Overview
The Altronix ACM Series Access Power Controllers with Power Supplies are designed to distribute and switch power to access control systems and accessories. These units convert a 115VAC 60Hz input into eight (8) independently controlled 12VDC or 24VDC fuse-protected outputs. They can be configured for Fail-Safe and/or Fail-Secure modes and feature a FACP Interface for Emergency Egress and Alarm Monitoring.
Models Included
- AL400ULACM: 12VDC @ 4 amp or 24VDC @ 3 amp, Fused Outputs
- AL600ULACM: 12VDC or 24VDC @ 6 amp, Fused Outputs
- AL1012ULACM: 12VDC @ 10 amp, Fused Outputs
- AL1024ULACM: 24VDC @ 10 amp, Fused Outputs
For a red enclosure, add an "R" suffix to the part number (e.g., AL1024ULACMR).
Key Features and Specifications
- Eight (8) independently controlled outputs.
- Outputs can be configured as Fail-Safe or Fail-Secure.
- Eight (8) form “C” 5 amp rated relay outputs.
- Eight (8) auxiliary power outputs (unswitched).
- Fire Alarm disconnect feature is individually selectable.
- Built-in charger for sealed lead acid or gel type batteries.
- Automatic switch over to stand-by battery when AC fails.
- Thermal and short circuit protection with auto reset.
- AC input and DC output LED indicators.
- AC fail supervision and battery fail/presence supervision.
Installation Notes
Wiring methods must comply with the National Electrical Code/NFPA 70/NFPA 72/ANSI, and all local codes. Product is intended for indoor use only. Ensure proper grounding and separation of power-limited and non-power-limited wiring. Refer to the detailed diagrams and tables within this guide for specific connection instructions.
For more information, visit the Altronix website.
