sonoff.tech/usermanuals
User Manual for SONOFF models including: SNZB-02D Zigbee LCD Smart Temperature Humidity Sensor, SNZB-02D, Zigbee LCD Smart Temperature Humidity Sensor, Smart Temperature Humidity Sensor, Temperature Humidity Sensor, Humidity Sensor
File Info : application/pdf, 9 Pages, 26.59MB
DocumentDocumentSNZB-02D Zigbee LCD Smart Temperature Humidity Sensor · ----------1 - 5 · English ----------6 - 10 · Warning ----------11 - 12 Introduction Signal indicator Display screen English Battery Stand Button Base Features SNZB-02D is a smart temperature and humidity sensor with LCD screen, allows you to see the real-time temperature and humidity on the screen and monitor the living conditions on the App, provides accurate measurements with ultra-high precision, ability to switch between and , store and export historical data, get alerts and notifications, voice commands, and set smart scenes to realize your home automation. High Accuracy APP Monitoring / Reading Switch Data Store & Export Alert & Notification 6 Voice Command Pair to SONOFF Zigbee Gateway English 1. Download the eWeLink App Please download the "eWeLink" App in Google Play Store or Apple App Store. 2. Power on Pull out the battery insulation sheet to power the device on. If the device is the No battery version, please install the battery (CR2450) to power the device on. 3. Pair SONOFF Zigbee gateway to your eWeLink account 7 4. Add the device to Zigbee Bridge English Tap "Add" on the main page of Zigbee Bridge on your eWeLink App, and long press the button on the device for 5s until the Zigbee signal icon flashes, now the device is entered the pairing mode and waiting to be added. The pairing time is 30s, when the device is added successfully, the Zigbee signal icon will keep on. If the device is failed to be added, please move the device closer to the Bridge and add it again. Effective Communication Distance Verification Place the device in your desired place and press the device's pairing button, then the signal indicator on the screen keeps on, which means the device and the device (router device or gateway) under the same Zigbee network is in the effective communica- tion distance. 8 Specifications Model Power supply Battery model Wireless connection Working temperature Working humidity LCD dimension Casing material Product dimension SNZB-02D 3V button cell x 1 CR2450 Zigbee 3.0 -9.9~60 5%-95% RH, non-condensing 2.8" PC+LCD 59.5x62.5x18.5mm English Button action description Action Double-press Long-press for 5s Description Switch unit readings (factory default is ) Restore factory settings and enter Zigbee network pairing mode again Default comfort level Dry Wet Cold Hot Humidity 40%RH Humidity 60%RH Temperature 19/66.2 Temperature 27/80.6 9 Installation English Max 1. Place on the desktop 2. Install with base 2-1. Attach to the metal surface with the magnetic base 2-2. Stick on the wall with 3M adhesive base Battery replacement 3M adhesive tape 10 Warning "Do not ingest battery, Chemical Burn Hazard." This product contains a coin / button cellbattery. lf the coin / button cell battery is swallowed, it can cause severeinternal burns in just 2 hours and can lead to death. Keep new and used batteries away from children.lf the battery compartment does not close securely, stop using the productand keep it away from children. lf you think batteries might have been swallowed or placed inside any partof the body, seek immediate medical attention. FCC Warning Changes or modifications not expressly approved by the party responsible for compliance could avoid the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. 11 Warning IC Warning This device complies with Innovation, Science and Economic Development Canada licence-exempt RSS standard (s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le onjunc areil est conforme aux CNR d' l'innovation, la science et le développement économique Canada licables aux areils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: (1) l'areil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, onj si le brouillage est susceptible d'en compromettre le fonctionnement. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Tous les changements ou modifications non expressément approuvée par le responsible de la conformité pourrait vider l'utilisateur est habilité à exploiter l'équipemen. ISEDC Radiation Exposure Statement: This equipment complies with ISEDC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Cet appareil est conforme aux limitesd'exposition de rayonnement RF ISEDC établiespour un environnement non contrôlé. Cetémetteur ne doit pas être co-implanté oufonctionner en onjunction avec toute autreantenne ou transmetteur. 12 Hereby, Shenzhen Sonoff Technologies Co., Ltd. declares that the radio equipment type SNZB-02D is in compliance with Directive 2014/53/EU.The full text of the EU declaration of conformity is available at the following internet address: https://sonoff.tech/usermanuals Operation frequency Range: 2405-2480MHz(Zigbee), 2402-2480MHz(BLE) RF Output Power: 5dBm(Zigbee), 5.5dBm(BLE)