MCS300 Dehumidifier
Product Information: MCS300+C300
Features
- Requires minimal floor area.
- Advanced user friendly control panel and display.
- Easy monitoring of energy consumption.
- Built-in safety function: fault signals for temperature control and tripped thermostat.
- Simplified maintenance: no need to open unit.
- Humidistat plug with low voltage.
Munters Dehumidifier with Air Cooled Condenser
Product Description
The MCS300 dehumidifier with an air-cooled condenser is designed to efficiently dehumidify air in enclosed spaces. Its compact construction allows for extended periods of operation with minimal maintenance. The design facilitates easy transport by one person to and within the spaces to be dehumidified.
As standard, an advanced control panel for easy and user-friendly control of different functions is fitted. An energy consumption monitor, which can be reset, makes it possible to measure the consumption (kWh) during a specific period. Its rugged formed metal frame and access panels are produced from stainless steel.
The electrical control system conforms to EN 60204 (IEC204) standards, and the electrical components are assembled behind the control panel. MCS300 dehumidifiers conform to both harmonized European Standards and to CE marking specifications.
Munters Rotor Technology
The desiccant rotor is manufactured from a corrugated composite material that is highly effective at attracting and holding water vapour. Every Munters dehumidifier applies a unique rotor technology. Airflows, air conditions, rotor sections, and rotor rotation speeds are optimized for specific applications.
An innovative control system maximizes the unit's energy efficiency. A characteristic of the MCS300 rotor technology is an efficient air distribution chamber, which divides the sectors and balances the dehumidification and reactivation airflows.
Model MCS300+C300 Details
Diagram measurements are for reference only. Scaled and dimensioned AutoCAD drawings are available in Munters' DryCap program.
Dehumidification Capacity
Approximate capacity in kg/h at different inlet process air relative humidity, % RH.
Dimensions and Weight
| Parameter | Value |
|---|---|
| Width (A/B) | 400/810 mm |
| Width (C) | 400 mm |
| Height (D/E) | 550/605/619 mm |
| Dry Air Outlet | 125 mm |
| Weight | 25+21 kg |
Technical Specification
Process Air
| Specification | Value |
|---|---|
| Rated airflow (m³/h) | 300 |
| Available static pressure (Pa) | 85 |
| Fan power (kW) | 0.11 |
Reactivation Air
| Specification | Value |
|---|---|
| Rated airflow (m³/h) | 60 |
| Fan power (kW) *1 | - |
| *1 Shared motor for process and regeneration fans. | |
Reactivation Air Heater
| Specification | Value |
|---|---|
| Reactivation heater power (kW) | 1.95 |
| Temperature increase (°C) | 95 |
Condenser Air
| Specification | Value |
|---|---|
| Rated airflow (m³/h) | 400 |
| Available static pressure (Pa) | - |
| Fan motor power (kW) | 0.210 |
| Sensible heat, condenser air (kW) at +20°C 50% RH | 1.6 |
| Heater power (kW) | 0.175 |
Miscellaneous Data
| Data Point | Value |
|---|---|
| Operating temperature (°C) | 0/+25 |
| Max. noise level, all ducts connected (dbA) | 70 |
| Air filter standard | EU3 |
| IEC protective class (unit) | IP44 |
| IEC protective class (electrical panel) | IP54 |
| Drive motor power (W) | 2 |
| High temperature cut - out (°C) | 160±5 |
Total Power
| Unit | Power (kW) |
|---|---|
| MCS300 | 2.1 |
| C300 | 0.4 |
| *2 Separate connection for the two units. | |
Options
- Electromechanical humidistat
- Humidistat connection Kit
