Quick Start Guide
NOISZ by ILIFE
Positioning the Charging Dock
Place the charging dock against a wall and connect the adapter to an outlet. It is suggested to leave an area with at least 4 feet (1 meter) on each side of the charging dock, and at least 8 feet (2 meters) in front of the charging dock.
Do not place the charging dock around doors and stairs.
For optimizing performance of your robot, try best to place the charging dock in an open and uncluttered area.
[Diagram showing recommended clearance for the charging dock: 1 meter (approx. 4 feet) on each side and 2 meters (approx. 8 feet) in front.]
Wake Up and Charge Your Robot
Turn on the power switch at the side of the body, then place your robot on the charging dock for a full charge. When charging is finished, lights beside will turn off.
Always keep the power switch turned on during your daily use. Turn off the power switch only when you don't use your robot for more than one week.
[Illustration of the robot's side panel with power switch (ON/OFF) and charging indicator.]
Start Cleaning
Press ▶️ on the robot's body to wake it up and press ▶️ again to begin cleaning.
Scheduling
To set up a schedule for your robot, please read the detailed instruction in the user manual. To cancel a schedule, the easiest way is to turn off the power switch at the side of the body.
Important Tips
- Remove excess clutter from floors before cleaning (e.g., electronic cords, toys, liquids, etc).
❌ [Illustrations showing 'X' marks over tangled cords and a toy, indicating they should be removed before cleaning.]
- For better cleaning performance, empty the dust tank and clean the High Performance Filter after each use. The High Performance Filter cannot be washed with water. Replace with a new one when it is needed.
- In homes with heavily shedding pets, the dust tank may fill quickly with fur or hair. In these cases, you may need to empty the dust tank and clean filters more frequently.
[Illustrations of the robot's dust tank and its High Performance Filter.]
Customer Service
Customer Service Number: 1-800-631-9676 (Toll free for USA & Canada)
Email: support@iliferobot.com
