mailto:sales@winsensor.com
Winsen Gas Sensor_CO2 Sensor_Air Quality Sensor_Dust Sensor_CO Sensor-Winsen ElectronicsWinsen Gas Sensor_CO2 Sensor_Air Quality Sensor_Dust Sensor_CO Sensor-Winsen Electronics
User Manual for Winsen models including: ZP07-MP503 Air-Quality Detection Module, ZP07-MP503, Air-Quality Detection Module
ZP07-MP503 Air-Quality Detection Module--Winsen
File Info : application/pdf, 5 Pages, 356.55KB
DocumentDocumentAir-Quality Detection Module Air-Quality Detection Module ModelZP07-MP503 User's Manual Version:1.3 Valid from 2018.08.14 Zhengzhou Winsen Electronics Technology Co., Ltd Air-Quality Detection Module Statement This manual's copyright belongs to Zhengzhou Winsen Electronics Technology Co., LTD. Without the written permission, any part of this manual shall not be copied, translated, stored in database or retrieval system, also can't spread through electronic, copying, record ways. Thanks for purchasing our product. In order to let customers use it better and reduce the faults caused by misuse, please read the manual carefully and operate it correctly in accordance with the instructions. If users disobey the terms or remove, disassemble, change the components inside of the sensor, we shall not be responsible for the loss. The specific such as color, appearance, sizes &etc., please in kind prevail. We are devoting ourselves to products development and technical innovation, so we reserve the right to improve the products without notice. Please confirm it is the valid version before using this manual. At the same time, users' comments on optimized using way are welcome. Please keep the manual properly, in order to get help if you have questions during the usage in the future. Zhengzhou Winsen Electronics Technology CO., LTD. Air-Quality Detection Module ZP07 Air-Quality Detection Module Product Description ZP07 air-quality module adopts flat surface semiconductor gas sensor. The module has good sensitivity to volatile organic gases such as formaldehyde, benzene, carbon monoxide, ammonia, hydrogen, alcohol and smoke of cigarette, essence &etc. The module has good consistency and high sensitivity after aging, debugged, adjusted and calibrated. Features High sensitivity, excellent long-term stability Low power consumption, long life Calibrated before shipment 10 seconds to 3 minutes with auto-preheating function Faulty auto-check, High cost-effective Application Air cleaner, fresh-air system, intelligent integrated ceiling, air quality detector, ventilator, air-condition. Technical Index Model No. Detection Gas Physical Interface Output Data Working Voltage Output Data Working Current Warm-up Time Response Time Recovery Time Operating Temperature Operating Humidity Storage Temperature Storage Humidity Size Weight Sensitivity Attenuator Life Span Table 1 ZP07 formaldehyde, benzene, carbon monoxide, hydrogen, alcohol, ammonia, smoke of cigarette, essence &etc. XH2.54-4P terminal sockets 0-10 grade pollution signal 5.0±0.2V DC (No voltage reverse connect protection) TTL level (200ohm protected resistance inside) 60mA 3 min 20s 60s 050 95RH -2060 60RH 24×20×16mm(L×W×H) 20g 1%/year 5 years Picture 1:Module structure diagram(Dimension tolerance ±0.2mm) Sensitivity Characteristics Air-Quality Detection Module Picture 2: Contrast of the sensitivity in different gases Application of schematic diagram Picture 3: Module application diagram Pin definition Table2. Pin Name 1 GND Function Input power - 2 5V Input power + 3 A Output signal A Output signal B 4 B (reserved by factory) A Output Signal Table3. High ms Low ms Pollution Class 0 100 0 10 90 1 20 80 2 30 70 3 40 60 4 50 50 5 60 40 6 70 30 7 80 20 8 90 10 9 100 0 10 Air-Quality Detection Module Cautions Please do not put the module in organic solvent (include silica gel and other cementing compound), painting, medicament, oils and fuels, high concentration gas etc. Please do not impact or vibrate the module seriously. Please warm up for 5 min before first using. Please do not use the module related with personal safety. Please do not install the module in the severe convection environment. Please do not put in the module in high concentration organic gas for long time. Please power the module strictly according to the power supply voltage of the module. If the voltage exceeds 5.5V, the module will be irreversibly damaged. Zhengzhou Winsen Electronics Technology Co., Ltd Add: No.299, Jinsuo Road, National Hi-Tech Zone, Zhengzhou 450001 China Tel: +86-371-67169097/67169670 Fax: +86-371-60932988 E-mail: sales@winsensor.com Website: www.winsen-sensor.com