Tera P600 Mobile Data Terminal

About the Terminal

Introducing the Tera P600: A sleek, full-touch handheld terminal designed to help businesses provide speed workflows such as in-store merchandising, and order picking for in-store pickup or delivery. Powered by the Android ™ 11 operating system and equipped with a high-performance octa-core chipset, fast Wi-Fi, and 4G LTE connectivity, the P600 offers a seamless user experience.

Moreover, the P600 offers the added benefit of a warm swap battery feature and delivers real-time connectivity and advanced data capture with Bluetooth wireless radio technology that includes Bluetooth Low Energy, and integrated Near Field Communication (NFC) technology. This broad spectrum of capabilities makes it an ideal solution for applications spanning logistics, warehousing, retail, and beyond.

Terminal Features

The front, back and side view of the P600 are shown as follows:

• Volume Up/Down Buttons
• Left Scan Button
• Power Button
• Custom Button
• Right Scan Button
• Speaker (Handset Receiver)
• Front Camera
• Indicator Light
• Sensor (Proximity, Light)
• Rear Camera
• Scan Engine
• NFC Antenna
• Loudspeaker
• Expansion Ports
• Battery Latch
• SIM and TF Card Slot
• Battery Compartment

Buttons and Description

The P600 features several buttons for operation:

• Power Button: Press and hold to turn the device on/off or access the power options menu.
• Scan Buttons (Left & Right): Used to initiate barcode scanning.
• Volume Up/Down Buttons: Adjusts the audio volume.
• Custom Button: Can be configured for specific functions.

System Architecture

CPU: Qualcomm Snapdragon 662, Octa-core, 2.0GHz

Operating System: Android 11

RAM: 4GB

ROM: 64GB

Storage Expansion: Micro SD card

Environmental Specifications

Operating Temperature: -20℃ to 50℃ (-4°F to 122°F)

Storage Temperature: -40℃ to 70℃ (-40°F to 158°F)

Humidity: 5%RH - 95%RH (Non-condensing)

Sealing: IP67, IEC sealing standard

Drop Test: Multiple drops to concrete at room temperature from 1.5m / 4.9 ft.

Electrostatic Discharge (ESD): +/-15 kV air discharge, +/-8 kV direct discharge

Connectivity

WAN: 2G/3G/4G

WLAN: IEEE 802.11 a/b/g/n/ac/ax ready/d/e/h/i/j/k/r/v/w (2.4G/5G Dual band WIFI)

Bluetooth: Bluetooth 5.1, Bluetooth Low Energy (BLE)

Interface: USB Type-C

Data Collection

Scan Engine: Honeywell Scan Engine

NFC: ISO 14443 Type A and B

Camera: Rear 16MP autofocus camera; flash LED

Install the Battery

1. Insert the charged battery pack into the battery compartment. The bottom of the battery must go in first.
2. Press the battery down into the battery compartment until the battery release latches snap into place.
3. Slide the battery latch to the left.
4. Remove the battery from the battery compartment.
5. Slide the battery latch to the right. The battery ejects slightly.

Caution: Improper battery replacement or incompatible device usage may result in risk of burns, fire, explosion, or other hazard. Dispose of lithium-ion batteries according to local regulations. Risk of fire and burns if improperly handled. Do not open, crush, heat or incinerate.

Remove the Battery

1. Press and hold the Power button until the options menu appears.
2. Tap Power off.
3. Slide the battery latch to the left.
4. Remove the battery from the battery compartment.
5. Slide the battery latch to the right. The battery ejects slightly.

Charge the Terminal

This device comes with a USB Type-C port, and it is recommended to charge the device using the provided original USB cable and power adapter.

Begin by connecting the USB cable to the power adapter, and then connect it to the terminal.

The terminal will start charging automatically, and the LED Indicator will display the current charge status. If the LED indicator is solid red, it means that the terminal is charging; if the LED indicator is solid green, it indicates that the terminal is fully charged.

You also have the option of using the original USB Type-A to USB Type-C cable to charge the terminal from a host device, such as a laptop or desktop computer. However, please ensure that the connected host device can supply a minimum power output of 5V and 0.5A to the terminal.

Note: Avoid using third-party cables or adapters to charge the terminal for optimal performance and safety.

Using the terminal while charging the battery increases the time required to reach a full charge. If the mobile terminal is drawing more current than supplied by the charging source, charging will not take place.

Battery Details:

• 5000 mAh removable li-ion battery
• Standby: over 300 hours
• Continuous use: over 12 hours (depending on user environment)
• Charge time: 2.5 hours (with the original adaptor and USB cable, QC 3.0)

About Near Field Communication (NFC)

NFC tag reader/writer mode: The terminal reads and/or writes digital information from or to an NFC tag.

NFC technology provides the ability for short-range, wireless data transfer between the P600 and NFC tags or other NFC enabled devices placed in close proximity to the back of the terminal.

The P600 supports the following mode of operation:

• NFC tag reader/writer mode

About the BCScan Application

To modify the scan profile or assess the scan engine's performance, you must launch the BCScan application. Below is a screenshot showcasing the application's primary interface.

BCScan is a demonstration application designed to test scan performance and manage the scan engine. Please be aware that not all barcode symbologies are activated by default in the BCScan app. If a barcode fails to scan, it is possible that the correct symbology is not enabled.

By default, the integrated scan engine is enabled for scanning. It supports omni-directional barcode scanning, and an aiming beam is provided to help assist with targeting barcodes.

If you need to enable or disable symbologies, DPM Mode, or OCR Mode, please tap on the Symbology Settings option to access further settings.

If you require data format modifications such as adding a prefix or suffix, or removing characters, please tap on the Label Formatting option to access additional settings.

In the Demo app, tap in the upper left corner of the screen to obtain further information regarding each scan result. The scan results will appear in the upper box and the related information regarding the scanned barcode including symbology, decoding time and message length will show up in the fields underneath the box.

If you need to check scanning accuracy, please tap previous scan and the current scan so as for the user to identify if the scans are the same.

To set up the scan engine, please tap to access scanner settings.

If you have completed the setup process for a device and would like to install the same configuration on another device, please follow these steps:

• Launch the BCScan app on the target device.
• Navigate to the scanner settings within the app.
• Tap , and choose the "Export Config" option
• Locate the exported file and transfer it to the desired device.
• Select the "Import Config" option to load the previously exported file.

Specifications

Mechanical

Battery

SIM Card Tray

Audio

Camera

Need Support?

Issue with missing or damaged items?

Email: info@tera-digital.com

Website: https://www.tera-digital.com

Phone: +1(626)438-1404