Installation Guide for Hansshow models including: Model 3-Y 5.16-inch, 3 Y 5.16 Inch Mini Dash Screen, 3 Y 5.16 Inch Dash Screen, 5.16 Inch Dash Screen, Mini Dash Screen, Dash Screen, Mini Screen, Screen
Model 3/Y 5.16-inch Mini Dash Screen Installation Manual Note: 1.The installation instructions may differ slightly from the actual operation. If there are any differences,please follow the actual situation or contact us. 2.Warning: Please do not disassemble any part by yourself,any improper operation will not be covered by our warranty. Aftersale Contact: phone/whatsapp : +86 130 4421 9654 Email: support@hansshow.com installation tutorial video Working Hours (UTC+8): 9:00AM - 18:30PM (Monday to Sunday) Please leave a message at other times HANSSHOW plug : AMD version power plug-right door A pillar footwell plug : AMD CANBUS adapter cable-right door A pillar footwell plug : Display power plug plug : spare upgrade cable plug :Intel version power and CANBUS plug-computer Model 3/Y 5.16-inch Mini Dash Screen Installation Manual Intel Version 1. Slide the steering wheel to the bottom and then turn left to move the steering wheel to the the 2. Pry up the cover with a pry board HANSSHOW outermost position 4. Install the cover 3. Then pry the harness plug from the upper cover plate of the driver's footwell and pull the harness to the upper part according to the instructions in the picture and plug it into the screen harness wiring diagram Model 3/Y 5.16-inch Mini Dash Screen Installation Manual 5. Pull harness to the side of passenger's footwell 6. Remove the upper cover of the passenger's footwell HANSSHOW 8. Find the second gray plug of the host above the passenger's footwell and connect it to plug 7. Remove the side cover of the passenger's footwell Model 3/Y 5.16-inch Mini Dash Screen Installation Manual AMD Version 1. Slide the steering wheel to the bottom and then turn left to move the steering wheel to the the 2. Pry up the cover with a pry board HANSSHOW outermost position 4. Install the cover 3. Then pry the harness plug from the upper cover plate of the driver's footwell and pull the harness to the upper part according to the instructions in the picture and plug it into the screen / harness wiring diagram Model 3/Y 5.16-inch Mini Dash Screen Installation Manual 5. Pull harness / to the side of passenger's footwell 6. Remove the upper cover of the passenger's footwell HANSSHOW 7. Remove the side cover of the passenger's footwell 8. Connect the plug to the white plug under the A pillar of the front right seat Model Y Model 3 9. Connect the plug to the blue plug under the A pillar of the front right seatWPS 演示