UL Listed Products | Paxton
Confirmation Letter UL CUSTOMER UL CUSTOMER FILE # CATEGORY PAXTON ACCESS LTD PAXTON HOUSE BRIGHTON, BN1 9HU United Kingdom BP10173 Access Control System Units | ALVY January 11, 2021 As of the above date, UL LLC confirms that PAXTON ACCESS LTD is the party associated with UL File # BP10173 that appears in the UL Product iQ platform. Public information contained in UL File # BP10173 can be viewed using the following link: https://iq.ulprospector.com/en/profile?e=1434 The appearance of a company's name or a specific product/component designation in the UL Product iQ platform does not in itself mean that product or component so specified or identified is subject to UL's Surveillance Program. The manufacturer's products are not covered under UL's Surveillance Program unless they bear the authorized UL Mark. Therefore, only those products bearing the appropriate authorized UL Mark or UL Recognized Component Mark, the authorized company name, tradename, trademark and product designation shall be considered as being covered by UL's Listing, Classification, or Recognition Service. If you have questions regarding this letter, please contact the UL Customer Experience Center at cec@ul.com. Sincerely, Leadership & Governance Team UL Product iQ UL LLC 333 Pfingsten Road, Northbrook, IL 60062-2096 USA T: 847.272.8800 / F: 847.272.8129 / W: UL.com 12/01/2021 ALVY.BP10173 - Access Control System Units | UL Product iQ ALVY.BP10173 - Access Control System Units Access Control System Units See General Information for Access Control System Units PAXTON ACCESS LTD PAXTON HOUSE HOME FARM ROAD BRIGHTON, BN1 9HU UNITED KINGDOM ANSI/UL 294 (6th ed.) Access Control Performance Levels BP10173 Model Product Type Access Control Example Line Conditions Security Destructive Standby and (Encryption) Attack Endurance Power Notes Net2 Paxlock Series Access Control Control 1 Unis: unit/Door Models 921-130-US+ (single), 921- Lock 430-US+ (4 pack) Model 921-131-US+ (single), 921- 431-US+ (4 pack) Model 921-160-US+ (single), 921- 460-US+ (4 pack) Model 921-161-US+ (single), 921- 461-US+ (4 pack) 1 4 1 None 010-121 Paxton10 Controller+ Control Unit 1 (Tested by UL with PHIHONG injector Models POE31U-1AT and PSA16U-480 (AF)) 1 4 2 None 010-519 Paxton10 Door Connector+ I/O Board 1 1 4 2 None 010-818 Paxton10 Reader+ Reader 1 010-504 Paxton10 Vandal Resistant Reader 1 Reader+ 010-7575 Paxton10 Door Connector Enclosure 1 Enclosure+ 010-335 Paxton10 Controller Wall Enclosure 1 Mount+ 010-601 Paxton10 SmartPoint Reader+ Reader 1 1 4 2 None 2 4 2 None N/A N/A N/A None N/A N/A N/A None 1 4 1 None https://iq.ulprospector.com/en/profile?e=1434 1/3 12/01/2021 ALVY.BP10173 - Access Control System Units | UL Product iQ 010-203 Paxton10 Alarm Interface Connector+ Relay Module 1 1 4 2 010-356 Paxton10 IO Connector+ Relay Module 1 1 4 2 Net2 Plus Access Control Units: 682- Control Unit 1 528-US, 682-493-US (Tested by UL with PHIHONG injector Models POE31U-1AT and PSA16U-480) 1 4 1 Access Control Readers: 345-220-US, Reader 1 371-110-US, 372-110-US, 373-110- US, 375-110-US, 390-135-US, 390- 747-US, 390-727-US, 400-150-US, 400-175-US, 400-275-US 1 4 1 PoE+ Splitter Power Supply: Z99-POE2 Power Supply 1 (Tested by UL with PHIHONG injector Models POE31U-1AT and PSA16U480)+ 1 4 1 Power Supply: Z99-1205+, Z99-1208+ Power Supply 1 1 N/A 3 Enclosure model 857-600-US+ Enclosure N/A 1 N/A N/A Access Control Units: 682-610-US+, 682-620-US+ Control Unit 1 1 4 3 Access Control Units: 682-630-US+ Control Unit 1 1 4 1 Access Control Units (subassemblies): Subassembly 1 857-610-US+ 1 N/A 3 Access Control Units (subassemblies): Subassembly 1 857-630-US+ 1 N/A 3 MK2 Series+ 900-120WT, 900-120BL , Single Point 1 900-130WT, 900-130BL, 900-140WT, Locking 900-140BL, 900-150WT, 900-150BL Access May be followed by "US" Control Units 1 4 1 Paxlock10 Series+, 900-640WT, 900- Single Point 1 640BL, 900-650WT, 900-650BL, 900- Locking 620WT, 900-620BL, 900-630WT, 900- Access 630BL May be followed by "US" Control Units 1 4 1 None None None None None None None None None None None Single Point Locking Device Level 1 Single Point Locking Device Level 1 ANSI/UL 294 (7th ed.) Access Control Performance Levels Model Product Type Access Control Example Line Conditions Security Destructive Standby and (Encryption) Attack Endurance Power Notes https://iq.ulprospector.com/en/profile?e=1434 2/3 12/01/2021 ALVY.BP10173 - Access Control System Units | UL Product iQ Access Control Readers: Paxton10 Reader 1 series 010-721+ Reader/Keypad, 010- 296+ Slimline Reader 1 4 1 Access Control Readers: 010-254 VR Reader 1 Reader 2 4 1 Access Control Units: 010-522-US Door Controller 24V, 2A PSU + 010495-US - Door Controller PoE + Control Unit 1 1 4 3 Access Control Units: 010-803-US - Control Unit 1 Video Controller 24V, 4A PSU + 010- 304-US - Video Controller PoE + 1 4 2 Access Control Unit (Subassembly): 010-403-US - Door Controller PCB only+ Control Unit 1 Subassembly 1 4 3 Access Control Unit Accessory (Subassembly): 010-552-US - Reader Converter PCB+ Subassembly 1 1 4 1 None None None None None None + Complementary Listed under UEHX7 Last Updated on 2020-06-11 The appearance of a company's name or product in this database does not in itself assure that products so identified have been manufactured under UL's Follow-Up Service. Only those products bearing the UL Mark should be considered to be Certified and covered under UL's Follow-Up Service. Always look for the Mark on the product. UL permits the reproduction of the material contained in the Online Certification Directory subject to the following conditions: 1. The Guide Information, Assemblies, Constructions, Designs, Systems, and/or Certifications (files) must be presented in their entirety and in a non-misleading manner, without any manipulation of the data (or drawings). 2. The statement "Reprinted from the Online Certifications Directory with permission from UL" must appear adjacent to the extracted material. In addition, the reprinted material must include a copyright notice in the following format: "© 2021 UL LLC" https://iq.ulprospector.com/en/profile?e=1434 3/3 12/01/2021 ALVY.GuideInfo - Access Control System Units | UL Product iQ ALVY.GuideInfo - Access Control System Units [Alarm System Units] Access Control System Units See General Information for Alarm System Units USE This category covers units for access control systems, providing a means of regulating or controlling physical entry into an area, or access to or the use of a device by electrical, electronic and/or mechanical means. Access control systems are investigated as a complete configuration based upon the manufacturer's specified system components. Access control systems are intended to comply with applicable life safety access and egress requirements. A wiring diagram is required to be provided with the control unit. Information regarding its intended application and suitable peripheral equipment that can be used to form an interrelated assembly is also provided. Reference is made in the marking of the control unit to the wiring diagram showing complete information, except when the installation wiring diagram is secured to the control unit. Systems and components may also be utilized in accordance with ANSI/NFPA 730, "Guide for Premises Security," and ANSI/NFPA 731, "Installation of Electronic Premises Security Systems." Systems may additionally be utilized in accordance with International Code Council codes (e.g., Building, Fire), the Transportation Security Administration standard, "Biometric Systems for Airport Access Control," the Radio Technical Commission for Aeronautics standard DO-230A, "Standards for Airport Security Access Control Systems," and the like. Other products covered under this category include egress control systems that are typically used in infant wards of hospitals to control unauthorized egress from controlled areas. PRODUCT MARKINGS Each product is marked to indicate its intended use. This consists of the term "Access Control Unit," or the specific product name or designation as shown in the individual certifications. PRODUCT IDENTITY One or more of the following product identities appears on the product: Commercial Security Equipment Commercial Security Equipment Subassembly Security and Fire Alarm Equipment (for products where the word "SIGNALING" is included in the Certification Mark) Security and Fire Alarm Equipment Subassembly (for products where the word "SIGNALING" is included in the Certification Mark) Security Equipment Security Equipment Subassembly Some of these products are also certified under other Signaling and Energy Management, Information Technology or Telephone categories. When applicable, the product identity may include "and Fire Alarm," "and General Signaling," "and Enclosed Energy Management," "and Information Technology" or "and Telephone," as appropriate (e.g., Security and Telephone Equipment). The product identities may be abbreviated as follows: Type EM (for Enclosed Energy Management Equipment) Type EM Subassembly (for Enclosed Energy Management Equipment Subassembly) Type F (for Fire Alarm Equipment) Type F Subassembly (for Fire Alarm Equipment Subassembly) https://iq.ulprospector.com/en/profile?e=206230 1/3 12/01/2021 ALVY.GuideInfo - Access Control System Units | UL Product iQ Type G (for General Signaling Equipment) Type G Subassembly (for General Signaling Equipment Subassembly) Type IT (for Information Technology Equipment) Type IT Subassembly (for Information Technology Equipment Subassembly) Type S (for Security Equipment) Type S Subassembly (for Security Equipment Subassembly) Type T (for Telephone Equipment) Type T Subassembly (for Telephone Equipment Subassembly) ADDITIONAL INFORMATION For additional information, see Security Equipment (ALOV). REQUIREMENTS The basic standard used to investigate products in this category is ANSI/UL 294, "Access Control System Units." UL MARK The Certification Mark of UL on the product or on the smallest unit container in which the product is packaged is the only method provided by UL to identify products manufactured under its Certification and Follow-Up Service. The Certification Mark for these products includes the UL symbol, the words "CERTIFIED," "SAFETY" and "SECURITY," the geographic identifier(s), and a file number. For products additionally investigated with respect to signaling applications, the word "SIGNALING" is included in the Certification Mark. Alternate UL Mark The Security Listing Mark of UL on the product or on the smallest unit container in which the product is packaged is the only method provided by UL to identify products manufactured under its Listing and Follow-Up Service. The Security Listing Mark for these products includes the UL symbol with the word "SECURITY" above the UL symbol and the word "LISTED" below the UL symbol (as illustrated in the Introduction of this Directory), a control number, and the product name "Equipment" or "Subassembly" with or without the word "Commercial." When applicable, the Signaling Mark is also included. The combined Security/Signaling Listing Mark consists of the Security Mark elements detailed above and the word "SIGNALING" above the UL symbol. The product name is "Security and Fire Alarm Equipment" or "Security and Fire Alarm Subassembly." Some of these products are also Listed under other Signaling and Energy Management, Information Technology or Telephone categories. When applicable, the product name may include "and Fire Alarm,""and General Signaling,""and Enclosed Energy Management,""and Information Technology" or "and Telephone," as appropriate (e.g., "Security and Telephone Equipment"). The product name may be abbreviated as follows: The word "Type:" followed by the appropriate Type Code (as shown below), additionally followed by "Subassembly," as applicable. S - Security Equipment F - Fire Alarm Equipment G - General Signaling Equipment EM - Enclosed Energy Management Equipment IT - Information Technology Equipment T - Telephone Equipment * * * * * * * * * * * * * * * * * * * * * * * * * https://iq.ulprospector.com/en/profile?e=206230 2/3 12/01/2021 ALVY.GuideInfo - Access Control System Units | UL Product iQ UL, in performing its functions in accordance with its objectives, does not assume or undertake to discharge any responsibility of the manufacturer or any other party. UL shall not incur any obligation or liability for any loss, expense or damages, including incidental or consequential damages, arising out of or in connection with the use, interpretation of, or reliance upon this Guide Information. Last Updated on 2014-09-03 The appearance of a company's name or product in this database does not in itself assure that products so identified have been manufactured under UL's Follow-Up Service. Only those products bearing the UL Mark should be considered to be Certified and covered under UL's Follow-Up Service. Always look for the Mark on the product. UL permits the reproduction of the material contained in the Online Certification Directory subject to the following conditions: 1. The Guide Information, Assemblies, Constructions, Designs, Systems, and/or Certifications (files) must be presented in their entirety and in a non-misleading manner, without any manipulation of the data (or drawings). 2. The statement "Reprinted from the Online Certifications Directory with permission from UL" must appear adjacent to the extracted material. In addition, the reprinted material must include a copyright notice in the following format: "© 2021 UL LLC" https://iq.ulprospector.com/en/profile?e=206230 3/3PDFsam Basic v4.1.4 SAMBox 2.1.16