Home - FPG | Food Display Solutions
Contact Us - FPG | Food Display Solutions
Owner's Manual for FPGWORD models including: IN-5H08-CU-OF-FS, 5000 Series FPG Food Display Solutions, 5000 Series, FPG Food Display Solutions, Display Solutions, Solutions
5000 Series - FPG | Food Display Solutions
Inline 5000 Series - FPG | Food Display Solutions
File Info : application/pdf, 2 Pages, 354.15KB
DocumentDocument5000 SERIES 800 CURVED/OPEN FRONT HEATED RANGE TEMPERATURE MODEL FRONT INSTALLATION HEIGHT WIDTH DEPTH INLINE 5000 SERIES HEATED IN-5H08-CU-OF-FS CURVED/OPEN FRONT FREESTANDING 1443mm 807mm 789mm FEATURES High energy efficiency: 1.4 kWh per hour (average) Cabinet operating temperature range +65°C - +85°C Recommended core product temperature +65°C +80°C · Smart open front display with double-glazed glass encased in brushed stainless steel frame TEMPERATURE RANGE RECOMMENDED CORE PRODUCT TEMPERATURE ENVIRONMENTAL TEST CONDITIONS +65°C +85°C +65°C +80°C 22°C / 65% RH Open Front Heated Display Four full-width display levels: three fixed IWave quartz infrared shelves and heated base Each IWave shelf is brushed stainless steel and is fitted with ticket strips front and rear: 30mm (height), with caution decal applied. Each shelf is supplied with 1x 730mm width removable aluminium drip tray 25,000 hour LED lighting system at 2758 lumens per metre in cabinet top and to each shelf Operational Excellence Sliding doors (staff side) and open front (customer side) FPG IWave heating technology uses low-wattage quartz infrared elements complemented with a heating coil in the base for even temperature distribution and extended shelf life Fitted with an electronic controller for energy efficiency Safer for consumers - display surfaces are maintained < +65°C and the internal air temperature is lower than in many fan-assisted cabinets No noise pollution this cabinet runs silently Constructed from stainless and mild steel with fully double-glazed, toughened safety glass for maximum energy efficiency and durability · Designed to be installed into joinery · Fitted with adjustable 150mm legs (+30mm adjustment) Showing : Inline 5000 Series heated 800mm curved freestanding open front OPTIONS & ACCESSORIES Contact a FPG Sales Representative for our full range, including: · Drip trays: Colour and woodprint options available · Stainless steel product trays with three sides · Stainless steel pie chutes · Branded decals · Rear door or end glass mirror application · Adjustable 100mm legs (+25mm adjustment), lockable castors or unidirectional rollers · External stainless steel chassis surround · Rear deck assemblies · Custom joinery solution Indicates sustainability benefits Please contact FPG to discuss your requirements for meeting country-specific standards. FPGWORLD.COM 5000 SERIES 800 CURVED/OPEN FRONT HEATED HEATED DATA MODEL IN-5H08-CU-OF-FS TEMPERATURE RANGE +65°C +85°C RECOMMENDED CORE PRODUCT TEMPERATURE +65°C +80°C ENVIRONMENTAL TEST CONDITIONS 22°C / 65% RH IWAVE HEATING Low-wattage infrared quartz elements ELECTRICAL DATA MODEL VOLTAGE PHASE CURRENT E24H (kWh) IN-5H08-CU-OF-FS 220-240 V Single 8.7 A 33.6 1Please advise country to change plug specification. CAPACITY, ACCESS & CONSTRUCTION kWh per hour (average) 1.4 IP RATING MAINS CONNECTION CONNECTION PLUG1 IP 22 3 metre, 3 core cable 10 amp, 3 pin plug LED LIGHTING HOURS LUMENS COLOUR 25,000 2758 per metre Natural MODEL IN-5H08-CU-OF-FS DISPLAY AREA 1.1 m2 LEVELS 3 Shelves + Base ACCESS FRONT Open front ACCESS REAR Sliding doors CHASSIS CONSTRUCTION Stainless 304 and mild steel DIMENSIONS MODEL H x W x D mm (Uncrated) MASS (Uncrated) IN-5H08-CU-OF-FS 1443 x 807 x 789 145 kg Crated weights and dimensions vary. Please contact us for information on your shipment. Installation note; Model cutout dimensions: IN-5H08-CU-OF-FS models require 760 x 725mm benchtop cutout. Joinery height 603mm (see product manual for installation guide). 789 O/A APPLIANCE 603 JOINERY HEIGHT 145 118 118 122 PLAN VIEW 807 O/A APPLIANCE 730 SHELF WIDTH 670 BASE WIDTH 247 332 417 563 840 1443 (+30) O/A APPLIANCE 453 150 (+30) ALLOW CUT OUT 760 FRONT ELEVATION ALLOW CUT OUT 725 SECTION VIEW 148 CABLE EXIT BASE CABLE LENGTH 3m REAR ELEVATION More information including technical data and installation guidelines is available from the Product Manual published on our website. In line with our policy to continually develop, improve and support our products, Future Products Group Ltd reserves the right to change specifications and design without notice. Have a question? Please email us at sales@fpgworld.com or visit www.fpgworld.com for full contact details for your region. 01/25 © 2025 Future Products Group Limited Worldwide contact details: FPGWORLD.COM