Immax PEACOCK LED Bedside Lamp

Product Overview

The Immax PEACOCK is an LED bedside lamp featuring a clock, RGB lighting, and a USB port. It is designed to provide ambient lighting, wake-up simulation, and natural sounds.

Product List

Visual representation of included items: The lamp, a USB cable, and a user manual booklet.

• Lamp
• Cable
• User Manual

Note: Product illustrations are schematic and may differ slightly from the physical product due to upgrades.

Product Introduction & Controls

Diagram showing the lamp with labeled controls:

• Night Light Button / Snooze Button
• White Noise Button
• Backlight Adjustment Button
• RGB Light Switch and Mode Button
• SET Button
• MODE Button
• Speaker
• Power Port
• USB Output Port
• UP Button
• DOWN Button
• Battery Cover

Specifications

• Power Adapter: PD 20W
• Night Light Power: 7W
• Color Temperature: 3000K
• CRI: >80
• LED Count: 36PCS + 35PCS
• USB Output: 5V/2.1A
• Luminous Flux: 300lm

Safety Precautions

• Clean the surface with a soft cotton cloth; avoid corrosive solvents.
• The light source is irreplaceable. Discontinue use if worn out.
• Do not disassemble the product if it malfunctions; contact the manufacturer for maintenance.

Power Connection

Connect the power adapter (PD or QC protocol recommended) using the provided cable. The external cable cannot be replaced. Do not use if the cable is damaged. Avoid using on slopes greater than 6 degrees.

Upon powering on, the lamp enters "normal time mode", displaying AM 12:00 in 12-hour format. Both alarms are set to wake-up light and alarm mode at AM 7:00.

Display Analysis

The display shows time, alarm status (Alarm 1 for weekdays, Alarm 2 for weekends), day of the week (e.g., MON), and AM/PM indicators.

Functions

Night Light Function

Short press the night light button to turn on the night light. Long press to dim the light steplessly. The function can be activated when the alarm and wake light are not running.

RGB Light Function

Short press the RGB light button to cycle through modes (default is last used mode). Long press to turn off RGB light. Modes include gradient and marquee effects.

Display Sounds

Features 7 types of natural sounds. Sounds can play for 30, 60, or 90 minutes. The snooze function dims the night light and gradually fades sound until it turns off five minutes before the set time. RGB light also turns off automatically.

Time Setting

In normal state, press the "SET" button to enter time setting. Use "SET" to cycle through hours, minutes, year, month, and day. Use "UP" and "DOWN" buttons to adjust values. Pressing "MODE" or no button for 30 seconds exits setting mode.

12/24 Hour Mode Switchover

In normal state, press the "UP" button to switch between 12-hour and 24-hour time formats.

Alarm Clock and Snooze Mode

Press the "MODE" button to enter alarm mode. Press "DOWN" to quickly turn alarms on or off. Use "DOWN" to switch between Alarm 1 (weekdays) and Alarm 2 (weekends). When an alarm is triggered, it sounds for 10 minutes. Pressing the snooze button pauses the alarm temporarily. During an alarm, pressing the white noise, RGB light, or backlight buttons cancels the alarm sound.

The wake-up light function activates 10 minutes before the set alarm time, gradually increasing brightness. Pressing specific buttons during wake-up stops the function.

Note: Ensure the correct date is set for alarms to function properly.

USB Output

Provides a maximum USB-A output of 10.5W (5V/2.1A) for charging devices.

Backlight Brightness Adjustment

The default backlight brightness is 100%. Pressing the backlight button cycles through brightness modes: High, Low, High.