Bosch Refrigerator Installation Guide
Introduction
This guide provides detailed instructions for the installation of a Bosch refrigerator. Please follow these steps carefully to ensure proper setup and operation.
Tools Required
- Spirit level ?
- Wrench (SW27) ?
- Torx T20 Screwdriver ?
- Hand truck with weight ?⚖️
Ensure all parts are present before starting. Scissors [scissors emoji] may be used to open packaging.
Dimensions and Clearances
The refrigerator has the following approximate dimensions:
- Height: 1830 mm
- Width: 905 mm
- Depth: 610 mm
Maintain the following minimum clearances for proper ventilation and operation:
- Rear clearance: ≥ 30 mm
- Side clearance: ≥ 25 mm
Ensure the appliance is positioned correctly within the allocated space, respecting these dimensions.
Door Opening and Part Number
The appliance dimensions allow for a top view width of 1383 mm, with 45 mm from the front and 239 mm from the back. The height is 1102 mm.
Doors can open to 90° and up to 118°. Ensure sufficient space is available for full door opening. Incorrect door opening or placement is indicated by [cross emoji] ❌, while correct is indicated by [check emoji] ✔️.
A specific part number identified is № 10012733.
Installation Steps
Follow these sequential steps for assembly:
- Attach mounting brackets or runners to the appliance and/or cabinet using the provided screws. Use a Torx T20 screwdriver. [screwdriver emoji] [screw emoji]
- Slide the appliance or its components into the designated position. Ensure smooth movement.
- Securely fasten all attached parts.
- Connect any necessary internal components or guides as shown in the diagrams.
- Ensure all connections are firm and correctly seated.
Leveling the Appliance
Proper leveling is crucial for appliance stability and door function. Use a spirit level to check:
- Horizontal alignment: Ensure the appliance is level from side to side.
- Vertical alignment: Ensure the appliance is level from front to back.
Adjust the leveling feet at the base of the appliance using the SW27 wrench until the appliance is perfectly stable and level. [wrench emoji] [level emoji]
Incorrect leveling (indicated by [cross emoji] ❌) can lead to issues, while correct leveling (indicated by [check emoji] ✔️) ensures proper operation.
Door Adjustment
Adjust the doors to ensure they align correctly and close properly. Check for proper alignment, ensuring no overlap (indicated by [cross emoji] ❌) and correct positioning (indicated by [check emoji] ✔️).
Specific adjustments may involve setting door angles between 15° and 60°. Use the Torx T20 screwdriver for fine-tuning. [screwdriver emoji]
Follow the numbered sequence (1-2-3) for adjustments, paying attention to measurements like 1.6 mm for precise alignment.
Ensure doors open smoothly and close securely after adjustment.
Power Connection
Connect the power cord to the appliance. Ensure the plug is inserted correctly into the socket. Correct connection is indicated by [check emoji] ✔️, while incorrect insertion is indicated by [cross emoji] ❌.
Secure the power cord as shown in the diagrams to prevent strain or damage.
