Kreafunk aGO fabric 2 Bluetooth Speaker

Product Overview

The aGO fabric 2 is a compact and stylish Bluetooth speaker designed for portable audio experiences. It features a fabric front and a durable build, made from recycled materials.

Key Features

• Bluetooth connectivity for wireless audio streaming.
• Rechargeable Lithium battery for extended playtime.
• USB-C charging port.
• Stereo Play (TWS) capability for enhanced audio.
• Water-resistant design (IPX5).
• Made from 100% recycled ABS plastic and 98% recycled polyester fabric.

Charging Your Device

To charge your aGO fabric 2, use the included USB-C cable. Connect it to a power source. The charging indicator light will turn orange while charging and green when the battery is fully charged (100%). It is recommended to charge the device fully before the first use.

Charging Indicator:

• Orange: 0-99%
• Green: 100%

Battery Status

The battery indicator is located on the top of the speaker. It lights up white when the speaker is turned on. The light turns red when the battery level drops below 10%.

• Red: 0-10%
• White: 10-100%

Basic Operation

Powering On/Off

To turn the speaker on or off, press the power button located on the side of the device once. The small light will blink when the device is powered on.

Listening via Bluetooth

1. Turn on your aGO fabric 2. The indicator light will blink, indicating it is in Bluetooth pairing mode.
2. On your device (smartphone, tablet, etc.), go to Bluetooth settings.
3. Find "aGO 2" in the list of available devices and select it to connect.
4. The indicator light will turn solid white once connected successfully.

Manual Bluetooth Pairing

To manually connect the aGO fabric 2 to Bluetooth, press and hold the power button for 2 seconds.

Play/Pause

To play or pause the sound, press the power button twice.

Changing Tracks

To change to the next or previous track, press and hold the plus (+) or minus (-) button for 2 seconds.

Adjusting Volume

To adjust the volume, press the plus (+) button to increase volume or the minus (-) button to decrease volume.

Phone Calls

• Answer/End Call: Press the power button once.
• Reject Call: Press and hold the power button for 2 seconds.

Voice Assistant

To activate your device's voice assistant (e.g., Siri, Google Assistant), press the power button three times.

Stereo Play (TWS)

Activating Stereo Play

1. First, remove your aGO fabric 2 from your Bluetooth list on your device.
2. Press the power button once on both speakers simultaneously.
3. On Speaker 1, press and hold the power button until it makes a sound. While still holding the power button, press the plus (+) button once, then release both buttons. The indicator light will turn purple.
4. On Speaker 2, press and hold the power button until it makes a sound. While still holding the power button, press the minus (-) button once, then release both buttons. The indicator light will turn blue.
5. On your device, find "aGO 2" in the Bluetooth list and connect to it. Only one "aGO 2" should be visible. If two are visible, repeat the process.

Deactivating Stereo Play

To turn off Stereo Play, press the power button five times on either speaker.

Resetting the Device

To reset your aGO fabric 2 to factory settings, first remove it from your Bluetooth list. Then, press and hold the power button for 8 seconds.

Technical Specifications

• Materials: 100% recycled ABS plastic, 98% recycled polyester (fabric)
• Water Resistance: IPX5
• Dimensions: 80*39 mm (Ø*H)
• Weight: 180g
• Speaker Output: Ø53 mm, 4Ω, 6W
• Playing Time: Up to 10 hours
• Charging Time: 2-3 hours
• Battery: Built-in Lithium battery, 3.7V, 1000mAh
• Bluetooth Version: 5.1
• Bluetooth Range: Up to 10 meters
• Input Power: 5V / 1A
• Frequency Band: 2402-2480 MHz
• Maximal Radio Frequency Effect: <3 dBm

Safety and Maintenance Instructions

Please read the manual carefully before use. Keep these instructions for future reference. Keep the product away from heat sources, direct sunlight, and extreme cold. Do not expose to liquids. Clean with a dry cloth only after powering off and unplugging. Do not disassemble the product. Use only 5V/1A power supplies. Do not dispose of batteries improperly or near heat sources.

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.

FCC ID: 2ACVC-AGOII

Contact Information

Kreafunk ApS
Karupvej 6
8000 Aarhus C
Denmark
www.Kreafunk.com
info@Kreafunk.dk
+45 96 99 00 20