Pulsar 510 Jetpack 2.0 Forced Air Vape Instruction Manual

Specifications

Size: 3.9 x 1.67 x 0.8" (99.3 x 42.3 x 20.4 mm)
Max Cart Size: 0.47 x 2.28" (12 x 58 mm)
Battery Capacity: 650 mAh
Voltage: 1.8 / 2.4 / 2.8 / 3.4 / 3.8 V (1.8 V Pre-heat)
Charging: USB-C

Kit Includes

1x Pulsar 510 Jetpack 2.0 Battery

Charging

Ensure the device is powered off and the cartridge is removed prior to charging. Charge the battery fully before first use. For the best charging experience, use a USB-C cable and a standard wall charging brick. The LED light ring will indicate charging status: red for charging, green for fully charged. To prolong battery life, do not leave plugged in for more than 2 hours and do not use a car charger.

Powering On

Remove the charger from the device and press the power button 5 times to turn the device on.

Installing Cartridge

Remove the bottom magnetic connector and attach a pre-filled 510-threaded cartridge (do not overtighten). Reattaching the connector to the device will show the current battery level via the LED light ring: Green (75%+), Blue (35% - 75%), Red (Below 35%).

Change Voltage Settings

With the device turned on, press the power button once to change the voltage setting. The voltage settings and their corresponding LED colors are: 1.8 V - Yellow, 2.4 V - Purple, 2.8 V - Green, 3.4 V - Blue, 3.8 V - Red.

Auto Vape

Once your voltage setting is selected, press the power button quickly twice to activate auto vape. The LED ring will light up and cycle through colors. The auto vape function lasts 15 seconds and can be stopped by pressing the power button once.

Manual Vape

This device features an autodraw function. Place your lips on the mouthpiece and pull to activate. The LED ring will show the selected voltage during use. There is a 10-second vape timer. If you pull for 10 consecutive seconds, the battery will stop powering the cartridge, and the light ring will flash red 3 times.

Powering Off

To fully turn off the device, press the power button 5 times. The device will enter sleep mode automatically with no input after 10 seconds.

Cleaning

Remove the magnetic connector and unscrew the cartridge. Use a cotton swab with 91% alcohol to clean any residue from the 510 connection and the air pathway. Work your way up and down the air pathway until no more oil is visible. Repeat for the inside of the flip-top mouthpiece.

Warnings

Do not expose to extreme temperatures or direct sunlight. Do not drop the device or accessories. Do not drop or submerge in any liquid. Do not modify the electronics. This device is intended for adults only. Do not sell or provide to minors. Keep all parts, concentrates, herbs, and liquids away from children and pets. This is not a medical device and is not intended to diagnose, treat, mitigate, cure, or prevent any ailment, disease, or other condition. Consult a physician before use, especially if you have heart disease, other medical conditions, or are pregnant or breastfeeding. Failure to follow these instructions could result in product damage, property damage, personal injury, and may void the warranty. Visit PulsarShop.com for warranty information.

	Pulsar 510 DL 5.0 Cartridge Vape Instruction Manual Comprehensive instruction manual for the Pulsar 510 DL 5.0 cartridge vape, covering specifications, kit contents, power on/off, cartridge insertion, pre-heating, voltage settings, charging, and cleaning instructions.
	Pulsar 510 DL Centro Instruction Manual & User Guide Detailed instructions and specifications for the Pulsar 510 DL Centro variable voltage vape pen. Learn about operation, charging, cleaning, and safety warnings.
	Pulsar 510 DL 5.0 Cartridge Vape Instruction Manual Instruction manual for the Pulsar 510 DL 5.0 Cartridge Vape, covering specifications, kit contents, operation, charging, cleaning, and warnings.
	Pulsar 510 DL Auto-Draw Variable Voltage Vape Pen User Manual User guide for the Pulsar 510 DL auto-draw variable voltage vape pen, detailing specifications, operation, charging, cleaning, and safety guidelines for optimal use.
	Pulsar 510 DL 2.0 Auto-Draw Variable Voltage Vape Pen Manual User manual for the Pulsar 510 DL 2.0 Auto-Draw Variable Voltage Vape Pen, including specifications, quick start instructions, operating instructions, and cleaning guidelines.
	Pulsar 510 DL 2.0 PRO Auto-Draw Variable Voltage Vape Bar Manual Official user manual for the Pulsar 510 DL 2.0 PRO Auto-Draw Variable Voltage Vape Bar. This guide provides detailed specifications, quick start instructions, operating procedures, cleaning advice, and essential safety warnings for the 1000mAh USB-C rechargeable device.
	Pulsar 510 DL 3.0 Twist Variable Voltage Vape Pen User Manual User manual for the Pulsar 510 DL 3.0 Twist Variable Voltage Vape Pen, detailing specifications, quick start guide, instructions, cleaning, and safety warnings.
	Pulsar Duplo Cart H2O Thick Oil Vape Manual and Specifications A comprehensive guide to the Pulsar Duplo Cart H2O, a dual cartridge thick oil vaporizer featuring 4-setting variable voltage, auto-draw, and a removable mouthpiece. Includes charging instructions, operation guide, cleaning tips, and technical specifications.