JA-110P Wired PIR Motion Detector
This document has been machine-translated from the original English version. In case of any ambiguities or doubts, please refer to the original document. If you encounter any errors or have further questions, please contact the technical support department (contact details are at the end of this document).
The JA-110P product is a component of the JABLOTRON system. It is used to detect human motion inside buildings. The detection characteristics can be modified by using a different lens. The installation of the detector should be entrusted to a trained technician holding a valid certificate issued by an authorized distributor. ⚠️ Before connecting the detector to the bus, always switch off the power supply. The image shows the JA-110P detector. The detector has a main body with two mounting orientations labeled 'I' and 'II'. The main body has several numbered points indicating features: The internal PCB is also shown with numbered connection points and indicators: Depending on the type of control panel, use the recommended software or application – see the control panel instructions. JABLOTRON a.s. hereby declares that the JA-110P product complies with the relevant EU harmonization provisions: Directives No.: 2014/30/UE, 2011/65/UE, provided it is used as intended. The original Declaration of Conformity can be found on www.jablotron.com in the "Downloads" section. [WEEE symbol] Warning: Proper disposal of this product helps conserve valuable resources and prevent potential negative impacts on human health and the environment that could result from improper waste handling. Please return the product to the seller or contact your local authorities for detailed information on the nearest designated collection point. To obtain an electronic version of this document (available in other languages) or the JA-100 installer version, scan the enclosed QR code.Installation
Diagram Description: Fig. 1
Registration and Settings
Technical Data
Power From the control panel bus, 12 V DC (8...15 V) Operating environment Indoors Quiescent current consumption 5 mA Operating temperature range -10 °C to +40 °C Current consumption for selected cable (maximum) 10 mA Operating humidity 75% RH, non-condensing Recommended mounting height 2.5 m above floor Certifying body Trezor Test sro (No. 3025), KIWA Nederland BV Detection angle/detection range 110 degrees / 12 m (with standard lens) Complies with EN50131-1, EN50131-2-2, EN50130-4, EN55032, EN 50581, T 031 Dimensions 60 x 98 x 52 mm Recommended screw 2x Ø 3.5 x 40 mm (countersunk head) Weight 75 grams Classification Security Grade 2 / Environmental Class II (according to EN 50131-1) Declaration of Conformity
Disposal Information
QR Code Information
