MSI Gaming Mouse M18/M18D

Overview

• 1. Left Button
• 2. Right Button
• 3. Scroll Wheel
• 4. Forward Button
• 5. Backward Button
• 6. DPI Button
• 7. LED Switch Button
• 8. Bluetooth Pairing Button
• 9. Slider Switch: 2.4G Mode / Off / Bluetooth Mode
• 10. Wireless USB Dongle

6-Level DPI Presets

Higher DPI is recommended for monitors with higher resolution. Cycle through different DPI levels by pressing the button repeatedly. The Scroll Wheel LED color will indicate the current DPI Level.

• 400 Green
• 800 Blue
• 1600 Red (default)
• 2500 Yellow
• 3200 Cyan
• 5000 Purple

Diagram Description: The document displays two diagrams of the MSI Gaming Mouse. The first diagram shows the top view of the mouse with numbered buttons: 1. Left Button, 2. Right Button, 3. Scroll Wheel, 4. Forward Button, 5. Backward Button. The second diagram shows the bottom view of the mouse with numbered features: 6. DPI Button, 7. LED Switch Button, 8. Bluetooth Pairing Button, 9. Slider Switch (2.4G Mode / Off / Bluetooth Mode), and 10. Wireless USB Dongle.

Connectivity and Compliance

FCC Compliance

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Industry Canada Compliance

This device complies with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device.

EU Declaration of Conformity

Hereby, Verico International Co., Ltd declares that the radio equipment type M18 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: https://www.msi.com

Battery Information

Warning: Risk of explosion if the battery is replaced by an incorrect type. This product contains a built-in battery that needs to be removed by a specialist before product disposal. Keep the battery away from excessive heat and direct sunlight. Do not place it on heating devices. Battery may explode if overheated.

Disposal: Dispose of used batteries according to the instructions. Recommended: Return, recycle, or treat them in compliance with local regulations.

Radio Frequency Information

Maximum output of the operating band: Mouse: BT LE: 2402~2480 MHz: 1 dBm; 2.4G SRD: 2405-2470 MHz: -23.32 dBm. Dongle: 2.4G SRD: 2405-2470 MHz: 1 dBm.

WEEE Statements

European Union: This symbol on the product indicates that this product cannot be discarded as municipal waste. It is your responsibility to dispose of your waste electrical and electronic equipment by handing it over to a designated collection point for recycling. For more information, contact your local city office, household waste disposal service, or the shop where you purchased the product.

Recycling Information:

• FR: Cet appareil et ses cordons se recyclent. À déposer en magasin ou en déchèterie. Points de collecte sur www.quefairedemesdechets.fr. Privilégiez la réparation ou le don de votre appareil!
• Paper Recycling Symbol: ?
• Battery Recycling Symbol: ? (Please recycle used batteries according to instructions)

Pairing and Operation

2.4G Wireless Pairing

1. Plug in the Wireless USB Dongle. If the mouse is unresponsive, click any mouse button to wake it from sleep.
2. Set the Slider Switch to 2.4G Mode at the bottom of the mouse.
3. Within 5 seconds, press the Left, Center, and Right Mouse Buttons simultaneously. The Scroll Wheel LED will blink Yellow when the mouse is ready to pair.

Bluetooth Pairing

1. Set the Slider Switch to Bluetooth Mode at the bottom of the mouse.
2. Within 3 seconds, press the Bluetooth Pairing Button at the bottom of the mouse. The Scroll Wheel LED will blink Blue when the mouse is ready to pair.
3. Activate the Bluetooth function on your device and select "MSI M18" from the list of devices.

Wired Mouse Mode and Battery Charging

When the USB cable is plugged into the mouse's USB-C port, it will automatically switch to wired mouse mode. For charging, it is recommended to switch off the mouse. The Scroll Wheel LED will blink Red while charging and remain solid Red when fully charged.

RGB Lighting and Power Saving Mode

Cycle through RGB lighting effects and power saving modes using the LED Button. Options include all RGB lights on, scroll wheel only, or dark mode. The mouse automatically turns off lights after 65 seconds of inactivity and enters sleep mode after 10 minutes.

Low Battery Indicator

The Scroll Wheel LED will blink Red rapidly when the battery is low in 2.4G or Bluetooth mode.

Troubleshooting

• Ensure the Power Switch is set to 2.4G or BLE mode.
• Restart your device and attempt to pair the mouse again.
• Turn the mouse off and then back on to 2.4G or BLE. If the LED status lights do not blink briefly, charge the mouse.
• Before re-pairing Bluetooth, remove "M18" from your device's connected devices list. Press and hold the BT Pairing button until "M18" reappears in the Bluetooth device list, then connect.
• Remove any metal objects between the USB dongle and the mouse that might interfere with reception.

RoHS Compliance

BSMI RoHS

This table indicates the content of restricted substances in the product. 'O' indicates that the content of the restricted substance is below the reference percentage value. '-' indicates that the restricted substance is an exemption.

CHINA RoHS

This table indicates the name and content of harmful substances in the product. 'O' indicates that the content of the harmful substance is below the limit requirement. 'X' indicates that the content of the harmful substance exceeds the limit requirement.

*Circuit Board Assembly includes printed circuit board and its components.

Manufacturer Information:

Supplier: Micro-Star International Co., Ltd.

Address: No. 69, Lide St., Zhonghe Dist., New Taipei City, Taiwan

Phone: +886-2-32345599

Manufacturer: Guan Zhao International Co., Ltd.

Address: 12F-6, No. 872, Zhongzheng Rd., Zhonghe Dist., New Taipei City, Taiwan