User Guide for Omnisense models including: 93272OM Joystick Controller, 93272OM, Joystick Controller
Omnisense Joystick Controller
File Info : application/pdf, 2 Pages, 156.40KB
DocumentDocument1. What's in the box Joystick Controller Joystick Controller Mounting Decal 2.17in (55mm) 2.13in (54mm) 0.24in (6mm) diameter 2.2in (56mm) Cutout area 2.6 in (66mm) Mounting Decal 2. Installation The Joystick Controller must be panel mounted. When correctly installed, the top side (front) of the Joystick Controller is waterproof and suitable for open deck installation. When mounting the Joystick Controller, select a location that provides the best ergonomics for controller operation. The housing of the Joystick Controller is designed to provide a stable grip while your thumb or finger moves the knob. 1. The Joystick Controller has a flush back that can be easily fitted onto any flat surface. Select a suitable location close to your Multi-function Display (MFD)/Monitor. 2. Using the Joystick Controller Mounting Decal provided, mark and cut out the space to mount the Joystick Controller. 3. Drill the 0.24in (6mm) holes required for attaching the Joystick Controller. 4. Mount the Joystick Controller and use the bolts provided to secure it in place. 6.56ft (2m) Cable 2 X (M5 X 40) studs, washers, spring washers and nuts 3. Connecting the cable Connect one end of the Joystick Controller Cable to the [Controller] port in the Junction Box and the other end to the Joystick Controller. 4. Connecting the Joystick Controller To connect your Joystick Controller, launch the User Interface (UI). Proceed to Settings > Controller and select [Scan]. The system will automatically scan for a Joystick Controller connected to the Junction Box. Once the Joystick Controller is found, the serial number will be displayed. Select to connect the Joystick Controller and it will be ready for use. If the system is unable to locate the Joystick Controller, perform a factory reset to the Joystick Controller by holding down the and button simultaneously for 10 seconds. Upon completing the reset, select again to connect the Joystick Controller. 5. Control buttons Display controls are accessible by pressing the respective buttons on the Joystick Controller. To access a setting/function, press the button marked with the corresponding icon. Use the joystick to select and cycle through the options available. To wake the camera from Standby mode, press and hold the Power/Standby button. Joystick Menu navigation and camera control Enter Confirm selection Menu Display menu options Zoom Adjust zoom Sensor Select Toggle between cameras Function Programmable key Color Palette Select color mode Radar Track Activate tracking functions Power/Standby Wake, park, or return turret to home position 6. Joystick Controller icon description Below is the description of each icon for further understanding. Joystick · Move to navigate through menu items · Adjust Zoom/Focus, Brightness & Contrast level · Control camera movement (Pan & tilt) Enter · Press to confirm a selection Function · Programmable Shortcut Key (Choose from Home, NUC, Standby, Radar) · Press to activate shortcut function Menu · Press to display available options · Press to return to previous menu Color Palette · Press to open Color Palette · Choose from six different color modes Zoom · Press to activate Zoom Slider · Press to toggle between zoom levels Radar Track · Press to open Radar Track settings · Press to activate radar tracking function · Press to toggle between Day and Thermal Sensor Select camera (Not available for Ulysses Micro) Power/Standby · Press to open Power/Standby settings · Select [Home] to return turret to preset home position · Select [Standby] to park and stow turret · Press & hold to wake turret from parked position Accessing more information For more information, please refer to the user manual that has been shipped with your camera or visit omnisense-systems.com to download the latest user manual. Singapore 8 Penjuru Lane, Singapore 609189 T: +65 6844 3191 United States 1881 West State Road 84, Bldg. 1 Unit 102, Fort Lauderdale, Florida 33315, United States T: +1 (954) 316-6230 omnisense-systems.com