BLUETTI AC200 Portable Power Station User Manual

Safety Instructions

Please observe the following instructions to ensure safe usage:

1. Do not alter or disassemble this product.
2. Do not move during charging or using it, as vibration and impact can lead to poor contact of the output interface.
3. In case of fire, use dry powder fire extinguishers. Do not use water fire extinguishers, which may cause electric shock.
4. Close supervision is required when using this product near children.
5. Confirm the rated specification of your load and do not use it beyond the specification.
6. Do not place the product near heat sources, such as electric furnaces and heaters.
7. Not permitted on aircraft because the battery capacity exceeds 100Wh.
8. Do not touch the product or plug-in points with wet hands.
9. Check the product and accessories prior to every use. Do not use if damaged or broken.
10. Please unplug the AC adapter from the wall outlet immediately in case of lightning strike, which may cause heating, fire, or other accidents.
11. Use original charger and cables.

1. Packing List

The following items are included in the package:

Note: Items marked with ✔ are standard accessories included. Items marked with ✔ in the option column are not included and must be purchased separately from the seller.

The pictures are for reference only; the actual object is standard.

2. Function Introduction

The BLUETTI AC200 features various ports and controls:

• 1. Power button: Turns the unit on/off.
• 2. 12V / 10A cigarette lighter port: For DC appliances.
• 3. Type-C charging port: For charging compatible devices.
• 4. Touchable interaction LCD display: Main interface for monitoring and control.
• 5. USB output x 4pcs: Standard USB-A ports for charging devices.
• 6. US AC output x 6pcs (EU/UK AC output x 2 pcs): AC outlets for powering appliances.
• 7. 12V / 25A output: High-power DC output.
• 8. 12V / 3A output: Standard DC output.
• 9. PV / car input port: For connecting solar panels or car chargers.
• 10. AC adapter input port: For charging via AC adapter.
• 11. Wireless charging x 2pcs: Qi-compatible wireless charging pads.

Notes:

• AC stands for Alternating Current.
• DC stands for Direct Current.
• PV stands for Photovoltaic (solar charging).
• Car stands for automobile electric energy.

3. Startup and Shutdown Operation

Startup: Short press the power button. The indicator light will turn on, and the machine will be in standby mode.

Shutdown: Press and hold the power button for more than 2 seconds. The indicator light will turn off, and the machine will shut down.

The LED Indicator Lamp Status Warning

DC power switch and AC power switch are integrated into the interaction LCD screen. Press the "DC ON/OFF" button and "AC ON/OFF" button on the screen to turn the DC/AC output on or off.

4. How to Use the Touch Screen

The Interaction LCD screen (Information Vision) supports the following functions:

1. Real-time display of voltage, current, power, temperature, and state of charge and discharge.
2. Adjustable settings for output voltage, frequency, charging mode, power consumption mode, and time information via the setting column.
3. Support for energy-saving, including Super ECO mode to save over 30% of energy loss.
4. Access to fault information, historical fault information, and software version.

Operation Steps of Touch Screen

Warm tip: The touchable LCD screen is resistance-based. It is recommended to press the touch button lightly with a fingernail until it "beeps". To maximize the lifespan of the LCD screen, please avoid direct sunlight on it.

When the power button is pressed, the main interface of the LCD display screen is shown (Figure 1):

Figure 1: Main Interface

The interface includes:

• a. Homepage button: Returns to the main screen.
• b. Settings button: Accesses system settings.
• c. Data button: Opens data and information menus.
• d. Faults button: Displays fault information.
• e. PV/Car charging display button: Shows PV or car charging status.
• f. BMS information display button: Displays Battery Management System information.
• g. Date/Time: Shows current date and time.
• h. DC load information display button: Shows DC output status.
• i. DC ON/OFF button: Controls DC output.
• j. AC ON/OFF button: Controls AC output.
• k. Adapter charging display button: Shows AC adapter charging status.
• l. AC load information display button: Shows AC output status.

Click the Settings button to enter the setting interface (Figure 2):

Figure 2: Settings Interface

Warm tip: Please set the date and time according to your local time zone and check the output voltage, frequency, and other parameters for the first time.

Default Settings:

• JP output: 100V/50Hz
• US output: 120V/60Hz
• EU output: 230V/50Hz
• UK output: 230V/50Hz
• DC Input Source: PV (solar)
• ECO Mode: NO

Press the "Next" button to enter the language and date setting screen (Figure 3):

Figure 3: Language and Date Setting

Language: Japanese, English

Date and time: Please set the "Date and time" at least once every 2 weeks.

Data and Faults

Return to the main interface (Figure 1) and click the "Data" button to enter the page (Figure 4):

Figure 4: Data Menu

• Click the "Product Info" button to view the product model, control software version, monitoring software version, BMS monitoring software version, and display software version.
• Click the "Inverter & Charger Info" button to view the PV / Car operation, adapter operation status, DC out operation, and AC out operation. This information can also be accessed directly from the shortcut keys on the main interface.
• Click the "BMS Maintenance" button to view the operation information of the BMS. This section is also accessible via a shortcut key on the main interface.
• Click the "Fault History" button to view all fault information generated by the machine. All fault codes are recorded here. Fault History is retained for up to 10 years if not manually cleared.

Return to the main interface and click the fault button (Figure 1) to view current fault information. The fault button will display orange if there is a fault. Click it to enter the corresponding fault information; the gray light will then turn into orange.

6. Charging the Product

There are five ways to charge the product:

1. Charging mode 1: From AC Wall Outlet
   Connect the product to the AC wall outlet and press the main power button to start charging. The charging will automatically stop when it reaches 100%.
2. Charging mode 2: From the Solar Panels
   Choose a solar panel with a working voltage of DC 35V-150V. Connect the solar panel to the product using the included solar charging cable. Charging is plug-and-play; it will start automatically after connecting the solar panel, even if the unit is off. The maximum current from the solar panel is 12A.
3. Charging mode 3: From the Car Lighter Port
   Press the power button and connect to the cigarette lighter port using the car charging cable. Enter the setting interface via the display screen to set the DC input source to "car mode". The product can be charged with a maximum current of 8.2A.
4. Charging Mode 4: From a Generator (gasoline, propane, or diesel)
   Connect the AC adapter input to the generator and the output port to the AC charging port of the machine. Press the power button; the product will be charged and will automatically stop when it reaches 100%.
5. Charging mode 5: From a Lead Acid Battery
   Connect to the positive and negative poles of the battery using the provided solar charging cable. Pay attention to distinguish the positive (red head) and negative (black head) poles. Enter the setting interface via the display screen to set the DC input source to "car mode". The product can be used for car charging mode with a maximum current of 8.2A. The product has an anti-over-discharge function for lead-acid batteries.

7. Discharging

To discharge the product:

1. 12V / 25A, 12V / 3A, Cigarette Lighter, USB, and Type-C Output: First, press the power button, then navigate to the main interface through the touch screen. Click the "DC ON/OFF" button and confirm. To turn off these outputs, click the "DC ON/OFF" button again and confirm.
2. AC Output: First, press the power button, then navigate to the main interface through the touch screen. Click the "AC ON/OFF" button and confirm. To turn off these AC output ports, click the "AC ON/OFF" button again and confirm.

8. Application Scenario

• Outdoor:
• Car equipment: car fridge, car vacuum cleaner, and other car accessories.
• Camping equipment: garden electric tools (e.g., blowers, lawn mowers, electric drills, electric saws), BBQ grills, LED lights, etc.
• Indoor:
• Refrigerator, kitchen devices (e.g., kettle, toaster, blender, coffee maker, rice cooker), laptops, phones, lighting, etc.

9. Examples of Loads

The 12V/25A, 12V/3A, cigarette lighter port, USB, and Type-C output ports are suitable for most products on the market. However, some products may trigger overcurrent protection if they have a large current impact at the moment of starting.

The power of electrical products used for AC output should be less than 2000W. For different electrical products, even if the rated power is less than 2000W, some air conditioners, motors, and other devices that require high instantaneous current during startup may trigger overcurrent if the ratio of peak value to rated current exceeds 3:1. In such cases, it is recommended to select electrical appliances with a lower power rate.

If the output is overloaded, over-current, or short-circuited, the product will turn off the corresponding output and attempt to restart twice (at 20-second intervals). If an overload, over-current, or short-circuit alarm persists, the output will be locked and requires manual troubleshooting before restarting. If the output stops repeatedly after restarting, please stop using it immediately (after troubleshooting) or contact the seller or a maintenance agent.

When the battery power is discharged to 0%, both DC and AC outputs will automatically turn off. The DC and AC outputs can only be turned on again when the battery power is charged to more than 5%, which helps protect the battery and enhance its cycle life.

This machine supports charging and discharging simultaneously.

10. Estimation of Operating Time

The estimated operating times for various devices are as follows:

• Smartphone (10WH): 7-8 hours
• LED lamp (20WH): 75-85 hours
• TV 35inch (75WH): 20-22 hours
• Electric Tool (80WH): 19-20 hours
• Fridge (90WH): 17-19 hours
• Electric Cooker (200WH): 8-9 hours

The formula for calculating charging time is: 2000Wh × DOD × η ÷ (load W) = charging time (unit: h)

Note: DOD is the battery discharge depth, and η is the inverter efficiency. For this product, DOD=90% and η=88%.

11. Specification

Output Specifications

Input Specifications

Remarks:

1. PV charging has an automatic activation charging function (plug and play). When PV is connected, the device will automatically activate for charging as long as the sun has energy. If you do not want this function, please unplug the PV charging head after full charge.
2. It supports charging while discharging and does not support UPS function.

Battery Pack

Product

12. Storage and Maintenance Instructions

1. Please fully charge the machine before storing it.
2. Turn off all power buttons.
3. To preserve battery lifespan, use and recharge at least once every 6 months.
4. Ensure proper ventilation while in use or storage, and keep away from any combustible materials or gases. Do not stack anything on top of the unit. Inadequate ventilation and/or improper storing may cause damage.
5. Avoid exposing the product to rain or using it in a humid environment.
6. Use and store the product in a clean and dry environment.
7. Keep this product away from children and pets.
8. Wring a cloth with water and wipe it clean if it gets dirty.

13. Declaration

• Some changes may be made to the appearance and specifications without prior notice due to product improvement.
• The company shall not be liable for any damage caused by force majeure (fire, typhoon, flood, earthquake), user's intentional negligence, misuse, or other abnormal conditions.
• No compensation shall be made for failures of non-standard connectors/accessories.
• The company will not bear responsibility if damage is caused by not operating the product according to the operation manual.
• This product is not suitable for use on equipment or machines involving personal safety, such as atomic energy devices, aerospace devices, transportation devices, medical devices, etc., or equipment that must be highly reliable in electricity. Using the product in such applications means the company is not responsible for personal accidents, fire accidents, or wrong actions of the machine and equipment caused by product failure.

14. Common Faults and Troubleshooting

If this product is unable to charge or power other equipment, please check the following steps:

1. Ensure that the power button is on and its indicator light is always on (green).
2. Make sure the DC ON / OFF button and AC ON / OFF button are on.
3. Check if the battery capacity is more than 5%. If the battery capacity is less than 5%, please charge as soon as possible.
4. Ensure that the load equipment meets the power limit of the product, meaning the load power is within the maximum input range of each output interface.

If the above steps do not resolve the problem, please contact the seller for assistance.

15. FAQ (Frequently Asked Questions)

• What is the depth of discharge (DoD)?
  To extend battery life, the portable power station has a DoD setting of 90%, meaning only 90% of the battery capacity can be discharged. This reserves 10% of the energy to avoid damage due to over-discharge.
• Can it be charged and discharged at the same time?
  Yes, it supports pass-through charging for both AC and DC loads. It is recommended to fully charge the AC200 at least once per month to extend battery life if performing simultaneous charging and discharging.
• Can AC output charge a refrigerator, air conditioner, or electric drill?
  Lower power devices can be charged. It is not recommended to use devices exceeding 1400W. The starting power of refrigerators, air conditioners, and electric drills is generally 5-7 times their nominal power, which can easily trigger AC overload.
• Can two products be used in parallel?
  No.
• Can I use third-party solar panels?
  Yes, you can use any solar panels as long as they have MC4 connectors and, when wired together, the voltage is between 35V to 150V and the total power does not exceed 700W.
• How do I know if my appliance will work with the product?
  To determine appliance compatibility, calculate the continuous loads of each appliance you want to run simultaneously to ensure the total wattage is within the generator's capacity. You can find the wattage of an appliance on its manufacturer's information plate (usually stamped or printed on the appliance). Add all wattages of appliances to be run to determine if the total amount of watts is within the maximum continuous and surge watts.
• Can I connect the product to my home circuit breaker box?
  No, you cannot connect it to your home circuit breaker box.