The Tpyesss Portable Wireless Speaker features a cuboid design with two prominent circular speaker grilles on its front face, arranged vertically. A control panel is situated between these grilles, featuring several small circular buttons and a horizontal array of eight small indicator lights. The right side of the speaker houses various input/output ports and an additional smaller circular grille. A sturdy handle is integrated into the top of the speaker for portability.
Matters Needing Attention
In order to use the player correctly and ensure that it performs well, please read and observe carefully:
- Do not hit the host severely.
- Do not touch benzene, thinners, and other chemicals. Please keep away from strong magnetic and electric fields.
- Please avoid direct light or heating appliances.
- Do not disassemble, repair, or modify by yourself.
- Please sort and properly dispose of waste packaging, batteries, and old electronics.
- Do not expose the product to rain or damp conditions to prevent fire or electric shock.
Precautions for the Charging
- Insert one end of the power cord into the [5V] socket of the machine, and insert the other end of the USB into a matching plug or computer. The "red light" is on when charging, and it goes out when it is fully charged.
- It is recommended that the product not be played while charging, so as not to charge for a long time and shorten the battery life.
- Do not put water containers next to the charger, so as to avoid water splashing and causing short circuit of the charger, resulting in overheating, leakage, and malfunction.
- Do not put heavy objects on the power cord or try to modify the power cord, otherwise it may cause electric shock or fire.
- When charging, please use a charger not exceeding 5V/2A, otherwise it may shorten the battery life or damage the machine.
- The speaker has a built-in charging protection circuit, which allows it to be connected to a computer or charger for a long time, taking about 3-4 hours to be fully charged. Usually, the battery life is between 16-18 hours; the duration will vary depending on the time of LED light usage and volume playback level.
- When the battery power is low, the system will automatically shut down. Please charge in time. If the machine is not used for a long time, please charge it at least once a month to protect the battery and prolong its life.
Speaker Connection
- Wireless speaker connection: Turn on the speaker device, turn on the wireless connection function of the mobile phone, and search for the wireless device "BA-02". (No need to enter a password, connect directly).
- TWS connection:
- When a new machine is dual-connected for the first time, long press the TWS button (∞ logo) for both machines. When "TWS cleared" is heard, pairing is in progress. When pairing is successful, "TWS paired" will be heard. (Under normal circumstances, pairing is successful within 6 seconds, but greater environmental interference may prolong pairing time).
- If the two devices have been connected, turn them off and on again; the machine will automatically interconnect, no need to re-connect.
- If TWS is disconnected or reconnected, the host needs to be operated (the host is the device controllable by Bluetooth, and the slave is the one that needs to be paired).
- Other connections: The machine automatically detects and recognizes external devices when turned on, and enters the wireless connection AUX mode after being turned on. When a TF card or USB is inserted, it automatically recognizes the playback. The latter has priority. Playback mode can also be switched manually; the audio signal line does not automatically switch through the [M] Key to play in AUX mode.
Jack Description
The speaker features the following ports and controls:
- MIC Microphone Interface Ø3.5
- DC 5V Power Port
- TF TF Card Port
- AUX 3.5mm Auxiliary Audio
- USB USB Type-A Port
- ON/OFF Speaker On/Off Switch
Speaker Controls
The front panel of the speaker includes various buttons and indicators:
- V+ Turn right to increase the volume.
- V- Turn left to decrease the volume.
- ◀◀ Play previous song.
- ▶▶ Play next song.
- ▮▮ Pause playback.
- BASS Turn on/off the BASS effect.
- ☀ Change lighting effect.
- ∞ Long press to turn on TWS (True Wireless Stereo).
- M Change playback mode.
- ◯◯◯◯◯◯◯◯ Battery level display (eight small circles indicating charge).
Basic Parameters
| Parameter | Value | Parameter | Value |
|---|
| Speaker type | Portable Wireless Speaker | Item Weight | 7.2lb |
| Exterior design | Cuboid | Item Color | Black |
| Light Type | RGB/LED | Charging Cable | USB Type-C |
| Active/Passive | Active | Product Dimensions | 10.9*6*7.9 inches |
| Control Method | Knobs and Buttons | Soundtrack System | 1.0 |
| Features | Wireless Connection Electronic Devices, Support TF Card, AUX, USB, MP3 Music Playback |
Technical Parameters
| Parameter | Value | Parameter | Value |
|---|
| Frequency Response | 45Hz-20KHz | Signal-to-Noise Ratio | ≥100db |
| Output Power | 80W (Peak) | Impedance | 4Ω |
| 4 inches*2, 3 inches*2 | Distortion | 1% |
| Transmission Distance | 33 Foot | Play Time (50% volume) | 16-18h |
| Power Supply | DC5V/2A Lithium Battery | LED Light Play Time | 12-14h |
| Battery Capacity | 5000mAh /7.4v | Charging Time | 5-6h |
| Audio Interface | 3.5mm AUX | Connection Version | 5.0 |
Package List
- 1 x Wireless Portable Speaker
- 1 x AUX 3.5mm Audio cable
- 1 x USB Type-C cable
- 1 x User manual
Questions and Answers
- Q: Why does the speaker automatically shut down?
- A: It will stop working when the battery is low. If the battery is low, please charge it in time. It is recommended to use it after 6 hours of charging.
- Q: Why can't it charge?
- A: Please connect the speaker and power supply correctly. It is recommended to use the supplied USB cable and make sure the adapter is 7.5V.
- Q: Why is there no sound from the speakers?
- A: Make sure the speaker is in TF/wireless connection/AUX mode, in the playback state, and adjust the volume to an appropriate level.
- Q: What are the potential reasons for the absence of sound in the speaker AUX?
- A: 1. Please use this machine to distribute the audio cable, and select the correct audio output interface. 2. If a TF card or USB disk is inserted, it will not automatically enter AUX mode; the [M] key must be pressed to switch to AUX mode. 3. Check if the volume of the external audio source device is turned on.
- Q: Why doesn't the product establish a Bluetooth connection automatically?
- A: 1. Automatic connection only occurs with previously paired devices. 2. If the stereo is turned on and no Bluetooth device is detected within 10 seconds (e.g., Bluetooth mode is not activated on a smartphone), it will not establish an automatic connection.
- Q: What are the possible causes for the lack of sound in Bluetooth mode?
- A: 1. Firstly, ensure that the wireless Bluetooth connection has been successfully established. 2. Secondly, make sure to simultaneously activate the volume on both the Bluetooth device and the speaker.
After-Sales Service
If the product has quality problems, it will be returned for half a year, guaranteed for one year, and free consultation for life. Tpyesss welcomes consultation.
If customers are satisfied with the service, Tpyesss appreciates comments on its service. Customer participation and recognition are a great motivation.
If customers are not satisfied with the product or service, Tpyesss encourages them to contact the company in time to address specific problems and provide better solutions.
Tpyesss is happy to help answer any questions about the product. Customers are welcome to write to Tpyesss or visit its official website for support. Friendly support will be provided.
Tpyesss values sincere advice from its customers and other buyers regarding its products. If time permits, customers are encouraged to share their thoughts. Tpyesss may prepare some surprises as well.
Contact Information
Enterprise Mailbox: btspeakerservice@gmail.com
Tpyesss
Models: Bluetooth Speakers, Speakers
