Godrej SeeThru RE7 V-Series Video Door Phone User Manual

WARNING AND CAUTION

Please make sure to follow the instructions to prevent any danger or property losses.

• ⚠️ Warning: Death or serious injury are expected.
• ? Do not disassemble, install, or repair this product on your own accord.
• ? Do not place the product near a hot or humid place.
• ? Do not forcibly bend the cord or put a heavy object on the product.
• ? Do not use water, thinner or a detergent used to wash oil products when you wash the exterior.
• ? Do not connect to other products while in use.
• ❗ Make sure to clean it by using a dry dry cloth to prevent any breakdown or electric shock.
• ❗ If the product emits a peculiar noise, odor or smoke, immediately cut off the power, and then contact the service center.
• ? Do not put the plug in the socket with a wet hand.
• ⚠️ Caution: An injury or property losses are expected.
• ❗ Make sure that dust or foreign substances are not gathered on the product.
• ? Make sure to prevent foreign substances from entering the product.
• ? Avoid direct rays of the sun or heating devices at a time of installation.
• ✅ Install the product in a flat and stable place.
• ? Pull the plug if the product is not used for a long time.
• ? Do not unplug the micro SD card when recording, this generally will cause loss of data.

1. FEATURES AND FUNCTIONS

Monitor

• 7" color indoor monitor
• Support 2 door stations and 3 monitors
• Brightness, color and contrast adjustable
• Ring volume adjustable
• Hands-free
• Support DC 12V power input
• Support 5 touch buttons
• Support 1 CCTV input
• OSD menu support
• Door lock release
• Monitoring & Talking with a visitor

Outdoor Panel

• Wide angle color camera
• Door lock release
• LED for night vision
• Surface mounted

2. SPECIFICATIONS MONITOR UNIT

3. SPECIFICATIONS OUTDOOR PANEL

4. VDP (VIDEO DOOR PHONE) CONTENT

The VDP system includes the following components:

• OUT DOOR PANEL: The outdoor unit with camera and call button.
• MONITOR: The indoor unit with display and controls.
• POWER ADAPTER: To supply power to the system.
• USER MANUAL: This document.

5. HARDWARE DESCRIPTION

Monitor Unit Components

Outdoor Panel Components

6. OPERATION OF THE VIDEO DOOR PHONE

(a) Visitor press the call button of the outdoor panel to call the monitor. To accept the call, press Talk button on the video monitor. Talking time lasts for 60s.

(B) Below is the button description for indoor monitors:

• To talk between the monitor and camera unit, please press [Talk Button].
• To Intercom with the slave monitor, please press [Intercom Button].
• To monitor the outdoor panel, please press [Monitor Button].
• To control an electric door release, please press [Unlock Button].

7. INSTALLATION

Indoor Monitor Installation:

[Diagram showing indoor monitor mounted on a wall]Choose a suitable location to install the system, it is recommended to fix the monitor at the user-eyes height between 145cm and 160cm.Mark the holes of the frame on the wall and drill the holes.Drill the hole into the wall in the center of the bracket for cables to go through the wall.Fix the bracket with extension pipe and screws.

Outdoor Panel Installation:

[Diagram showing outdoor panel mounted on a wall]The outdoor panel should be mounted at eye level of a person.

8. CABLING REQUIREMENT

Video door phone system uses 4 core cables. Cable should be used according to different distance requirement from outdoor panel to indoor monitor. In the areas with high possibility of interference, it is recommended to use a 75ohm coaxial for connection for better video signal.

9. PRECAUTIONS

• Do not place the monitor near a TV-set or in an environment with high temperature and damp place.
• Do not take apart the outdoor unit or any parts of the video system.
• Protect the lens of the outdoor camera unit from direct sunlight to avoid pale picture on the monitor.
• Do not use the equipment in an environment with vibrations. Protect the equipment from falls.

ATTENTION: The outdoor unit is suitable ONLY for installation inside a building; otherwise, there is a risk of damage to the product.

10. INFORMATION ON E-WASTE HANDLING AND MANAGEMENT

Dear Customer,

The Ministry of Environment and Forests have published The E-waste (Management and Handling) Rules 2010 which comes into effect from 1st May 2012.

E-waste is defined as any electrical or electronic component of products in whole or in part, or rejects from their manufacturing or repair process which are intended to be discarded. These rules apply to every producer, consumer, or bulk consumer involved in the manufacture, sale, purchase, and processing of electrical and electronic equipment or components as specified in Schedule 1 (please refer to our website www.godrej.com under the 'Green Think' section of Godrej Security Solutions Division Page for more details).

Under these rules, specific roles and responsibilities are defined for producers, consumers, and recyclers handling and managing e-waste. E-waste is to be managed in an environmentally sound manner, which means taking steps to ensure that health and environment are protected from adverse effects of hazardous substances contained in such wastes.

Rule 6 of the E-waste (Management and Handling) Rules 2010 states that bulk consumers of electrical and electronic equipment shall be responsible for the recycling of the e-waste generated by them. Bulk consumer means bulk users of electronic and electrical equipment such as Central Government or State Government Departments, public sector undertakings, banks, educational institutions, multinational organizations, and international agencies, private companies registered under the Factories Act, 1948, and Companies Act, 1956. Bulk consumers must ensure that the e-waste generated by them is channelized to authorized collection centers or is taken back by the producers. They shall maintain records of e-waste generated by them in Form 2 and make such records available for scrutiny by the State Pollution Control Board or the Pollution Control Committee concerned.

All consumers of electrical and electronic equipment, irrespective of their status as bulk consumers or not, shall ensure that e-waste generated by them is channelized to authorized collection centers, registered dismantlers, or recyclers, or is returned to the pick-up/take-back services provided by the producers. (Please refer to our website www.godrej.com under the 'Green Think' section of Godrej Security Solutions Division Page for more details).

All products intended to be recycled under the category of e-waste (as defined above) carry a label or stamp of the WEEE symbol [Wheelie bin with a cross], which states that it falls under the hazardous waste category and is not to be disposed of along with normal garbage.

We seek your support in ensuring environmentally sound management of e-waste and aiding us in sustaining our earth's natural resources and maintaining the earth's green cover intact for the benefit of our future generations.

RECORD OF PURCHASE

Please fill your details below for future reference.

FOR SAFETY, PLEASE READ THIS MANUAL PRIOR TO USE.

Godrej & Boyce Mfg. Co. Ltd., Godrej Security Solutions
Regd. Office: Plant No. 17, Pirojshanagar,
Vikhroli, Mumbai - 400079

Toll Free: 1800 209 9955 (Sales & Service)
Whatsapp Support: +91 9321665511 (Service)
Visit: www.godrejsecure.com
Email: secure@godrej.com (Sales), secare@godrej.com (Service)

Follow us:

• [Facebook] www.facebook.com/GodrejSecure
• [Twitter] www.twitter.com/godrejsecure

An ISO 9001:2015, ISO 14001:2015, ISO 45001:2018

Products Marketed and Serviced by Godrej and Boyce Mfg. Co. Ltd.

GSS/IMC/SEETHRU Re7 V-SERIES USER MANUAL/DEC-2021/V1