will slightly increase during use (up to 38° C), which has no impact on the human body. Please use with confidence.
- When cleaning the lens, it is recommended to use a cotton swab to wipe it carefully.
- Please observe the surroundings before use and do not use the product in an environment where people are running.
- This product is not suitable for children under 3 years old.
- Children are prohibited from using this product alone to avoid accidental injury.
- Do not use the host body in liquid to avoid damage caused by immersion in water.
FCC Caution
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.