Anko Mosaic Frame Craft Kit Instruction Manual
106x150mm (折后尺寸)
Kit Includes
- 1 x MDF photo frame
- 1 x glass mosaic tiles
- 1 x grout
- 1 x scraper
- 1 x tube of glue
- 1 x mixing bowl
- 1 x sponge
- 1 x wooden stick
- 1 x instruction sheet
Tips
- Clean the MDF base & tiles with a damp cloth before beginning.
- Cover the work area with disposable paper or a mat.
- Keep the gaps between tiles approximately 3mm or less.
- Ensure grout is completely dry before using frame.
How To Make A Mosaic Frame
Place the tiles on the MDF base in your desired pattern, leaving small gaps between tiles.
Glue each tile onto the base and allow approx. 30 minutes for the glue to dry.
Pour the grout into the mixing bowl. Gradually add water while stirring until it forms a paste texture. 1 bag of grout requires approx. 40ml of water.
Using the scraper, apply the grout to cover the tiles completely. Spread the grout to fill all of the gaps. Scrape off excess grout from the top of the tiles.
Wet the sponge with warm water and clean the tiles until they are clear of grout, leaving grout only in the gaps. Allow approx. 5 hours for the grout to dry.
Clean off any remaining grout. Then the mosaic frame is complete and ready to use.
Guide Image
MADE IN CHINA
CUSTOMER SERVICE:
KMART AU: 1800 124 125
KMART NZ: 0800 945 995
TARGET AU: 1300 753 567
KEYCODE: K: 43-557-677 T: 71-023-380
