saltosystems.comsaltosystems.com/Products | Salto Systems
Owner's Manual for SALTO models including: E0102 A, E1215 A, E2131 A, E2131 A, E2131 A, E0127 B, XS4 Original E0102 Smart Lock, XS4 Original E0102, Smart Lock, Lock
Salto Systems S.L W60M UKCW60M UKCW60M w60m
Salto Systems S.L W40M UKCW40M UKCW40M w40m
File Info : application/pdf, 3 Pages, 331.34KB
DocumentDocumentCompliance
PRODUCTS DESCRIPTION
PRODUCT
COMMERCIAL NAME
M ODEL
XS4 Original E0102 (A)
XS4 Original with Keypad
E1215 (A)
XS4 Original+ E2131 (A)
XS4 One S E2131 (A)
XS4 One S KEYPAD E2131 (A)
XS4 Original i-Button
E0127 (B)
W09 W0J W0S W09W W0BW W0JW W08 W08W W0BK W0JK W0SK W0BWK W0JWK W40M W40T W40MH W80M W60M W60T W60MH W80M W40T W40MH W60M W60T W60MH
W61MK
W02
TECHNOLOGY
RFID 13.56 MHz Output max. Power
BLUETOOTH LE
24002483.5 MHz Output max. Power
IEEE802.15.4
24002483.5 MHz Output max. Power
CONTROL
+25 dBm +25 dBm +25 dBm +25 dBm +25 dBm +25 dBm +20 dBm +20 dBm +25 dBm +25 dBm +25 dBm +25 dBm +25 dBm
+25 dBm +25 dBm +25 dBm +25 dBm +25 dBm +25 dBm +25 dBm +25 dBm +25 dBm +25 dBm +25 dBm +25 dBm +25 dBm
+8 dBm +2.8 dBm
+8 dBm +8 dBm
+8 dBm +8 dBm +2.8 dBm +8 dBm +8 dBm +6 dBm +6 dBm +6 dBm +6 dBm +6 dBm +6 dBm +6 dBm +6 dBm +6 dBm +6 dBm +6 dBm +6 dBm +6 dBm
+5 dBm +5 dBm +5 dBm +5 dBm
+5 dBm +5 dBm
0037 0037 0126 0016/0061/0095 0016/0095 0016 0037 0016/0061 0016/0095 0016 126 0016/0095 0016
0174 0174 0174 0174 0174 0174 0174 0174 0174 0174 0174 0174 0174
+22 dBm
+6 dBm
0190
0023/0024/0025
READER
0132 0133 0132 0132 0132/0140 0133 0082 0082 0132 0133 0132 0132/0140 0133
SOFTWARE
Bluetooth LE M ODULE
RF2 M ODULE
M OTOR
0136 -
0136 0136
0136 0136
0136 0136
0038/0099 0038/0099
0038
0038
0038/0099 0038
0219 0219 0219 0219 0219 0219 0219 0219 0219 0219 0219 0219 0219
0202
SoC
FUS
Blue tooth LE
Stack
HSE
0186 0186 0186 0186 0186 0186 0186 0186 0186 0186 0186 0186 0186
0186
0187 0187 0187 0187 0187 0187 0187 0187 0187 0187 0187 0187 0187
0187
0197 0197 0197 0197 0197 0197 0197 0197 0197 0197 0197 0197 0197
0197
(A) EU DECLARATION OF CONFORMITY
EN Hereby, SALTO Systems S.L. (Arkotz Kalea (Pol. Lanbarren), 9 20180 Oiartzun Spain), declares that this access control equipment is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU (RED) and 2011/65/EU (RoHS). You will be able to find a copy of the original declaration of conformity at the following Internet address: https://www.saltosystems.com/certificate
ES Por medio de la presente SALTO Systems S.L. (Arkotz Kalea (Pol. Lanbarren), 9 20180 Oiartzun Spain) declara que este equipo de control de accesos cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 2014/53/UE (RED) y 2011/65/UE (RoHS). Podrá encontrar una copia de la declaración de conformidad original en la siguiente dirección de internet: https://www.saltosystems.com/certificate
FR Par la présente SALTO Systems S.L. (Arkotz Kalea (Pol. Lanbarren), 9 20180 Oiartzun Spain) déclare que l'appareil équipement pour le contrôle d'accès est conforme aux exigences essentielles et aux autres dispositions pertinentes de la directive 2014/53/UE (RED) et 2011/65/UE (RoHS). Vous pouvez télécharger une copie de la déclaration de conformité originale à travers l'adresse suivante: https://www.saltosystems.com/certificate
DE Hiermit erklärt SALTO Systems S.L. (Arkotz Kalea (Pol. Lanbarren), 9-20180 Oiartzun-Spain) dass sich das Gerät Zutrittskontrollgeräte im Übereinstimmung mit den grundlegendenAnforderungen und den übrigen einschlägigen Bestimmungen derRichtlinie 2014/53/EU (RED) befindet und 2011/65/EU (RoHS). Eine Kopie der originalen Konformitätserklärung finden Sie auf der folgenden Internetseite: https://www.saltosystems.com/certificate
NL Hierbij verklaart SALTO Systems S.L. (Arkotz Kalea (Pol. Lanbarren), 9 20180 Oiartzun Spain) dat het toestel toegangscontroleapparatuur in overeenstemming is met de essentiële eisen en de andere relevante bepalingen van richtlijn 2014/53/EU (RED) en 2011/65/EU (RoHS). U kunt een kopie van de originele verklaring van overeenstemming vinden op het volgende internetadres: https://www.saltosystems.com/certificate
PT A SALTO Systems S.L. declara que este equipamento de controlo de acessos está conforme os requisitos essenciais e outras disposições da Diretiva 2014/53/UE (RED) e 2011/65/UE (RoHS). Poderá encontrar uma cópia da declaração de conformidade original na seguinte direção de internet: https://www.saltosystems.com/certificate
(A) UKCA DECLARATION OF CONFORMITY
Hereby, SALTO Systems S.L. (Arkotz Kalea (Pol. Lanbarren), 9 20180 Oiartzun Spain), declares that this access control equipment is in compliance with the essential requirements and other relevant provisions of The Radio Equipment Regulations 2017 and RoHS Regulation 2012. You will be able to find a copy of the original declaration of conformity at the following Internet address: https://www.saltosystems.com/certificate
UK importer contact information:
SALTO SYSTEMS S.L. www.saltosystems.com Pol. Lanbarren, c/Arkotz nº9, 20180 Oiartzun, Spain.
1/3
226180-ED.7-xx/xx/2023
All contents current at time of publication. SALTO Systems S.L. reserves the right to change availability of any item in this catalog, its design, construction, and/or materials.
Compliance
Salto Systems, Ltd. Unit 1, The Court Holywell Business Park, Northfield Road, CV47 0FS Southam, UK.
(B) EU DECLARATION OF CONFORMITY
EN Hereby, SALTO Systems S.L. (Arkotz Kalea (Pol. Lanbarren), 9 20180 Oiartzun Spain), declares that this access control equipment is in compliance with the essential requirements and other relevant provisions of Directive 2014/30/EU (EMCD), 2014/35/EU (LVD) and 2011/65/EU (RoHS). You will be able to find a copy of the original declaration of conformity at the following Internet address: https://www.saltosystems.com/certificate
ES Por medio de la presente SALTO Systems S.L. (Arkotz Kalea (Pol. Lanbarren), 9 20180 Oiartzun Spain) declara que este equipo de control de accesos cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 2014/30/UE (EMCD), 2014/35/UE (LVD) y 2011/65/UE (RoHS). Podrá encontrar una copia de la declaración de conformidad original en la siguiente dirección de internet: https://www.saltosystems.com/certificate
FR Par la présente SALTO Systems S.L. (Arkotz Kalea (Pol. Lanbarren), 9 20180 Oiartzun Spain) déclare que l'appareil équipement pour le contrôle d'accès est conforme aux exigences essentielles et aux autres dispositions pertinentes de la directive 2014/30/UE (EMCD), 2014/35/UE (LVD) et 2011/65/UE (RoHS). Vous pouvez télécharger une copie de la déclaration de conformité originale à travers l'adresse suivante: https://www.saltosystems.com/certificate
DE Hiermit erklärt SALTO Systems S.L. (Arkotz Kalea (Pol. Lanbarren), 9-20180 Oiartzun-Spain) dass sich das Gerät Zutrittskontrollgeräte im Übereinstimmung mit den grundlegendenAnforderungen und den übrigen einschlägigen Bestimmungen derRichtlinie 2014/30/EU (EMCD), 2014/35/EU (LVD) befindet und 2011/65/EU (RoHS). Eine Kopie der originalen Konformitätserklärung finden Sie auf der folgenden Internetseite: https://www.saltosystems.com/certificate
NL Hierbij verklaart SALTO Systems S.L. (Arkotz Kalea (Pol. Lanbarren), 9 20180 Oiartzun Spain) dat het toestel toegangscontroleapparatuur in overeenstemming is met de essentiële eisen en de andere relevante bepalingen van richtlijn 2014/30/EU (EMCD), 2014/35/EU (LVD) en 2011/65/EU (RoHS). U kunt een kopie van de originele verklaring van overeenstemming vinden op het volgende internetadres: https://www.saltosystems.com/certificate
PT A SALTO Systems S.L. declara que este equipamento de controlo de acessos está conforme os requisitos essenciais e outras disposições da Diretiva 2014/30/UE (EMCD), 2014/35/UE (LVD) e 2011/65/UE (RoHS). Poderá encontrar uma cópia da declaração de conformidade original na seguinte direção de internet: https://www.saltosystems.com/certificate
(B) UKCA DECLARATION OF CONFORMITY
Hereby, SALTO Systems S.L. (Arkotz Kalea (Pol. Lanbarren), 9 20180 Oiartzun Spain), declares that this access control equipment is in compliance with the essential requirements and other relevant provisions of The Electromagnetic Compatibility Regulations 2016, The Electrical Equipment (Safety) Regulations 2016 and RoHS Regulation 2012. You will be able to find a copy of the original declaration of conformity at the following Internet address: https://www.saltosystems.com/certificate
UK importer contact information: Salto Systems, Ltd. Unit 1, The Court Holywell Business Park, Northfield Road, CV47 0FS Southam, UK.
ELECTRICAL WARNINGS
EN Caution:
- Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. - Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, can result in an explosion. - Leaving a battery in an extremely high temperature surrounding environment can result in an explosion or the leakage of flammable liquid or gas. - A battery subjected to extremely low air pressure may result in an explosion or the leakage of flammable liquid or gas.
Distance between this device and human body must be higher than 20 cm.
FR Attention:
- Risque d'explosion si la pile est remplacée par un type de pile inadéquat. Jetez les piles usagées conformément aux instructions. - La destruction d'une pile par le feu ou dans un four à haute température, le broyage ou encore son découpage mécanique peut entraîner une explosion. - Laisser une pile dans un environnement où la température est extrêmement élevée peut entraîner une explosion, une fuite de liquide ou de gaz inflammable. - Une pile soumise à une pression d'air extrêmement faible peut entraîner une explosion, ou la fuite d'un liquide ou d'un gaz inflammable.
La distance entre cet appareil et le corps humain doit être supérieure à 20 cm.
ES Atención:
- Peligro de explosión si la batería se reemplaza por un tipo incorrecto. Desechar las baterías usadas siguiendo las instrucciones. - Arrojar una batería al fuego o a un horno caliente, o aplastarla o cortarla mecánicamente, puede provocar una explosión. - Dejar una batería en un entorno de temperatura extremadamente alta puede provocar una explosión o la fuga del líquido o gas inflamable. - Una batería sometida a una presión de aire extremadamente baja puede provocar una explosión o una fuga del líquido o gas inflamable. La distancia entre este dispositivo y el cuerpo humano debe ser mayor de 20 cm.
Recommended batteries:
· Duracell Plus Power (AAA) LR03 MN2400 · Duracell Ultra Power (AAA) LR03 MX2400 · Varta Industrial (AAA) LR03 04003 · Varta High Energy (AAA) LR03 04903 · Varta Max Tech (AAA) LR03 MN2400
· Duracell Plus Power (AA) LR6 MN1500 · Duracell Ultra Power (AA) LR6 MX1500 · Varta Industrial (AA) LR6 04006 · Varta High Energy (AA) LR6 04906 · Varta Max Tech (AA) LR6 MN1500
MECHANICAL WARNINGS
In order to confirm the correct operation of this electronic device, SALTO recommends using it in combination with a lock destined for that use (door mass, frequency of use, fire door, etc.) and that is in good operational conditions. Polished finishes are strongly recommended in seaside environments for a better performance and durability. The environmental conditions mentioned in the data sheets are always referred to non-condensation situations. The Biocote and IA finishes are painted and sharp objects such as rings or metallic key rings or other metallic objects should be avoided during any cleaning process. The SALTO product should be treated with care during the installation process to avoid any aggressive contact that may damage the unit. It may be necessary to loosen the trims mounting during installation. Do not bring the device into contact with oil, paints or acids. Do not paint the door with the mortise lock or electronic device already mounted on the door. CLEANING THE ELECTRONIC DEVICE: a damp cloth with mild soapy water can be used. Never use abrasive soaps or sprays. The black chromium finish ("NE" code) is coated with a protective oil that improves the product conservation. Its
SALTO SYSTEMS S.L. www.saltosystems.com Pol. Lanbarren, c/Arkotz nº9, 20180 Oiartzun, Spain.
2/3
226180-ED.7-xx/xx/2023
All contents current at time of publication. SALTO Systems S.L. reserves the right to change availability of any item in this catalog, its design, construction, and/or materials.
Compliance
presence may increase the appearance of fingerprint traces after the needed product handling. Thus, no cleaning processes are applied at the origin to avoid removing the protective layer. SALTO recommends cleaning the product surfaces with a damp cloth after its manipulation when the installation is finished. For best performance, stainless steel should be cleaned regularly. Note that when the door is closed without the lock having been already programmed, the lock will automatically lock and can only be opened with a Portable Programing Device (PPD). If you have questions or doubts on this, please contact your authorized SALTO supplier.
LEGAL WARNINGS
The user shall be responsible for the correct use and maintenance of the access control equipment according to the instructions herein. SALTO shall not be responsible for any defect, malfunction, loss or damage, whether direct or indirect, caused by or arisen from any improper installation or utilization of the equipment or which contravenes, transgresses or infringes in any manner the above mentioned instructions. SALTO's liability concerning the equipment is limited to the warranty provided. The warranty does not cover product failures due to repairs, modifications or product manipulations performed in the access control equipment or in the inner electromechanical structure by anyone other than authorized SALTO dealers or personnel.
FCC COMPLIANCE STATEMENT [1]
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: · Reorient or relocate the receiving antenna. · Increase the separation between the equipment and receiver. · Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. · Consult the dealer or an experienced radio/TV technician for help. This product is a radio transmitter and receiver to be used in mobile conditions.
Supplier's Declaration of Conformity 47 CFR § 2.1077 Compliance Information We, SALTO Systems, S.L., hereby declare that the equipment bearing the model number specified above was tested conforming to the applicable FCC Rules. Responsible Party U.S. Contact Information Salto Systems Inc. USA. 1780 Corporate Drive, Suite 400. Norcross, GA. 30093. v.kourelos@saltosystems.com
ISED COMPLIANCE STATEMENT [2]
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. This device has been tested and found to comply with the limits for a Class B digital device, pursuant to ICES-003.
MIC COMPLIANCE STATEMENT [3]
FCC15 AZigbeeEMCVCCI A VCCIAFCC15 A RF2MODULEhttps://www.saltosystems.com/certificate
IMDA COMPLIANCE LABEL [4]
NCC WARNING STATEMENT / NCC [5]
Legend:
[1] FCC [2] ISED [3] MIC [4] IMDA
Remarks: Not applicable for models W08, W08W Not applicable for models W08, W08W Not applicable for models W08, W08W, W40M, W60M, W80M, W40T, W40MH, W60T, W60MH, W61MK, W02 Not applicable for models W08, W08W, W02, W40T, W40MH, W60T, W60MH
SALTO SYSTEMS S.L. www.saltosystems.com Pol. Lanbarren, c/Arkotz nº9, 20180 Oiartzun, Spain.
3/3
226180-ED.7-xx/xx/2023
All contents current at time of publication. SALTO Systems S.L. reserves the right to change availability of any item in this catalog, its design, construction, and/or materials.