ZTE MC888 5G Router Quick Start Guide

1. Prepare Your Device

• You need an activated Nano-SIM card.
• Login information is on the sticker on the underside of the device.

Description of SIM card image: Three types of SIM cards are shown: (U)SIM, micro-SIM, and nano-SIM.

Description of device sticker image: A label on the bottom of the device shows fields like S/N, ZTE, Model MC888, WIFI SSID, KEY, Device Manager Website, and Password.

2. Insert the Nano-SIM Card

Open the cover on the underside of the device and insert the Nano-SIM card.

Description of SIM insertion diagram: Shows opening a cover and inserting a SIM card with arrows indicating the process.

NOTE! The SIM card is already pre-installed in this device.

3. Power On the Device

Connect the power adapter to the device. The device will then turn on and automatically establish an internet connection.

Description of power connection diagram: Shows the power adapter connecting to the device and then to a wall socket.

4. Establish Internet Access

• WLAN: Retrieve the default SSID and default password from the sticker on the underside of the device. This allows you to connect your mobile device to the WLAN network and access the internet.

Description of WLAN connection diagram: Shows a smartphone connecting to a Wi-Fi network labeled "Wi-Fi" with a password field.

• Network Cable (RJ45): Using the LAN ports on the back of the device, you can establish a wired connection with your computer or other devices to access the internet.

Description of Ethernet connection diagram: Shows a computer connected via an Ethernet cable to the router's LAN port.

5. WLAN Information

• This router supports dual-band WLAN with 2.4GHz and 5GHz.
• While 2.4GHz WLAN offers longer range, 5GHz WLAN provides higher bandwidth.
• To use the router's 5GHz WLAN, your device must also support 5GHz WLAN.
• After a router restart, it takes 10 minutes for the 5GHz WLAN to become visible. The router must scan for existing frequencies (DFS) according to regulations and can only then release the higher 5GHz channels (from channel 52). You can shorten this time by manually assigning a 5GHz channel up to 48 (on the configuration page).
• To use the higher 5GHz channels (from channel 52), your device must also support DFS.

6. Change Device Settings

You can change the device settings by logging into the configuration website.

1. The default IP address of the configuration website and the password can be found on the sticker on the underside of the device.
2. Start the internet browser on a connected device and enter the IP address in the address bar.
3. Enter the password and click "Login".
4. After the configuration website opens, you can change the WLAN SSID, password, and other settings, among other things.

NOTES!

Please keep the sticker with the access data for future use. It is needed to put the device back into operation after a reset.

If you forget a changed password, you must reset your device to factory settings. To do this, find a small opening labeled RESET on the underside of the router, next to the SIM card slot. Use a pointed object to press it and hold the button for a few seconds.

If you need help on the configuration website, click the "?" symbol [Help Symbol]. Here you will find useful hints for each function.

Cable Broadband Mode.

Your device supports Cable Broadband Mode. You can use this service from your provider to access the internet.

1. Connect the LAN 1 port and the broadband service network port with a network cable.
2. Log in to the configuration website.
3. Change the operating mode to Cable Broadband Mode. To do this, you must first disconnect from the internet.
4. Set the detail parameters provided by your service provider.

Cable Broadband Mode (Alternative).

Alternatively, you can use Cable Broadband Mode in conjunction with mobile internet.

1. Connect the LAN 1 port and the broadband service network port with a network cable while a SIM card is inserted in the device.
2. Log in to the configuration website.
3. Change the operating mode to Automatic or Hybrid Mode. To do this, you must first disconnect from the internet. The device will then restart automatically.
   • a) Automatic: The wired network is used as the default network. If there is no connection via the wired network, you can access the internet using the Nano-SIM card.
   • b) Hybrid Mode: You can use two types of networks to access the internet simultaneously and thus increase network speed. If one of the two connections is disconnected, the other still functions properly.

Phone.

Your device supports the phone function. If you subscribe to this service from your provider, you can connect a phone to this device. To do this, connect the phone to the "Phone" port on the back of the device.

Description of phone connection diagram: Shows a phone connected to the router's 'Phone' port.

WPS.

The device supports the WPS function. This function allows establishing a connection between a client and the device.

1. Press the WPS button on the back of the device to activate the WPS function. The WLAN indicator will blink.
2. Activate the WPS function on the client.
3. Follow the system instructions on your client to establish the connection.

Indicator Lights and Ports.

Description of device front view: Shows LED indicators labeled SIGNAL, NETWORK, WLAN, POWER.

Description of device back view: Shows ports labeled WPS, PHONE, LAN, and power input.

Description of device bottom view: Shows SIM card slot and reset button opening.

• 1. SIGNAL (three LEDs): On: Three LEDs indicate signal strength. More LEDs mean a better signal. Off: No signal or no Nano-SIM card inserted.
• 2. NETWORK: Red: Device is on but not registered on the mobile network. Solid Blue: Device is registered or connected to the 3G/LTE mobile network. Solid White: Device is registered or connected to the 5G network.
• 3. WLAN: On: WLAN is functioning normally. Blinking: WPS is being activated. Off: WLAN is switched off.
• 4. POWER: On: Device is powered on. Off: Device is powered off.
• 5. WPS Button: Press this button to activate the WPS function.
• 6. PHONE (Telephone Connection): Connection for a telephone.
• 7. LAN Ports: Connection for WAN in Cable Broadband Mode or connection to a computer.
• 8. Power Connector: Connection for the power adapter.
• 9. Nano-SIM Card Slot & Reset Button Opening: Nano-SIM Card Slot: Insert the Nano-SIM card here. Reset Button Opening: Press and hold the button for a few seconds to reset your device to factory settings.

Troubleshooting.

Internet-Related Problems

WLAN Connection Problems

Telephony-Related Problems

Other Problems

Further Help.

To get help with your product:

• Send an email to mobile@zte.com.cn
• Visit https://www.ztedevices.com

Legal Information.

Copyright © 2022 ZTE CORPORATION. All rights reserved.

This user manual may not be quoted, reproduced, translated, or used in any form or by any means, electronic or mechanical, including photocopying and microfilming, without the prior written consent of ZTE Corporation.

Note: ZTE Corporation reserves the right to correct or update printing errors and technical changes in this manual without prior notice.

Disclaimer: Images and screenshots used in this manual may differ from the actual product. Content in this manual may differ from the actual product or software.

Registered Trademarks: ZTE and the ZTE logos are registered trademarks of ZTE Corporation. Other registered trademarks and trade names are the property of their respective owners.

Version No.: R1.0

Warning and Notice.

Safety Precautions

• Some electronic devices are susceptible to electromagnetic interference. Place the device as far away as possible from televisions, radios, and other electronic devices to avoid electromagnetic interference.
• The device may interfere with the function of medical devices such as hearing aids or pacemakers. Consult a doctor or the manufacturer of your medical device before using the device.
• Please maintain a distance of at least 20 cm from your device.
• Do not use your device in hazardous environments such as oil depots or chemical factories where explosive gases or explosive products are processed.
• Use only original accessories or accessories authorized by ZTE. Unauthorized accessories may impair the device's performance, damage the device, or put you in danger.

Do not attempt to disassemble the device. It contains no user-serviceable parts.

Never expose the device and accessories to liquids or moisture. Do not immerse the device in liquids.

Do not place objects on the device. The device may overheat.

The device requires adequate ventilation.

Do not expose the device to direct sunlight or store it in hot locations. High temperatures can shorten the lifespan of electronic devices.

Do not allow children to play with the device or power adapter.

The device is intended for indoor use only. Do not use the device outdoors.

Accessories with plug connections should be located near the power outlet and be easily accessible during operation.

Cleaning and Maintenance:

• Use an anti-static cloth to clean the device. Do not use chemical or abrasive cleaning agents, as they may damage the plastic housing. Turn off your device before cleaning it.

Operating Temperature and Humidity:

• Use the device within the temperature range of -20 °C to +55 °C; the storage temperature range is between -40 °C and +70 °C. Humidity: 5% to 95%.
• Do not use your device during a thunderstorm. Unplug the power adapter from the socket.

Limited Warranty:

This warranty does not cover defects or malfunctions caused by the following:

1. i. Normal wear and tear.
2. ii. Failure by the end-user to comply with the installation, operation, and maintenance instructions provided by ZTE.
3. iii. Improper handling, improper use, negligence, or improper installation, disassembly, maintenance, or faulty operation of the product by the end-user.
4. iv. Modifications or repairs not performed by ZTE or ZTE-certified personnel.
5. v. Power outages, voltage surges, fires, floods, accidents, and acts of third parties or other events beyond ZTE's control.
6. vi. Use of third-party products or use of the product in combination with third-party products, if the occurring errors are attributable to such use.
7. vii. Any other source of error attributable to the use of the product for unintended purposes.

Under the circumstances described above, end-users are not entitled to reject, return, or receive a refund for a ZTE product.

This warranty constitutes the sole remedy for end-users and ZTE's sole liability for defective or malfunctioning products. It replaces all other express, implied, or statutory warranties, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose, unless otherwise provided by law.

Limitation of Liability.

ZTE shall not be liable for any loss of profits or indirect, special, incidental, or consequential damages arising from or in connection with the use of this product, regardless of whether ZTE was informed of the possibility of such damages, knew of them, or should have known of them, including, but not limited to, lost profits, business interruption, capital costs, costs incurred through replacement services or products, and costs based on operational failures.

Radio Frequency Exposure.

This device complies with CE requirements for radiation exposure in an uncontrolled environment. This device must be installed and operated with a minimum distance of 20 cm between the radiation source and persons.

Technical Specifications.

This radio equipment uses the following frequency bands and maximum radio frequency energy.

NOTE: The performance of all ZTE products complies with the specified limits of the European Union. The frequency ranges supported by the product are model-dependent.

• UMTS Band 1/8: 23 dBm
• LTE Band 1/3/7/8/20/28/38: 23 dBm
• 5G n1/3/7/28/75/78: 23 dBm
• 802.11 a/b/g/n/ac/ax: 2.4 GHz Band <20 dBm
• 5 GHz Band <20 dBm

CE Warning (Proper Use): As described in this manual, your device can only be used in suitable locations. Do not touch the antenna area of your device if possible.

Disposal of Old Equipment.

1. Products marked with the symbol of a crossed-out waste bin [Symbol for Disposal] comply with the European Directive 2012/19/EU.
2. All electrical and electronic products must be disposed of separately from household waste. They must be handed in at the collection points provided by the respective municipality.
3. Proper disposal of old equipment helps prevent negative consequences for the environment and health.

For WEEE Directive-based recycling information for this product, please send an email to weee@zte.com.cn.

EU DECLARATION OF CONFORMITY.

CE

ZTE Corporation hereby declares that the radio equipment type MC888 complies with the provisions of Directive 2014/53/EU.

The full text of the EU Declaration of Conformity is available at the following internet address: https://certification.ztedevices.com

This device is restricted to indoor use in the frequency range between 5150 and 5350 MHz.

Compliance with Directive 2009/125/EC

The product fulfills the requirements of Directive 2009/125/EC and complies with REGULATION (EC) No. 1275/2008 and (EU) No. 801/2013 OF THE COMMISSION. Further information can be found at https://certification.ztedevices.com

ZTE CORPORATION

NR. 55, Hi-tech Road South, Shenzhen, VR China

Postal Code: 518057