Wireless Charging Alarm Clock with Nightlight
Getting Started
Step 1: Plug In
- Plug the included USB-C power cable into the input jack on the back of the clock.
- Plug the other end of this cable into the included power adapter.
- Plug the power adapter into a working power outlet.
Battery Backup
Your clock has a pre-installed battery backup that will keep the time in case power is interrupted (e.g., by a power outage). This battery is not user replaceable.
Step 2: Set the Time
Note: By default, the clock uses the 12-hour format. To switch between 12- and 24-hour time formats (e.g., 5:00 PM in 12-hour format would be 17:00 in 24-hour format), double press the M button on the right side of the clock.
- Press the M button on the right side of the clock.
- Use the + and — buttons on the right side of the clock to adjust the minutes. Press the M button to set the minutes and move to the hour.
- Use the + and — buttons to adjust the hour. Then press M to finish setting the time.
Everyday Use
Setting the Alarm
To set the alarm: Press and hold the M button on the right side of the clock until the minutes digits start blinking. Use the + and — buttons to adjust the minutes, then press M to set. Use the + and — buttons to adjust the hour, then press M to set.
To turn the alarm on: Press and hold the + button on the right side of the clock. The alarm indicator [alarm-on-indicator] appears in the display when the alarm is on.
To turn the alarm off: Press and hold the — button on the right side of the clock. The alarm indicator disappears from the display.
Notes: The alarm sounds for 3 minutes when activated. Press any button to turn off the alarm. Press anywhere else on the clock to activate snooze. The alarm indicator remains on the clock display.
Setting the Display Brightness
The clock display automatically adjusts its brightness based on the time of day: maximum brightness from 7 AM to 6:59 PM, medium brightness from 7 PM to 11:59 PM, and minimum brightness from 12 AM to 6:59 AM.
You can also adjust brightness manually. Press the + button on the right side to increase brightness (cycles through minimum, medium, max, and off). Press the — button on the right side to decrease brightness.
Note: Auto brightness settings take effect automatically. For example, if the display is set to maximum brightness, it will automatically switch to minimum brightness at midnight.
Using the Nightlight
The clock’s nightlight has four brightness settings: low, medium, high, and off. Press the nightlight button on the left side of the clock to cycle through these settings.
Charging Your Device
IMPORTANT: Before charging, ensure your device is compatible with wireless charging. If your device has a metal case, remove it before placing it on the charger.
Wireless Charging
Place your wireless charging-compatible device directly onto the charging pad on top of the clock. The charging indicator in front of the pad turns blue while charging and turns off when charging is complete. Check your device's screen for charging progress. You can remove your device at any time.
Important: If the charging indicator light starts blinking, there may be interference. Ensure no objects are between your device and the charging pad. You might need to remove your device's case.
Note: The clock must be plugged in to provide wireless charging.
Wired Charging
This clock also offers a USB port for charging. Plug the charging cable that came with your device into this port to charge.
Tour of the Wireless Charging Alarm Clock
The nightlight provides three levels of ambient lighting (low, medium, high, and off), controlled by the nightlight button on the left side.
The wireless charging pad on top allows charging compatible devices when the clock is powered by AC. The indicator turns solid blue when charging and turns off when complete. A blinking indicator signifies a charging problem.
Right Side Controls
M button: Enters time set mode (press) and alarm set mode (press and hold when alarm is on).
+ button: Increases display brightness (press). Turns on the alarm (press and hold). Increases the flashing value when setting time or alarm.
— button: Decreases display brightness (press). Turns off the alarm (press and hold). Decreases the flashing value when setting time or alarm.
Left Side Controls
Nightlight button: Cycles through nightlight brightness settings (low, medium, high, and off).
USB charging port: Provides wired charging for your USB devices.
Back Panel
The input jack on the back connects to the provided charging cable to power the clock.
Display Elements
AM/PM indicator: Shows AM or PM (not applicable in 24-hour format).
Time/date digits: Show the current time or time/alarm setting values.
Alarm indicator [alarm-on-indicator]: Shows that an alarm is set.
