Features
This remote uses 2.4 GHz frequency. It is compatible with specified Mi-Light/MiBoxer smart lights and controllers.
Parameters
Product Name: Color Temperature Remote Control (full button)
- Model No.: FUT007
- Voltage: 3 V (AAA x 2 pcs)
- Transmission Frequency: 2.4 GHz
- Modulation Method: GFSK
- Transmitting Power: 6 dBm
- Standby Power Consumption: 5 uA
- Control Distance: 30 m
- Size: 53mm x 21mm x 110.5mm
[Diagram: Remote front view outline]
Width: 53mm
[Diagram: Remote side profile]
Thickness: 21mm
[Diagram: Remote length dimension]
Length: 110.5mm
Remote Diagram
The remote control features the following buttons and their functions:
- Master ON: Top circular button.
- Master OFF: Second circular button.
- Brightness +: Located on the right side of the central ring.
- Cool white +: Located on the top side of the central ring.
- Brightness -: Located on the left side of the central ring.
- Warm white +: Located on the bottom side of the central ring.
- Zone ON / Zone OFF: Four rectangular buttons labeled 1, 2, 3, 4 at the bottom.
Model: FUT007
Pairing Instructions (light shown, controller similar)
Step 1: Switch off the light or controller for 10 seconds. Then, switch the light or controller on.
[Diagram: Light bulb connected to power, showing 'Power' label]
Step 2: Press the desired zone "I" button 3 times within 3 seconds of applying power.
[Diagram: Remote control showing 'Link/Unlink button' and zone buttons, with an arrow pointing to a zone button]
Step 3: Connected lights blink 3 times slowly to indicate pairing is successful.
[Diagram: Connected light bulb showing blinking effect]
⚠️ If the light does not blink slowly, then the pairing process failed. Switch off the light and follow the steps again.
Unpairing Instructions (light shown, controller similar)
Step 1: Switch off the light or controller for 10 seconds. Then, switch the light or controller on.
[Diagram: Light bulb connected to power, showing 'Power' label]
Step 2: Press the zone "I" button 5 times within 3 seconds of applying power.
[Diagram: Remote control showing 'Link/Unlink button' and zone buttons, with an arrow pointing to a zone button]
Step 3: Connected lights blink 10 times quickly to indicate unpairing is successful.
[Diagram: Connected light bulb showing blinking effect]
⚠️ If the light does not blink quickly, then the unpairing process failed. Switch off the light and follow the steps again.
Grouping Several Lights
Users can add endless numbers of lights to a zone on the 4-channel remote by linking the lights to different zones. Create different group combinations using the examples below.
[Diagram: Three table lamps and one ceiling light connected to Zone 1]
[Diagram: Two table lamps and one ceiling light connected to Zone 1, one table lamp connected to Zone 2]
[Diagram: Two table lamps and one ceiling light connected to Zone 1, one table lamp connected to Zone 2, one table lamp connected to Zone 3]
Control Functions
- To dim all dual white lights at once or change the color temperature, first press 'Master ON'.
- To do this with individual lights, first press 'Zone ON'. Second, set the adjustment for color temperature or brightness.
- To turn on the night light mode of a single (dual white) light, press and hold the 'Zone OFF' from one of the 4 Zones.
- To turn on all the lights in night light mode, press and hold 'Master OFF'.
Safety and Notes
- The user can reprogram freely as needed. One remote can control multiple lights or controllers, but one light or controller can be controlled by a maximum of 4 remotes.
- Please check the battery installation and controller (ensure it is fully discharged if necessary) when you program after switching off and switching on.
- This remote can control only specified Mi-Light/MiBoxer products. Not all Mi-Light / MiBoxer series can work with this remote.
- During remote use, the indicator light may lag when batteries are low.
- This 2.4 GHz remote is not meant to be used in humid, high temperatures, dry, static, dusty, or high voltage environments. Indoor Use only.
- Do not use the remote in areas with wide-range metal or strong electromagnetic waves. This will harshly affect the controlling distance.
