Sinji Cordless Vacuum Cleaner

Description

The Sinji Cordless Vacuum Cleaner offers convenient and mobile cleaning without the restriction of a cord. Its lightweight design makes it easy to maneuver, eliminating the risk of tripping over cords or accidentally pulling appliances off surfaces.

Contents

• 1x Cordless Vacuum Cleaner
• 1x Wall mount
• 1x Adapter
• 1x Long crevice nozzle
• 1x Small 2-in-1 crevice nozzle
• 1x Big 2-in-1 crevice nozzle
• 1x Expansion screw set
• 1x Filter (installed)

Overview of the Appliance

1. Main handle

2. Power switch (normal power (I) and max power (II))

3. Battery

4. Dust container (cup)

5. Dust container bottom lid

6. Dust release button

7. Charging port

8. Extended tube release button

9. Suction inlet

10. Extended tube

11. Main roller brush / main main roller brush

12. Main roller brush release button

Overview of Manual Sections

1. Important safety instructions
2. Installing the wall mount charger
3. Charging
4. Operation instructions
5. Troubleshooting

1. Important Safety Instructions

To avoid potentially fatal electric shocks:

• Do not use the appliance outdoors or near water.
• Do not use the vacuum cleaner if the cord, plug, or housing is damaged.
• If the cord or plug is damaged, have it replaced by a qualified technician or contact customer service.
• Only have repairs done by a qualified technician. Do not try to open or repair the appliance yourself.
• Make sure the voltage of the power source matches the voltage listed in the technical data for the appliance before turning it on.
• Do not touch the power source or the appliance with wet or damp hands.
• Do not use an extension cord with the adapter; plug the adapter directly into a power socket.

To avoid the risk of injury:

• Do not change accessories while the appliance is turned on.
• Do not use the vacuum cleaner to vacuum up sharp objects or glass shards.
• Do not use the vacuum cleaner to vacuum up burning matches, ashes, or cigarette butts.
• Do not use the vacuum cleaner to vacuum up chemical products, stone dust, gypsum, cement, or similar particles.
• Do not use the vacuum cleaner to vacuum up liquids or water.
• Do not use the vacuum cleaner with flammable or explosive substances or with chemical or aggressive liquids.
• Store the appliance indoors in a dry location when not in use.
• Under extreme conditions, leaks in the battery cells may occur. If battery fluid comes into contact with skin or eyes, rinse the affected area with water immediately and seek medical attention.
• Children aged 8 and above, and people with reduced physical, sensory, or mental capabilities, can use the appliance if they are supervised and understand how to use it safely. Children should not play with the appliance and should not clean or perform maintenance on it without supervision.

Safety tips:

• Only use accessories recommended by the manufacturer.
• Do not use the adapter for any other purpose.
• Do not carry the wall holder or adapter by the cord.
• Do not pull on the cord to move the appliance.
• Unplug the appliance by grasping the power plug, not the cord.
• Make sure the ventilation slits are open. A blocked ventilation system can cause overheating and damage to the appliance.
• Do not use the vacuum without the dust filter inserted.
• Do not use the adapter for a different product or try to charge this appliance with a different charging station. Only use the charging station supplied with this appliance.
• Do not try to recharge non-rechargeable batteries.

2. Charging

The Sinji Cordless Vacuum Cleaner can be charged when you hang it in the wall mount. Make sure the adapter is plugged into the power socket.

3. Installing the Wall Mount

1. Determine how high you want to install the wall mount so the Sinji Cordless Vacuum Cleaner can hang on the wall (with the extended tube attached).
2. Mark the 2 drilling holes through the wall mount.
3. Use the two screws to mount the wall mount to the wall.
4. Place and hang the Sinji Cordless Vacuum Cleaner onto the mount.

4. Operation Instructions

3.1 Assembling:

1. Be sure to disconnect the Sinji Cordless Vacuum Cleaner from the charger before assembling the extended tube.
2. Take out the Sinji Cordless Vacuum Cleaner, extended tube, and main roller brush from their packaging.
3. Insert the extended tube into the suction inlet of the Cordless Vacuum Cleaner. You should hear a "click" when the extended tube is assembled correctly. Make sure the extended tube is inserted correctly before using the vacuum cleaner.
4. Attach the main roller brush to the extended tube. Insert the extended tube into the main roller brush and push the Sinji Cordless Vacuum Cleaner firmly towards the floor brush.

3.2 How to remove the extended tube

Make sure the unit is not connected to the charger. Then, push the extended tube release button (10) to remove the extended tube from the Cordless Vacuum Cleaner. Grasp the handle of the Cordless Vacuum Cleaner and pull it out of the extended tube. You can now use the Cordless Vacuum Cleaner on its own.

3.3 How to use

1. Make sure the vacuum cleaner is not connected to the charger. If the vacuum cleaner is charging or has a low battery, it will not work.
2. The Sinji Cordless Vacuum Cleaner can be used on its own or with the combined crevice nozzle.
3. Press the power switch to turn the vacuum on and off, or to alternate between the normal power (I), max power (II), and off.
4. Make sure the Sinji Cordless Vacuum Cleaner is properly connected to the extended hose and floor brush.
5. Turn the power on by pressing the switch on the main handle or the Sinji Cordless Vacuum Cleaner. Some models may have multiple power settings, which can be selected by pressing the switch again.
6. If your model has a power brush and an extension tube, you can use either one, depending on your preference.
7. Before using the vacuum cleaner, make sure it is not charging or has a low battery, as this may prevent the vacuum and main roller brush from functioning properly.

3.4 Empty and clean the dust container & dust filter

Note: To get the best performance, it is recommended to empty the dust container and clean the dust filter after a few cleaning sessions, depending on your situation.

1. Detach the extended tube from the Sinji Cordless Vacuum Cleaner by pressing the release button.
2. Press the dust release button (7) to empty the dust container.
3. Rotate the dust container's transparent cover so it faces the “unlock” marking, and remove the dust container and filter assembly.
4. Take out the upper HEPA filter and the plastic cyclone filter, wash them, and air dry them completely. Do not use a washing machine or hair dryer to clean or dry the filters.
5. Only place the dust filter back into the assembly when it is completely dry! Insert it into the dust container and push it firmly into place. Make sure the dust filter assembly is properly installed before using the vacuum cleaner.
6. Attach the dust container assembly to the Cordless Vacuum Cleaner and rotate it so it is locked.

It is recommended to clean or replace the filters and clean the cyclone system every three to six months, depending on usage, to ensure the best performance of the vacuum cleaner. The main roller brush should also be checked regularly, and any hair or other debris should be removed.

5. Troubleshooting

Compliance Information

CE marking indicates compliance with European directives applicable to this product.

This marking indicates that this product should not be disposed of with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmental safe disposal.