File Info : application/pdf, 62 Pages, 14.56MB

32C110U1 40E210U1 55G310U1 OM

Owner's Manual
Integrated High Definition LCD Television
HIGH-DEFINITION TELEVISION
32C110U1 40E210U1 55G310U1

Foran overview of steps for setting up yournewTV, see page10.
Note: To display a High Definition picture, the TV must be receiving a High Definition signal (such as an over-the-air High Definition TV broadcast, a High Definition digital cable program, or a High Definition digital satellite program). For details, please contact your TV antenna installer, cable provider, or satellite provider.
© 2011 TOSHIBA CORPORATION All Rights Reserved

Owner's Record The model number and serial number are on the back of your TV. Record these numbers in the spaces below. Refer to these numbers whenever you communicate with your Toshiba dealer about this TV.
Model number:
Serial number:

Dear Customer,
Thank you for purchasing this Toshiba LCD TV. This manual will help you use the many exciting features of your new LCD TV. Before operating your LCD TV, please read this manual completely, and keep it nearby for future reference.
Safety Precautions
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
WARNING
RISK OF ELECTRIC SHOCK DO NOT OPEN.
WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
WARNING
To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the installation instructions. See item 25 on page 4.
WARNING: If you decide to wall mount this
television, always use a UL Listed wall bracket appropriate for the size and weight of this television. The use of any wall bracket other than a UL Listed wall bracket appropriate for the size and weight of this television for wall mounting this television could result in serious bodily injury and/or property damage. See "Removing the Pedestal Stand" ( page 6).
NOTE TO CATV INSTALLERS
This is a reminder to call the CATV system installer's attention to Article 820-40 of the U.S. NEC, which provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical. For additional antenna grounding information, see items 32 and 33 on page 4.

CHILD SAFETY:
It Makes A Difference How and Where You Use Your Flat Panel Display
Congratulations on your purchase! As you enjoy your new product, please keep these safety tips in mind:
The Issue
· The home theater entertainment experience is a growing trend and larger flat panel displays are popular purchases. However, flat panel displays are not always supported on the proper stands or installed according to the manufacturer's recommendations. · Flat panel displays that are inappropriately situated on dressers, bookcases, shelves, desks, speakers, chests, or carts may fall over and cause injury.
TOSHIBA Cares!
· The consumer electronics industry is committed to making home entertainment enjoyable and safe.
Tune Into Safety
· One size does NOT fit all. Follow the manufacturer's recommendations for the safe installation and use of your flat panel display.
· Carefully read and understand all enclosed instructions for proper use of this product.
· Don't allow children to climb on or play with furniture and television sets.
· Don't place flat panel displays on furniture that can easily be used as steps, such as a chest of drawers.
· Remember that children can become excited while watching a program, especially on a "larger than life" flat panel display. Care should be taken to place or install the display where it cannot be pushed, pulled over, or knocked down.
· Care should be taken to route all cords and cables connected to the flat panel display so that they cannot be pulled or grabbed by curious children.
Wall Mounting: If you decide to wall mount your flat panel display, always:
· Use a mount that has been recommended by the display manufacturer and/or listed by an independent laboratory (such as UL, CSA, ETL).
· Follow all instructions supplied by the display and wall mount manufacturers.
· If you have any doubts about your ability to safely install your flat panel display, contact your retailer about professional installation.
· Make sure that the wall where you are mounting the display is appropriate. Some wall mounts are not designed to be mounted to walls with steel studs or old cinder block construction. If you are unsure, contact a professional installer.
· A minimum of two people are required for installation. Flat panel displays can be heavy.

Important Safety Instructions
1) Read these instructions.
2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
9) Do not defeat the safety purpose of the polarized or grounding type plug. A polarized Wide blade plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10) Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
11) Only use attachments/accessories specified by the manufacturer.
12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tipover.
13) Unplug this apparatus during lightning storms or when unused for long periods of time.
14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
Additional Safety Precautions
14a) CAUTION: If the TV is dropped and the cabinet or enclosure surface has been damaged or the TV does not operate normally, take the following precautions: · ALWAYS turn off the TV and unplug the power cord to avoid possible electric shock or fire.

· NEVER allow your body to come in contact with any broken glass or liquid from the damaged television. The LCD panel inside the TV contains glass and a toxic liquid. If the liquid comes in contact with your mouth or eyes, or your skin is cut by broken glass, rinse the affected area thoroughly with water and consult your doctor.
· ALWAYS contact a service technician to inspect the TV any time it has been damaged or dropped.
15) CAUTION: · To reduce the risk of electric shock, do not use the polarized plug with an extension cord, receptacle, or other outlet unless the blades can be inserted completely to prevent blade exposure.
· To prevent electric shock, match wide blade of plug to wide slot; fully insert.
16) CAUTION: Do not let children swallow the product or play with the plastic bag. Keep the product and the plastic bag out of the reach of children.
17) CAUTION: Do not let water or other liquids come into contact with the product, as it may result in damage.
18) WARNING: · To prevent the spread of fire, keep candles or other open flames away from this product at all times.
· Keep the product away from direct sunlight, fire or a heat source such as a heater. This may reduce the product lifetime or result in fire.

Installation, Care, and Service

Installation
Follow these recommendations and precautions and heed all warnings when installing your TV:

19)

WARNING: NEVER expose batteries

to excessive heat such as sunshine,

fire, or the like.

20) ALWAYS plug the product into an outlet that is located in such a manner that it can be easily unplugged in case the product requires service.
21) NEVER route the product's power cord inside a wall or similar enclosed area.
22) Never modify this equipment. Changes or modifications may void: a) the warranty, and b) the user's authority to operate this equipment under the rules of the Federal Communications Commission.

23)

DANGER: RISK OF SERIOUS PERSONAL

INJURY, DEATH, OR

EQUIPMENT DAMAGE!

Never place the TV on an unstable

cart, stand, or table. The TV may fall,

causing serious personal injury,

death, or serious damage to the TV.

(continued)

24) To avoid damage to this product, never place or store the TV in direct sunlight; hot, humid areas; or areas subject to excessive dust or vibration.

25) Always place the TV on the floor or a sturdy, level, stable surface that can support the weight of the unit. To secure the TV, use a sturdy strap from the hook(s) on the rear of the TV to a wall stud, pillar, or other immovable structure. Make sure the strap is tight, secure, and parallel to the floor.

Sturdy strap (as short as possible)

min.

Hook

TV side

TV top

26) The apparatus should not be exposed to dripping or splashing. Objects filled with liquids should not be placed on the apparatus.

27) Never block or cover the slots or openings in the TV cabinet back, bottom, and sides. Never place the TV:

· on a bed, sofa, rug, or similar surface;
· too close to drapes, curtains, or walls; or
· in a confined space such as a bookcase, built-in cabinet, or any other place with poor ventilation.
28) Always leave a space of at least 4 (four) inches around the TV. The slots and openings are provided to protect the TV from overheating and to help maintain reliable operation of the TV.

29) Never allow anything to rest on or roll over the power cord, and never place the TV where the power cord is subject to wear or abuse.

30) Never overload wall outlets and extension cords.

31) Always operate this equipment from a 120 VAC, 60 Hz power source only.
32) Always make sure the antenna system is properly grounded to provide adequate protection against voltage surges and built-up static charges (see Section 810 of the National Electric Code).
Antenna lead-in wire

Ground clamp

Antenna discharge unit (NEC Section 810-20)

Electric service equipment
Ground clamps

Grounding conductors (NEC Section 810-21)
Power service grounding electrode system (NEC Art 250 Part-H)

33)

DANGER: RISK OF SERIOUS

PERSONAL INJURY OR DEATH!

· Use extreme care to make sure you are never in a position where your body (or any item you are in contact with, such as a ladder or screwdriver) can accidentally touch overhead power lines. Never locate the antenna near overhead power lines or other electrical circuits.
· Never attempt to install any of the following during lightning activity: a) an antenna system; or b) cables, wires, or any home theater component connected to an antenna or phone system.

Care
For better performance and safer operation of your TOSHIBA TV, follow these recommendations and precautions:
34) If you use the TV in a room whose temperature is 32 °F (0 °C) or below, the picture brightness may vary until the LCD warms up. This is not a sign of malfunction.
35) Always unplug the TV before cleaning. Gently wipe the display panel surface (the TV screen) using a dry, soft cloth (cotton, flannel, etc.). A hard cloth may damage the surface of the panel. Avoid contact with alcohol, thinner, benzene, acidic or alkaline solvent cleaners, abrasive cleaners, or chemical cloths, which may damage the surface. Never spray volatile compounds such as insecticide on the cabinet. Such products may damage or discolor the cabinet.
36) WARNING:
RISK OF ELECTRIC SHOCK!
Never spill liquids or push objects of any kind into the TV cabinet slots.
37) While it is thundering, do not touch the connecting cables or apparatus.
38) For added protection of your TV from lightning and power surges, always unplug the power cord and disconnect the antenna from the TV if you leave the TV unattended or unused for long periods of time.
39) ALWAYS unplug the TV to completely disconnect from mains power. When the TV is turned off using the on/off switch, it is not completely disconnected from power and a minute amount of current is still consumed.

40) During normal use, the TV may make occasional snapping or popping sounds. This is normal, especially when the unit is being turned on or off. If these sounds become frequent or continuous, unplug the power cord and contact a Toshiba Authorized Service Provider.

41)

DANGER: RISK OF SERIOUS

PERSONAL INJURY OR DEATH!

Never strike the screen with a sharp or heavy object.
42) · The LCD screen of this product can be damaged by ultraviolet radiation from the sun. When selecting a location for the television, avoid locations where the screen may be exposed to direct sunlight, such as in front of a window.
· Never touch, press, or place anything on the LCD screen. These actions will damage the LCD screen. If you need to clean the LCD screen, follow the instructions in item 35 on page 4.
Service

43)

WARNING:

RISK OF ELECTRIC SHOCK!

Never attempt to service the TV yourself. Opening and removing the covers may expose you to dangerous voltage or other hazards. Failure to follow this WARNING may result in death or serious injury. Refer all servicing not specified in this manual to a Toshiba Authorized Service Provider.

44) If you have the TV serviced: · Ask the service technician to use only replacement parts specified by the manufacturer. · Upon completion of service, ask the service technician to perform routine safety checks to determine that the TV is in safe operating condition.

45) The cold cathode fluorescent lamp in the LCD panel contains a small amount of mercury.
When the TV reaches the end of its useful life, dispose of the used TV by the approved method for your area, or ask a qualified service technician to properly dispose of the TV.
Note: The lamp(s) inside this product contain mercury. Disposal may be regulated due to environmental considerations. For disposal or recycling information, contact your local authorities or the Electronics Industries Alliance (www.eiae.org).

Choosing a location for your LCD TV
To Display your LCD TV on the included Pedestal Stand: Observe the following safety precautions:
1) Read and Follow the pedestal assembly instructions included with the pedestal. CAUTION: Before beginning pedestal assembly, carefully lay the front of the LCD Panel face down on a flat, cushioned surface such as a quilt or blanket. Leave the bottom of the unit protruding over the edge of the surface and assemble the pedestal as indicated below. Note: Extreme care should always be used when attaching the pedestal stand to avoid damage to the LCD panel.
2) Place the TV on a sturdy, level surface that can support the weight of the TV.
3) Be sure to secure the TV to a wall, pillar, surface, or other immovable structure ( item 25, page 4).
To Display your LCD TV using a Wall Bracket:
If you decide to wall mount your LCD TV, always use a UL listed wall bracket appropriate for the size and weight of the LCD TV ( page 2): 1) CAUTION: Two people are required for installation. 2) Unplug and remove any cables and/or other
component connectors from the rear of the TV. 3) Remove the screws of the VESA Mounting Pattern
show in the next page. 4) Always use the screws supplied or recommended
by the wall mount manufacturer. 5) Follow the instructions provided with your wall
bracket. Before proceeding, make sure the appropriate bracket(s) are attached to the wall and the back of the TV as described in the instructions provided with the wall bracket. 6) After attaching the appropriate bracket(s) to the wall and the back of the TV, remove the pedestal stand from the TV as described on page 6.
5

7) VESA Mounting Pattern

TV Size Hole Pattern(HxV)

32"

200x200 mm

40"

200x200 mm

55"

400x200 mm

Screw Size M6 M6 M8
(unit in mm)

Removing the Pedestal Stand
1) Carefully lay the front of the unit face down on a flat, cushioned surface such as a quilt or blanket. Leave the stand protruding over the edge of the surface.
Note: Extreme care should always be used when removing the pedestal stand to avoid damage to the LCD panel.
2) Remove the four screws shown in the below diagram. This will allow removal of the pedestal stand.
3) Once you have removed all four screws holding the pedestal stand in place, remove the pedestal stand from the TV.

32" TV

VESA Mounting Pattern

40" TV

VESA Mounting Pattern

Four screws

Hook
Sturdy strap (as short as possible)

55" TV

VESA Mounting Pattern

Four screws

Hook
Sturdy strap (as short as possible)

Four screws

Hook
Sturdy strap (as short as possible)

CAUTION: Always place the TV on the floor or a sturdy, level, stable surface that can support the weight of the unit. To secure the TV, use a sturdy strap from the hook(s) on the rear of the TV to a wall stud, pillar, or other immovable structure. Make sure the strap is tight, secure, and parallel to the floor.

FCC Declaration of Conformity Compliance Statement (Part 15):
Toshiba 32C110U1, 40E210U1 and 55G310U1 Television models comply with Part 15 of the FCC rules.
Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
The party responsible for compliance to these rules is: Toshiba America Information Systems, Inc. 9740 Irvine Blvd.; Irvine CA 92618 Ph: 1-800-631-3811
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by removing and applying power to the equipment, the user is encouraged to try to correct the interference by one or more of the following measures:
· Reorient or relocate the receiving antenna. · Increase the separation between the equipment and
the receiver. · Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected. · Consult the dealer or an experienced radio/TV
technician for help.
Caution: Changes or modifications to this equipment not expressly approved by Toshiba could void the user's authority to operate this equipment.

Important notes about your LCD TV
The following symptoms are technical limitations of LCD Display technology and are not an indication of malfunction; therefore, Toshiba is not responsible for perceived issues resulting from these symptoms.
1) An afterimage (ghost) may appear on the screen if a fixed, nonmoving image is displayed for a long period of time. The afterimage is not permanent and will disappear in a short period of time.
2) The LCD panel contained in this TV is manufactured using an extremely high level of precision technology; however, there may be an occasional pixel (dot of light) that does not operate properly (does not light, remains constantly lit, etc.). This is a structural property of LCD technology, is not a sign of malfunction, and is not covered under your warranty. Such pixels are not visible when the picture is viewed from a normal viewing distance.
Note: Interactive video games that involve shooting a "gun" type of joystick at an onscreen target may not work with this TV.
Trademark Information
· Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.
· HDMI, the HDMI logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.
· MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS and Thomson.
· This production contains Bitstream Vera Sans fonts under the following copyright. Copyright © 2003 by Bitstream, Inc. All Rights Reserved. Bitstream Vera is a trademark of Bitstream, Inc.

Contents
Important Safety Instructions................................ 3 Installation, Care, and Service.............................. 3 Chapter 1: Introduction....................................... 9
Features of your new TV...................................................... 9 Overview of steps for installing, setting up, and using
your new TV................................................................ 10 TV front and side panel controls and connections............. 11 TV back panel connections................................................. 12 Chapter 2: Connecting your TV.............................13 Overview of cable types...................................................... 13 About the connection illustrations...................................... 13 Connecting a VCR, Antenna, Cable TV, or Camcorder..... 14 Connecting a DVD player with ColorStream®
(component video), a VCR, and a satellite receiver.................................................. 15 Connecting an HDMI® or DVI device to the HDMI input.............................................................................. 16 REGZA-LINK® connection................................................ 17 Connecting a digital audio system...................................... 18 Connecting a personal computer (PC)................................ 18 Chapter 3: Using the remote control.......................20 Installing the remote control batteries................................ 20 Remote control effective range........................................... 20 Learning about the remote control..................................... 21 Chapter 4: Menu layout and navigation...................22 Main menu layout............................................................... 22 Setup/Installation menu layout........................................... 23 Navigating the menu system............................................... 23 Chapter 5: Setting up your TV...............................24 Initial Setup......................................................................... 24 Selecting the menu language.............................................. 24 Configuring the antenna input source for the ANT/CABLE terminal................................................ 24 Programming channels into the TV's channel memory..... 25 Programming channels automatically................................ 25 Setting channel skip............................................................ 25 Setting the HDMI® audio mode.......................................... 26 Viewing the digital signal meter......................................... 27 Setting the time zone........................................................... 27 Viewing the system status................................................... 27 Reset Factory Defaults........................................................ 27 Chapter 6: Using the TV's features.........................28 Selecting the video input source to view............................ 28 Labeling the video input sources........................................ 28 Tuning channels.................................................................. 29 Tuning channels using the Channel BrowserTM................... 29 Favorites Browser............................................................... 29 Elements of the Channel BrowserTM.................................... 30 Adding and clearing channels and inputs in the History
List......................................................................... 30 Setting the Channel Tuning Mode...................................... 31 Tuning to the next programmed channel............................ 31 Tuning to a specific channel
(programmed or unprogrammed)......................... 31 Switching between two channels using Channel Return... 31 Switching between two channels using SurfLockTM........... 32 Selecting the picture size.................................................... 32 Scrolling the TheaterWide® picture
(TheaterWide 2 and 3 only)......................................... 34 Using the auto aspect ratio feature..................................... 34 Using the FREEZE feature................................................. 34 Adjusting the picture........................................................... 34 Selecting the picture mode.................................................. 34 Adjusting the picture quality.............................................. 35 Using the closed caption mode........................................... 35 Base closed captions........................................................... 35
8

Digital CC Settings ............................................................ 36 CC Selector......................................................................... 36 Adjusting the audio............................................................. 37 Muting the sound................................................................ 37 Using the digital audio selector.......................................... 37 Selecting stereo/SAP broadcasts........................................ 37 Adjusting the audio quality................................................. 37 Selecting the optical audio output format........................... 38 Using the Dolby® Digital Dynamic Range Control
feature.................................................................... 38 Using the Locks menu........................................................ 38 Entering the PIN code......................................................... 38 If you cannot remember your PIN code............................. 38 Changing your PIN code.................................................... 39 Blocking TV programs and movies by rating (V-Chip)..... 39 Downloading an additional rating system for blocking
TV programs and movies...................................... 39 Blocking TV programs by Canada rating.......................... 40 Unlocking programs temporarily....................................... 41 Using the input lock feature................................................ 41 Locking channels................................................................ 41 Using the GameTimer®....................................................... 41 Using the panel lock feature............................................... 42 Using the PC settings feature.............................................. 42 Setting the PC Audio........................................................... 43 Using the Media Player...................................................... 43 Using the Media Player with USB..................................... 43 To select the Auto Start function........................................ 43 To open the Media Player .................................................. 43 Viewing photo files............................................................. 44 Single View......................................................................... 44 Slideshow............................................................................ 44 Playing music files.............................................................. 44 During playback.................................................................. 45 Viewing photo files and playing music files
at the same time..................................................... 45 Setting the sleep timer......................................................... 46 Automatic Power Down...................................................... 46 No Signal Power Down...................................................... 46 Using REGZA-LINK®........................................................ 47 REGZA-LINK® playback device (DVD player, etc.)
control ................................................................... 47 REGZA-LINK® input source selection.............................. 47 VOLUME and MUTE controls of Audio Receiver........... 48 Other REGZA-LINK® functions........................................ 48 Displaying TV status information...................................... 48 Understanding the last mode memory feature................... 49 Chapter 7: Using the TV's advanced features............50
Using the advanced picture settings features..................... 50 Using Dynamic Contrast..................................................... 50 Using the static gamma feature.......................................... 50 Selecting the color temperature.......................................... 50 Selecting the cinema mode................................................. 51 Using the ClearFrameTM feature (only for G310U1)........... 51 Using the Film Stabilization feature (only for G310U1)... 51 Using CableClear® digital noise reduction......................... 51 Using MPEG noise reduction............................................. 52 Using the Game Mode feature............................................ 52 Chapter 8: Troubleshooting.................................53
General troubleshooting...................................................... 53 Chapter 9: Appendix..........................................55
Specifications...................................................................... 55 Acceptable signal formats for PC IN and HDMI
terminals....................................................................... 56 Limited United States Warranty for LCD Televisions....... 57 Limited Canadian Warranty for Toshiba Brand Flat
Panel Televisions.......................................................... 58

Chapter 1: Introduction
Features of your new TV
The following are just a few of the many exciting features of your new Toshiba widescreen, integrated HD, LCD TV: · Integrated digital tuning (8VSB ATSC and
QAM) eliminates the need for a separate digital converter set-top box (in most cases). · 1366 x 768 output resolution (C110U1). · 1920 x 1080 output resolution (E210U1, G310U1). · HDMI® digital, high-definition multimedia interfaces 1080p input support ( page 16). · One set of ColorStream® HD high-resolution component video inputs ( page 15). · Digital Audio Out optical audio connection with Dolby® Digital optical output format ( page 38). · CableClear® digital picture noise reduction ( page 51). · PC IN (Analog RGB) computer terminal ( pages 18-19). · REGZA-LINK® allows control of external devices from the TV remote via HDMI connection( page 47). · ClearFrameTM ClearFrame 120 Hz anti-blur feature(Only for G310U1) ( page 51). · Media Player allows you to view your JPEG files and listen to MP3 music ( page 43).
9

Chapter 1: Introduction

Overview of steps for installing, setting up, and using your new TV
Follow these steps to set up your TV and begin using its many exciting features.
1 Carefully read the important safety, installation,
care, and service information. Keep this manual for future reference.
2 Observe the following when choosing a location
for the TV:
· Read "Important notes about your LCD TV" ( page 7).
· Place the TV on the floor or a sturdy, level, stable surface that can support the weight of the unit. Secure the TV to a wall, pillar, or other immovable structure ( page 4).
· Place the TV in a location where light does not reflect on the screen.
· Place the TV far enough from walls and other objects to allow proper ventilation. Inadequate ventilation may cause overheating, which will damage the TV. THIS TYPE OF DAMAGE IS NOT COVERED UNDER THE TOSHIBA WARRANTY.
3 Do not plug in any power cords until AFTER you
have connected all cables and devices to your TV.
4 BEFORE connecting cables or devices to the TV,
learn the functions of the TV's connections and controls ( pages 1112).
5 Connect your other electronic device(s) to the TV
( pages 1319).
6 Install the batteries in the remote control ( page
20).
7 See "Learning about the remote control" ( page
21) for an overview of the buttons on the remote control.
8 AFTER connecting all cables and devices, plug
in the power cords for your TV and other devices. Then press POWER on the TV control panel or remote control to turn on the TV. If the TV stops responding to the remote control or TV control panel and you cannot turn the TV off or on, please unplug the power cord a few seconds then plug it back in and try again.
9 See "Menu layout and navigation" for a quick
overview of navigating the TV's menu system ( page 22).

10 Program channels into the TV's channel memory
( page 25).
11 For details on using the TV's features, see
Chapters 6 and 7.
12 For help, refer to Chapter 8: Troubleshooting. 13 For technical specifications and warranty
information, see Chapter 9.
14 Enjoy your new TV!

Chapter 1: Introduction

TV front and side panel controls and connections

Models C110U1, E210U1 and G310U1 are used in this manual for illustration purposes.

Left side panel

TV front

7
4 8

TV top

10
55G310U1 Control panel

32C110U1/40E210U1 Control panel

1 Green LED Power LED (Green) = Power indicator
2 Remote sensor (embedded) -- Point the remote control toward this remote sensor ( "Remote control effective range" on page 20).
3 POWER -- Press to turn the TV on and off. If the TV stops responding to the controls on the remote control or TV control panel and you cannot turn off the TV, please unplug the power cord few seconds then re-plug to try again.
4 ARROWS pqtu -- When a menu is onscreen, these buttons function as up/down/left/ right menu navigation buttons.
5 MENU (ENTER) -- Press to access the menu system ( pages 2223). When a menu is onscreen, the MENU button on the TV's control panel can function as the ENTER button.
6 EXIT -- Press to instantly close an on-screen menu.
7 CHANNEL pq -- When no menu is on-screen, these buttons change the channel (programmed channels only; page 25).

8 VOLUME tu -- When no menu is on-screen. These buttons adjust the volume level.
9 INPUT -- Repeatedly press to change the video source you are viewing.
10 HDMI® IN (G310U1 only) -- High-Definition Multimedia Interface input receives digital audio and uncompressed digital video from an HDMI device or uncompressed digital video from a DVI device. HDMI connection is necessary to receive 1080p signals.
11 USB port -- To access JPEG or MP3 files.

Chapter 1: Introduction
TV back panel connections
For an explanation of cable types and connections, see pages 1319.

TV back

Power Cord

2
1
3 4
76 5

1 PC IN -- For use when connecting a personal computer.
2 HDMI® IN -- High-Definition Multimedia Interface input receives digital audio and uncompressed digital video from an HDMI device or uncompressed digital video from a DVI device. HDMI connection is necessary to receive 1080p signals.
3 PC/HDMI 1 (AUDIO) IN -- PC audio input terminal is shared with HDMI 1 analog audio input terminals, and its use can be configured in the Audio Setup menu ( page 43).
4 ANT/CABLE -- Input that supports analog (NTSC) and digital (ATSC) off-air antenna signals and analog and digital Cable TV (QAM) signals.
5 DIGITAL AUDIO OUT -- Optical audio output in Dolby Digital or PCM (Pulse-Code Modulation) format for connecting an external Dolby Digital decoder, amplifier, or home theater system with optical audio input.

6 VIDEO IN -- Standard (composite) video and standard audio inputs for connecting devices with composite video.
Note: Standard (composite) video cable carry only video information; separate audio cables are required for a complete connection.
7 ColorStream® HD -- ColorStream® highdefinition component video input (with standard stereo audio inputs) for connecting devices with component video output, such as a Toshiba DVD player with ColorStream®.
Note: Component video cables carry only video information; separate audio cables are required for a complete connection.

Chapter 2: Connecting your TV

Overview of cable types
Cables can be purchased from most stores that sell audio/ video devices. Before purchasing any cables, be sure of connector types required by your devices and the length of each cable.
Coaxial (F-type) cable
Coaxial (F-type) cable is used for connecting your antenna, cable TV service, and/or cable converter box to the ANT/CABLE input on your TV.
Standard A/V cables (red/white/yellow)

Standard A/V cables (composite video) usually come in sets of three, and are for use with video devices with analog audio and composite video output. These cables (and the related inputs on your TV) are typically colorcoded according to use: yellow for video, red for stereo right audio, and white for stereo left (or mono) audio.
Component video cables (red/green/blue)

Component video cables come in sets of three and are for use with video devices with component video output. (ColorStream® is Toshiba's brand of component video.) These cables are typically color-coded red, green, and blue. Separate audio cables are required for a complete connection.
Note: Component video cables provide better picture performance than a standard (composite) video.

HDMI® cable

(with HDMI Logo "

Optical audio cable
Optical audio cable is for connecting receivers with Dolby Digital or PCM (pulse-code modulation) optical audio input to the TV's DIGITAL AUDIO OUT terminal ( page 18).
Analog RGB (15-pin) computer cable
Analog RGB (15-pin) computer cable is for connecting a PC to the TV's PC IN terminal ( page 18). Note: Separate audio cables are required for a complete connection.
3.5mm Stereo to RCA Y-cable
3.5mm Stereo to RCA Y-Cable is for connecting audio signals from a DVI device to the TV.
About the connection illustrations
You can connect different types and brands of devices to your TV in several different configurations. The connection illustrations in this manual are representative of typical device connections only. The input/output terminals on your devices may differ from those illustrated herein. For details on connecting and using your specific devices, refer to each device's owner's manual.

HDMI (High-Definition Multimedia Interface) cable is for use with devices with an HDMI output. An HDMI cable delivers digital audio and video in its native format. This cable carries both video and audio information; therefore, separate audio cables are not required for a complete HDMI device connection ( page 16 and page 19).
Note: HDMI cable provides better picture performance than a standard (composite) video.
13

Chapter 2: Connecting your TV

Connecting a VCR, Antenna, Cable TV, or Camcorder

Camcorder

AUDIO OUT
L
R

VIDEO

TV back panel

From Cable TV or From Cable TV

antenna

Cable box

IN CH 3 CH 4

OUT

Stereo VCR

VIDEO

AUDIO

IN CH 3 CH 4
OUT

IN from ANT
OUT to TV

You will need:
· Coaxial cables · Standard A/V cables
-- If you have a mono VCR, connect L/MONO on the TV to your VCR's audio out terminal using the white audio cable only.
· Standard audio cables.
Note: When you use a Cable box, you may not be able to use the remote control to program or access certain features on the TV.
To view the antenna or Cable signal: Select the ANT/CABLE video input source on the TV.*
To view basic and premium Cable channels: Turn OFF the VCR. Select the ANT/CABLE video input source on the TV.* Tune the TV to channel 3 or 4 (whichever channel the Cable box output is set to). Use the Cable box controls to change channels.

To view the VCR: Turn ON the VCR. Select the VIDEO video input source on the TV.*
To view the camcorder video: Select the VIDEO video input source on the TV.*

** To select the video input source, press remote control ( page 21).

on the

The unauthorized recording, use, distribution, or revision of television programs, videotapes, DVDs, and other materials is prohibited under the Copyright Laws of the United States and other countries, and may subject you to civil and criminal liability.

Chapter 2: Connecting your TV

Connecting a DVD player with ColorStream® (component video), a VCR, and a satellite receiver

From satellite dish

TV back panel
1

From antenna

Stereo VCR

VIDEO

AUDIO

IN CH 3 CH 4
OUT

IN from ANT OUT to TV

Satellite IN

COMPONENT VIDEO S-VIDEO VIDEO OUT OUT

AUDIO OUT L
R

Satellite receiver with component video or DVD player with component video

You will need:
· Coaxial cables · Standard A/V cables
-- If you have a mono VCR, connect L/MONO on the TV to your VCR's audio out terminal using the white audio cable only.
· Standard audio cables · Component video cables
-- You can connect the component video cables (plus audio cables) from the DVD player or satellite receiver to the ColorStream HD terminal on the TV. The ColorStream HD terminal can be used with Progressive (480p, 720p) and Interlaced (480i, 1080i) scan systems. A 1080i signal will provide the best picture performance (1080p is not supported).
-- If your DVD player or satellite receiver does not have component video, connect a standard A/V cable to VIDEO terminal. If your DVD player has HDMI video, see page 16.

To view antenna or Cable channels: Select the ANT/CABLE video input source on the TV.*
To view the DVD player: Turn ON the DVD player. Select the ColorStream HD video input source on the TV.*
To view satellite programs using the component video connections: Turn on the satellite receiver. Select the ColorStream HD video input source on the TV.*
To view the VCR or view and record antenna channels: Turn ON the VCR. Tune the VCR to the channel you want to watch. Select the VIDEO video input source on the TV.*
To record a TV program while watching a DVD: Turn ON the VCR. Tune the VCR to the channel to record. Select the ColorStream HD video input source on the TV* to view the DVD.

** To select the video input source, press remote control ( page 21).

on the

Chapter 2: Connecting your TV

Connecting an HDMI® or DVI device to the HDMI input

The HDMI input on your TV receives digital audio and uncompressed digital video from an HDMI source device, or uncompressed digital video from a DVI (Digital Visual Interface) source device. This input is designed to accept HDCP (HighBandwidth Digital-Content Protection) program material in digital form from EIA/CEA-861-Dcompliant[1] consumer electronic devices (such as a set-top box or DVD player with HDMI or DVI output).The HDMI input can accept and display VGA, SVGA, XGA, WXGA, SXGA, 480i (60Hz), 480p (60Hz), 720p (60Hz), 1080i (60Hz) and 1080p (24Hz/60Hz) signal formats. For detailed signal specifications, see page 56. Supported Audio format: Linear PCM, sampling rate 32/44.1/ 48 kHz
Note: To connect a PC to the HDMI input, see page 19.

To connect an HDMI device, you will need:

· One HDMI cable (type A connector) per HDMI device -- For proper operation, it is recommended that you use an HDMI cable with the HDMI Logo

(

-- To display a 1080p/60Hz signal format, you will need a Category 2 cable. Conventional

HDMI/DVI cable may not work properly.

-- HDMI cable transfers both video and audio. Separate analog audio cables are not

required (see illustration).

-- See "Setting the HDMI ® audio mode" ( page 26).

TV back panel Side panel

Only for G310U1

HDMI device

To view the HDMI device video: Select the HDMI 1, HDMI 2 or HDMI 3 (only for G310U1) video input source on the TV.*

** To select the video input source, press remote control ( page 21).

on the

To connect a DVI device, you will need:
· One HDMI-to-DVI adapter cable -- For proper operation, the length of an HDMIto-DVI adapter cable should not exceed 9.8 ft (3m). The recommended length is 6.6 ft (2m).
· One 3.5mm stereo to RCA Y-cable -- An HDMI-to-DVI adapter cable transfers video only. Separate analog audio cables are required (see illustration).
-- See "Setting the HDMI ® audio mode" ( page 26).
TV back panel

DVI device

VIDEO

AUDIO

IN IN

OUT

DVI / HDCP OUT

Note: To ensure that the HDMI or DVI device is reset properly, it is recommended that you follow these procedures:
·· When turning on your electronic components, turn on the TV first, and then the HDMI or DVI device.
·· When turning off your electronic components, turn off the HDMI or DVI device first, and then the TV.
[1] EIA/CEA-861-D compliance covers the transmission of uncompressed digital video with high-bandwidth digital content protection, which is being standardized for reception of high-definition video signals. Because this is an evolving technology, it is possible that some devices may not operate properly with the TV.

Chapter 2: Connecting your TV
REGZA-LINK® connection
You can control the basic functions of connected audio/video devices using the TV's remote control if you connect a REGZA-LINK® compatible audio receiver or playback device. For an explanation of setup and operations, see page 47.
TV back panel

Audio receiver

Playback device (REGZA-LINK® DVD player, etc.)

To connect an Audio Receiver and Playback Devices, you will need:
· HDMI cables ( page 13)

Note:

·· If several devices are connected, the REGZA-LINK feature may not operate
properly.

·· For proper operation, it is recommended that

you use HDMI cables with the HDMI Logo

(

Before controlling the device(s):
· After completing the above connections, set the REGZA-LINK Setup menu as you desire ( page 48).
· The connected devices must also be set. For details, see the operation manual for each device.
· The REGZA-LINK® feature uses the CEC technology as regulated by the HDMI standard.
· This feature is limited to models incorporating Toshiba's REGZA-LINK®. However, Toshiba is not liable for those operations. Refer to the individual instruction manuals for compatibility information.
Note: This feature may not work properly depending on the devices that are connected.

Chapter 2: Connecting your TV

Connecting a digital audio system

The TV's DIGITAL AUDIO OUT terminal outputs a

Dolby® * Digital

or 2-channel down-mixed

PCM (Pulse-Code Modulation) signal for use with

an external Dolby® Digital decoder or other external

audio system with optical audio input.

You will need:
· Optical audio cable (Use an optical audio cable that has the larger "TosLink" connector and not the smaller "mini-optical" connector.)
Dolby Digital decoder or other digital audio system

TV back panel
To control the audio:
1 Turn on the TV and the digital audio device. 2 Press on the TV's remote control and open the
Sound menu.
3 Highlight Audio Setup and press .

Note: ·· Some audio systems may not be compatible
with Dolby Digital bitstream signals. Older audio systems that are not compatible with standard optical out signals may not work properly, creating a high noise level that may damage speakers or headphones. THIS DAMAGE IS NOT COVERED BY YOUR WARRANTY. ·· The DIGITAL AUDIO OUT terminal may not output some digital audio sources because of copy restrictions.
** Manufactured under license from Dolby Laboratories. Dolby, and the double-D symbol are trademarks of Dolby Laboratories.
Connecting a personal computer (PC)
With either the PC IN or HDMI connection, you can watch your computer's display on the TV and hear the sound from the TV's speakers.
To connect a PC to the PC IN terminal on the TV:
When connecting a PC to the PC IN terminal on the TV, use an analog RGB (15-pin) computer cable and a PC audio cable.
TV back panel

1
Computer

PC audio cable
PC audio output

4 In the Optical Output Format field, select either
Dolby Digital or PCM, depending on your device ("Selecting the optical audio output format" on page 38).
18

Conversion adapter (if necessary)
· To use a PC, set the monitor output resolution on the PC before connecting it to the TV. The PC IN terminal can accept and display VGA, SVGA, XGA, WXGA and SXGA signal formats. For detailed signal specifications ( page 56). Other formats or non-standard signals will not be displayed correctly.
· To display the optimum picture, use the PC setting feature ( "Using the PC settings feature" on page 42).
(continued)

Chapter 2: Connecting your TV

Note:
·· The PC audio input terminals on the TV are shared with the HDMI-1 analog audio input terminals ( page 43).
·· Some PC models cannot be connected to this TV.
·· An adapter is not needed for computers with a compatible mini D-sub15-pin terminal.
·· Depending on the DVD's title and the specifications of the PC on which you are playing the DVD-Video, some scenes may be skipped or you may not be able to pause during multi-angle scenes.
· Signal names for mini D-sub 15-pin connector

Pin Signal No. name
1R

Pin Signal No. name

6 Ground 11 Reserved

7 Ground 12 SDA

8 Ground 13 H-sync

4 Reserved 9 5V

14 V-sync

5 Reserved 10 Ground 15 SCL

The HDMI input can accept and display VGA, SVGA, XGA, WXGA, SXGA, 480i (60Hz), 480p (60Hz), 720p (60Hz), 1080i (60Hz), and 1080p (24Hz/60Hz) signal formats. For detailed signal specifications, see page 56.
Note:
·· The edges of the images may be hidden. ·· If receiving a 480i (HDMI), 480p (HDMI), 720p,
1080i, or 1080p signal program, Native mode scales the video to display the entire picture within the borders of the screen (i.e. no overscanning).

To connect a PC to the HDMI terminal on the TV:
When connecting a PC with a DVI terminal to the HDMI terminal on the TV, use an HDMI-to-DVI adapter cable and analog audio cables. Such as a Toshiba PC with an HDMI terminal, use an HDMI cable (type A connector). Separate analog audio cables may not be necessary, depending on PC hardware and setup ( page 16).
TV back panel

1
Computer

PC audio cable
PC audio output

HDMI-to-DVI adapter cable
19

Chapter 3: Using the remote control

Installing the remote control batteries
1 Remove the battery cover from the back of the
remote control.

Remote control effective range
For optimum performance, aim the remote control directly at the TV and make sure there is no obstruction between the remote control and the TV.

Squeeze tab and lift cover.
2 Install two "AAA" size batteries, making sure to
match the + and signs on the batteries to the signs on the battery compartment.

Point remote control toward remote sensor on front of TV.

3 Reinsert the battery cover in the remote control
until the tab snaps.
Caution: Batteries must not be exposed to excessive heat such as direct sunlight, fire, heaters or the like.
Note:
·· Be sure to use AAA size batteries.
·· Dispose of batteries in a designated disposal area.
·· Batteries should always be disposed of with the environment in mind. Always dispose of batteries in accordance with applicable laws and regulations.
·· If the remote control does not operate correctly, or if the operating range becomes reduced, replace batteries with new ones.
·· When necessary to replace batteries in the remote control, always replace both batteries with new ones. Never mix battery types or new and used batteries.
·· Always remove batteries from the remote control if they are dead or if the remote control is not to be used for an extended period of time. This will prevent battery acid from leaking into the battery compartment.

16.4 ft (5m)

Chapter 3: Using the remote control

Learning about the remote control
Only the buttons used for operating the TV are described here.
Note: The error message "NOT AVAILABLE" may appear if you press a key for a function that is not available. 1 POWER turns the TV on and off. When the TV is
on, the green LED indicator on the TV front will be illuminated. 2 PIC SIZE cycles through the picture sizes: Full, TheaterWide 1/ 2/ 3, 4:3, Native, Normal, and Dot by Dot ( pages 32-33). 3 PIC MODE selects the picture mode ( pages 34-35). 4 INPUT selects the video input source ( page 28). 5 SLEEP accesses the sleep timer ( page 46).

6 FREEZE freezes the picture. Press again to restore the moving picture ( page 34).
7 Channel Numbers (09, /100) directly tune channels. The button is used to tune digital channels ( page 31) or to edit the Favorites List ( page 29).
8 FAV BROWSER accesses the Favorites List in the Channel BrowserTM ( page 29).
9 RECALL displays TV status information ( page 48).
10 CH pq cycles through programmed channels when no menu is on-screen ( page 25).
11 C.CAPTION accesses the closed caption ( pages 35-36).
12 MUTE reduces or turns off the sound ( page 37).
13 VOL + adjusts the volume level.
14 INFO displays TV status information as well as program details, when available ( pages 48-49).
15 EXIT closes on-screen menus.
16 ENTER activates highlighted items in the main menu system.
17 CH RTN returns to the last viewed channel or source ( page 31).
18 Arrow buttons (pqtu) When a menu is on-screen, these buttons select or adjust programming menus (Also see t / u ).
19 t / u While watching TV, these buttons open the Channel BrowserTM and tune to the previous/next channel in the channel history ( page 29). (Also see "Arrow buttons").
20 MENU accesses the main TV menu system ( pages 22-23).
The following key functions allow you to control Toshiba REGZA-LINK compatible devices via HDMI connection. ( Page 47, REGZA-LINK playback device control) 21 STOP Stops the tape or DVD.
22 PLAY Begins playback of a tape or DVD.
23 SKIP Skips forward to locate later DVD chapters.
24 FF Fast-forwards the tape or DVD. (Press during play mode to view the picture moving rapidly forward.)
25 EJECT Eject the tape or DVD.
26 PAUSE Press during play or record mode to pause the picture; press again to restart.
27 SKIP Skips back to beginning of current DVD chapter, or locates previous chapters.
28 REW Rewinds/reverses the tape or DVD. (Press during play mode to view the picture moving rapidly backward.)

Chapter 4: Menu layout and navigation

Main menu layout

The tables below and on the next page provide a quick overview of your TV's menu system. To open the main menus (illustrated below), press on the remote control or TV control panel.

Icon
Picture Sound Preferences
Locks
Setup

Item
Mode Picture Settings Noise Reduction Game Mode Theater Settings Digital Audio Selector Audio Settings Audio Setup CC Selector Base CC Mode Digital CC Settings Input Labeling Menu Language Channel Browser Setup REGZA-LINK Player Control Energy Saving Settings Enable Rating Blocking Edit Rating Limits Input Lock Panel Lock GameTimer New PIN Code Installation
REGZA-LINK Setup
Sleep Timer PC Settings Media Player

Option
Sports / Standard / Movie / PC / Preference [Opens the Picture Settings menu] [Opens the Noise Reduction menu] Off / On [Opens the Theater Settings menu] [Launches the temporary Audio Selector] [Opens the Audio Settings menu] [Opens the Audio Setup menu] [Launches the temporary CC Selector] Off / CC1 / CC2 / CC3 / CC4 / T1 / T2 / T3 / T4 [Opens the Digital CC Setup menu] [Opens the Input Labeling menu] English / Français / Español [Opens the Channel Browser Settings menu]
[Opens the REGZA-LINK Player Control]
[Opens the Energy Saving Settings menu] Off / On [Opens the Edit Rating Limits menu] Off / Video / Video+ Off / On Off / 30 min / 60 min / 90 min / 120 min [Opens the New PIN Code entry screen] [Opens the Installation menu ( page 23)] Enable REGZA-LINK / TV Auto Input Switch
/ TV Auto Power / Device Auto Standby / Speaker Preference [00:00~12:00] [Opens the PC Settings menu] [Opens the Media Player menu]

Chapter 4: Menu layout and navigation

Setup/Installation menu layout

The Installation menu contains the Terrestrial and System Status menus.

To open the Installation menu (illustrated below), press Setup menu, select Installation, and press .

on the remote control or TV control panel, open the

Icon
Terrestrial
System Status

Item
Input Configuration Channel Program Channel Options Channel Tuning Mode Time Zone Signal Meter
System Information

Option
[Opens the Input Configuration menu] [Start Scan] [Scans for new channels on ANT/CABLE] [Opens the Skip / Lock Channel menu] Standard / Auto / Digital Eastern / Newfoundland / Atlantic / Hawaii / Alaska /
Pacific / Mountain / Central [Opens the Signal Meter menu]
[Opens the System Information screen]

Navigating the menu system
You can use the buttons on the remote control or TV control panel to access and navigate your TV's onscreen menu system. · Press to open the menu system.

· To close a menu instantly, press . Note: The menu background may sometimes appear black, depending on the signal the TV is receiving. This is not a sign of malfunction.

· When a menu is opened, use the up/down/left/ right arrow buttons (pqtu) on the remote control or pq on the TV control panel to move in the corresponding direction in the menu.
· Press to save your menu settings or select a highlighted item. (A highlighted menu item appears in a different color in the menu.)
· All menus close automatically if you do not make a selection within 60 seconds, except the signal meter menu, which closes automatically after about 5 minutes.
23

Chapter 5: Setting up your TV

Initial Setup
When you first turn on or reset the TV, the Initial Setup window will appear.
1 In the Menu Language field, press t or u to
select your preferred language.
2 Press t or u to select Time Zone Setup and set
your desired time zone with t or u and press .
3 Next, the Location setting window will appear.
For normal home use, press t or u to select Home and press .
4 Next, ANT/CABLE In setup window will appear.
Press t or u to select the input source (Cable or Antenna) for the ANT/CABLE input on the TV.
5 If you select Antenna, the Channel Tuning Mode
setup window will appear. To tune only digital channels, select Digital. To tune digital channels preferentially over analog when entering channel number directly, select Auto. For normal tuning, select Standard. Press to continue to Auto Tuning.
6 Press to select Start Scan and continue with
the Auto Tuning.
You can stop the Initial Setup with . However if you do not finish the entire Initial Setup process, by pressing POWER / prior to step 5 above, the Initial Setup window will appear every time you turn on the TV.
Selecting the menu language
You can choose from three different languages (English, French, and Spanish) for the on-screen display of menus and messages.
To select the menu language:
1 Press and open the Preferences menu,
highlight Menu Language.
2 Press t or u to select your preferred menu
language.

Configuring the antenna input source for the ANT/CABLE terminal
To configure the ANT/CABLE input source:
1 Press and open the Setup menu. 2 Highlight Installation and press .
3 A new set of Installation menu icons will appear,
as shown below. Open the Terrestrial menu, highlight Input Configuration, and press .
4 Highlight ANT/CABLE In and press t or u to
select the input source (Cable or Antenna) for the ANT/CABLE input on the TV.
5 To save your new settings, highlight Done and press
. To revert to your original settings, highlight Cancel and press .

3 Press to close the Preferences menu. 24

(continued)

Chapter 5: Setting up your TV

Programming channels into the TV's channel memory
When you press or on the remote control or TV control panel, your TV will stop only on the channels you programmed into the TV's channel memory. Follow the steps below to program channels into the TV's channel memory.
Programming channels automatically
Your TV can automatically detect all active channels in your area and store them in its memory. After the channels are programmed automatically, you can manually add or erase individual channels in the channel memory.
Note:
·· You must configure the ANT/CABLE input source before programming channels ( page 24).
·· The automatic channel programming process will erase channels that were previously programmed into the TV's memory.
·· To tune the TV to a channel not programmed in the channel memory, you must use the Channel Number buttons on the remote control.
·· Programming channels when the ANT/CABLE input is configured for Cable will take substantially longer than when the antenna input is configured for Antenna. This is normal; however, once channel programming is finished, you should not have to repeat the programming process again unless your Cable TV service lineup changes significantly.
To program channels automatically:
1 Configure the antenna input source, if you have
not already done so ( page 24).
2 Press and open the Setup menu.

3 Highlight Installation and press .
4 A new set of Installation menu icons will appear,
as shown below. Open the Terrestrial menu, highlight Channel Program to bring up the Start Scan, and press again to begin channel programming.
The TV will automatically cycle through all the antenna channels and store all active channels in the channel memory. While the TV is cycling through the channels the message "Scanning channels, please wait" appears.
5 To cancel channel programming, press on
the remote control (or highlight Cancel in the onscreen display and press ). When channel programming is finished, press or to view the programmed channels.
Setting channel skip
To prevent certain channels from being viewed, channel positions can be skipped.
1 From the Setup menu, highlight Installation and
press .

(continued)
25

Chapter 5: Setting up your TV

2 Press p or q to select Channel Options and press
. The list of channels will appear.
3 Press p or q to select a channel position to be
skipped and press . A will appear in the box. To remove the , press again. To add a channel to the channel memory: Highlight the checked box next to the channel number you want to add, and then press to remove the tick.
To block channels in the channel memory: You can block specific channels. You will not be able to tune blocked channels unless you unlock them. ( Page 41 Locking channels) To manually add digital subchannels on a physical channel:
Use the Channel Numbers and the Dash ( ) on the remote control to enter the channel number (for example, 561). If the channel is found, the number will be added to the list and the box will be unchecked. If the channel is not found, a message will appear. Note: Skipped channels cannot be selected with
or ; however, they can still be accessed using the number keys on the remote control.
To remove encrypted channels from the channel memory:
If an encrypted channel is accidentally added to the channel list by programming channels, you can remove the unwanted encrypted (non-viewable) channel while you are channel surfing. When you tune to an encrypted channel, the following message will appear.
Digital Channel Is Encrypted - Press 1 on remote to remove channel

Setting the HDMI® audio mode
To set the HDMI audio mode:
1 Press and open the Sound menu. 2 Highlight Audio Setup and press . 3 Press p or q to select HDMI 1 Audio and
then press t or u to select the HDMI 1 audio mode (Auto, Digital, or Analog). (Auto is the recommended mode.) See "Connecting an HDMI or DVI device to the HDMI input" ( page 16).

Mode Description

Auto

When viewing the HDMI 1 input, if digital audio from the HDMI input is available, it will be output. If not, the TV will automatically detect and output analog audio from the PC Audio input.

Digital

When viewing the HDMI 1 input, digital audio from the HDMI input will be output.

Analog

When viewing the HDMI 1 input, analog audio from the PC Audio input will be output.

4 To save your settings, highlight Done and press
.

Note: Because the PC and HDMI-1 inputs share the same set of analog audio inputs, the PC Audio menu setting influences the HDMI 1 Audio menu setting. If PC Audio is set to "No," the HDMI 1 Audio setting changes to "Auto." If PC Audio is set to "Yes," the HDMI 1 Audio setting is set to "Digital" and is grayed out in the menu. (Also see item 2 on page 12 and "Setting the PC Audio" on page 43.)

Press while the message is on the screen to remove the unnecessary channel from the channel list.
26

Chapter 5: Setting up your TV

Viewing the digital signal meter
You can view the digital signal meter in the ANT/ CABLE digital TV input source only.
To view the digital signal meter:
1 Press and open the Setup menu. 2 Highlight Installation and press . 3 A new set of Installation menu icons will appear.
Open the Terrestrial menu, highlight Signal Meter, and press .
4 Press pqtu to select the antenna input and
digital channel whose signal you want to check. Note: · The physical digital channel number listed in
the Signal Meter screen may not correspond to a virtual TV channel number. Contact your local broadcasters to obtain the RF channel numbers for your local digital stations. · The signal strength does not change between virtual channels on the same physical channel.
To close the screen and return to the Terrestrial menu: Highlight Done and press . To return to normal viewing:
Press .
Setting the time zone
The Time Zone setup will allow you to specify the correct time zone for your region. This feature will allow the TV status information to show the correct time zone information ( page 49).
To set the time zone:
1 From the Setup menu, highlight Installation and
press . A new set of Installation menu icons will appear.
2 Highlight Time Zone, and press . 3 Press t or u to select the region, highlight Done,
and then press .
After the time zone has been set, you will be asked to set the current Daylight Saving Time status.
To set the Daylight Saving Time status:
1 Press t or u to select Yes or No, Highlight Done,
and then press .

Viewing the system status
To view the system status:
1 Press and open the Setup menu. 2 Highlight Installation and press . 3 A new set of Installation menu icons will appear.
Open the System Status menu, highlight System Information, and press .
4 Press tu to scroll through the menu bar to select
the Factory Defaults or Support Information and view the related information. To close the screen and return to the Installation menu:
Highlight Done and press . To return to normal viewing: Press .
Reset Factory Defaults
To reset all settings and channels to their factory default values:
1 Press and open the Setup menu. 2 Highlight Installation and press . A new set of
Installation menu icons will appear.
3 Open the System Status menu, highlight System
Information, and press .
4 Press tu to scroll through the menu bar to select
Factory Defaults.
5 Highlight Yes and press . 6 (If PIN code has been set, enter your PIN code. Press
t or u to select Done and press .) A warning message will appear, select Yes and press , the TV will turn off automatically after a few seconds. After the TV turns off, unplug the TV power cord and then plug it in again to complete the reset process.
To cancel the reset: Select No and press in step 5 above.
27

Chapter 6: Using the TV's features

Selecting the video input source to view

To select the video input source to view:

1 Press
panel.

on the remote control or TV control

2 And then either:

a) Press 05(for C110U1, E210U1), 0-6(only for G310U1), or
b) Repeatedly press on the remote control

and then press to change the input; or c) Repeatedly press on the remote control
or TV control panel to change the input.
The current signal source displays in the top right corner of the Input Selection screen.

3 6

(for C110U1, E210U1)

(for G310U1)

Note: ··You can label the video input sources according
to the specific devices you have connected to the TV ( "Labeling the video input sources" at right). ··Sources can be "hidden" ( "Labeling the video input sources" at right). ··"No video signal" will appear randomly on the screen if no signal is received in video input mode. ··If CEC device is connected to an HDMI input, the REGZA-LINK® icon will appear.
If a REGZA-LINK® device with HDMI switching capability (e.g. Audio Receiver) is connected to the HDMI input:
Press on the remote or TV control panel repeatedly to highlight HDMI 1, HDMI 2, or HDMI 3 (only for G310U1).
If the connected CEC device has any connected devices, a separate device selection popup window will appear.

Press repeatedly to highlight the desired input source, and then press .
Note: ··When selecting REGZA-LINK® input sources
from the popup window using , some REGZA-LINK® devices may automatically turn on. ··When selecting input sources using , you will have to press to actually select a particular device from the popup window.
Labeling the video input sources
You can label each video input source according to the type of device you connected to each source, from the following preset list of labels:
· (default label) · Audio Receiver · Cable · Compact Disc · DTV · DVD · Game Console · HDMI Switch (HDMI inputs only) · Laser Disc · Satellite/DSS · VCR · Video Recorder · Hide (to hide an unused input in the Input Selection
screen and in the Channel BrowserTM Inputs list)
Note: If you select PC in the Input Selection screen, you can choose only " ", "Game Console", or "Hide" as the label.
To label the video input sources:
1 Press and open the Preferences menu. 2 Highlight Input Labeling and press .

3 Press or to highlight the video source you
want to label.

Video

Audio Receiver Cable
Compact Disc DTV

Video

Audio Receiver Cable
Compact Disc DTV

(for C110U1, E210U1)

(for G310U1)

(continued)
28

Chapter 6: Using the TV's features

4 Press or to select the desired label for that
input source. If a particular input is not used, you can select Hide as the label, which will cause that input to be "grayed out" in the Input Selection
screen and skipped over when you press on
the remote control.
5 To save the new input labels, highlight Done and
press . To revert to the factory default labels, highlight
Reset and press .
Input labeling example:
The screen below left shows the default Input Selection screen (with none of the inputs labeled as a specific device). The screen below right is an example of how you could label the inputs if you connected a VCR to ColorStream HD, a video recorder to HDMI 1, and a DVD player to HDMI 2.

ColorStream HD HDMI 1 HDMI 2

Input Selection
0 ANT/CABLE 1 Video 2 VCR 3 Video Recorder 4 DVD 5 PC

ANT/CABLE

Input Selection screen with no inputs labeled

0 - 5 / INPUT to Select

Navigate

Input Selection screen

with all inputs labeled

To clear the input labels:
1 Press and open the Preferences menu. 2 Highlight Input Labeling and press . 3 Highlight Reset and press .

Tuning channels

Tuning channels using the Channel BrowserTM
The Channel BrowserTM provides an easy navigation interface for all your channels and inputs. This feature allows you to:
· Navigate the contents of all of your inputs. · Keep a list of your favorite channels (see
"Favorites Browser," below).
· Quickly surf and tune your recently viewed channels/inputs from the Channel BrowserTM
History List (illustrated on the right diagram).
· Surf via Browse mode (to immediately tune channels as you highlight them in the Channel BrowserTM) or
Select mode (to surf over channels in the Channel BrowserTM before you select one to tune).
· Quickly change inputs from the Inputs List. · Quickly select REGZA-LINK® devices from the
REGZA-LINK® List.

Favorites Browser
The Favorites Browser allows you to quickly set up a favorite channels/inputs list that is integrated into the Channel BrowserTM. To add a favorite channel/input:
1 Tune to the channel or input. 2 Press and hold for 3 seconds.
Note: Additions are added to the beginning of the Favorites list on the left side of the Channel BrowserTM. To delete a favorite channel/input:
1 Press to open the Favorites browser list. 2 Highlight the channel or input to delete by
pressing or .
3 Press and hold for 3 seconds. The channel/
input will be removed from the Favorites list.
To set up the Channel BrowserTM:
1 From the Preferences menu, highlight Channel
Browser Setup and press .
2 Press to highlight Navigation, and then press
or to select either Browse Mode or Select Mode.
3 Press to highlight History List, and then press
or to select the setting you prefer: either On, or Off. Note: History List will be cleared every time the TV is powered off.
4 Press to highlight ANT/CABLE List, and then
press or to select On or Off.
5 Press to highlight Inputs List, and then press
or to select On or Off.
6 Press to highlight Favorites List, then press
or to select On or Off.
7 Press to highlight REGZA-LINK® List, and then
press or to select On or Off.
Note: REGZA-LINK® List will be automatically grayed out and set to Off when Enable REGZA-LINK® is switched to Off. (See "To set the REGZA-LINK® Setup" on page 48 for more information.)
(continued)
29

Chapter 6: Using the TV's features

8 To save your entries, highlight Done and press
. To return to factory defaults, highlight Reset
and press .

To open the Channel BrowserTM:
· Press or on the remote control. · Press to surf backward through the previously
tuned channels in the History list, the channels in the ANT/ CABLE channel list, the inputs in the Inputs list, the REGZA-LINK® devices in the REGZA-LINK® list, or the favorite channels/inputs in the Favorites list.
· Press to surf forward through the channel History, the ANT/CABLE channel list, the Inputs list, the REGZA-LINK® list, or the favorite channels/inputs in the Favorites list.
Elements of the Channel BrowserTM

4 1 Current list (History, ANT/CABLE, Inputs,
Favorites, or REGZA-LINK) 2 Channel or input currently being viewed 3 Channel or input that is currently
highlighted in the browser 4 Channels stored in the History List
To toggle through the available lists:
After opening the Channel BrowserTM, press or to toggle among History, ANT/CABLE, Inputs, Favorites, and REGZA-LINK.
Note: ··The Channel BrowserTM opens in History
List by default. Once another list has been selected, the Channel BrowserTM will open in the last selected list. ··If all lists are turned off, pressing , , or will not display the Channel BrowserTM. If Favorites List is turned off, will have no effect.
··Pressing will bring up the Channel BrowserTM Favorites list regardless of the last selected list in the Channel BrowserTM.

To tune to a channel or input in Browse mode:
1 While watching TV, press or to open
the Channel BrowserTM and surf back to a previous item or surf forward to the next item in the list. In Browse mode, when you stop on an item in the Channel BrowserTM, it will be highlighted and the TV will automatically tune to the channel or input.
2 Press to close the Channel BrowserTM.

To tune to a channel or input in Select mode:

1 While watching TV, press or to open the
Channel BrowserTM and surf back to a previous item
or forward to the next item in the list. In Select mode, when you stop on an item in the Channel BrowserTM, it will be highlighted but you

must press to tune the TV to the highlighted item.

2 Press 3 Press

to tune the TV to the highlighted item. to close the Channel BrowserTM.

Adding and clearing channels and inputs in the History List

Adding channels and inputs to the History List:
As a channel or input is tuned, the Channel BrowserTM adds it to the History List and displays it on the "right side" of the Channel BrowserTM. Previously tuned channels/inputs are "shifted" to the left, eventually moving off the left side. Press to surf backward through the previously tuned channels/inputs. Any channel or input that is tuned repeatedly will not be repeated in the History List, but instead is moved to the end of the list on the right side of the Channel BrowserTM.
The Channel BrowserTM will store the following channels:
· All channels that are tuned using the numeric buttons on the remote control.
· All channels that are tuned using or on the remote control.
Note: Whenever an item is selected that cannot be tuned (for various reasons), the TV will automatically tune to the previously viewed channel or input.

(continued)
30

Chapter 6: Using the TV's features

Clearing channels from the History List: · Reconfiguring the ANT/CABLE input will clear the
History List.

Note: See page 24 for details on configuring the antenna input.
· Turning off the TV will clear the History List.
Setting the Channel Tuning Mode

This feature allows you to choose how tuning will be handled for analog and digital channels when the TV is in Antenna mode.
Note: To use this feature, the Input Configuration must be set to Antenna ( page 24).

The channel tuning mode has three options.

Mode Standard
Auto (default)
Digital

Description
Both analog and digital channels can be tuned normally
Digital channels will have priority when manually entering a channel number using the Channel Number (0-9) on the remote control, analog channels can still be tuned by / , if available
Only digital channels can be tuned

To set the Channel Tuning Mode:
1 From the Setup menu, highlight Installation and
press . A new set of Installation menu icons will appear.
2 Open the Terrestrial menu, highlight Channel
Tuning Mode, and then press to select your desired mode.
Note: ··The Channel Options windows as well as
the Channel Browser ANT/CABLE list will be updated automatically when you change the mode. Also, the History List will be cleared, but the Favorites List will be saved.
··Even if the Channel Tuning Mode is set to Digital, analog channel 3 will still be the default channel to prevent the initial case where no digital channels have been found in prior channel scans. (Channel Options will not have anything listed until a scan is done.)

Tuning to the next programmed channel
To tune to the next programmed channel: Press or on the remote control or TV control panel.
Note: This feature will not work unless you program channels into the TV's channel memory ( page 25).

Tuning to a specific channel (programmed or unprogrammed)
Tuning analog channels: Press the Channel Number (09) on the remote control. For example, to select channel 125, press 1, 2, 5, then .

Tuning digital channels:
Press the Channel Number (09) on the remote control, followed by the dash ( ) button and then the sub-channel number. For example, to select digital channel 125-1, press 1, 2, 5, , 1, then .
Note: If a digital channel is not programmed-- either through the automatic channel scan ( page 25) or the Channel add function ( page 26)--you will have to tune the RF channel using the Channel Number and dash ( ) on the remote control.

Switching between two channels using Channel Return

The Channel Return feature allows you to switch between two channels without entering an actual channel number each time.

1 Select the first channel you want to view.

2 Select a second channel using the Channel

Number buttons (and the dash ( ) button if

selecting a digital channel).

3 Press

on the remote control. The previous

channel will display. Each time you press , the

TV will switch back and forth between the last two

channels that were tuned.

Note: If you press

from a non-antenna

input, the TV will return to the last-viewed input.

(continued)
31

Chapter 6: Using the TV's features

Switching between two channels using SurfLockTM
The SurfLockTM feature temporarily "memorizes" one channel to the button, so you can return to that channel quickly from any other channel by pressing
.

To memorize a channel to the button:
1 Tune the TV to the channel you want to program into
the button.
2 Press and hold for about 2 seconds until the
message "Memorized" appears on-screen. The channel has been programmed to the button.
3 You can then change channels repeatedly, and when
you press , the memorized channel will be tuned.
The TV will return to the memorized channel one time only. Once you press and then change channels again, the CH RTN memory will be cleared and the button will function as Channel Return, by switching back and forth between the last two channels that are tuned. This feature also works for external inputs.
Selecting the picture size

You can view many program formats in a variety of picture sizes -- Full, TheaterWide 1/ 2/ 3, 4:3, Native, Normal, and Dot by Dot.
Note: The "picture size" illustrations are examples only. The format of the image (in any of the picture sizes) will vary depending on the format of the signal you are currently watching. Select the picture size that displays the current program the way that looks best to you.
You can save separate picture size preferences for each input on your TV.

To select the picture size using the remote control:

1 Press

on the remote control.

2 While the Picture Size menu is open, you can do one

of the following to select the desired picture size:

· Repeatedly press

· Press the corresponding Number button (05) while the Picture Size menu is opened.

· Press or while the Picture Size menu is open.

To select the picture size using the menus:
1 Select Picture Size in the Theater Settings menu. 2 Press or to select the desired picture size
setting.
3 Highlight Done and press .
Note: Some of the picture sizes may not be available depending on the receiving signal format (those will be "grayed out" in the Picture Size screen).
Using these functions to change the picture size (i.e., changing the height/ width ratio) for any purpose other than your private viewing may be prohibited under the Copyright Laws of the United States and other countries, and may subject you to civil and criminal liability.
Note: If you select one of the TheaterWide® picture sizes, the top and bottom edges of the picture (including subtitles or captions) may be hidden. To view the hidden edges, either scroll the picture (TheaterWide 2 and 3 only) or try viewing the program in Full or 4:3 picture size.
Picture Size
Full (for 16:9 [480i, 480p] source programs only)
If receiving a squeezed 4:3 format program, the picture is stretched wider to fill the width of the screen but not stretched taller.
(for 1080i, 1080p and 720p signal program source)
The edges surrounding the picture may be hidden.
TheaterWide 1 (for 4:3 format programs)
The center of the picture remains close to its original proportion, but the left and right edges are stretched wider to fill the screen.
(continued)

Chapter 6: Using the TV's features

Picture Size
TheaterWide 2 (for letter box programs)

Picture Size
4:3

A B C D E F G - - - - - - - - - - - - - - - -
The top and bottom edges of the picture may be hidden*.
TheaterWide 3 (for letter box programs with subtitles)

A B C D E F G - - - - - - - - - - - - - - - -

A B C D E F G - - - - - - - - - - - - - - - - - - - - - - - - - -

The top and bottom edges are hidden*.

Native (for 480i (HDMI), 480p (HDMI), 720p, 1080i, and 1080p signal programs)

· If receiving a 480i (HDMI), 480p (HDMI), 720p, 1080i, or 1080p signal program, Native mode scales the video to display the entire picture within the borders of the screen (i.e. no overscanning).
· This is especially useful for external HD sources such as DVHS movies, or PC graphics.
Note:
··This mode is supported only for HDMI (1080p,1080i, 720p, 480p, and 480i), ColorStream (1080i and 720p), and ANT/ CABLE (digital) inputs (1080p,1080i, and 720p).
··Depending on the input signals, the border of the picture may be hidden, displayed in black, or noisy.

Some program formats will display with sidebars and/or bars at the top and bottom.
Normal (for VGA, SVGA, XGA, WXGA, and SXGA sources and Photo files)
"Normal" is a non-stretched display. Some input signal formats will display with sidebars and/or bars at the top and bottom.
Dot by Dot (for VGA, SVGA, XGA, WXGA, and SXGA sources only)
The "Dot by Dot" picture is non-scaling display. Depending on the input signal formats, picture is displayed with sidebars and/or bars at the top and bottom. (Example: VGA input source)
** To view the hidden areas (such as subtitles or captions), see below "Scrolling the TheaterWide® picture".

(continued)
33

Chapter 6: Using the TV's features

Scrolling the TheaterWide® picture (TheaterWide 2 and 3 only)
You can set separate scroll settings for the TheaterWide 2 and TheaterWide 3 modes for each input. To set the scroll settings:
1 Press and open the Picture menu. 2 Highlight Theater Settings and press .

3 In the Picture Size field, select either TheaterWide 2 or
TheaterWide 3 (you cannot scroll in any other mode).
4 Press to highlight the Picture Scroll field. 5 Press or to scroll the picture up and down as
needed.
6 To save the new settings, highlight Done and press
. To revert to the factory defaults, highlight Reset
and press .
Note: When receiving a signal at 480i resolution, the picture scroll function may have limited adjustment range.

Using the auto aspect ratio feature

When the auto aspect ratio feature is set to On, the TV will automatically select the picture size when one of the following input sources is received: · A 480i, 480p, 720p, 1080i digital signal from the
ANT/CABLE input
· A 480i signal from the VIDEO input
· A 480i signal from the ColorStream HD input
· A 480i, 480p, 720p, 1080i, 1080p, or VGA (60Hz) signal from the HDMI 1, HDMI 2, and (for G310U1)HDMI 3

Aspect ratio of signal source 4:3 normal
4:3 letter box
16:9 full
Not defined (no ID-1 data or HDMI aspect data)

Automatic aspect size (automatically selected when Auto Aspect is On)
4:3
TheaterWide 2
Full
The current picture size you set under "Selecting the picture size" on page 32

Note: The auto aspect ratio feature is not applicable to PC input.
To turn on the auto aspect ratio feature:
1 Press and open the Picture menu. 2 Highlight Theater Settings and press . 3 In the Auto Aspect Ratio field, select On. 4 To save the new settings, highlight Done and
press . To revert to the factory defaults, highlight Reset and press .
To turn off the auto aspect ratio feature: Select Off in step 3 above.
Using the FREEZE feature

To use the FREEZE feature:

1 When viewing the TV, press
picture a still picture.

to make the

2 To return to the moving picture, press
again (or any other button).

Note: If the TV is left in FREEZE mode for more than 15 minutes, the FREEZE mode will automatically be released and the TV will return to moving picture.

Using the FREEZE function for any purpose other than your private viewing may be prohibited under the Copyright Laws of the United States and other countries, and may subject you to civil and criminal liability.

Adjusting the picture

Selecting the picture mode
You can select your desired picture settings from four different modes, as described below.

Mode

Picture Quality

Sports

Bright and dynamic picture (factory setting)

Standard

Standard picture settings (factory setting)

Movie

Lower contrast for darkened room (factory setting)

Designed for viewing of PC tables and PC
documents

Preference Your personal preferences

Note: PC mode is available for HDMI and PC inputs only (grayed out for other input sources).
(continued)

Chapter 6: Using the TV's features

To select the picture mode using the menu system:
1 Press and open the Picture menu. 2 Highlight Mode and press .

3 Press or to select the picture mode you
prefer and press .

Adjusting the picture quality

You can adjust the picture quality (Contrast, Backlight, DynaLightTM, Brightness, Color, Tint, and Sharpness) to your personal preferences.

Selection Contrast Backlight* DynaLight** Brightness Color Tint Sharpness

Pressing lower darker On/Off darker paler reddish softer

Pressing higher lighter On/Off lighter deeper greenish sharper

** Backlight This feature adjusts the brightness of the entire screen. When in video mode and no signal is input, this will automatically be set to 0. (Settings are stored in memory.)
** DynaLight This function automatically strengthens the black coloring of dark areas in the video according to the level of darkness.

To adjust the picture quality:
1 Press and open the Picture menu. 2 Highlight Picture Settings and press . 3 Press or to select the picture quality you
want to adjust (Contrast, Backlight, DynaLight, Brightness, Color, Tint, or Sharpness), and then press or to adjust the setting, as described in the previous table.
4 To save the new settings, highlight Done and
press . You can use any of the picture modes ( "Selecting the picture mode," above left) as a starting point for adjusting the picture settings. To revert back to the base mode that you began adjusting the picture settings from, highlight Reset and press . The picture qualities you adjusted are automatically saved in the Preference mode ( "Selecting the picture mode," above left) until Reset is selected.
Using the closed caption mode
Base closed captions
The closed caption mode has two options: · Captions--An on-screen display of the dialogue,
narration, and sound effects of TV programs and videos that are closed captioned (usually marked "CC" in program guides). · Text--An on-screen display of information not related to the current program, such as weather or stock data (when provided by individual stations).
To view captions or text:
1 Press and open the Preferences menu,
highlight Base CC Mode.
2 Press or to select the desired closed caption
mode and press . · To view captions:
Highlight CC1, CC2, CC3, or CC4. (CC1 displays translation of the primary language in your area.)
Note: If the program or video you selected is not closed captioned, no captions will display on-screen.
(continued)
35

Chapter 6: Using the TV's features

· To view text: Highlight T1, T2, T3, or T4.
Note: If text is not available in your area, a black rectangle may appear on screen. If this happens, set the Base CC Mode to Off. · To turn off the closed caption mode: Select Off in step 2 above. Note: A closed caption signal may not display in the following situations: ··When a videotape has been dubbed ··When the signal reception is weak ··When the signal reception is non-standard
Digital CC Settings
You can customize the closed caption display characteristics by changing the background color, opacity, text size, type, edge, and color. Note: ··This feature is available for digital channels
only. ··You cannot set the Caption Text and
Background as the same color. To customize the closed captions:
1 Press and open the Preferences menu. 2 Highlight Digital CC Settings and press . 3 Press or to highlight the characteristic you
want to change, and then press or to select the format for that characteristic (see table below).
4 To save the new settings, highlight Done and press
. To revert to the factory defaults, highlight Reset and press .

Caption Size Auto, Small, Standard, Large

Caption Text Type

Auto, Default, Mono w. Serif, Prop. w. Serif, Mono w/o Serif, Prop. w/o Serif, Casual, Cursive, Small Capitals

Caption Text Edge

Auto, None, Raised, Depressed, Uniform, Left Drop Shadow, Right Drop Shadow

Caption Text Color

Auto, Black, White, Red, Green, Blue, Yellow, Magenta, Cyan

Text Foreground Auto, Transparent,

Opacity

Translucent, Flashing, Solid

Background Color

Auto, Black, White, Red, Green, Blue, Yellow, Magenta, Cyan

Text Background Auto, Transparent,

Opacity

Translucent, Flashing, Solid

Caption Text Edge Color

Auto, Black, White, Red, Green, Blue, Yellow, Magenta, Cyan

CC Selector
You can use the CC Selector to temporarily override the default analog caption mode (set in Base CC Mode) for a particular channel. However, once you change to another analog channel, the closed caption setting will automatically change back to the current Base CC Mode setting. You can also use the CC Selector to select digital closed caption services (if available). When such services are not available, the CC Selector presents a default list of services. If the selected service is not available, the next best service will be used instead.
To select closed captions:
1 Press and open the Preferences menu. 2 Highlight CC Selector and press . 3 Press or to select Closed Caption, and then
press or to select the desired service.
4 Press .

Chapter 6: Using the TV's features

Adjusting the audio

Muting the sound

Press

on the remote control to partially reduce

(1/2 MUTE) or turn off (MUTE) the sound. Each time

you press

, the mute mode will change in the

following order:

1/2 Mute Mute Volume

If the closed caption mode is set to Off when you select "MUTE" mode, the closed caption feature is automatically activated if the TV program is Closed Captioned. To mute the audio without automatically activating the closed caption feature, use to set the volume to 0. See "Using the closed caption mode" ( page 35) for more information on closed caption modes.
Note: If you modify items in the SOUND menu while Mute is active, the Mute will automatically be cancelled.
Using the digital audio selector
You can use the Digital Audio Selector to conveniently switch between audio tracks on a digital channel (for those channels that have multiple audio tracks). This temporarily overrides the audio track chosen by the language option under Audio Setup ( "Selecting stereo/SAP broadcasts").
To use the digital audio selector:
1 Press and open the Sound menu. 2 Highlight Digital Audio Selector and press .

3 Press or to select Audio, and then press
or to select the desired service.
4 Press .
Selecting stereo/SAP broadcasts
The multi-channel TV sound (MTS) feature allows you to output high-fidelity stereo sound. MTS also can transmit a second audio program (SAP) containing a second language, music, or other audio information (when provided by individual stations). When the TV receives a stereo or SAP broadcast, the symbol " " or word "SAP" appears on-screen when
is pressed. The MTS feature is only available for analog signals on the ANT/CABLE input.

To listen to stereo sound:
1 Press and open the Sound menu. 2 Highlight Audio Setup and press . 3 In the MTS field, select Stereo. 4 To save the new settings, highlight Done and press
. To reset the settings to the factory defaults,
highlight Reset and press . Note: ··You can typically leave the TV in Stereo
mode because it will automatically output the type of sound being broadcast (stereo or monaural). ··If the stereo sound is noisy, select Mono to reduce the noise.
To listen to an alternate language on an
ATSC digital station (if available):
Highlight the Language field in step 3 above, and then press or to select the language you prefer.
To listen to a second audio program on an
analog station (if available):
Select SAP in step 3 above. Note: ··A second audio program (SAP) can be heard only
on those TV stations that offer it. For example, a station might broadcast another language as a second audio program. If you have SAP on, you will see the current program on the screen but hear the other language instead of the program's normal audio. ··If you have SAP on and the station you are watching is not broadcasting a second audio program, the station's normal audio will be output. However, occasionally there is no sound at all in SAP mode. If this happens, set the MTS feature to Stereo mode.
Adjusting the audio quality
You can adjust the audio quality by adjusting the bass, treble, and balance.
To adjust the audio quality:
1 Press and open the Sound menu. 2 Highlight Audio Settings and press . 3 Press or to highlight the item you want to
adjust (Bass, Treble, or Balance).
4 Press or to adjust the level.
· makes the bass or treble weaker or increases the balance in the left channel (depending on the
item selected). · makes the bass or treble stronger or increases
the balance in the right channel (depending on the item selected).
5 To save the new settings, highlight Done and press
. To reset the settings to the factory defaults,
highlight Reset and press .
(continued)
37

Chapter 6: Using the TV's features

Selecting the optical audio output format
You can use this feature to select the optical audio output format when you connect a Dolby Digital decoder or other digital audio system to the Optical Audio Out terminal on the TV (see "Connecting a digital audio system" on page 18).
To select the optical audio output format:
1 Press and open the Sound menu. 2 Highlight Audio Setup and press . 3 In the Optical Output Format field, select either
Dolby Digital or PCM, depending on your device.
4 To save the new settings, highlight Done and press
. To revert to the factory defaults, highlight Reset
and press .
Using the Dolby® Digital Dynamic Range Control feature
This dynamic range control feature causes Dolby Digital dynamic range to be further compressed, allowing you to switch from digital to analog broadcasts at the same dynamic range.
To use the Dolby Digital Dynamic Range Control:
1 Press and open the Sound menu. 2 Highlight Audio Setup and press . 3 In the Dolby Digital Dynamic Range Control field,
select Compressed. When Standard is selected, the audio is output with minimal compression.
4 To save the new settings, highlight Done and press
. To revert to the factory defaults, highlight
Reset and press .
Note: ··This feature is available when turned to a
digital RF channel with the Dolby Digital signal. ··The Dolby Digital Dynamic Range Control will function in relation to Optical Output Format (PCM mode).

Using the Locks menu
The Locks menu includes the Enable Rating Blocking, Edit Rating Limits, Input Lock, Panel Lock, GameTimer, and New PIN Code features. You can use these features after entering the correct PIN code.
Entering the PIN code 1 Press and highlight the Locks menu icon.
2 Press , which displays the PIN code entry
screen. · The Lock System screen (below) appears if a
PIN code has not been stored. Press the number buttons to enter a new four-digit code, enter the code a second time to confirm, and press .
· The Locks/Active screen appears if the PIN code is already stored. Use the number buttons to enter your four-digit code and press .
If the wrong PIN code is entered, the message "Incorrect PIN code, please try again!" appears. Highlight Retry and press . Enter the code again and press . When the correct PIN code is entered, the Locks menu opens. Note: PIN code can not be set to "0000".
If you cannot remember your PIN code
While the PIN code entering screen is displayed, press four times within five seconds. The PIN code will be
cleared and you can enter a new PIN code.

(continued)
38

Chapter 6: Using the TV's features

Changing your PIN code 1 Press and highlight the Locks menu icon. 2 Press to display the PIN code entering screen. 3 Enter your four-digit PIN code and press . 4 Press to highlight New PIN Code and press . 5 Press the number buttons to enter a new four-digit
code. Reenter the PIN code to confirm it.
6 Press . The new PIN code is now active.
Note: PIN code can not be set to "0000".
Blocking TV programs and movies by rating (V-Chip)
Some TV programs and movies include signals that classify the content of the program (as unsuitable for younger viewers). The V-Chip feature in this TV detects the signals and blocks the programs according to the ratings you select. (For rating descriptions, see the tables on the next page.)
To block and unblock TV programs and movies:
1 Press and highlight the Locks menu icon. 2 Press to display the PIN code entering screen. 3 Enter your four-digit PIN code and press . 4 Press to highlight Enable Rating Blocking. 5 Press to select On, and then press .
6 Press to highlight Edit Rating Limits and press
. The Edit Rating Limits screen appears.
7 Press and then press to select the
level of blocking you prefer. A box with an " " is a rating that will be blocked. As you highlight a rating, a definition for the rating appears at the bottom of the screen.
8 When done selecting the ratings you want to
block, highlight Done and press . Note: The above blocking level selection is for the U.S V-Chip system. For the Canadian Rating Menu, highlight "Canada RS" and press .

Downloading an additional rating system for blocking TV programs and movies
In the future, an additional rating system may become available for use in selectively blocking programs.
Note: The currently tuned station must be receiving a digital signal before an additional rating system can be downloaded.
To download the additional rating system (if available):
1 Press and highlight the Locks menu icon. 2 Press to display the PIN code entering screen. 3 Enter your four-digit PIN code and press . 4 Press to highlight Enable Rating Blocking. 5 Press to select On, and press . 6 Press to highlight Edit Rating Limits and press
. The Edit Rating Limits screen appears.
7 Highlight Alt RS and press . The Edit Alternate
Ratings screen will appear.
Note: ··The Alt RS button will only be available if an
additional rating system is currently available. ··It may take several minutes for the TV to
download the additional rating system. ··The information displayed in the Alternate
Ratings screen will depend on the configuration of the additional rating system available at the time of download.
8 Press and then press to select the level
of blocking you prefer. A box with an " " is a rating
that will be blocked.
9 When you are finished selecting the ratings you want
to block, highlight Done and press .
10In the Edit Rating Limits screen, highlight Done and
press . Note: ··The additional rating system can only be
downloaded one time. You will not be able to download any updates to the rating system should such updates become available. ··The additional rating system is not designed, transmitted, or controlled by the TV or Toshiba, nor is the availability of an additional rating system determined or controlled by Toshiba. Similarly, the rating of programs in an additional rating system is not determined, transmitted, or controlled by the TV or Toshiba. ··The additional rating system is an evolving technology; therefore, availability, content, and format may vary.
(continued)
39

Chapter 6: Using the TV's features

Independent rating system for broadcasters

Ratings Description and Content themes

TV-MA

Mature Audience Only (This program is specifically designed to
be viewed by adults and therefore
may be unsuitable for children under 17.) L) Crude or indecent language S) Explicit sexual activity V) Graphic violence

TV-14

Parents Strongly Cautioned (This program contains some material that many parents would find unsuitable for children under 14 years of age.) D) Intensely suggestive dialog L) Strong, coarse language S) Intense sexual situations V) Intense violence

TV-PG TV-G TV-Y7, TVY7FV TV-Y

Parental Guidance Suggested (This program contains material parents may find unsuitable for younger children.) D) Some suggestive dialog L) Infrequent coarse language S) Some sexual situations V) Moderate violence
General Audience (Most parents would find this program suitable for all ages.)
Directed to Older Children (This program is designed for children age 7 and above. Note: Programs in which fantasy violence may be more intense or more combative than other programs in this category are designated TV-Y7FV.)
All Children (This program is designed to be appropriate for all children.)

Independent rating system for movies

Ratings Description and Content themes

X-rated (For adults only)

NC-17

Not intended for anyone 17 and under

Restricted (Under 17 requires accompanying parent or adult)

PG-13

Parents Strongly Cautioned (Some material may be inappropriate for children under 13)

Parental Guidance Suggested

(Some material may not be suitable

for children)

General Audience (Appropriate for all ages)

Note:
··If you place an " " in the box next to " None Rated" programs rated "None" will be blocked; however, programs that do not provide any rating information will not be blocked.
··To display the rating of the program you are watching, press on the remote control. If it is rated "None" the word "NONE" appears
in the screen (as shown below right). If rating information is not provided, no rating
will appear in the screen.

Blocking TV programs by Canada rating

1 Press and highlight the Locks menu icon. 2 Press to display the PIN code entering screen. 3 Enter your four-digit PIN code and press . 4 Press to highlight Enable Rating Blocking. 5 Press to select On. 6 Press to highlight Edit Rating Limits and press
. The Edit Rating Limits screen appears.
7 Highlight Canada RS and press . The
Canadian Rating Menu will appear.
8 Press and then press to select the
level of blocking you prefer. A box with an " "
is a rating that will be blocked.
9 When you have finished selecting the ratings you
want to block, highlight Done and press .
10 In the Edit Rating Limits screen, highlight Done

and press .

English Ratings E C C8+ G PG 14+ 18+

Description and Content themes Exempt shows Children ages of 2 to 7 years Children 8 years and older General programming Parental Guidance Viewers 14 and older Adult programming

French Ratings E G 8 ans+ 13 ans+ 16 ans+ 18 ans+

Description and Content themes Exempt shows General programming Not recommended for ages under 8 Not recommended for ages under 13 Not recommended for ages under 16 Programming restricted to adults

(continued)

Chapter 6: Using the TV's features

Unlocking programs temporarily
If you try to tune the TV to a program that exceeds the rating limits you set, the TV will enter program lock mode and the following message will appear onscreen:
This program exceeds the rating limit you set. Push 'MUTE' to enter PIN.

You can either temporarily unlock the program or select an unlocked program to watch.

To temporarily unlock the program:

1 Press

2 Enter your four-digit PIN code and press . If the
correct code is entered, the program lock mode is

released and the normal picture appears. All locking

will be enabled when the TV channel is changed.

Using the input lock feature
You can use the Input Lock feature to lock the video inputs (Video, ColorStream HD, HDMI 1, HDMI 2, HDMI 3 (only for G310U1), and PC) and channels 3 and 4. You will not be able to view the input sources or channels until you unlock the inputs.

To lock/unlock the video inputs:
1 From the Locks menu, Press to display the PIN
code entering screen.
2 Enter your four-digit PIN code and press . 3 Press to highlight Input Lock and press to
select the level of video input locking you prefer, as described below.

Mode

Description

Video

Locks Video, ColorStream HD, HDMI 1, HDMI 2, HDMI 3(only for G310U1), and PC .

Video+

Locks Video, ColorStream HD, HDMI 1,
HDMI 2, HDMI 3 (only for G310U1), PC
and channels 3 and 4.
· Select Video+ if you play video tapes
via an ANT/CABLE input.

Off

Unlocks all video inputs and channels 3 and 4.

4 Press .
Locking channels
With the Lock feature, you can lock specific channels. The locked channels can only be accessed by entering the PIN.

To lock channels:
1 From the Setup menu, highlight Installation and
press .
2 Press or to select Channel Options and
press . The list of channels will appear.
3 Press and then or to select a channel in
the lock column.
4 Press PIN code entry will be required to set a
locked channel. Note: If the PIN code has not been set yet, a warning message will appear.
5 A will appear in the box.
To remove the , press again.
Using the GameTimer®
You can use the GameTimer to set a time limit for playing a video game (30120 minutes). When the GameTimer expires, the TV enters Input Lock mode and locks out the input source for the video game device.
To set the GameTimer®:
1 From the Locks menu, press to display the PIN
code entering screen.
2 Enter your four-digit PIN code and press . 3 Press to highlight GameTimer and press to
select the length of time until the Input Lock is activated (30, 60, 90, or 120 minutes).
To cancel the GameTimer®: Select Off in step 3 above. To deactivate the Input Lock once the GameTimer® has activated it: Set the Input Lock to Off ( "Using the input lock feature" as described). Note: ··A message will appear when 10 minutes,
3 minutes, and 1 minute remain on the GameTimer. ··If the TV loses power with time remaining on the GameTimer, when power is restored the TV will enter Input Lock mode (as if the GameTimer had been activated) and you will have to deactivate the Input Lock (as described before).
(continued)
41

Chapter 6: Using the TV's features

Using the panel lock feature
You can lock the control panel to prevent your settings from being changed accidentally (by children, for example). When the panel lock is On, none of the controls on the TV control panel will operate except POWER.
To lock the panel:
1 Press and highlight the Locks menu icon. 2 Press to display the PIN code entering screen. 3 Enter your four-digit PIN code and press . 4 Press to highlight Panel Lock. 5 Press to select On. When the control panel
is locked and any button on the control panel (except POWER) is pressed, the message "NOT AVAILABLE" appears.

3 Highlight PC Settings and press .
00:00
Note: If a PC is not connected or there is no PC input signal, this feature will be grayed out in the Setup menu.
4 Press or to highlight the item you want to
adjust.
5 Press or to make the appropriate
adjustments.

To unlock the control panel: Select Off in step 5 above, or press and hold the VOLUME button on the TV control panel for about 10 seconds until the volume icon appears.
Using the PC settings feature
You can view an image from a PC on the TV screen. When a PC is connected to the TV's PC IN terminal, you can use the PC Settings feature to make adjustments to the image. If the edges of the picture are cut off, readjust the Horizontal Position and Vertical Position. If the picture is affected by interference, readjust the Clock Phase and Sampling Clock.
To adjust the PC settings:
1 Repeatedly press to select PC input mode
( "Selecting the video input source to view" page 28).
2 Press and open the Setup menu.

Note: The screen is disrupted momentarily when adjusting the PC settings. This is not a sign of malfunction.

Mode
Horizontal Position
Vertical Position

Description
Moves the picture left/right. The adjustment range is within ±10 from center.*
Moves the picture up/down. The adjustment range is within ±10 from center.*

Helps to reduce noise and sharpen the picture. Clock Phase
The adjustment range is within ±16 from center.*

Sampling Clock
Reset

Helps to reduce noise and minimize periodic vertical stripes on the screen. The adjustment range is within ±10 from center.*
Highlight this item then press to get an optimum adjustment automatically.

** The default settings may vary depending on the input signal format.

(continued)
42

Chapter 6: Using the TV's features

Setting the PC Audio
This function allows you to output or mute the sound from your PC when connecting using the PC IN terminal and an analog RGB cable. ( page 18) To set the PC Audio:
1 Press and open the Sound menu. 2 Highlight Audio Setup and press . 3 Press or to select PC Audio and then press
or to select No or Yes. Yes: When viewing the PC input, the audio from the PC Audio input can be heard. No: When viewing the PC input, there will be no audio. Note: Because the PC and HDMI-1 inputs share the same set of analog audio inputs, the PC Audio menu setting influences the HDMI 1 Audio menu setting. If PC Audio is set to "No" the HDMI 1 Audio setting changes to "Auto" If PC Audio is set to "Yes" the HDMI 1 Audio setting is set to "Digital" and is grayed out in the menu. (Also see item 3 on page 12 and "Setting the HDMI® Audio mode" on page 26.)
Using the Media Player
Using the Media Player with USB
You can enjoy photos or music contents stored on a USB storage device.
Photo Viewer specifications: Data type: JPEG Exif ver2.1 File format: JPEG Maximum photo size: 6 MB Maximum number of files: 500 / folder Maximum photo resolution: 1366 x 768 pixels (C110U1) 1920 x 1080 pixels (E210U1, G310U1)
Music Player specifications: File format: MP3 Sampling frequency: 16 kHz, 22.05 kHz, 24 kHz, 32 kHz, 44.1 kHz, 48 kHz Bit rate: from 8 to 320 kbps Maximum number of files: 500 / folder
Supported file system: FAT16 and FAT32

Note: ··Gently insert the USB device into the port and
do not remove while using the Media Player. ··USB device: USB Mass Storage Class device
(MSC) ··Support is not guaranteed for all devices. ··Connect the USB device directly to the TV. ··Do not use a USB Hub. ··You must obtain any required permission from
copyright owners to use copyrighted content. Toshiba cannot and does not grant such permission. ··Depending on the file size and amount in your USB storage device, it may take some time to load before content is viewable. A message will display on-screen when loading files from the USB storage device. ··Only limited types of U3 USB devices are supported. Therefore, it is suggested you do not to use U3 USB for the Media Player function. ··Non-supported characters in the filename will be replaced with a square( ).
To select the Auto Start function
1 Press and or to select the Setup menu. 2 Press to select Media Player, and then press . 3 Press or to select Auto Start. 4 Press or to select On or Off.
To open the Media Player
There are two methods for starting the Media Player.
Automatically:
1 Gently insert a supported USB storage device to
the USB port on the rear side of the TV. A prompt will appear.
Note: If you repeatedly insert and remove the USB device, the prompt may not appear.
2 Press or to select Yes, and then press ,
the Media Player menu will appear. When you select No, nothing happens.
Note:
··The prompt will disappear after about 10 sec. ··If Auto Start is set to Off, you can start the Media
Player manually. (continued)
43

Chapter 6: Using the TV's features

Manually:
1 Press and or to select the Setup menu. 2 Press to select Media Player, and then press
.
3 Press or to select Photo or Music then press
.
Note: ··The viewer will also open even if there are no
photo or music files. ··While the Media Player is active, the main
menu cannot be displayed.
Viewing photo files
There are three types of view modes. Multi View: This view allows you to search for photos in a grid format. These pictures are displayed using thumbnail data in each image file.

1 Press to view the next photo. Press to view
the previous photo.
2 Press to rotate the image 90° counterclockwise.
Press to rotate the image 90° clockwise.

Slideshow

This view allows you to watch a slideshow of the photos. In this mode, only files located in the selected directory will be played.

1 To start slideshow, press in the Single View
mode.
2 Press or to view the previous or next photo.

To set Interval Time and Repeat settings:

1 Press to open the Quick Menu.

2 Press or to select either Interval Time or

Repeat.

3 Press or to adjust the setting and press

To close the Photo Viewer
1 Press . The television will return to the last
viewed channel or external input.

Playing music files
You can listen to music from a list of available files.

Date : 2009-07-29 05:10:15 640x480
1 Press to move the highlight in one
window. If all of the photos will not fit in one screen, when pressing at the top left thumbnail, the screen will move to the previous page. Conversely, when pressing at the bottom right thumbnail, the screen will move to the next page.
/ buttons can be used to page up/down the photo list when there are more photos than will fit onto one screen.
2 When you select a folder, press to move to
the next layer. Press to move back to the previous layer.
3 Press to view the selected photo in Single
View mode.
Single View
In this view mode, only files located in the selected directory shall be displayed. This view allows you to change the photo content manually. When moving from Multi View to the Single View, the currently selected photo shall be displayed.
44

Artist

ENTER

CH RTN

1 Press to select a file or folder. /
buttons can be used to page up/down the music list when there are more files than what will fit onto one screen.
2 When you select a folder, press to move to
the next layer. Press to move back to the previous layer.
3 With the desired file selected, press or to
start playback.
4 Press to stop playback.

(continued)

Chapter 6: Using the TV's features

Note: ··If playback finishes before is pressed, the
next file will automatically start to play from the beginning. ··Depending on the file size, it may take some time for playback to begin.
During playback

· Press

to pause.

· To resume normal playback, press

· To locate a specific file, press or

· To adjust volume , press / .

. repeatedly.

Note:
During playback, you can adjust the SOUND menu functions from the QUICK menu.

To set the repeat mode:
1 Press to open the Quick Menu. 2 Press or to select Repeat. 3 Press or to select Off, All or 1. 4 Press .

To close the Music Player
1 Press .

Viewing photo files and playing music files at the same time

While viewing photo files, this allows you to listen to music from a list of available files.
1 While viewing photo in the Single View or Slide
Show mode, press to open the Quick menu.

2 Highlight Background Music and press , the
music list will appear.

3 Select a music file and press to start playback.

4 Press

to move back the photo view mode,

now the music is playing in the background.

Contents Photo

Description Photo list (Multi view) Sorting To sort the folders and files

Description See page 44

1 Press

to open the Quick Menu from

Multi View mode.

2 Press or to select Sort.

3 Press or to select Title, New or Old to set the sorting rule. Title--File sorting rules: 1 Unicode priority 2 Numerical (0-9) Upper Case (A-Z) lowercase (a-z), Chinese 3 Increasing order New--From new to old according to the date and time when the picture was taken. Old--From old to new according to the date and time when the picture was taken.

Single View mode

See page 44

Slide Show mode

See page 44

Skip to previous/next photo See page 44

Slide Show Repeat play

See page 44

Slide Show Interval Time selection

See page 44

Contents Music

Description Music list (Multi view) Sorting To sort the folders and files

Description See page 44

1 Press

to open the Quick Menu.

2 Press or to select Sort.

3 Press or to select Title, New or Old to set the sorting rule.

Playback

See page 45

Pause

See page 45

Stop

See page 45

Skip

See page 45

Repeat play

See page 45

SOUND Settings

See page 37

Note: Sorting, Total Time display may not be available in all cases.

(continued)
45

Chapter 6: Using the TV's features

Setting the sleep timer
You can set the sleep timer to turn off the TV after a set length of time (maximum of 12 hours).
To set the sleep timer using the remote control: Press on the remote control to set the length of time until the TV turns off. Repeatedly press to increase the time in 10-minute increments, or press or to increase or decrease the time in 10-minute increments, to a maximum of 12 hours.
To set the sleep timer using the on-screen menus:
1 Press and open the Setup menu. 2 Highlight Sleep Timer and press . 3 Press the number buttons to enter the length of
time in 10-minute increments.
4 Press .
Note: When a power failure occurs, the sleep timer setting may be cleared.
To display the remaining sleep time:
Press . To cancel the sleep timer: Press repeatedly or press or until it is set to 0 minutes.

Automatic Power Down
The TV will automatically turn itself off (standby) after 4 hours, if you do not operate the TV either from the remote control or the TV control panel.
1 From the Preferences menu, highlight Energy
Saving Settings and press .
2 Press or to select Automatic Power Down. 3 Press or to select On or Off, and press .
Note:
· The Default setting of this feature is off. · 1 minute before switching to standby, a
warning message will appear. · When the following features are set, the
feature that is set for the nearest time will function.
-- Automatic Power Down -- Sleep Timer -- No signal auto power off (after 15 minutes
of no signal)
No Signal Power Down
The TV will automatically turn itself off after 15 minutes when no signal is detected. You can change the setting to Off for the following purposes: · Low signal strength of analog channel (no signal
detection.) · Only Audio L/R is connected to external input to
listen to music through the TV speakers.
1 From the Preferences menu, highlight Energy
Saving Settings and press .
2 Press or to select No Signal Power Down
and press .
3 Press or to highlight the item you want to
change, and press or to select On or Off.
Note:
· The default setting of this feature is On. · A warning message will appear 1 minute
before turning off.

(continued)
46

Chapter 6: Using the TV's features

Using REGZA-LINK®
This is a new feature that uses CEC technology and allows you to control Toshiba REGZA-LINK® compatible devices from the TV remote via HDMI connection ( page 17). When the Enable REGZA-LINK® in the REGZA-LINK® setup menu ( page 48) is set to On, the following REGZA-LINK® functions will be enabled.

REGZA-LINK® playback device (DVD player, etc.) control
With your TV's remote control, or using the REGZALINK Player Control menu, you can control the connected REGZA-LINK playback device you are watching.
Available remote control key functions:

Button pqtu

Description Begins playback. Stops playback. Pauses the picture during play or record mode. Skips forward. Skips backward. Fast-forwards. Rewinds/reverses. Navigate contents menu, etc. Enters contents menu, etc. Returns to the previous menu.

Note: These functions depend on the devices connected.

REGZA-LINK® Player Control menu functions:
1 Press and open the Preferences menu. 2 Highlight REGZA-LINK Player Control and press .

Energy Saving Settings
3 Press p or q to select the item you want to
control and press .

Item

Description

Power Turns the selected device on and off.

Root Menu

Accesses the top menu of the selected device.

Contents Menu

Accesses the contents list when you press
. At this time, the REGZA-LINK Player Control menu will disappear.

Setup Menu

Accesses the setup menu of a DVD player.

Top Menu Accesses the top menu of a DVD.

Accesses the menu of a DVD.

Note: · These functions depend on the devices that are
connected. · The REGZA-LINK Player Control item will be
grayed out in the following conditions:
--A non-HDMI input is currently selected.
--The Enable REGZA-LINK item is set to Off.

REGZA-LINK® input source selection
If a REGZA-LINK® device with HDMI switching capability (e.g. Audio Receiver) is connected to the HDMI input, you can select another REGZALINK® device that is connected to the master HDMI device using the TV's INPUT button. See page 28 for details.

Chapter 6: Using the TV's features

VOLUME and MUTE controls of Audio Receiver

With your TV's remote control, you can adjust or mute the sound volume of the Audio Receiver.

adjust the volume level.

turns off the sound.

Note:
··To use this function: -- Set Speaker Preference to Audio Receiver in the REGZA-LINK Setup menu.
-- Confirm that a connected REGZA-LINK® device (such as DVD player, etc) is selected for the Audio Receiver input source.
··You can also use this function when the audio receiver is connected to the TV's DIGITAL AUDIO OUT terminal (not HDMI connection). In this case, select a digital audio input mode on the Audio Receiver.
··These functions depend on the device connected.

Other REGZA-LINK® functions

When the Enable REGZA-LINK and each item in the REGZA-LINK Setup menu are set to On, the following functions will be enabled.

Item
TV Auto Input Switch
TV Auto Power Device Auto Standby
Speaker Preference

Description
If a connected HDMI device starts playing video or audio, the TV will automatically switch to the appropriate HDMI input.
If a REGZA-LINK® device is turned on, the TV turns on automatically.
If the TV is turned off the TV will send a message to turn off all of the REGZALINK® devices connected to the TV.
From this item, you can set your audio output preference to the TV speakers or the audio receiver speakers. When this item is set to Audio Receiver, the TV remote can be used to adjust or mute the volume of the audio. This item will be grayed out unless a REGZA-LINK® compatible audio receiver is connected.

Note: When you turn on the Audio Receiver, change its input source, or adjust the sound volume, the sound will be output from the audio receiver's speakers even if TV Speakers has been selected. Turn the TV off and on again to output the sound from the TV speakers.
To set the REGZA-LINK® Setup:
1 From the Setup menu, highlight REGZA-LINK
Setup and press .
2 Press p or q to highlight Enable REGZA-LINK. 3 Press t or u to select On.
Note: If you select Enable REGZA-LINK Off, the other items will be grayed out.
4 Press p or q to highlight the REGZA-LINK Setup
item you want to use, and press t or u to select On or desired mode.
· TV Auto Input Switch: On/Off · TV Auto Power: On/Off · Device Auto Standby: On/Off · Speaker Preference: TV Speakers/Audio Receiver
5 To save the new settings, highlight Done and press
. To revert to the factory defaults, highlight Reset and press .
Displaying TV status information
To display TV status information using : RECALL
Press RECALL on the remote control.
The following information will display (if applicable): · Current input (ANT/CABLE, VIDEO, etc.) · If ANT/CABLE is the current input, either "CABLE"
(for cable TV) or "ANT" (for over-the-air broadcasts). · Channel number (if in ANT/CABLE mode) · Digital signal strength indicator (bar graph in lower
right corner of box; for ATSC signal only) · Stereo, Mono or SAP audio status (when HDMI input
mode, Dolby Digital or PCM) · Video resolution · Aspect ratio of incoming video signal (4:3 or 16:9) · V-Chip rating status · GameTimer (if set)

(continued)
48

Chapter 6: Using the TV's features
To close the screen: Press again. To display TV status information using INFO: Press on the remote control. The following additional information will display for off air digital channels (if applicable): · Title · Duration · Detailed description
Note: The location of the banner can be moved to the top or bottom of the screen by pressing or while the RECALL or INFO display is onscreen.
Understanding the last mode memory feature
If power is lost while you are viewing the TV, the Last Mode Memory feature automatically turns on the TV when power is restored. Note: If you will be away from the TV for an extended period of time you should unplug the power cord.
49

Chapter 7: Using the TV's advanced features

Using the advanced picture settings features
Using Dynamic Contrast
Dynamic Contrast detects changes in picture quality that affect the appearance of your contrast settings and then automatically adjusts the video.
To select Dynamic Contrast preference:
1 From the Picture menu, highlight Picture Settings
and press .
2 Highlight Advanced Picture Settings and press . 3 Press or to select Dynamic Contrast. 4 Press or to select High, Middle, Low and Off. Using the static gamma feature
The static gamma feature allows you to adjust the levels of black in the picture. To adjust the static gamma settings:
1 Press and open the Picture menu. 2 Highlight Picture Settings and press . 3 Highlight Advanced Picture Settings and press .
· In the Static Gamma field, press or to adjust the static gamma. The adjustment range is within ±5 from center.
· If the setting is moved in the minus direction, the detail of black colors will be decreased.
· If the setting is moved in the plus direction, the detail of black colors will be increased.
4 To save the new settings, highlight Done and
press . To revert to the factory defaults, highlight Reset and press . Note: If you select one of the factory-set picture modes (Sports, Standard, Movie or PC) and then change the static gamma setting, the picture mode automatically changes to Preference.
50

Selecting the color temperature
You can change the quality of the picture by selecting from three preset color temperatures (Cool, Medium, and Warm), as described below.

Mode Cool Medium Warm

Picture Quality blueish neutral reddish

To select the color temperature:
1 Press and open the Picture menu. 2 Highlight Picture Settings and press . 3 Highlight Advanced Picture Settings and press
.
4 Highlight Color Temperature and press .
5 In the Color Temperature field, press or to select
the mode you prefer (Cool, Medium, or Warm).
6 Press or to select either B Drive or G Drive,
and then press or to adjust the settings.
· B Drive: makes the picture blueish. · G Drive: makes the picture greenish.
Note: The B Drive and G Drive settings are connected to the Color Temperature settings and will change based on which setting is selected in Step 5 above.
7 To save the new settings, highlight Done and
press . To revert to the factory defaults, highlight Reset and press .
Note: If you select one of the factory-set picture modes (Sports, Standard, Movie, or PC) and then change the color temperature mode, the picture mode automatically changes to Preference.

(continued)

Chapter 7: Using the TV's advanced features

Selecting the cinema mode
When you view a DVD (3:2 pulldown processed) from a DVD player connected to the VIDEO, ColorStream HD (component video), or HDMI inputs on the TV, smoother motion can be obtained by setting the Cinema Mode to Film.
To set the Cinema Mode to Film: (available for 480i and 1080i signals)
1 Press and open the Picture menu 2 Highlight Picture Settings and press . 3 Highlight Advance Picture Settings and press . 4 In the Cinema Mode field, select Film. 5 To save the new settings, highlight Done and
press . To revert to the factory defaults, highlight Reset and press .
To set the Cinema Mode to Video: Select Video in step 4 above.
Using the ClearFrameTM feature (only for G310U1)
The new ClearFrame 120 Hz anti-blur technology doubles the frame rate from 60 frames per second to 120 frames per second, virtually eliminating motion blur without adding flicker or reducing image brightness.
To turn on the ClearFrame:
1 Press and open the Picture menu, highlight
Picture Settings and press .
2 Highlight Advanced Picture Settings and press .
3 In the ClearFrame field, select On. 4 To save the new settings, highlight Done and
press . To revert to the factory defaults, highlight Reset
and press .
Note: ·· If you select one of the factory-set picture
modes (Sports, Standard, Movie or PC) and then change the ClearFrame setting, the picture mode automatically changes to Preference.
·· When ClearFrame is set to Off, the Film Stabilization feature will not be available (grayed out and set to Off).

Using the Film Stabilization feature (only for G310U1)

This feature helps to eliminate video shaking.
To turn on Film Stabilization:
1 Press and open the Picture menu, highlight
Picture Settings and press .
2 Highlight Advanced Picture Settings and press . 3 In the Film Stabilization field, select Smooth,
Standard or Off.
4 To save the new settings, highlight Done and press .
To revert to the factory defaults, highlight Reset
and press . Note: ·· If you select one of the factory-set picture
modes (Sports, Standard, Movie or PC) and then change the Film Stabilization setting, the picture mode automatically changes to Preference. ·· When ClearFrame is set to Off, Film Stabilization will be grayed out and set to Off automatically. ·· When slow motion video is present the units will treat any scrolling text as Film and may cause a slight jitter of the scrolling text. Tuning Off the Film Stabilization feature will correct this issue.
Using CableClear® digital noise reduction
The CableClear® digital noise reduction feature allows you to reduce visible interference in your TV picture. This may be useful when receiving a broadcast with a weak signal (especially a Cable channel) or playing a noisy video cassette or disc.

To change the CableClear settings:

1 Press and open the Picture menu, highlight

Noise Reduction and press .

2 In the CableClear field, select your desired setting.

Note:

·· If the current input is ANT/CABLE, VIDEO, the menu will display the text "CableClear."

The available selections are Off, Low,

Middle, and High.

·· If the current input is ColorStream HD, HDMI 1, HDMI 2 or HDMI 3 (only for

G310U1), the menu will display the

text "DNR." The available selections

are Off, Low, Middle, and High. Low,

Middle, and High will reduce the noise in

varying degrees, from lowest to highest,

respectively.

(continued)

Chapter 7: Using the TV's advanced features

3 To save the new settings, highlight Done and
press . To revert to the factory defaults, highlight Reset and press .
Using MPEG noise reduction
The MPEG noise reduction feature allows you to reduce visible interference caused by MPEG compression. Choices for MPEG noise reduction are Off, Low, Middle, and High. Off is automatically selected when this feature is disabled ("grayed out").
To select the MPEG noise reduction level:
1 Press and open the Picture menu. 2 Highlight Noise Reduction and press . 3 Press or to highlight the MPEG Noise
Reduction field, and then press or to select either Off, Low, Middle or High.
4 To save the new settings, highlight Done and
press . To revert to the factory defaults, highlight Reset and press .
Using the Game Mode feature
You can use the Game Mode feature for shorter frame delays when playing a video game requiring split-second timing between the on-screen display and input from the controller (such as music creation and high-action games). This feature is more effective for 480i and 1080i input signals.
Note: To use the Game Mode feature, the current video input must be Video, ColorStream HD, HDMI 1, HDMI 2 or HDMI 3 (only for G310U1). The Game Mode cannot be turned on when any other video input is selected.
To turn on Game Mode:
1 Press and open the Picture menu, then
highlight Game Mode.
2 Press or to select On.

To turn off Game Mode:
Select Off in Step 2 above, change the video input, or turn the TV off and then on again.
Note: You can change the video input by pressing on the remote control ( page 28).

Chapter 8: Troubleshooting

General troubleshooting
Before calling a service technician, please check this chapter for a possible solution to the problem experienced.
Black box on-screen
·· The closed caption feature is set to one of the Text modes (T1, T2, T3, or T4). Set the closed caption feature to Off ( page 36).
TV stops responding to controls
·· If the TV stops responding to the remote control or TV control panel and you cannot turn off the TV, please unplug the power cord for a few seconds then plug it back in and try again.
Other problems
·· If your TV's problem is not addressed in this Troubleshooting section or the recommended solution has not worked, use the Restore Factory Defaults procedure ( page 27).
TV will not turn on
·· Make sure the power cord is plugged in, and then press POWER / .
·· The remote control batteries may be dead. Replace the batteries or try the control panel buttons.
Picture problems
General picture problems ·· Check the antenna/cable connections ( Chapter
2).
·· Press on the remote control or TV and select a valid video input source ( page 28). If no device is connected to a particular input on the TV, no picture will display when you select that particular input source. For device connection details, see Chapter 2.
·· Antenna reception may be poor. Use a highly directional outdoor antenna (if applicable).
·· The station may have broadcast difficulties. Try another channel.
·· Adjust the picture qualities ( page 35).
Noisy picture ·· If you are watching an analog channel (off-
air broadcast or Cable TV), you can set the CableClear® feature to reduce visible interference in the TV picture ( page 51).

Video Input Selection problems ·· If the Input Selection window does not appear
when you press on the remote control or TV, press a second time. This will cause a change to the next video input source and display the Input Selection window.
Cannot view external signals or channel 3 or 4 ·· If you cannot view signals from external devices
connected to VIDEO, ColorStream® HDMI 1, HDMI 2, HDMI 3 (only for G310U1), PC or from channels 3 or 4, make sure the Input Lock is set to Off ( page 41).
Poor color or no color ·· The station may have broadcast difficulties. Try
another channel. ·· Adjust the Tint and/or Color ( page 35). Poor composite picture ·· If the TV is connected to an external A/V device
(e.g., DVD player, video game system, set-top box, etc.) try using a ColorStream or HDMI video connection instead.
Picture and sound are out of sync ·· As with all products that contain a digital display,
in rare instances, when viewing certain content (e.g., television broadcasts, video games, DVDs), you may notice that the sound and picture are slightly out of sync. This phenomenon can be caused by various factors including, without limitation, video processing within the TV, video processing in an attached gaming system, and video processing or different compression rates used by broadcasters in their programming. You may want to try one or more of the following suggestions, which may help to reduce the effect of this phenomenon:
If the TV is connected to an A/V receiver that
has a programmable audio delay feature, use this feature to help synchronize the sound to the picture.
If you notice this phenomenon only on
certain TV channels, please contact your local broadcast, cable, or satellite provider to inform them of this issue.
Scrolling text problem (only for G310U1) ·· When slow motion video is present the units will
treat any scrolling text as Film and may cause a slight jitter of the scrolling text. Turning Off the Film Stabilization feature will correct this issue.( page 51)
53

Chapter 8: Troubleshooting

Sound problems
·· Check the antenna/cable connections ( Chapter 2).
·· The station may have broadcast difficulties. Try another channel.
·· The sound may be muted. Press VOLUME. ·· If you hear no sound, try setting the MTS feature
to Stereo mode ( page 37). ·· If you are not receiving a second audio program
from a known SAP source, make sure the MTS feature is set to SAP mode ( page 37). ·· If you hear audio that seems "incorrect" for the program you are watching (such as music or a foreign language), the SAP mode may be on. Set the MTS feature to Stereo mode ( page 37).
Remote control problems
·· Remove all obstructions between the remote control and the TV.
·· The remote control batteries may be dead. Replace the batteries ( page 20).
·· If the TV still does not act as expected, use the Reset Factory Defaults procedure ( page 27).
Channel tuning problems
·· The channel may have been erased from the channel memory by the Programming channels automatically feature. Add the channel to the channel memory ( page 25).
·· The channel may be blocked by the LOCK feature. Unblock the channel ( page 41).
·· If you are unable to tune digital channels, check the antenna configuration ( page 24). If you are still unable to tune digital channels, clear all channels from the channel list and reprogram channels into the channel memory ( page 25). If you are still unable to tune digital channels, use the Reset Factory Defaults procedure ( page 27). Also see "TV stops responding to controls" and "Other problems" ( page 53).
Closed caption problems
·· If the program or video you selected is not closed-captioned, no captions will display ( page 35).
·· If text is not available, a black rectangle may appear. If this happens, turn off the closed caption feature ( page 35).
·· A closed-caption signal may not display correctly in the following situations: a) when a videotape has been dubbed; b) when the signal reception is weak; or c) when the signal reception is nonstandard ( page 35).

Rating blocking (V-Chip) problems
·· If you forget your PIN code: While the PIN code entering screen is displayed, press four times within 5 seconds. The PIN code you previously stored will be cleared ( page 38).

No REGZA-LINK® operation

·· The REGZA-LINK® feature is available for Toshiba REGZA-LINK® compatible devices.

·· Make sure the HDMI cables with the HDMI

Logo (

) are used.

·· When the connected REGZA-LINK® device

does not work correctly after you have changed

settings of the device, turn off your TV and

unplug the power cord, then plug and turn on

again.

·· If several devices are connected, REGZA-LINK®

feature may not operate properly.

·· Read the instruction manual furnished with the connected REGZA-LINK® device.

HDMI problems

For HDMI cables

·· Make sure to use cables with the HDMI Logo

(

) ( page 13).

For Legacy source ·· Some legacy HDMI sources may not work
properly with the latest HDMI TV products due
to new standard adoption.

Media Player problems
·· Make sure that devices are connected correctly. ·· Incorrect behavior may occur with a USB HUB
connection.
·· Photo files that were processed and edited by using the PC's application software may not be
able to be viewed.
·· The TV may select one format automatically and play it when contents that support two or more
formats are played.
·· Confirm contents of USB storage device are formats that correspond with this TV( page
43).

Chapter 9: Appendix

Specifications

Note:
·· These models comply with the specifications listed below.
·· Designs and specifications are subject to change without notice.
·· This model may not be compatible with features and/or specifications that may be added in the future.
Television System
NTSC standard
ATSC standard (8VSB)
Digital Cable (64 QAM, 256 QAM; in-the-clear,
unencrypted)

Channel Coverage VHF: 2 through 13 UHF: 14 through 69 Cable TV: Mid band (A-8 through A-1, A through I) Super band (J through W) Hyper band (AA through ZZ, AAA, BBB) Ultra band (65 through 94, 100 through 135)

Power Source

120 V AC, 60 Hz

Power Maximum Current 32C110U1: 1.6A 40E210U1: 1.7A 55G310U1: 3.1 A

Power Consumption 32C110U1/40E210U1/55G310U1: 0.6W in standby mode

Audio Power 32C110U1/40E210U1/55G310U1: 7 W + 7 W

Speaker Type 32C110U1/40E210U1: TWO 5-5/8 x 1 x 5/8 inches(142 x 25 x 16mm) 55G310U1: TWO 6 x 1-5/8 x 1-3/8 inches(152 x 40 x 34mm)

Video/Audio Terminals
VIDEO/AUDIO INPUT VIDEO: 1 V(p-p), 75 ohm, negative sync. AUDIO: 200 mV(rms) (-20dBFS,47K ohm or greater)
ColorStream® (component video) HD INPUT:

VIDEO:

Y: 1V(p-p), 75 ohm PR: 0.7 V(p-p), 75 ohm PB: 0.7 V(p-p), 75 ohm Suggested formats: 1080i, 720p, 480p, 480i

AUDIO: 200 mV(rms) (-20dBFS,47K ohm or greater)
HDMI® INPUT: HDMI compliant (type A connector) HDCP compliant Suggested formats: See table on the next page. HDMI Audio: 2-channel Linear-PCM; 32/44.1/48 kHz sampling frequency; 16/20/24 bits per sample
DIGITAL AUDIO OUTPUT: Optical type
PC INPUT: 15-Pin D-sub Analog RGB
Dimensions 32C110U1: Width: 2'7-1/4 inches (792.8mm) Height: 1'9-3/4 inches (551.7mm) Depth: 9'-5/8 inches (245mm) 40E210U1: Width: 3'2-3/4 inches (984.9mm) Height: 2'-2" inches (661.5mm) Depth: 11'-5/8 inches (295mm) 55G310U1: Width: 4'4-1/4 inches (1328mm) Height: 3'-1/4 inches (921.6mm) Depth: 1'4-7/8 inches (430mm)
Mass (Weight) 32C110U1: 20.9 lbs (9.5 kg) 40E210U1: 33.1 lbs (15 kg) 55G310U1: 73.9 lbs (33.5 kg)
Operating conditions Temperature: 32ºF - 95ºF (0ºC - 35ºC) Humidity: 20 - 80% (no moisture condensation)
Supplied Accessories · Remote control with two size "AAA" batteries · Easy Setup Guide · Four screws for holding the pedestal stand
55

Chapter 9: Appendix

Acceptable signal formats for PC IN and HDMI terminals

PC IN signal formats
Note: Depending on the connected PC, the following problems may occur; incorrect display, false format detection, picture position failure, blur, or judder. This is not a malfunction of your TV.

Format VGA SVGA XGA WXGA
SXGA

Resolution 640 × 480 800 × 600 1024 × 768 1280 × 768 1360 × 768 1280 × 1024

V. Frequency 59.940Hz 60.317Hz 60.004Hz 59.870Hz 60.015Hz 60.020Hz

H. Frequency 31.469kHz 37.879kHz 48.363kHz 47.776kHz 47.712kHz 63.981kHz

Pixel Clock Frequency 25.175MHz 40.000MHz 65.000MHz 79.500MHz 85.500MHz 108.000MHz (for E210U1 G310U1)

HDMI signal formats

Format VGA SVGA XGA WXGA
SXGA 480i 480p 720p 1080i 1080p 1080p

Resolution 640 × 480 800 × 600 1024 × 768 1280 × 768 1360 × 768 1280 × 1024 720 × 480i 720 × 480p 1280 × 720p 1920 × 1080i 1920 × 1080p 1920 × 1080p

V. Frequency 59.940Hz 60.317Hz 60.004Hz 59.870Hz 60.015Hz 60.020Hz 59.940Hz 59.940Hz 60.000Hz 60.000Hz 24.000Hz 60.000Hz

H. Frequency 31.469kHz 37.879kHz 48.363kHz 47.776kHz 47.712kHz 63.981kHz 15.734kHz 31.469kHz 45.000kHz 33.750kHz 27.000kHz 67.500kHz

Pixel Clock Frequency 25.175MHz 40.000MHz 65.000MHz 79.500MHz 85.500MHz 108.000MHz 27.000MHz 27.000MHz 74.250MHz 74.250MHz 74.250MHz 148.500MHz

· Some illustrations in this owner's manual are for explanation purposes and may differ from the actual unit. · Designs and specifications are subject to change without notice. · These models may not be compatible with features and/or specifications that may be added in the future.

Chapter 9: Appendix

Limited United States Warranty
for LCD Televisions
Toshiba America Information Systems, Inc. ("TAIS") makes the following limited warranties to original consumers in the United States.
THESE LIMITED WARRANTIES EXTEND TO THE ORIGINAL CONSUMER PURCHASER OR ANY PERSON RECEIVING THIS LCD TELEVISION AS A GIFT FROM THE ORIGINAL CONSUMER PURCHASER AND TO NO OTHER PURCHASER OR TRANSFEREE. LCD TELEVISIONS PURCHASED IN THE U.S.A. OR PUERTO RICO AND USED ANYWHERE OUTSIDE OF THE U.S.A. OR PUERTO RICO, INCLUDING, WITHOUT LIMITATION, CANADA AND MEXICO, ARE NOT COVERED BY THESE WARRANTIES. LCD TELEVISIONS PURCHASED ANYWHERE OUTSIDE OF THE U.S.A. OR PUERTO RICO, INCLUDING, WITHOUT LIMITATION, CANADA AND MEXICO, AND USED IN THE U.S.A., ARE NOT COVERED BY THESE WARRANTIES.
Limited One (1) Year Warranty on Parts and Labor
TAIS WARRANTS THIS LCD TELEVISION AND ITS PARTS AGAINST DEFECTS IN MATERIALS OR WORKMANSHIP FOR A PERIOD OF ONE (1) YEAR FROM THE DATE OF ORIGINAL RETAIL PURCHASE. DURING THIS PERIOD, TAIS WILL, AT TAIS' SOLE DESCRETION, REPAIR OR REPLACE A DEFECTIVE PART/ PRODUCT WITH A NEW OR REFURBISHED PART/PRODUCT WITHOUT CHARGE TO YOU FOR PARTS OR LABOR. ANY PART OR PRODUCT REPLACED UNDER THIS LIMITED WARRANTY BECOMES THE PROPERTY OF TAIS. IN SOME CASES, YOU MAY BE RESPONSIBLE FOR DELIVERING THE PRODUCT TO A SERVICE PROVIDER.
Rental Units
The limited warranty period begins on the date of the first rental or thirty (30) days after the date of shipment to the rental firm, whichever comes first.
Your Responsibility
Read the owner's manual thoroughly before installing or operating this LCD Television. Complete and mail the enclosed product registration card (if provided) or register your LCD Television online at http://register.toshiba.com. Registration of your LCD Television will enable TAIS to contact you in the unlikely event a safety notification is required under the U.S. Consumer Product Safety Act. Failure to complete and return the product registration card does not diminish your warranty rights.
THE ABOVE WARRANTIES ARE SUBJECT TO THE FOLLOWING CONDITIONS:
(1) This Limited Warranty is extended only to the original purchaser and only covers product purchased as new.
(2) A purchase receipt or other proof of the original purchase date is required for warranty service.

(3) All warranty servicing of this LCD Television must be performed by an Authorized TAIS Service Provider.
(4) The warranties from TAIS are effective only if this LCD Television is purchased and operated in the U.S.A. or Puerto Rico.
(5) Removal and reinstallation of product that is mounted in such a manner as to impede normal service is not covered under these warranties. This includes wall mounts, custom cabinets and other installation methods that do not provide for direct and immediate access to the product for service purposes. Labor service charges for set installation, setup, adjustment of customer controls, and installation or repair of antenna, satellite or cable systems are not covered by this limited warranty.
(6) Reception or other problems caused by inadequate antenna systems, misaligned satellite dishes, improperly installed cable drops or use with nonstandard signals, or sources are your responsibility and are not covered by this limited warranty.
(7) This limited warranty is void if the product is used outside the range of the temperature (heat/cold) and/or moisture operating conditions as outlined in the product's specification listed in the Owner's manual, or if the product is exposed to excessive smoke, dust, or other airborne contaminants or environmental conditions.
(8) Warranties extend only to defects in materials or workmanship as limited above, and do not extend to any LCD Television or parts that have been lost or discarded by you or to damage to the LCD Television or parts caused by fires, misuse, abuse, accident, Acts of God (such as lightning or fluctuations in electric power), improper installation, improper maintenance, or use in violation of instructions furnished by TAIS; use or malfunction through simultaneous use of this LCD Television and connected equipment; or to units that have been modified or had the serial number removed, altered, defaced, or rendered illegible.
(9) Product purchased "AS-IS" or "With known faults, defects or problems" are not covered by this limited warranty.
(10) Product previously owned or registered by a consumer and resold is not covered by this limited warranty.
(11) Product that is refurbished and resold is not covered under this limited warranty.
How to Obtain Warranty Service
After following all of the operating instructions in the Owner's manual, review the section entitled "Concierge" located on our Customer Support Web site at http://support.toshiba.com. If you find that service is needed, follow the instructions provided on the web site or please contact TAIS' Consumer Solution Center toll free at 1-800-631-3811. You must present upon request your original bill of sale or other proof of purchase including the serial number for in warranty service.
ALL WARRANTIES IMPLIED BY THE LAW OF ANY STATE OF THE U.S.A., INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY LIMITED TO THE DURATION OF THE LIMITED WARRANTIES SET FORTH ABOVE. WITH THE
57

Chapter 9: Appendix

EXCEPTION OF ANY WARRANTIES IMPLIED BY THE LAW OF ANY STATE OF THE U.S.A. AS HEREBY LIMITED, THE FOREGOING LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, GUARANTEES, AGREEMENTS, AND SIMILAR OBLIGATIONS OF TAIS WITH RESPECT TO THE REPAIR OR REPLACEMENT OF ANY PARTS. IN NO EVENT SHALL TAIS BE LIABLE FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, LOST PROFITS, BUSINESS INTERRUPTION, OR MODIFICATION OR ERASURE OF RECORDED DATA CAUSED BY USE, MISUSE OR INABILITY TO USE THIS LCD TELEVISION).
No person, agent, distributor, dealer, or company is authorized to change, modify or extend the terms of these warranties in any manner whatsoever. The time within which an action must be commenced to enforce any obligation of TAIS arising under this limited warranty or under any statute, or law of the United States or any state thereof, is hereby limited to ninety (90) days from the date you discover or should have discovered, the defect. This limitation does not apply to implied warranties arising under the law of any state of the U.S.A.
THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH MAY VARY FROM STATE TO STATE IN THE U.S.A. SOME STATES OF THE U.S.A. DO NOT ALLOW LIMITATIONS ON THE DURATION OF AN IMPLIED WARRANTY, WHEN AN ACTION MAY BE BROUGHT, OR THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES. THEREFORE, THE ABOVE PROVISIONS MAY NOT APPLY TO YOU UNDER SUCH CIRCUMSTANCES.
Limited Canadian Warranty for
Toshiba Brand Flat Panel Televisions
Toshiba of Canada Limited ("TCL") makes the following limited warranties to original consumers in Canada. THESE LIMITED WARRANTIES EXTEND TO THE ORIGINAL CONSUMER PURCHASER OR ANY PERSON RECEIVING THIS TOSHIBA BRAND FLAT PANEL TELEVISION (the "TELEVISION(S)" or "Television(s)") AS A GIFT FROM THE ORIGINAL CONSUMER PURCHASER AND TO NO OTHER PURCHASER OR TRANSFEREE.
TELEVISIONS PURCHASED IN CANADA, AND USED ANYWHERE OUTSIDE OF CANADA INCLUDING, WITHOUT LIMITATION, THE UNITED STATES AND MEXICO, ARE NOT COVERED BY THESE WARRANTIES.
TELEVISIONS PURCHASED ANYWHERE OUTSIDE OF CANADA, INCLUDING, WITHOUT LIMITATION, THE UNITED STATES AND MEXICO, AND USED IN CANADA, ARE NOT COVERED BY THESE WARRANTIES.
Limited One (1) Year Warranty on Parts and Labour
TCL warrants the Television and its parts against material defects in materials or workmanship that result in the Television failing for a period of one (1) year after the date of original retail purchase. DURING THIS PERIOD, TCL WILL, AT TCL'S OPTION, REPAIR OR REPLACE A DEFECTIVE PART WITH A NEW OR RECERTIFIED PART WITHOUT CHARGE TO YOU FOR PARTS OR LABOUR.
58

Rental Units
The warranty for Television rental units begins with the date of first rental or thirty (30) days from the date of shipment to the rental firm, whichever comes first.
Your Responsibility
Read the owner's manual thoroughly before operating this LCD Television. Complete and mail the enclosed product registration card or register your LCD Television online at http://support.toshiba.ca/warranty/. Registration of your LCD Television will enable TCL to contact you in the unlikely event of a product safety notice. Failure to complete the product registration does not diminish your warranty rights.
THE ABOVE WARRANTIES ARE SUBJECT TO THE FOLLOWING CONDITIONS:
(1) You must provide your bill of sale or other proof of purchase.
(2) All warranty servicing of this Television must be performed by a Toshiba Authorized Service Provider (ASP).
(3) The warranties from TCL are effective only if the Television is (i) purchased as new and unopened from TCL or from TCL's authorized distributors, dealers or resellers ("ADR's") and (ii) located/ operated in Canada.
(4) Removal and reinstallation of product that is mounted in such a manner as to impede normal service is not covered under these warranties. This includes wall mounts, custom cabinets and other installation methods that do not provide for direct and immediate access to the product for service purposes. Labour charges for set installation, setup, adjustment of customer controls, and installation or repair of antenna systems are not covered by these warranties. Reception problems caused by inadequate antenna systems are your responsibility.
(5) Warranties extend only to material defects in materials or workmanship as limited above, and do not extend to: a. Service, repairs or replacement made necessary by accident, misuse, abuse, moisture, liquids, dust, dirt, neglect, accident, damage, 24/7 applications, improper installation, improper operation, improper cleaning, improper maintenance, normal wear and tear, screen burn or image retention caused by prolonged display of static images and/or phosphor aging, or any other external cause or event, act or omission outside the control of TCL, including fire, theft, acts of God, alteration, power failures, power surges or power shortages, lightning, other electrical faults, or repairs, modifications or replacements by persons other than those authorized by TCL to service the Television; b. Replacement of missing, discarded or lost parts, the provision of retrofits, or preventive maintenance; c. Repair of damage that is cosmetic only or does not affect the Television functionality, such as wear and tear, scratches and dents; d. Service on Toshiba-branded accessory items (such accessory items may be covered by their own warranty); e. Service on third party products or service made necessary by use of incompatible third party products;

Chapter 9: Appendix

f. Service made necessary by the simultaneous use of this Television and connected equipment;
g. Modifications to the Television not approved in writing by TCL, and service made necessary by the use or installation of non-Toshiba modifications to the Television;
h. Service of a Television on which the TOSHIBA label or logo, rating label or serial number have been defaced or removed;
i. Damage to the Television caused by failure to follow the specifications, User manuals or guides as to usage and/or storage.
j. Firmware updates that are posted to the Toshiba Support website and can be performed by the end user via a USB stick or SD card type media.
Disclaimer and Limitation of Remedy
TO THE EXTENT NOT PRECLUDED BY LAW, ALL OTHER EXPRESS AND IMPLIED WARRANTIES, CONDITIONS AND REPRESENTATIONS FOR THIS TELEVISION, INCLUDING THE IMPLIED WARRANTIES, CONDITIONS AND REPRESENTATIONS OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY DISCLAIMED AND EXCLUDED. IF THE APPLICABLE LAW, STATUTORY OR OTHERWISE, PRECLUDES THE EXCLUSION OF ANY IMPLIED WARRANTIES, CONDITIONS AND REPRESENTATIONS THEN SUCH IMPLIED WARRANTIES, CONDITIONS AND REPRESENTATIONS ARE OTHERWISE LIMITED IN DURATION TO THE TERM OF THIS EXPRESS WRITTEN LIMITED WARRANTY. TO THE EXTENT NOT PRECLUDED BY LAW, STATUTORY OR OTHERWISE, THIS WRITTEN WARRANTY SUPERCEDES AND SPECIFICALLY DISCLAIMS ANY OTHER WARRANTY, CONDITION OR REPRESENTATION NOT STATED IN THIS WARRANTY, WHETHER MADE BY TCL, TOSHIBA CORPORATION, THEIR AFFILIATES, ADRs AND ASPs AND WHETHER MADE ORALLY OR IN WRITING (INCLUDING ANY STATEMENT IN ANY BROCHURE, PRESS RELEASE, ANNOUNCEMENT, ADVERTISEMENT, POINT OF SALE DISPLAY, ETC.).
YOU MUST READ AND FOLLOW ALL SET-UP AND USAGE INSTRUCTIONS IN THE APPLICABLE USER GUIDES AND/OR MANUALS. IF YOU FAIL TO DO SO, THIS TELEVISION MAY NOT FUNCTION PROPERLY AND MAY SUFFER DAMAGE. THIS WARRANTY WILL NOT COVER ANY SERVICE THAT IS REQUIRED, IN PART OR IN WHOLE, AS A RESULT OF ANY FAILURE TO FOLLOW THE SET-UP AND USAGE INSTRUCTIONS. THIS WARRANTY DOES NOT APPLY AND SHALL BE VOID AND UNENFORCEABLE IF THE TELEVISION IS OPENED, SERVICED, OR REPAIRED BY PERSONS OTHER THAN THOSE AUTHORIZED BY TCL TO SERVICE OR REPAIR THE TELEVISION.
IF THE TELEVISION FAILS TO WORK AS WARRANTED ABOVE, YOUR SOLE AND EXCLUSIVE REMEDY SHALL BE REPAIR OR REPLACEMENT OF THE DEFECTIVE PART. IN NO EVENT WILL TCL, TOSHIBA CORPORATION, THEIR AFFILIATES, ADRs OR ASPs (THE "RELATED PARTIES") BE LIABLE TO YOU OR ANY THIRD PARTY FOR ANY DAMAGES, MONEY, REIMBURSEMENT, COSTS OR EXPENSES. THIS LIMITATION APPLIES TO DAMAGES, MONEY, REIMBURSEMENT, COSTS OR EXPENSES OF ANY KIND WHATSOEVER INCLUDING ANY DIRECT OR INDIRECT DAMAGES, DAMAGE TO PROPERTY

OR PERSON, LOST PROFITS, LOST SAVINGS, INCONVENIENCE OR OTHER SPECIAL, INCIDENTAL, EXEMPLARY OR CONSEQUENTIAL DAMAGES, WHETHER FOR BREACH OF WARRANTY, BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE), UNDER A STATUTE OR UNDER ANY OTHER LAW OR FORM OR ACTION, OR WHETHER ARISING OUT OF THE USE OF OR INABILITY TO USE THE TELEVISION, EVEN IF ANY OF THE RELATED PARTIES HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR OF ANY CLAIM BY ANY OTHER PARTY.
No person, agent, distributor, dealer or company is authorized to change, modify or extend the terms of these warranties in any manner whatsoever.
Arbitration and Dispute Resolution
To the extent not precluded by law, any claim, dispute, controversy or disagreement (whether for breach of warranty, breach of contract, tort (including negligence), under a statute or under any other law or form of action) against any of the Related Parties arising out of, or otherwise relating to: (i) this warranty; (ii) the Television; (iii) any oral or written representations, statements, brochures, press releases, advertising, announcement, point of sale display, or promotional material relating to the Television; (iv) the relationships that result from this warranty, (the foregoing claims, disputes controversies and disagreements are collectively referred to as the "Dispute"), shall be referred to and resolved by final and binding arbitration (to the exclusion of the courts). To the extent not precluded by law, you agree to waive any right that you may have to commence or participate in any representative or class proceeding against the Related Parties relating to any Dispute. If and where applicable and to the extent not precluded by law, you further agree to opt out of any such representative or class proceedings. Arbitration of any Dispute will be conducted in the forum and in the manner as agreed to between you and TCL. Failing such agreement, the arbitration will be conducted by one arbitrator pursuant to the laws and rules relating to arbitration generally in force in the jurisdiction in which you reside at the time that the Dispute arises. To the extent not precluded by law, no claim, dispute, controversy or disagreement of any other person may be joined or combined with any Dispute by you, without the prior written consent of TCL.
Critical Applications
The Television you have purchased is not designed for any "critical applications." "Critical applications" means life support systems, medical applications, connections to implanted medical devices, commercial transportation, nuclear facilities or systems or any other applications where Television failure could lead to injury to persons or loss of life or catastrophic property damage.
IF THE CUSTOMER USES THE TELEVISION IN ANY CRITICAL APPLICATION, THE CUSTOMER AND NOT TCL, ITS AFFILIATES, ADRs OR ASPs ASSUME SOLE AND FULL RESPONSIBILITY FOR SUCH USE. TCL RESERVES THE RIGHT TO REFUSE TO SERVICE ANY TELEVISION USED IN A CRITICAL APPLICATION. TCL, ITS AFFILIATES, ADRs AND ASPs HEREBY DISCLAIM ANY AND ALL LIABILITY, DAMAGES AND CONSEQUENCES ARISING OUT OF THE SERVICE OR REFUSAL TO SERVICE SUCH TELEVISION AND FURTHER DISCLAIM ANY AND ALL LIABILITY, CONSEQUENCES AND DAMAGES THAT MAY ARISE OR RESULT FROM THE USE OF THE TELEVISION IN
ANY CRITICAL APPLICATIONS.
59

Chapter 9: Appendix
General Provisions If and to the extent that any provision of this limited warranty should generally be found to be unenforceable, the unenforceable provision shall be severed from the warranty and deemed not to form part of the warranty. The remaining provisions of this warranty shall be and remain valid and enforceable. If and to the extent that any provision of this limited warranty as it relates to any of the Related Parties is found to be invalid or unenforceable in respect of that party (the "Excluded Party"), the Excluded Party shall be deemed to be severed or excluded from the provision, and the provision shall remain valid, enforceable and applicable in respect of the other or remaining Related Parties. To the extent permitted by law, this limited warranty shall be governed and construed in accordance with the laws of Ontario. If there is any inconsistency between this limited warranty, on the one hand, and any statement in the packaging of the Television or in any other document enclosed with, or used in the context of the promotion or sale of, the Television, on the other hand, the provisions of this limited warranty shall prevail. How to Obtain Warranty Services If, after following all of the operating instructions in this manual, checked the "Troubleshooting" section, and have visited www.toshiba.ca/support for additional information, you find that service is needed, please contact TCL Customer Support toll free at 1 800 2683404.
Note
If you want to view the advanced functions available for your TV, you can do so by visiting following web page. For USA, support.toshiba.com For Canada, www.toshiba.ca/support
You may obtain the complete Corresponding GPL and LGPL Source code from Toshiba for a period of three (3) years after our last shipment of this product by contacting Toshiba Consumer Solutions at (800) 631-3811. There will be a charge of no more than the cost of physically performing source distribution of the GPL and LGPL code that we distributed to you in this product.
60

Note

TOSHIBA AMERICA INFORMATION SYSTEMS, INC.
Corporate Headquarters: 9740 IRVINE BLVD.; IRVINE, CA 92618 U.S.A. Visual Products Service and Support : 1420-B TOSHIBA DRIVE, LEBANON, TN 37087, U.S.A.
TOSHIBA OF CANADA LTD.
HEAD OFFICE: 191 McNABB STREET, MARKHAM, ONTARIO, L3R 8H2, CANADA
CableClear, ColorStream, GameTimer, and TheaterWide are registered trademarks of Toshiba America Information Systems, Inc. Channel Browser, DynaLight, ClearFrame, and SurfLock are trademarks of Toshiba America Information Systems, Inc. REGZA-LINK is a registered trademark of Toshiba Corporation.

Adobe InDesign CS4 (6.0.6) Adobe PDF Library 9.0