L150G L180G L220G Product Brochure T4 English 2010 12
L150G L180G L220G Product Brochure T4 English Wheel Loader 21A1006521
L150G, L180G, L220G, Product, Brochure, T4, English, Wheel, Loader, 21A1006521
VolvoCE
ProductBrochure L150G L180G L220G EN 21A1006521 201011 VOLVO WHEEL LOADERS
l150g, l180g, l220g
23,6 32,8 t 300 371 hp
1
A passion for performance.
At Volvo Construction Equipment, we're not just coming along for the ride. Developing products and services that raise productivity we are confident we can lower costs and increase profits for industry experts. Part of the Volvo Group, we are passionate about innovative solutions to help you work smarter not harder.
Helping you to do more Doing more with less is a trademark of Volvo Construction Equipment. High productivity has long been married to low energy consumption, ease of use and durability. When it comes to lowering life-cycle costs, Volvo is in a class of its own.
Designed to fit your needs There is a lot riding on creating solutions that are suited to the particular needs of different industry applications. Innovation often involves high technology but it doesn't always have to. Some of our best ideas have been simple, based on a clear and deep understanding of our customers' working lives.
You learn a lot in 175 years Over the years, Volvo has advanced solutions that have revolutionized the use of construction equipment. No other name speaks Safety louder than Volvo. Protecting operators, those around them and minimizing our environmental impact are traditional values that continue to shape our product design philosophy.
We're on your side We back the Volvo brand with the best people. Volvo is truly a global enterprise, one that is on standby to support customers quickly and efficiently wherever they are.
We have a passion for performance.
Volvo Trucks
Renault Trucks
Mack Trucks
2
UD Trucks
Volvo Buses Volvo Construction Equipment
Volvo Penta
Volvo Aero
Volvo Financial Services
Loaded, to lift up your profits.
Enter the cab to see and feel what makes the Volvo Care Cab a legend in comfort. Visibility is excellent to the rear and to the bucket edge. Operator controls are in ergonomically positions. Breathe and work at ease in clean, quiet comfort. It's loaded with features to keep your extended focus on profit-enhancing productivity.
Volvo Care Cab
The Volvo Care Cab provides the industry standard for operator comfort and safety. It's spacious, with plenty of foot, leg and personal space. The Volvo Care Cab applies to ROPS/FOPS standards.
4
Air Filter
Breathe easier with the best cab air climate in the industry. The well placed cab air intake is placed high up to stay away from dusty air from the tires. The easy-to-replace pre-filter separates out course particles. Then 90% of the cab air is circulated through the main filter, resulting in very clean air.
Excellent visibility
See it all and do it all in your Volvo wheel loader. Wide windows and narrow cab columns put you in command with clear, all-around visibility. Very good view to the attachment/ corners. Improves comfort and jobsite safety, for greater productivity.
Noise reduction
Noise and vibration dampening make for a low interior cab sound level.
Electro hydraulic servo controls
The servo controls are mounted on the operator seat, for consistent positioning in relation to seat movements and jostles. The high quality servo controls includes for the operator easy individual settings by push button features like return to dig, boom & tilt detent and end dampening from inside the cab. Relaxed operation and comfort.
Climate control comfort
Volvo's high sufficient climate control allows the operator to have nice cab temperature no matter the weather conditions. Select between the standard Automatic Heat Control (AHC) or optional Air Conditioning (AC). A comfortable operator is a more productive operator.
5
Carry the load every day.
Volvo gives you all the power you need. But the true Volvo edge comes from the combination of power with efficiency, durability throughout and, above all, profitability. That's how Volvo wheel loaders help you do more every day.
Automatic Power Shift
Automatic Power Shift (APS) operates in the ideal gear by sensing engine/ travel speed, kick down, engine braking and more. Select FAPS (fully automatic) to eliminate need for manual 1st gear kick down shifting. Results in more efficient work cycles with less wear and lower fuel consumption.
Durable TP linkage
Volvo's patented Torque Parallel linkage delivers high breakout torque throughout the entire range, including the highest lift position. Ideal for log handling. Also provides very good parallel movement. The standard double sealed pins and bushings are designed to withstand the toughest working environments for demanding customers.
Engine performance The new 13 liter 6 cylinder high performance, low fuel consumption turbocharged diesel engine equipped with the cooled exhaust recirculation particle filter makes the Volvo engine very reliable thanks to high torque at low engine speeds.
6
Load-sensing hydraulics Uses variable-flow, axial piston pumps for superior control of the load and attachments. High breakout force. Faster lift and tilt functions for shorter cycle times. High capacity pumps deliver reliability, high performance/productivity and low fuel consumption.
7
Designed for performance.
They only judge you on what you get done. That's why Volvo L150G, L180G and L220G loaders are built to help you do more. It's where heavy-duty design meets nimble efficiency, better response and faster cycles. Meet and exceed demand in demanding conditions day after day, year after year.
Drive line lock-up
To prevent power loss in the torque converter, the pump rotor and turbine rotor on the torque converter lock together through a direct drive clutch. Improves drive response, rimpull performance and fuel efficiency. Better incline climbing performance and faster cycles in load & carry operations.
Heavy duty axles
Volvo axles are the heavy-duty, axle wet brake type. The axle housings absorb all the machine/load weight distribution, allowing the axle shafts to only transmit torque to the planetary hub reductions. Reduced working stresses for longer service life.
Reverse By Brake/OptiShift The unique Volvo-patented Reverse By Brake (RBB) applies the standard service brake instead of the torque converter. Less loading stress on the torque converter and transmission. More fuel efficiency and deceleration comfort. Ideal for short cycle or truck loading. OptiShift includes the torque converter with Lock-Up and Reverse By Brake. Improves loading cycles, incline climbing performance, fuel efficiency and comfort, including during deceleration.
8
Volvo purpose-built drivetrain Volvo delivers a perfectly optimized, purpose-built drivetrain built by Volvo to work together. Includes Volvo engine, transmission and axles, well matched to the hydraulic and steering system. This harmony delivers lower fuel consumption and better engine response, even at lower RPM.
9
Spend more time working.
Variable Geometry Turbocharger
Volvo´s new VGT features the engine coolant continuously cooling the turbocharger bearing housing. Heat reduction is a proactive way to ensure good oil quality, long turbo life and minimum downtime. The VGT is designed to continually vary the airflow into the engine contributing to excellent engine response across the entire engine speed range.
Contronics
Volvo Contronics is a computerized machine electronics and monitoring system. Continuously monitors the machine, operation and performance in real time. Provides diagnostic functions and information needed for optimal operation. Fast, easy electronic level checks. More uptime each day.
Axle cradles
Maintenance-free, casted axle cradles. Rearaxle bridge connects the axle to the frame. Includes two, grease-lubricated-for- life roller bearings. Front bridge includes two oil bath, pre-filled-for-life bushings. Minimizes forces on the axle. Helps to maintain a low center of gravity.
Battery disconnect switch
The battery disconnect switch is safely and conveniently located directly under the battery box located at the left hand side cab ladder. Quick and easy power disconnect. Saves time, money and safety concerns when service is needed or to prevent battery discharge during long shutdown periods.
10
The faster you can get working each day, the more you'll do and the more you'll earn. That's why Volvo wheel loaders are built with quick and easy service access, advanced monitoring and more safety. With more maintenance-free parts and components you get more worryfree reliability.
Engine hood design
Newly-designed engine hood can be electronically opened backwards. Easy opening and closing with a wide open position angle. Excellent access for fast and easy service/cleaning. Provides improved ventilation of the engine compartment.
11
Smart load sense.
Contronics Computerized, real-time machine diagnostics and monitoring system.
Engine hood access New electronically-opening design for ideal access and ventilation.
Care Cab
ROPS/FOPS tested roomy cab with ideally placed controls and excellent operator visibility.
Load-sensing hydraulics Variable-flow, axial piston pumps for superior control and high breakout force.
Eco-friendly Low fuel consumption and Tier 4 Interim/ Stage IIIB-compliant emissions.
Volvo Power 13 liter 6 cylinder water cooled turbo engine for low fuel consumption. Dependable power with high torque at low RPM, cooled exhaust recirculation and active regeneration.
12
Servo controls
Mounted on the operator seat for comfortable operation and control.
CareTrack* CareTrack is the Volvo telematics system. It is equipped as standard on this machine and is designed to provide information to help improve productivity and efficiency.
Eco pedal Mechanical counter pressure encourages fuel-saving ease with the accelerator pedal.
TP linkage Excellent link geometry for high breakout torque along with very good parallel movement.
OptiShift
Includes the torque converter with Lock-Up and Reverse By Brake. For lower fuel consumption in most applications
Heavy-duty axles Absorb the weight for optimal torque, reduced stresses and longer life.
* In markets where CareTrack is available
13
Hard at work, not on the planet.
A lean, green machine The environmentally-friendly Volvo engine delivers a low noise level, for more comfort inside and outside the machine. Electronic fuel injection achieves optimized power, yet low fuel consumption. 14
Looking out for the environment is everyone's concern. It is a core value of Volvo and built into every one of our machines. This commitment helps you work hard, but not at the expense of our planet. Lower emissions, noise and fuel usage. That's Volvo.
Accelerator eco pedal
The accelerator pedal applies an appropriate amount of mechanical counter pressure (push back) to encourage the operator to engage the pedal with ease. This economical pedal feature helps avoid unnecessarily excessive fuel use. Provides lower fuel consumption.
Diesel Particulate Filter with regeneration
The active-type Diesel Particulate Filter (DPF) includes a Diesel Oxidation Catalyst function and regeneration burner. The system temporarily holds the exhaust and then incinerates it, further reducing hydrocarbon/ carbon emissions. Process results in no loss of operation or performance..
V-ACT Volvo V-ACT engine
The Volvo V-ACT engine is environmentally responsible with low emission levels that meet Tier 4 Interim/Stage IIIB requirements. More peace of mind when working in sensitive environments. Provides the ability to derive high torque performance while working more efficiently at low engine speeds.
15
Connect and go.
All genuine Volvo attachments are purpose-built with the same quality as the rest of the machine. They're designed as an integrated part of the wheel loader for which they were intended, their functions and properties perfectly matched to parameters such as link-arm geometry and breakout, rim pull and lifting force. That's why the machine and attachment work in perfect harmony, forming a dependable cohesive unit to get the job done safely and efficiently.
Rehandling buckets increase fuel efficiency:
Spill guard for less spillage
Optimized shape for rehandling gives faster, more efficient bucket fill and up to 10 % better fuel efficiency
Side cutters in line with bucket sides and optimised shape of wear plate for longer service life
Fewer pockets where material get stuck
Available with optional Bolt-on edge (BOE), made of HB500 steel
Wear plates and bucket shell made of HB400 steel. Bucket edge made of HB500 steel
Volvo Tooth system
The Volvo patented vertical locking device makes mounting and removing fast and easy. For Volvo buckets there are a also wide selection of cutting edges and segments in high strength steel 500 HB to protect the bucket from wear.
16
17
TOP PERFORMANCE DESERVES SUPPORT.
The day you receive your new Volvo Wheel Loader is just the start of your working relationship with Volvo. From service and maintenance to our CareTrack telematics system Volvo has a comprehensive and sophisticated aftermarket portfolio to continuously add value to your business.
Volvo designed and built your machines, so no-one knows how to keep them working in top condition more than us. When it comes to your machine, our Volvo trained technicians are the experts.
Our technicians work with industry leading diagnostic tools and techniques, using only Genuine Volvo Parts to deliver the highest levels of quality and service. Talk to your Volvo dealer about how genuine Volvo services can best provide the service and maintenance plan that is the right fit for you and your business.
State-of-the-art machines require state-of-the-art support and your Volvo dealer can provide a catalogue of services designed to get the most out of your machine, helping you maximise uptime, productivity and residual value. Your Volvo dealer can provide a number of sophisticated support offers, including: Service plans ranging from routine wear inspections, through to comprehensive maintenance and repair agreements. Analysis and diagnostics to help you understand how your machine is running, highlight potential maintenance issues and identify where performance can be improved. Eco Operator training courses can help your operators work towards a safer, more productive and fuel efficient performance.
18
CareTrack*
Each Volvo Wheel Loader comes standard equipped with CareTrack, the Volvo telematics system. CareTrack provides information for better planning and smarter working; including fuel consumption reports, location reports and service reminders. Save fuel. Reduce costs. Maximise profitability. You can with CareTrack.
* In markets where CareTrack is available
19
Volvo L150G, l180G, L220g IN DETAIL.
Engine
13 liter, 6-cylinder straight turbocharged diesel engine with 4 valves per cylinder, overhead camshaft and electronically controlled unit injectors. The engine has wet replaceable cylinder liners and replaceable valve guides and valve seats. The throttle applications is transmitted electrically from the throttle pedal or the optional hand throttle. Air cleaning: Three-stage Cyclone precleaner primary filter - secondary filter. Cooling system: Hydrostatic, electronically controlled fan and intercooler of the air-to-air type.
L150G
Engine
D13H-E (Tier 4i)
D13H-F (Stage IIIB)
Max power at
r/s (r/min)
21,7 (1300)
SAE J1995 gross
kW / hp
220 / 300
ISO 9249, SAE J1349 net kW / hp
220 / 300
Max torque at
r/s (r/min)
17,5 (1050)
SAE J1995 gross
Nm
1871
ISO 9249, SAE J1349
Nm
1869
Economic working range
r/min
8001600
Displacement
l
12,8
L180G Engine
Max power at
SAE J1995 gross ISO 9249, SAE J1349 net Max torque at SAE J1995 gross ISO 9249, SAE J1349 net Economic working range Displacement
r/s (r/min)
kW / hp kW / hp r/s (r/min)
Nm Nm r/min
l
D13H-E (Tier 4i) D13H-F (Stage IIIB)
21,7-23,3 (13001400)
246 / 334 245 / 333 16,7 (1000)
2030 2024 8001600 12,8
L220G Engine
Max power at SAE J1995 gross ISO 9249, SAE J1349 net Max torque at SAE J1995 gross ISO 9249, SAE J1349 net Economic working range Displacement
r/s (r/min)
kW / hp kW / hp r/s (r/min)
Nm Nm r/min
l
D13H-E (Tier 4i) D13H-F (Stage IIIB)
21,7-23,3 (1300-1400)
274 / 373 273 / 371 18,3 (1100)
2231 2220 8001600 12,81
L150G
300 220
200 250 180
160 200
140
150 120 100
100
80
60
800
1000
1200
1400 1600
1800 2000
1800 1600
1400 1200
1400 1200 1000
800
1000 800 600
L180G
350 260
240 300 220
200 250 180
160 200 140
120 150
100
800
1000
1200
1400 1600
1800 2000
2000 1800 1600 1400 1200 1000
800
1400 1200 1000
800 600
L220G
280 350 260
240 300 220
200 250 180
160 200
140
120
800
1000
1200
1400 1600
1800 2000
2200 2000 1800 1600
1600 1400 1200
1400 1000
20
Drivetrain
Torque converter: Single-stage. Transmission: Volvo countershaft transmission with single lever control. Fast and smooth shifting of gears with Pulse Width Modulation (PWM) valve. Torque converter with lockup. Transmission: Volvo Automatic Power Shift (APS) with fully automatic shifting 1-4 and mode selector with 4 different gear shifting programs, including AUTO. Axles: Volvo fully floating axle shafts with planetary hub reductions and nodular iron axle housing. Fixed front axle and oscillating rear axle. 100% differential lock on the front axle. Optional: Limslip rear
L150G
Transmission
Torque multiplication
Maximum speed, 1st gear
forward/reverse
2nd gear
3rd gear
4th gear*
Measured with tires
Front axle/rear axle
Rear axle oscillation ± Ground clearance at 15° osc.
Volvo HTL 221
1,856:1
km/h
6,5
km/h
12,5
km/h
26,0
km/h
38,0
26.5 R25 L3 Volvo/AWB
40B/40C/40B (limslip)
°
15
mm
610
L180G
Transmission
Torque multiplication
Maximum speed, 1st gear
forward/reverse
2nd gear
3rd gear
4th gear*
Measured with tires
Front axle/rear axle
Rear axle oscillation ±
Ground clearance at 15° osc.
km/h km/h km/h km/h
° mm
Volvo HTL 221 1,856:1 6,5 12,5 26,0 38,0
26.5 R25 L3 Volvo/AWB 40B/40B
15 610
L220G
Transmission
Torque multiplication
Maximum speed, 1st gear
forward/reverse
2nd gear
3rd gear
4th gear*
Measured with tires
Front axle/rear axle
Rear axle oscillation ±
Ground clearance at 15° osc.
*) limited by ECU
km/h km/h km/h km/h
° mm
Volvo HTL 306 2,094:1 7,0 12,5 25 38,0
29.5 R25 L4 Volvo/AWB 50/41
15 600
Electrical system
Central warning system: Contronic electrical system with central warning light and buzzer for following functions: - Serious engine fault - Low steering system pressure - Over speed warning engine - Interruption in communication (computer fault) Central warning light and buzzer with the gear engaged for the following functions. - Low engine oil pressure - High engine oil temperature - High charge air temperature - Low coolant level - High coolant temperature - High crank case pressure - Low transmission oil pressure - High transmission oil temperature - Low brake pressure - Engaged parking brake - Fault on brake charging - Low hydraulic oil level - High hydraulic oil temperature - Overspeeding in engaged gear - High brake cooling oil temperature front and rear axles.
L150G, L180G, L220G Voltage Batteries Battery capacity Cold cranking capacity, approx Batteries Alternator rating Starter motor output
V
24
V
2 x 12
Ah
2 x 170
A
1000
connected to postiv terminal
W/A
2280/80
kW
7,0
Brake system
Service brake: Volvo dual-circuit system with nitrogen charged accumulators. Outboard mounted hydraulically operated, fully sealed oil circulation-cooled wet disc brakes. The operator can select automatic disengagement of the transmission when braking using Contronic. Parking brake: Fully sealed, wet multi-disc brake built into the transmission. Applied by spring force and electro-hydraulically release dwith a switch on the instrument panel. Secondary brake: Dual brake circuits with rechargeable accumulators. One circuit or the parking brake fulfills all safety requirements.. Standard: The brake system complies with the requirements of ISO 3450.
L150G
Number of brake discs per wheel front/rear
Accumulators
l
L180G
Number of brake discs per wheel front/rear
Accumulators
l
L220G
Number of brake discs per wheel front/rear
Accumulators
l
2x1,0 2x1,0 2x1,0
front 1 3x0,5
front 1 1x0,5
front 2 1x0,5
21
Volvo L150G, l180G, L220g IN DETAIL.
Cab
Instrumentation: All important information is centrally located in the operator's field of vision. Display for Contronic monitoring system. Heater and defroster: Heater coil with filtered fresh air and fan with auto and 11 speeds. Defroster vents for all window areas. Operator's seat: Operator's seat with adjustable suspension and retractable seatbelt. The seat is mounted on a bracket on the rear cab wall and floor. The forces from the retractable seatbelt are absorbed by the seat rails. Standard: The cab is tested and approved according to ROPS (ISO 3471), FOPS (ISO 3449). The cab meets with requirements according to ISO 6055 (Operator overhead protection - Industrial trucks) and SAE J386 ("Operator Restraint System").
L150G
Emergency exit:
Use emergency hammer to break window
Sound level in cab according to ISO 6396/SAE J2105
LpA
dB(A)
69
External sound level according to ISO 6395/SAE J2104
LwA
dB(A)
108
Ventilation
m3/min
9
Heating capacity
kW
16
Air conditioning (optional)
kW
7,5
L180G
Emergency exit:
Use emergency hammer to break window
Sound level in cab according to ISO 6396/SAE J2105
LpA
dB(A)
70
External sound level according to ISO 6395/SAE J2104
LwA
dB(A)
108
Ventilation
m3/min
9
Heating capacity
kW
16
Air conditioning (optional)
kW
7,5
L220G
Emergency exit:
Use emergency hammer to break window
Sound level in cab according to ISO 6396/SAE J2105
LpA
dB(A)
70
External sound level according to ISO 6395/SAE J2104
LwA
dB(A)
109
Ventilation
m3/min
9
Heating capacity
kW
16
Air conditioning (optional)
kW
7,5
Lift arm system Torque Parallel linkage (TP-linkage) with high breakout torque and parallel action throughout the entire lifting range.
Lift cylinders Cylinder bore Piston rod diameter Stroke Tilt cylinder Cylinder bore Piston rod diameter Stroke
L150G
2
mm
160
mm
90
mm
784
1
mm
220
mm
110
mm
452
Lift cylinders Cylinder bore Piston rod diameter Stroke Tilt cylinder Cylinder bore Piston rod diameter Stroke
L180G
2
mm
180
mm
90
mm
788
1
mm
240
mm
120
mm
480
Lift cylinders Cylinder bore Piston rod diameter Stroke Tilt cylinder Cylinder bore Piston rod diameter Stroke
L220G
2
mm
190
mm
90
mm
768
1
mm
250
mm
120
mm
455
22
Hydraulic system
System supply: Two load-sensing axial piston pumps with variable displacement. The steering function always has priority. Valves: Double-acting 2-spool valve. The main valve is controlled by pilot pressure and electric servo (L150G) i.e. by a 2-spool pilot valve (L180G/L220G). Lift function: The valve has three positions: raise, hold and lower position. Inductive/magnetic automatic boom kickout can be switched on and off and is adjustable to any position between maximum reach and full lifting height. Tilt function: The valve has three functions including rollback, hold and dump. Inductive/magnetic automatic tilt can be adjusted to the desired bucket angle. Cylinders: Double-acting cylinders for all functions. Filter: Full flow filtration through 10 micron (absolute) filter cartridge.
Working pressure maximum, pump 1 Flow at engine speed Working pressure maximum, pump 2 Flow at engine speed Working pressure maximum, pump 3 Flow at engine speed Pilot system, working pressure Cycle times Tilt* Lower, empty Total cycle time
MPa
l/min MPa r/s(r/min)
MPa
l/min MPa r/s(r/min)
MPa
l/min MPa r/s(r/min)
MPa
s s s
L150G
29,0
180 10
32(1900)
31,0
202 10
32(1900)
25,0
77 10 32(1900)
3,5
2,0 3,7 11,6
L180G
29,0
217 10
32(1900)
31,0
202 10
32(1900)
25,0
77 10 32(1900)
3,5
1,8 3,3 11,5
L220G
29,0
253 10
32(1900)
31,0
202 10
32(1900)
25,0
77 10 32(1900)
3,5
1,6 3,2 10,6
Steering system
Steering system: Load-sensing hydrostatic articulated steering. System supply: The steering system has priority feed from a loadsensing axial piston pump with variable displacement. Steering cylinders: Two double-acting cylinders.
Steering cylinders Cylinder bore Rod diameter Stroke Working pressure Maximum flow Maximum articulation
mm mm mm MPa l/min ± °
L150G 2
100 60
390 21
188 37
L180G 2
100 60
525 21
188 37
L220G 2
100 60
525 21
191 37
Service
Service accessibility: Large, easy-to-open hood covering whole engine department, electrically operated. Fluid filters and component breather air filters promote long service intervals. Possibility to monitor, log and analyze data to facilitate troubleshooting.
Fuel Tank Engine coolant Hydraulic oil tank Transmission oil Engine oil Axle oil front/rear
L150G L180G L220G
l
335
335
335
l
46
46
46
l
156
156
226
l
48
48
48
l
50
50
50
l 45/55 45/55 77/71
23
SPECIFICATIONS.
Tires L150G, L180G: 26.5 R25 L3. Tires L220G: 29.5 R25 L4
Standard boom
Long boom
L150G L180G L220G L150G L180G L220G
B
mm 7070 7190 7480 7570 7620 7800
C
mm 3550 3550 3700 3550 3550 3700
D
mm
470
480
540
460
480
540
F
mm 3570 3580 3740 3560 3580 3740
G
mm 2134 2134 2131 2134 2133 2133
J
mm 3910 4050 4240 4480 4540 4600
K
mm 4320 4470 4670 4890 4960 5030
O
°
58
57
56
59
55
56
Pmax
°
50
49
48
49
49
48
R
°
45
45
43
48
49
44
R1*
°
48
48
47
53
53
49
S
°
66
71
65
61
63
63
T
mm
106
140
111
161
223
117
U
mm
510
550
590
630
650
670
a4
X
mm 2280 2280 2400 2280 2280 2400
V
Y
mm 2960 2960 3170 2960 2960 3170
a1
Z
mm 3490 3810 4060 3950 4170 4390
a2
mm
a3
mm
a4
±°
* Carry position SAE
6780 3830
37
6780 3830
37
7110 3940
37
6780 3830
37
6780 3830
37
7110 3940
37
Where applicable, specifications and dimensions are according to ISO 7131, SAE J732, ISO 7546, SAE J742, ISO 14397, SAE J818.
L150G
Sales code: WLA80713 Operating weight (incl. logging cw 1 140 kg): 25 660 kg Operating load: 7 700 kg
L180G
Sales code: WLA80027 Operating weight (incl. logging cw 1 140 kg): 28 470 kg Operating load: 8 710 kg
L220G Sales code: WLA80852 Operating weight (incl. logging cw 800 kg): 32 810 kg Operating load: 10 080 kg
Tires L150G, L180G: 775/65 R29 L3 Tires L220G: 875/65 R29 L4
L150G
A
m2
3,1
B
mm
3 660
C
mm
2 110
D
mm
2 960
E
mm
1 650
F
mm
1 630
G
mm
2 930
H
mm
4 990
I
mm
7 270
J
mm
3 080
K
mm
3 340
L
mm
2 290
M
mm
9 680
L180G 3,5
3 870 2 150 3 150 1 720 1 700 3 040 5 170 7 610 3 370 3 710 2 410 9 980
L220G 4,0
3 920 2 270 3 160 1 780 1 640 3 230 5 350 7 730 3 620 3 940 2 630 10 380
a3 a2
X Y
24
L150G Tires 26.5 R25 L3
REHANDLING
GENERAL PURPOSE
ROCK* LIGHT MATERIAL
LONG BOOM
4 m3 STE P BOE
4,4 m3 STE P BOE
4,8 m3 STE P BOE
5,2 m3 STE P BOE
Volume, heaped ISO/SAE
m3
4,0
4,4
4,8
5,2
Volume at 110% fill factor
m3
4,4
4,8
5,3
5,7
Static tipping load, straight
kg 19850 19590 19310 19160
at 35° turn
kg 17700 17440 17170 17020
at full turn
kg 17460 17200 16920 16780
Breakout force
kN
201,1
191,5
183,2
182,6
A
mm
8590
8670
8740
8750
E
mm
1230
1300
1360
1370
H**)
mm
3030
2970
2920
2920
L
mm
5730
5780
5880
5870
M**)
mm
1220
1270
1320
1320
N**)
mm
1800
1830
1860
1860
V
mm
3200
3200
3200
3400
a1 clearance circle
mm 14640 14670 14700 14890
Operating weight
kg 24490 24700 24890 25020
*) With L5 tires **) Measured to the tip of the bucket teeth or bolt-on edge. Dump height to bucket edge.
Measured at 45° dump angle. (Spade nose buckets at 42°.)
4 m3 STE P T SEG
4,0 4,4 17610 15710 15500 202,0 8800 1410 2880 5870 1350 1870 3230 14750 23680
4,4 m3 STE P T SEG
4,5 m3 STE P T SEG
3,5 m3 SPN P T SEG
6,8 m3 LM P
4,4
4,5
3,5
6,8
-
4,8
5,0
3,9
7,5
-
17230 17620 18300 16550
-3490
15330 15710 16320 14710
-3210
15110 15490 16090 14500
-3180
192,7
190,5
187,9
146,6
9
8880
8890
8850
9140
510
1480
1500
1450
1710
10
2830
2820
2870
2620
570
5980
5890
5980
6090
560
1400
1410
1420
1560
-20
1890
1900
1930
1940
450
3230
3000
3230
3200
-
14790 14580 14800 14900
-
24020 23780 24930 23990
410
Note: This only applies to genuine Volvo attachments.
Bucket Selection Chart
The chosen bucket is determined by the density of the material and the expected bucket fill factor. The actual bucket volume is often larger than the rated capacity, due to the features of the TP linkage, including an open bucket design, good rollback angles in all positions and good bucket filling performance. The example represents a standard boom configuration. Example: Sand and gravel. Fill factor ~ 105%. Density 1,6 t/m3. Result: The 4,0 m3 bucket carries 4,2 m3. For optimum stability always consult the bucket selection chart.
Material
Bucket fill, %
Material density, t/m3
ISO/SAE bucket volume, m3
Actual volume, m3
Earth/Clay
~ 110
~ 1,6
4,0
~ 1,5
4,4
~ 4,4 ~ 4,8
Light material
Rock
General purpose
Rehandling*
L150G
4,4 m3 4,8 m3 5,2 m3 4,0 m3 4,4 m3 3,5 m3
6,8 m3
6,8
4,0 m3
4,6
4,4
5,0
4,8
5,5
5,2
4,4
4,0
4,8
4,4
3,5
3,3
4,2
4,0
Rehandling*
Sand/Gravel ~ 105 Aggregate ~ 100
Rock
100
~ 1,6
4,0
~ 1,5
4,4
~ 1,8
4,4
~ 1,7
4,8
~ 1,5
5,2
~ 1,7
3,5
~ 4,2 ~ 4,6
~ 4,4 ~ 4,8 ~ 5,2 ~ 3,5
Light material
Rock
General purpose
4,4 m3 3,7 m3 3,5 m3 6,8 m3 6,8
4,6
4,4
4,1
3,7
3,5 3,3
The size of rock buckets is optimized for optimal penetration and filling capability rather than the density of the material.
* Including counterweight
Supplemental Operating Data
Tires 26.5 R25 L3
Width over tires
mm
Ground clearance
mm
Tipping load, full turn
kg
Operating weight
kg
Standard boom
26.5 R25 L5 775/65 R29 L3
+30
+180
+30
+10
+760
+590
+1060
+760
Long boom
26.5 R25 L5 775/65 R29 L3
+30
+180
+30
+10
+640
+500
+1050
+750
25
SPECIFICATIONS.
L180G Tires 26.5 R25 L3
REHANDLING
GENERAL PURPOSE
ROCK* LIGHT MATERIAL
LONG BOOM
4.8 m3 STE P BOE
5.2 m3 STE P BOE
5.5 m3 STE P BOE
5.8 m3 STE P BOE
Volume, heaped ISO/SAE
m3
4,8
5,2
5,5
5,8
Volume at 110% fill factor
m3
5,3
5,7
6,1
6,4
Static tipping load, straight
kg 22930 22780 22610 22480
at 35° turn
kg 20310 20160 20000 19870
at full turn
kg 20010 19870 19700 19580
Breakout force
kN
224,8
224,2
216,2
209,9
A
mm
8890
8890
8960
9010
E
mm
1420
1430
1490
1540
H**)
mm
3060
3060
3010
2980
L
mm
6020
6010
6040
6110
M**)
mm
1330
1340
1380
1410
N**)
mm
1960
1970
1990
2010
V
mm
3200
3400
3400
3400
a1 clearance circle
mm 14800 14990 15010 15040
Operating weight
kg 27340 27460 27560 27630
*) With L5 tires **) Measured to the tip of the bucket teeth or bolt-on edge. Dump height to bucket edge.
Measured at 45° dump angle. (Spade nose buckets at 42°.)
4.4 m3 STE P T SEG
4,4 4,8 21080 18700 18420 236,3 9010 1540 2970 6120 1410 2000 3230 14880 26460
4.6 m3 STE P T SEG
4.8 m3 STE P T SEG
4.2 m3 SPN P T SEG
7.8 m3 LM P
4,6
4,8
4,2
7,8
-
5,1
5,3
4,6
8,6
-
21100 20900 21650 19710
-3760
18710 18520 19190 17390
-3430
18440 18250 18910 17130
-3390
236,3
226,7
212,6
173,4
4
9010
9080
9140
9360
470
1540
1600
1650
1860
20
2970
2930
2910
2700
500
6170
6170
6320
6300
490
1410
1460
1520
1610
20
2000
2030
2080
2060
420
3230
3230
3230
3400
-
14880 14910 14960 15220
-
26500 26560 27720 26740
310
Note: This only applies to genuine Volvo attachments.
Bucket Selection Chart
The chosen bucket is determined by the density of the material and the expected bucket fill factor. The actual bucket volume is often larger than the rated capacity, due to the features of the TP linkage, including an open bucket design, good rollback angles in all positions and good bucket filling performance. The example represents a standard boom configuration. Example: Sand and gravel. Fill factor ~ 105%. Density 1,6 t/m3. Result: The 4,6 m3 bucket carries 4,8 m3. For optimum stability always consult the bucket selection chart.
Material
Bucket fill, %
Material density, t/m3
ISO/SAE bucket volume, m3
Actual volume, m3
Earth/Clay
~ 110
~ 1,7
4,4
~ 1,6
4,6
~ 1,5
4,8
~ 4,8 ~ 5,1 ~ 5,3
Sand/Gravel ~ 105
~ 1,7
4,4
~ 1,6
4,6
~ 1,5
4,8
~ 4,6 ~ 4,8 ~ 5,1
Aggregate ~ 100
~ 1,8
5,2
~ 1,7
5,5
~ 1,6
5,8
~ 5,2 ~ 5,5 ~ 5,8
Rock
100
~ 1,7
4,3
~ 4,3
Light material
Rock
General purpose
Rehandling*
Light material
Rock
General purpose
Rehandling*
L180G
5,2 m3 5,5 m3 5,8 m3 4,4 m3 4,6 m3 4,8 m3 4,2 m3
7,8 m3
7,8
4,8 m3 5,2 m3
4,4 m3
4,2 m3 7,8 m3 7,8
5,5
5,2
5,8
5,5
6,1
5,8
4,8
4,4
5,1
4,6
5,3
4,8
4,2
4,0
5,0
4,8
5,5
5,2
4,8
4,4
4,2 4,0
The size of rock buckets is optimized for optimal penetration and filling capability rather than the density of the material.
* Including counterweight
Supplemental Operating Data
Tires 26.5 R25 L3
Width over tires
mm
Ground clearance
mm
Tipping load, full turn
kg
Operating weight
kg
Standard boom
26.5 R25 L5 775/65 R29 L3
+30
+130
+40
+10
+770
+600
+1050
+920
Long boom
26.5 R25 L5 775/65 R29 L3
+30
+130
+40
+10
+760
+530
+1050
+1120
26
L220G Tires 29.5 R25 L4
REHANDLING
GENERAL PURPOSE
ROCK*
LIGHT MATERIAL
LONG BOOM
Additional machine specification
5.6 m3 STE P BOE
5.9 m3 STE P BOE
6.3 m3 STE P BOE
4.9 m3 STE P T SEG
Volume, heaped ISO/SAE
m3
5,6
5,9
6,3
4,9
Volume at 110% fill factor
m3
6,2
6,5
6,9
5,4
Static tipping load, straight
kg 24850 24720 24540 23660
at 35° turn
kg 22080 21950 21780 21040
at full turn
kg 21760 21640 21470 20740
Breakout force
kN
228,2
222,5
214,4
255,2
A
mm
9240
9290
9360
9290
E
mm
1440
1480
1550
1480
H**)
mm
3190
3160
3110
3160
L
mm
6290
6310
6400
6390
M**)
mm
1380
1410
1460
1410
N**)
mm
2090
2110
2140
2100
V
mm
3400
3400
3400
3430
a1 clearance circle
mm 15560 15580 15620 15610
Operating weight
kg 32280 32360 32470 31550
*) With L5 tires **) Measured to the tip of the bucket teeth or bolt-on edge. Dump height to bucket edge.
Measured at 45° dump angle. (Spade nose buckets at 42°.)
Bucket Selection Chart
The chosen bucket is determined by the density of the material and the expected bucket fill factor. The actual bucket volume is often larger than the rated capacity, due to the features of the TP linkage, including an open bucket design, good rollback angles in all positions and good bucket filling performance. The example represents a standard boom configuration. Example: Sand and gravel. Fill factor ~ 105%. Density 1,6 t/m3. Result: The 5,2 m3 bucket carries 5,5 m3. For optimum stability always consult the bucket selection chart.
Material
Bucket fill, %
Material density, t/m3
ISO/SAE bucket volume, m3
Actual volume, m3
Earth/Clay
~ 110
~ 1,6
4,9
~ 1,5
5,2
~ 1,4
5,4
~ 5,4 ~ 5,7 ~ 5,9
Sand/Gravel ~ 105
~ 1,7
4,9
~ 1,6
5,2
~ 1,5
5,4
~ 5,1 ~ 5,5 ~ 5,7
Aggregate ~ 100
~ 1,8
5,6
~ 1,7
5,9
~ 1,6
6,3
~ 5,6 ~ 5,9 ~ 6,3
Rock
100
~ 1,7
4,5
~ 4,5
The size of rock buckets is optimized for optimal penetration and filling capability rather than the density of the material.
5.2 m3 STE P T SEG
5,2 5,7 23520 20900 20600 248,1 9340 1520 3120 6450 1440 2120 3430 15630 31640
Light material
General purpose
Light material
General purpose
5.6 m3 STE P T SEG
4.5 m3 SPN P T SEG
5,0 m3 SPN P T SEG
8.2 m3 LM P
5,6
4,5
5,0
8,2
-
6,2
5,0
5,5
9,0
-
23250 24000 23170 22520
-2870
20650 21340 20580 19950
-2640
20350 21040 20280 19660
-2610
231,9
212,0
196,6
190,3
4
9440
9580
9730
9560
310
1620
1730
1860
1730
-20
3060
3030
2930
2940
360
6460
6420
6500
6480
370
1520
1690
1800
1580
-30
2180
2250
2300
2170
270
3430
3430
3430
3700
-
15690 15770 15850 16010
-
31680 32990 33160 32040
390
Note: This only applies to genuine Volvo attachments.
Rehandling*
Rock
L220G
5,6 m3 5,9 m3 6,3 m3 4,9 m3 5,2 m3 5,6 m3 4,5 m3 5,0 m3
8,2 m3
8,2
5,6 m3 5,9 m3
4,9 m3
4,5 m3
8,2 m3
8,2
5,9
5,6
6,2
5,9
6,6
6,3
5,4
4,9
5,7
5,2
6,2
5,6
4,5 4,3
5,0
5,3
5,9
5,6
6,2
5,9
5,4
4,9
4,5 4,3
Rehandling*
Rock
Supplemental Operating Data
Tires 29.5 R25 L4
Width over tires
mm
Ground clearance
mm
Tipping load, full turn
kg
Operating weight
kg
Standard boom
29.5 R25 L3 29.5 R25 L5 875/65 R29 L4
-20
+35
+95
±0
+40
-10
-100
+1010
+180
-80
+1490
+650
29.5 R25 L3 -20 ±0 -90 -80
Long boom 29.5 R25 L5
+35 +40 +930 +1500
875/65 R29 L4 +95 -20
+180 +650
* Including counterweight
27
equipment.
STANDARD EQUIPMENT
L150G L180G L220G
Service and maintenance
Engine oil remote drain and fill
·
·
·
Transmission oil remote drain and fill
·
·
·
Lubrication manifolds, ground accessible
·
·
·
Pressure check connections: transmission and hydraulic, ·
·
·
quick-connects
Tool box, lockable
·
·
·
CareTrack
·
·
·
Telematics, 3-Year Subscription
·
·
·
Engine
Exhaust after-treatment system
·
·
·
Three stage air cleaner, pre-cleaner, primary and
·
·
·
secondary filter
Indicator glass for coolant level
·
·
·
Preheating of induction air
·
·
·
Fuel pre-filter with water trap
·
·
·
Fuel filter
·
·
·
Crankcase breather oil trap
·
·
·
Exhaust heat insulation
·
·
·
Exterior radiator air intake protection
·
·
·
Electrical system
24 V, pre-wired for optional accessories
·
·
·
Alternator 24V/ 80A
·
·
·
Battery disconnect switch with removable key
·
·
·
Fuel gauge
·
·
·
Hour meter
·
·
·
Electric horn
·
·
·
Instrument cluster:
·
·
·
· Fuel level
· Transmission temperature
· Coolant temperature
· Instrument lighting
Lighting:
·
·
·
· Twin halogen front headlights with high and low beams
· Parking lights
· Double brake and tail lights
· Turn signals with flashing hazard light function
· Halogen work lights (2 front and 2 rear)
Contronic monitoring system
Monitoring and logging of machine data
·
·
·
Contronic display
·
·
·
Fuel consumption
·
·
·
Ambient temperature
·
·
·
Clock
·
·
·
Test function for warning and indicator lights
·
·
·
Brake test
·
·
·
Test function, sound level at max fan speed
·
·
·
Warning and indicator lights:
·
·
·
· Battery charging
· Parking brake
Warning and display message:
·
·
·
· Regeneration
· Engine coolant temperature
· Charge-air temperature
· Engine oil temperature
· Engine oil pressure
· Transmission oil temperature
· Transmission oil pressure
· Hydraulic oil temperature
· Brake pressure
· Parking brake applied
· Brake charging
· Overspeed at direction change
· Axle oil temperature
· Steering pressure
· Crankcase pressure
· Attachment lock open
Level warnings:
·
·
·
· Fuel level
· Engine oil level
· Engine coolant level
· Transmission oil level
· Hydraulic oil level
· Washer fluid level
Engine torque reduction in case of malfunction indication: ·
·
·
· High engine coolant temperature
· High engine oil temperature
28
· Low engine oil pressure
· High crankcase pressure
· High charge-air temperature
Engine shutdown to idle in case of malfunction indication: ·
·
·
· High transmission oil temperature
· Slip in transmission clutches
Keypad, background lit
·
·
·
Start interlock when gear is engaged
·
·
·
Drivetrain
Automatic Power Shift
·
·
·
Fully automatic gearshifting, 1-4
·
·
·
PWM-controlled gearshifting
·
·
·
Forward and reverse switch by hydraulic lever console ·
·
·
Indicator glass for transmission oil level
·
·
·
Differentials:
·
·
·
Front, 100% hydraulic diff lock. Rear, conventional.
OptiShift
·
·
·
Brake system
Dual brake circuits
·
·
·
Dual brake pedals
·
·
·
Secondary brake system
·
·
·
Parking brake, electrical-hydraulic
·
·
·
Brake wear indicators
·
·
·
Cab
ROPS (ISO 3471), FOPS (ISO 3449)
·
·
·
Single key kit door/start
·
·
·
Acoustic inner lining
·
·
·
Ashtray
·
·
·
Cigarette lighter, 24 V power outlet
·
·
·
Lockable door
·
·
·
Cab heating with fresh air inlet and defroster
·
·
·
Fresh air inlet with two filters
·
·
·
Automatic heat control
·
·
·
Floor mat
·
·
·
Dual interior lights
·
·
·
Dual interior rear-view mirrors
·
·
·
Dual exterior rear-view mirrors
·
·
·
Sliding window, right side
·
·
·
Tinted safety glass
·
·
·
Retractable seatbelt (SAE J386)
·
·
·
Adjustable steering wheel
·
·
·
Storage compartment
·
·
·
Document pocket
·
·
·
Sun visor
·
·
·
Beverage holder
·
·
·
Windshield washer front and rear
·
·
·
Windshield wipers front and rear
·
·
·
Interval function for front and rear wipers
·
·
·
Hydraulic system
Main valve, double acting 2-spool with hydraulic pilots ·
·
·
Variable displacement axial piston pumps (3) for:
·
·
·
1 Working hydraulic system
2 Working hydraulic system,
Steering- and Brake system 3 Cooling fan and Brake system Electro-hydraulic servo controls
·
·
·
Electric level lock
·
·
·
Boom kick-out, automatic
·
·
·
Bucket positioner, automatic
·
·
·
Double-acting hydraulic cylinders
·
·
·
Indicator glass for hydraulic oil level
·
·
·
Hydraulic oil cooler
·
·
·
External equipment
Fenders, front and rear
·
·
·
Viscous cab mounts
·
·
·
Rubber engine and transmission mounts
·
·
·
Easy-to-open side panels
·
·
·
Frame, joint lock
·
·
·
Vandalism lock prepared for
·
·
·
· Batteries
· Engine compartment
· Radiator grille Lifting eyes
·
·
·
Tie-down eyes
·
·
·
Tow hitch
·
·
·
Counterweight, pre-drilled for optional guards
·
·
·
OPTIONAL EQUIPMENT
L150G L180G L220G
Service and maintenance
Automatic lubrication system
·
·
·
Automatic lubrication system for long boom
·
·
·
Grease nipple guards
·
·
·
Oil sampling valve
·
·
·
Refill pump for grease to lube system
·
·
·
Tool kit
·
·
·
Wheel nut wrench kit
·
·
·
Engine
Air pre-cleaner, cyclone type
·
·
·
Air pre-cleaner, cyclone type, two-stage
·
·
·
Air pre-cleaner, oil-bath type
·
·
·
Air pre-cleaner, turbo type
·
·
·
Radiator corrosion protection
·
·
·
Engine auto shutdown
·
·
·
Engine block heater 230V/110V
·
·
·
ESW, Disabled engine protection
·
·
·
Air intake protection (for grill in waste)
·
·
·
Fuel fill strainer
·
·
·
Fuel heater
·
·
·
Hand throttle control
·
·
·
Max. fan speed, hot climate
·
·
·
Radiator, corrosion-protected
·
·
·
Reversible cooling fan
·
·
·
Reversible cooling fan and axle oil cooler
·
·
·
Fuel filter, extra
·
·
·
Electrical system
Alternator, 80 A with air filter
·
·
·
Anti-theft device
·
·
·
Headlights, assym. left
·
·
·
License plate holder, lighting
·
·
·
Rear view camera incl. monitor, colour
·
·
·
Rear-view mirrors, adjustable, el.heated
·
·
·
Rear view mirrors, Long arm
·
·
·
Rear view mirrors, adjustable, el.heated, Long arm
·
·
·
Reduced function working lights,
·
·
·
reverse gear activated
Reverse alarm
·
·
·
Reverse warning light, strobe lighting
·
·
·
Shortened headlight support brackets
·
·
·
Side marker lamps
·
·
Rotating beacon
·
·
·
Working lights, attachments
·
·
·
Working lights front, high intensity discharge (HID) ·
·
·
Working lights front, on cab, dual
·
·
·
Working lights front, extra
·
·
·
Working lights rear, on cab
·
·
·
Working lights rear, on cab, dual
·
·
·
Cab
Anchorage for Operator's manual
·
·
·
Automatic Climate Control, ACC
·
·
·
ACC control panel, with Fahrenheit scale
·
·
·
Asbestos dust protection filter
·
·
·
Cab air pre-cleaner, cyclone type
·
·
·
Carbon filter
·
·
·
Cab roof, heavy-duty
·
·
·
Cover plate, under cab
·
·
·
Lunch box holder
·
·
·
Armrest, operator's seat, ISRI, left only
·
·
·
Operator's seat, KAB, air susp, heavy-duty, for CDC ·
·
·
and/or elservo
Operator's seat, ISRI, air susp, heat, high back
·
·
·
Radio installation kit incl. 11 amp 12 volt outlet, left side ·
·
·
Radio installation kit incl. 11 amp 12 volt outlet, right side ·
·
·
Radio installation kit incl. 20 amp 12 volt outlet
·
·
·
Radio with CD-player
·
·
·
Seatbelt, 3", (width 75 mm)
·
·
·
Steering wheel knob
·
·
·
Sun blinds, rear windows
·
·
·
Sun blinds, side windows
·
·
·
Timer cab heating
·
·
·
Window, sliding, door
·
·
·
Universal door/ignition key
·
·
·
Front view mirror
·
·
·
Drivetrain
Diff lock front 100%, Limited Slip rear
·
·
·
Speed limiter, 20 km/h
·
·
·
Speed limiter, 30 km/h
·
·
·
Speed limiter, 40 km/h
·
Wheel/axle seal guards
·
·
·
Brake system
Oil cooler and filter front & rear axle
·
·
·
Stainless steel, brake lines
·
·
Hydraulic system
Attachment bracket, welded
·
·
·
Boom suspension system
·
·
·
Separate attachment locking, standard boom
·
·
·
Separate attachment locking, long boom
·
·
·
Arctic kit, attachment locking hoses and 3rd hydr.
·
·
·
function
Arctic kit, pilot hoses and brake accum. incl. hydr. oil ·
·
·
Boom cylinder hose and tube guards
·
·
·
Boom cylinder hose and tube guards for long boom ·
·
·
Hydraulic fluid, biodegradable, Volvo
·
·
·
Hydraulic fluid, fire-resistant
·
·
·
Hydraulic fluid, for hot climate
·
·
·
Electro-hydraulic function, 3rd
·
·
·
Electro-hydraulic function, 3rd for long boom
·
·
·
Electro-hydraulic function, 3rd-4th
·
·
·
Electro-hydraulic function, 3rd-4th for long boom
·
·
·
Electro-hydraulic servo controls for long boom
·
·
·
External equipment
Cab ladder, rubber-suspended
·
·
·
Deleted front mudguards
·
·
·
Mudguard widener, front/rear for 80-series tires
·
·
·
Mudguard widener, front/rear for 65-series tires
·
·
·
Fire suppression system
·
·
·
Mudguards, full cover, rear for 80-series tires
·
·
·
Mudguards, full cover, rear for 65-series tires
·
·
·
Long boom
·
·
·
Long boom for electro-hydraulic
·
·
·
Protective equipment
Belly guard front
·
·
·
Belly guard rear
·
·
·
Belly guard rear, oil pan
·
·
·
Cover plate, heavy-duty, front frame
·
·
·
Cab roof heavy duty
·
·
·
Guards for front headlights
·
·
·
Guards for radiator grill
·
·
·
Guards for tail lights
·
·
·
Windows, side and rear guards
·
·
·
Windshield guard
·
·
·
Corrosion protection, painting of machine
·
·
·
Corrosion protection, painting of attachment bracket ·
·
Bucket Teeth protection
·
·
Other equipment
CE-marking
·
·
·
Comfort Drive Control (CDC)
·
·
·
Counterweight, logging
·
·
·
Counter weight, block handling
·
Counterweight, re-handling
·
·
·
Counterweight, signal painted, chevrons
·
·
·
Log pusher
·
·
·
Secondary steering with automatic test function
·
·
·
Sound decal, EU
·
·
·
Noise reduction kit, exterior
·
·
·
Sign, slow moving vehicle
·
·
CareTrack, GSM
·
·
·
CareTrack, GSM/Satellite
·
·
·
Tires
26.5 R25
·
·
29.5 R25
·
775/65 R29
·
·
875/65 R29
·
29
equipment.
OPTIONAL EQUIPMENT
Attachments Buckets: · Rock straight or spade nose · General purpose · Re-handling · Side-dump · Light material Wear parts: · Bolt-on and weld-on bucket teeth · Segments · Cutting edge in three sections, bolt-on Fork equipment Material handling arm Log grapples
L150G L180G L220G
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
SELECTION OF VOLVO OPTIONAL EQUIPMENT Comfort Drive Control (CDC)
Electro-hydraulic 3rd-4th function
Rear-view camera
Boom Suspension System
Fire Suppression System
Automatic Lubrication System
30
31
volvo construction equipment
Volvo Construction Equipment is different. Our machines are designed, built and supported in a different way. That difference comes from an engineering heritage of over 175 years. A heritage of thinking first about the people
who actually use the machines. About how to help them be safer, more comfortable, more productive. About the environment we all share. The result of that thinking is a growing range of machines and a global support network
dedicated to helping you do more. People around the world are proud to use Volvo. And we're proud of what makes Volvo different.
Not all products are available in all markets. Under our policy of continuous improvement, we reserve the right to change specifications and design without prior notice. The illustrations do not necessarily show the standard version of the machine.
Ref. No 21A1006521 2010.11 Volvo, Global Marketing
English (Global) WLO
Acrobat Distiller 9.4.0 (Macintosh)