ONYX INTERNATIONAL INC. GO6 E Ink Tablet, ePaper Tablet, Digital Paper, E reader, Paper tablet, eBook reader XR3-GO6 XR3GO6 go6
Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao`an District, Shenzhen, China FCC PART 15 SUBPART C TEST REPORT FCC PART 15.247 Report Reference No. .................... : FCC ID. ........................................... : Compiled by ( position+printed name+signature) . : CTA24050900403 XR3-GO6 File administrators Jinghua Xiao Supervised by ( position+printed name+signature) . : Project Engineer Lushan Kong Approved by ( position+printed name+signature) . : RF Manager Eric Wang Date of issue .................................... : May. 13, 2024 Testing Laboratory Name.............. : Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Address ........................................... : Fuhai Street, Bao`an District, Shenzhen, China Applicant's name ........................... : Onyx International Inc. Room 101, Building 4, No. 202 Shiyu Road, Nansha District, Address ............................................ : Guangzhou City, Guangdong Province, China Test specification ........................... : Standard........................................... : FCC Part 15.247 TRF Originator ................................. : Shenzhen CTA Testing Technology Co., Ltd. Shenzhen CTA Testing Technology Co., Ltd. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen CTA Testing Technology Co., Ltd. is acknowledged as copyright owner and source of the material. Shenzhen CTA Testing Technology Co., Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. Test item description ..................... : E Ink Tablet, ePaper Tablet, Digital Paper, E reader, Paper tablet, eBook reader Trade Mark ....................................... : BOOX Manufacturer .................................... : Onyx International Inc. Model/Type reference ...................... : Go 6 Listed Models .................................. : Refer to page 2 Modulation Type............................... : CCK/DSSS/OFDM Operation Frequency ....................... : From 2412 - 2462MHz Rating ............................................... : DC 3.8V From battery and DC 5.0V From external circuit Result ............................................... : PASS Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao'an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:cta@cta-test.cn Web:http://www.cta-test.cn Report No.: CTA24050900403 TEST REPORT Page 2 of 37 Equipment under Test : E Ink Tablet, ePaper Tablet, Digital Paper, E reader, Paper tablet, eBook reader Model /Type : Go 6 Series Model No. BOOX Go 6, BOOX Go 6 Plus, BOOX Go 6 Pro, BOOX Go 6 Lite, BOOX Go Color 6, BOOX Go Color 6 Plus, BOOX Go Color 6 Pro Applicant : Onyx International Inc. Address : Room 101, Building 4, No. 202 Shiyu Road, Nansha District, Guangzhou City, Guangdong Province, China Manufacturer : Onyx International Inc. Address : Room 101, Building 4, No. 202 Shiyu Road, Nansha District, Guangzhou City, Guangdong Province, China Test Result: PASS The test report merely corresponds to the test sample. It is not permitted to copy extracts of these test result without the written permission of the test laboratory. Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao'an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:cta@cta-test.cn Web:http://www.cta-test.cn Report No.: CTA24050900403 Page 3 of 37 Contents 1 TEST STANDARDS ................................................................. 4 2 SUMMARY ............................................................................ 5 2.1 General Remarks 5 2.2 Product Description 5 2.3 Equipment Under Test 6 2.4 Short description of the Equipment under Test (EUT) 6 2.5 EUT operation mode 6 2.6 Block Diagram of Test Setup 6 2.7 Related Submittal(s) / Grant (s) 6 2.8 Modifications 6 3 TEST ENVIRONMENT .............................................................. 7 3.1 Address of the test laboratory 7 3.2 Test Facility 7 3.3 Environmental conditions 7 3.4 Test Description 8 3.5 Statement of the measurement uncertainty 8 3.6 Equipments Used during the Test 9 4 TEST CONDITIONS AND RESULTS........................................... 11 4.1 AC Power Conducted Emission 11 4.2 Radiated Emission 14 4.3 Maximum Peak Conducted Output Power 20 4.4 Power Spectral Density 21 4.5 6dB Bandwidth 24 4.6 Out-of-band Emissions 27 4.7 Antenna Requirement 36 5 TEST SETUP PHOTOS OF THE EUT ......................................... 37 6 PHOTOS OF THE EUT ........................................................... 37 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao'an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:cta@cta-test.cn Web:http://www.cta-test.cn Report No.: CTA24050900403 Page 4 of 37 1 TEST STANDARDS The tests were performed according to following standards: FCC Rules Part 15.247: Frequency Hopping, Direct Spread Spectrum and Hybrid Systems that are in operation within the bands of 902-928 MHz, 2400-2483.5 MHz, and 5725-5850 MHz. ANSI C63.10-2013: American National Standard for Testing Unlicensed Wireless Devices KDB558074 D01 v05r02: Guidance for Compliance Measurements on Digital Transmission Systems (DTS) ,Frequency Hopping Spread Spectrum System(HFSS), and Hybrid System Devices Operating Under §15.247 of The FCC rules. Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao'an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:cta@cta-test.cn Web:http://www.cta-test.cn Report No.: CTA24050900403 Page 5 of 37 2 SUMMARY 2.1 General Remarks Date of receipt of test sample Testing commenced on Testing concluded on : May. 06, 2024 : May. 06, 2024 : May. 13, 2024 2.2 Product Description Product Name: E Ink Tablet, ePaper Tablet, Digital Paper, E reader, Paper tablet, eBook reader Model/Type reference: Go 6 Power supply: DC 3.8V From battery and DC 5.0V From external circuit Adapter information (Auxiliary test supplied by test Lab) : testing sample ID Hardware version: Model: EP-TA20CBC Input: AC 100-240V 50/60H Output: DC 5V 2A CTA240509004-1# (Engineer sample) CTA240509004-2# (Normal sample) V1.0 Software version: V1.0 WIFI : Supported type: 802.11b/802.11g/802.11n(H20)/ 802.11n(H40) Modulation: Operation frequency: Channel number: Channel separation: 802.11b: DSSS 802.11g/802.11n(H20)/ 802.11n(H40): OFDM 802.11b/802.11g/802.11n(H20): 2412MHz~2462MHz 802.11n(H40): 2422MHz~2452MHz 802.11b/802.11g/802.11n(H20): 11 802.11n(H40):7 5MHz Antenna type: PIFA antenna Antenna gain: 2.50 dBi Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao'an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:cta@cta-test.cn Web:http://www.cta-test.cn Report No.: CTA24050900403 Page 6 of 37 2.3 Equipment Under Test Power supply system utilised Power supply voltage : 230V / 50 Hz 120V / 60Hz 12 V DC 24 V DC Other (specified in blank below) DC 3.8V From battery and DC 5.0V From external circuit 2.4 Short description of the Equipment under Test (EUT) This is an E Ink Tablet, ePaper Tablet, Digital Paper, E reader, Paper tablet, eBook reader. For more details, refer to the user's manual of the EUT. 2.5 EUT operation mode The application provider specific test software(AT command) to control sample in continuous TX and RX (Duty Cycle >98%) for testing meet KDB558074 test requirement. IEEE 802.11b/g/n: Thirteen channels are provided to the EUT. Channel Frequency(MHz) Channel Frequency(MHz) 1 2412 8 2447 2 2417 9 2452 3 2422 10 2457 4 2427 11 2462 5 2432 6 2437 7 2442 2.6 Block Diagram of Test Setup EUT DC 5.0V from adapter 2.7 Related Submittal(s) / Grant (s) This submittal(s) (test report) is intended for filing to comply with Section 15.247 of the FCC Part 15, Subpart C Rules. 2.8 Modifications No modifications were implemented to meet testing criteria. Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao'an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:cta@cta-test.cn Web:http://www.cta-test.cn Report No.: CTA24050900403 Page 7 of 37 3 TEST ENVIRONMENT 3.1 Address of the test laboratory Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao`an District, Shenzhen, China 3.2 Test Facility The test facility is recognized, certified, or accredited by the following organizations: FCC-Registration No.: 517856 Designation Number: CN1318 Shenzhen CTA Testing Technology Co., Ltd. has been listed on the US Federal Communications Commission list of test facilities recognized to perform electromagnetic emissions measurements. A2LA-Lab Cert. No.: 6534.01 Shenzhen CTA Testing Technology Co., Ltd. has been listed by American Association for Laboratory Accreditation to perform electromagnetic emission measurement. ISED#: 27890 CAB identifier: CN0127 Shenzhen CTA Testing Technology Co., Ltd. has been listed by Innovation, Science and Economic Development Canada to perform electromagnetic emission measurement. The 3m-Semi anechoic test site fulfils CISPR 16-1-4 according to ANSI C63.10 and CISPR 16-1-4:2010. 3.3 Environmental conditions During the measurement the environmental conditions were within the listed ranges: Radiated Emission: Temperature: 25 °C Humidity: 45 % Atmospheric pressure: 950-1050mbar Conducted testing Temperature: 25 °C Humidity: 44 % Atmospheric pressure: 950-1050mbar AC Power Conducted Emission Temperature: 24 °C Humidity: 44 % Atmospheric pressure: 950-1050mbar Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao'an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:cta@cta-test.cn Web:http://www.cta-test.cn Report No.: CTA24050900403 Page 8 of 37 3.4 Test Description FCC PART 15.247 FCC Part 15.207 FCC Part 15.247(a)(2) FCC Part 15.247(d) FCC Part 15.247(b) FCC Part 15.247(e) FCC Part 15.109/ 15.205/ 15.209 FCC Part 15.247(d) FCC Part 15.203/15.247 (b) AC Power Conducted Emission 6dB Bandwidth Spurious RF Conducted Emission Maximum Peak Conducted Output Power Power Spectral Density Radiated Emissions Band Edge Antenna Requirement PASS PASS PASS PASS PASS PASS PASS PASS Data Rate Used: Preliminary tests were performed in different data rate to find the worst radiated emission. The data rate shown in the table below is the worst-case rate with respect to the specific test item. Investigation has been done on all the possible configurations for searching the worst cases. The following table is a list of the test modes shown in this test report. Test Items Mode Data Rate Channel Maximum Peak Conducted Output Power Power Spectral Density 6dB Bandwidth Spurious RF conducted emission Radiated Emission 9KHz~1GHz& Radiated Emission 1GHz~10th Harmonic 11b/DSSS 11g/OFDM 11n(20MHz)/OFDM 11n(40MHz)/OFDM 1 Mbps 6 Mbps 6.5Mbps 13.5Mbps 1/6/11 1/6/11 1/6/11 3/6/9 11b/DSSS 1 Mbps 1/11 Band Edge 11g/OFDM 11n(20MHz)/OFDM 11n(40MHz)/OFDM 6 Mbps 1/11 6.5Mbps 1/11 13.5Mbps 3/9 3.5 Statement of the measurement uncertainty The data and results referenced in this document are true and accurate. The reader is cautioned that there may be errors within the calibration limits of the equipment and facilities. The measurement uncertainty was calculated for all measurements listed in this test report acc. to TR-100028-01" Electromagnetic compatibility and Radio spectrum Matters (ERM);Uncertainties in the measurement of mobile radio equipment characteristics; Part 1" and TR-100028-02 "Electromagnetic compatibility and Radio spectrum Matters (ERM);Uncertainties in the measurement of mobile radio equipment characteristics; Part 2 " and is documented in the Shenzhen CTA Testing Technology Co., Ltd. quality system acc. to DIN EN ISO/IEC 17025. Furthermore, component and process variability of devices similar to that tested may result in additional deviation. The manufacturer has the sole responsibility of continued compliance of the device. Hereafter the best measurement capability for Shenzhen CTA Testing Technology Co., Ltd. : Radiated Emission 9KHz~30MHz 3.02 dB (1) Radiated Emission 30~1000MHz 4.06 dB (1) Radiated Emission 1~18GHz 5.14 dB (1) Radiated Emission 18-40GHz 5.38 dB (1) Conducted Disturbance 0.15~30MHz 2.14 dB (1) Output Peak power 30MHz~18GHz 0.55 dB (1) Power spectral density / 0.57 dB (1) Spectrum bandwidth / 1.1% (1) Radiated spurious emission (30MHz-1GHz) 30~1000MHz 4.10 dB (1) Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao'an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:cta@cta-test.cn Web:http://www.cta-test.cn Report No.: CTA24050900403 Page 9 of 37 Radiated spurious emission (1GHz-18GHz) 1~18GHz 4.32 dB (1) Radiated spurious emission (18GHz-40GHz) 18-40GHz 5.54 dB (1) (1)This uncertainty represents an expanded uncertainty expressed at approximately the 95% confidence level using a coverage factor of k=2. 3.6 Equipments Used during the Test Test Equipment Manufacturer LISN R&S LISN R&S EMI Test Receiver R&S EMI Test Receiver R&S Spectrum Analyzer Agilent Spectrum Analyzer Vector Signal generator Analog Signal Generator WIDEBAND RADIO COMMUNICATION TESTER Temperature and humidity meter Ultra-Broadband Antenna Horn Antenna Loop Antenna Horn Antenna Amplifier R&S Agilent R&S CMW500 Chigo Schwarzbeck Schwarzbeck Zhinan Beijing Hangwei Dayang Schwarzbeck Amplifier Taiwan chengyi Directional coupler NARDA High-Pass Filter XingBo High-Pass Filter Automated filter bank Power Sensor XingBo Tonscend Agilent Amplifier Schwarzbeck Model No. ENV216 ENV216 ESPI ESCI N9020A FSP N5182A SML03 R&S ZG-7020 VULB9163 BBHA 9120D ZN30900C OBH100400 BBV 9745 EMC051845B 4226-10 XBLBQ-GTA18 XBLBQ-GTA27 JS0806-F U2021XA BBV9719 Equipment No. CTA-308 CTA-314 CTA-307 CTA-306 CTA-301 CTA-337 CTA-305 CTA-304 Calibration Date 2023/08/02 Calibration Due Date 2024/08/01 2023/08/02 2024/08/01 2023/08/02 2024/08/01 2023/08/02 2024/08/01 2023/08/02 2024/08/01 2023/08/02 2024/08/01 2023/08/02 2024/08/01 2023/08/02 2024/08/01 CTA-302 2023/08/02 2024/08/01 CTA-326 CTA-310 CTA-309 CTA-311 CTA-336 CTA-312 CTA-313 CTA-303 CTA-402 CTA-403 CTA-404 CTA-405 CTA-406 2023/08/02 2024/08/01 2023/10/17 2023/10/13 2023/10/17 2021/08/07 2024/10/16 2024/10/12 2024/10/16 2024/08/06 2023/08/02 2024/08/01 2023/08/02 2024/08/01 2023/08/02 2024/08/01 2023/08/02 2024/08/01 2023/08/02 2024/08/01 2023/08/02 2024/08/01 2023/08/02 2024/08/01 2023/08/02 2024/08/01 Test Equipment Manufacturer Model No. Version Calibration Calibration Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao'an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:cta@cta-test.cn Web:http://www.cta-test.cn Report No.: CTA24050900403 EMI Test Software EMI Test Software RF Test Software RF Test Software Tonscend Tonscend Tonscend Tonscend TS®JS32-RE TS®JS32-CE TS®JS1120-3 TS®JS1120 number 5.0.0.2 5.0.0.1 3.1.65 3.1.46 Page 10 of 37 Date N/A N/A N/A N/A Due Date N/A N/A N/A N/A Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao'an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:cta@cta-test.cn Web:http://www.cta-test.cn Report No.: CTA24050900403 Page 11 of 37 4 TEST CONDITIONS AND RESULTS 4.1 AC Power Conducted Emission TEST CONFIGURATION Vert. reference plane EMI receiver EUT LISN Reference ground plane TEST PROCEDURE 1 The equipment was set up as per the test configuration to simulate typical actual usage per the user's manual. The EUT is a tabletop system, a wooden table with a height of 0.8 meters is used and is placed on the ground plane as per ANSI C63.10-2013. 2 Support equipment, if needed, was placed as per ANSI C63.10-2013 3 All I/O cables were positioned to simulate typical actual usage as per ANSI C63.10-2013 4 The EUT received power from adapter, the adapter received AC120V/60Hz and AC 240V/60Hz power through a Line Impedance Stabilization Network (LISN) which supplied power source and was grounded to the ground plane. 5 All support equipments received AC power from a second LISN, if any. 6 The EUT test program was started. Emissions were measured on each current carrying line of the EUT using a spectrum Analyzer / Receiver connected to the LISN powering the EUT.The LISN has two monitoring points: Line 1 (Hot Side) and Line 2 (Neutral Side). Two scans were taken: one with Line 1 connected to Analyzer / Receiver and Line 2 connected to a 50 ohm load; the second scan had Line 1 connected to a 50 ohm load and Line 2 connected to the Analyzer / Receiver. 7 Analyzer / Receiver scanned from 150 KHz to 30MHz for emissions in each of the test modes. 8 During the above scans, the emissions were maximized by cable manipulation. AC Power Conducted Emission Limit For intentional device, according to § 15.207(a) AC Power Conducted Emission Limits is as following Frequency range (MHz) Limit (dBuV) Quasi-peak Average 0.15-0.5 66 to 56* 56 to 46* 0.5-5 56 46 5-30 60 50 * Decreases with the logarithm of the frequency. TEST RESULTS Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao'an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:cta@cta-test.cn Web:http://www.cta-test.cn Report No.: CTA24050900403 Page 12 of 37 Remark: 1. All modes of 802.11b/g/n were tested at Low, Middle, and High channel; only the worst result of 802.11b CH11 was reported as below: 2. Both 120 VAC, 50/60 Hz and 240 VAC, 50/60 Hz power supply have been tested, only the worst result of 120 VAC, 60 Hz was reported as below: Power supply: DC 5.0V from adapter AC 120V/60Hz Polarization L Note:1).QP Value (dBµV)= QP Reading (dBµV)+ Factor (dB) 2). Factor (dB)=insertion loss of LISN (dB) + Cable loss (dB) 3). QPMargin(dB) = QP Limit (dBµV) - QP Value (dBµV) 4). AVMargin(dB) = AV Limit (dBµV) - AV Value (dBµV) Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao'an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:cta@cta-test.cn Web:http://www.cta-test.cn Report No.: CTA24050900403 Power supply: DC 5.0V from adapter AC 120V/60Hz Polarization Page 13 of 37 N Note:1).QP Value (dBµV)= QP Reading (dBµV)+ Factor (dB) 2). Factor (dB)=insertion loss of LISN (dB) + Cable loss (dB) 3). QPMargin(dB) = QP Limit (dBµV) - QP Value (dBµV) 4). AVMargin(dB) = AV Limit (dBµV) - AV Value (dBµV) Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao'an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:cta@cta-test.cn Web:http://www.cta-test.cn Report No.: CTA24050900403 4.2 Radiated Emission TEST CONFIGURATION Frequency range 9 KHz 30MHz Turntable EUT Loop antenna 3m 0.8 m Ground Plane Frequency range 30MHz 1000MHz Page 14 of 37 Coaxial Cable Test Receiver Turntable EUT Test Receiver Ground Plane 3m 0.8m m Frequency range above 1GHz-25GHz 1m to 4m Coaxial Cable Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao'an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:cta@cta-test.cn Web:http://www.cta-test.cn Report No.: CTA24050900403 Page 15 of 37 TEST PROCEDURE 1. The EUT was placed on a turn table which is 0.8m above ground plane when testing frequency range 9 KHz 1GHz;the EUT was placed on a turn table which is 1.5m above ground plane when testing frequency range 1GHz 25GHz. 2. Maximum procedure was performed by raising the receiving antenna from 1m to 4m and rotating the turn table from 0° to 360° to acquire the highest emissions from EUT. 3. And also, each emission was to be maximized by changing the polarization of receiving antenna both horizontal and vertical. 4. Repeat above procedures until all frequency measurements have been completed. 5. Radiated emission test frequency band from 9KHz to 25GHz. 6. The distance between test antenna and EUT as following table states: Test Frequency range Test Antenna Type Test Distance 9KHz-30MHz Active Loop Antenna 3 30MHz-1GHz Ultra-Broadband Antenna 3 1GHz-18GHz Double Ridged Horn Antenna 3 18GHz-25GHz Horn Anternna 1 7. Setting test receiver/spectrum as following table states: Test Frequency range Test Receiver/Spectrum Setting Detector 9KHz-150KHz RBW=200Hz/VBW=3KHz,Sweep time=Auto QP 150KHz-30MHz RBW=9KHz/VBW=100KHz,Sweep time=Auto QP 30MHz-1GHz RBW=120KHz/VBW=1000KHz,Sweep time=Auto QP Peak Value: RBW=1MHz/VBW=3MHz, 1GHz-40GHz Sweep time=Auto Average Value: RBW=1MHz/VBW=10Hz, Peak Sweep time=Auto Field Strength Calculation The field strength is calculated by adding the Antenna Factor and Cable Factor and subtracting the Amplifier Gain and Duty Cycle Correction Factor(if any) from the measured reading. The basic equation with a sample calculation is as follows: FS = RA + AF + CL - AG Where FS = Field Strength RA = Reading Amplitude AF = Antenna Factor CL = Cable Attenuation Factor (Cable Loss) AG = Amplifier Gain Transd=AF +CL-AG RADIATION LIMIT For intentional device, according to § 15.209(a), the general requirement of field strength of radiated emission from intentional radiators at a distance of 3 meters shall not exceed the following table. According to § 15.247(d), in any 100kHz bandwidth outside the frequency band in which the EUT is operating, the radio frequency power that is produced by the intentional radiator shall be at least 20dB below that in the100kHz bandwidth within the band that contains the highest level of desired power. The pre-test have done for the EUT in three axes and found the worst emission at position shown in test setup photos. Frequency (MHz) 0.009-0.49 0.49-1.705 1.705-30 30-88 88-216 216-960 Above 960 Distance (Meters) 3 3 3 3 3 3 3 Radiated (dBV/m) 20log(2400/F(KHz))+40log(300/3) 20log(24000/F(KHz))+ 40log(30/3) 20log(30)+ 40log(30/3) 40.0 43.5 46.0 54.0 Radiated (V/m) 2400/F(KHz) 24000/F(KHz) 30 100 150 200 500 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao'an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:cta@cta-test.cn Web:http://www.cta-test.cn Report No.: CTA24050900403 Page 16 of 37 TEST RESULTS Remark: 1. This test was performed with EUT in X, Y, Z position and the worse case was found when EUT in X position. 2. All three channels (lowest/middle/highest) of each mode were measured below 1GHz and recorded worst case at 802.11b low channel. 3. Radiated emission test from 9 KHz to 10th harmonic of fundamental was verified, and no emission found except system noise floor in 9 KHz to 30MHz and not recorded in this report. For 30MHz-1GHz Horizontal Note:1).Level (dBµV/m)= Reading (dBµV)+ Factor (dB/m) 2). Factor(dB/m)=Antenna Factor (dB/m) + Cable loss (dB) - Pre Amplifier gain (dB) 3). Margin(dB) = Limit (dBµV/m) - Level (dBµV/m) Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao'an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:cta@cta-test.cn Web:http://www.cta-test.cn Report No.: CTA24050900403 Vertical Page 17 of 37 Note:1).Level (dBµV/m)= Reading (dBµV)+ Factor (dB/m) 2). Factor(dB/m)=Antenna Factor (dB/m) + Cable loss (dB) - Pre Amplifier gain (dB) 3). Margin(dB) = Limit (dBµV/m) - Level (dBµV/m) Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao'an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:cta@cta-test.cn Web:http://www.cta-test.cn Report No.: CTA24050900403 Page 18 of 37 For 1GHz to 25GHz Note: 802.11b/802.11g/802.11n (H20)/802.11n (H40)Mode all have been tested, only worse case 802.11b mode is reported (above 1GHz) Frequency(MHz): 2412 Polarity: HORIZONTAL Frequency (MHz) Emission Level (dBuV/m) Limit (dBuV/m) Margin (dB) Raw Value (dBuV) Antenna Factor (dB/m) Cable Factor (dB) Pre- Correction amplifier Factor (dB) (dB/m) 4824.00 61.82 PK 74 12.18 66.18 32.4 5.11 41.87 -4.36 4824.00 45.48 AV 54 8.52 49.84 32.4 5.11 (4d1B.8)e7- -4.36 7236.00 54.21 PK 74 19.79 54.84 36.58 6.43 am43p.l6if4ier -0.63 7236.00 43.19 AV 54 10.81 43.82 36.58 6.43 F4a3c.6to4r -0.63 Frequency(MHz): Frequency (MHz) Emission Level (dBuV/m) 4824.00 4824.00 59.73 PK 43.05 AV 7236.00 51.80 PK 7236.00 40.88 AV 2412 Limit (dBuV/m) 74 54 74 54 Margin (dB) 14.27 10.95 22.20 13.12 Polarity: Raw Value (dBuV) Antenna Factor (dB/m) 64.09 32.4 47.41 32.4 52.43 36.58 41.51 36.58 Cable Factor (dB) 5.11 5.11 6.43 6.43 VERTICAL Pre- Correction amplifier Factor (dB) (dB/m) 41.87 (4d1B.8)e7aFm4a3pc.l6tifo4ier r 43.64 -4.36 -4.36 -0.63 -0.63 Frequency(MHz): Frequency (MHz) Emission Level (dBuV/m) 4874.00 4874.00 61.32 PK 44.85 AV 7311.00 7311.00 53.95 PK 42.62 AV 2437 Limit (dBuV/m) 74 54 74 54 Margin (dB) 12.68 9.15 20.05 11.38 Polarity: Raw Value (dBuV) Antenna Factor (dB/m) 65.27 48.80 32.56 32.56 54.31 42.98 36.54 36.54 HORIZONTAL Cable Factor (dB) Pre- Correction amplifier Factor (dB) (dB/m) 5.34 41.85 -3.95 5.34 (4d1B.8)e5- -3.95 6.81 am43p.l7if1ier -0.36 6.81 F4a3c.7to1r -0.36 Frequency(MHz): Frequency (MHz) Emission Level (dBuV/m) 4874.00 4874.00 7311.00 7311.00 59.41 PK 42.44 AV 51.92 PK 40.39 AV 2437 Limit (dBuV/m) 74 54 74 54 Margin (dB) 14.59 11.56 22.08 13.61 Polarity: Raw Value (dBuV) Antenna Factor (dB/m) 63.36 46.39 52.28 40.75 32.56 32.56 36.54 36.54 Cable Factor (dB) 5.34 5.34 6.81 6.81 VERTICAL Pre- Correction amplifier Factor (dB) (dB/m) 41.85 (4d1B.8)e5am43p.l7if1ier F4a3c.7to1r -3.95 -3.95 -0.36 -0.36 Frequency(MHz): Frequency (MHz) 4924.00 4924.00 7386.00 7386.00 Emission Level (dBuV/m) 60.64 PK 45.74 AV 54.73 PK 42.07 PK 2462 Limit (dBuV/m) 74 54 74 54 Margin (dB) 13.36 8.26 19.27 11.93 Polarity: Raw Value (dBuV) 64.10 49.20 54.79 42.13 Antenna Factor (dB/m) 32.73 32.73 36.5 36.5 HORIZONTAL Cable Factor (dB) Pre- Correction amplifier Factor (dB) (dB/m) 5.64 41.83 -3.46 5.64 (4d1B.8)e3- -3.46 7.23 am43p.l7if9ier -0.06 7.23 F4a3c.7to9r -0.06 Frequency(MHz): Frequency (MHz) Emission Level (dBuV/m) 4924.00 4924.00 7386.00 7386.00 58.72 PK 43.73 AV 51.88 PK 40.41 PK 2462 Limit (dBuV/m) Margin (dB) 74 15.28 54 10.27 74 22.12 54 13.59 Polarity: Raw Value (dBuV) Antenna Factor (dB/m) 62.18 47.19 51.94 40.47 32.73 32.73 36.5 36.5 Cable Factor (dB) 5.64 5.64 7.23 7.23 VERTICAL Pre- Correction amplifier Factor (dB) (dB/m) 41.83 (4d1B.8)e3am43p.l7if9ier F4a3c.7to9r -3.46 -3.46 -0.06 -0.06 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao'an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:cta@cta-test.cn Web:http://www.cta-test.cn Report No.: CTA24050900403 Page 19 of 37 1) Emission level (dBuV/m) = Meter Reading+ antenna Factor+ cable loss- preamp factor. 2) Margin value = Limits-Emission level. 3) -- Mean the PK detector measured value is below average limit. 4) The other emission levels were very low against the limit. 5) RBW1MHz VBW3MHz Peak detector is for PK value; RBW 1MHz VBW10Hz Peak detector is for AV value. Results of Band Edges Test (Radiated) Note: 802.11b/802.11g/802.11n (H20) /802.11n (H40) Mode all have been tested, only worse case 802.11b mode is reported Frequency(MHz): 2412 Polarity: HORIZONTAL Frequency (MHz) Emission Level (dBuV/m) Limit (dBuV/m) Margin (dB) Raw Value (dBuV) Antenna Factor (dB/m) Cable Factor (dB) Pre- Correction amplifier Factor (dB) (dB/m) 2390.00 2390.00 61.81 PK 42.28 AV Frequency(MHz): Frequency (MHz) Emission Level (dBuV/m) 74 12.19 54 11.72 2412 Limit (dBuV/m) Margin (dB) 72.23 52.70 27.42 27.42 Polarity: Raw Value (dBuV) Antenna Factor (dB/m) 4.31 4.31 Cable Factor (dB) 42.15 (4d2B.1)e5amplifier VEFRaTcItCorAL -10.42 -10.42 Pre- Correction amplifier Factor (dB) (dB/m) 2390.00 2390.00 59.73 PK 40.62 AV Frequency(MHz): Frequency (MHz) Emission Level (dBuV/m) 74 14.27 54 13.38 2462 Limit (dBuV/m) Margin (dB) 70.15 51.04 27.42 27.42 Polarity: Raw Value (dBuV) Antenna Factor (dB/m) 4.31 42.15 -10.42 4.31 (4d2B.1)e5- -10.42 HOaRFmIaZpcOltifoNierTrAL Cable Pre- Correction Factor amplifier Factor (dB) (dB) (dB/m) 2483.50 2483.50 61.37 PK 42.53 AV Frequency(MHz): Frequency (MHz) Emission Level (dBuV/m) 74 12.63 54 11.47 2462 Limit (dBuV/m) Margin (dB) 71.48 27.7 52.64 27.7 Polarity: Raw Value (dBuV) Antenna Factor (dB/m) 4.47 4.47 Cable Factor (dB) 42.28 -10.11 (4d2B.2)e8- -10.11 VaEFmRapTclItiCfoierArL Pre- Correction amplifier Factor (dB) (dB/m) 2483.50 58.62 PK 74 15.38 68.73 27.7 4.47 42.28 2483.50 41.00 AV 54 13.00 51.11 27.7 4.47 (4d2B.2)e8- Note amplifier 1) Emission level (dBuV/m) = Meter Reading+ antenna Factor+ cable loss- preamp factor. Factor -10.11 -10.11 2) Margin value = Limits-Emission level. 3) -- Mean the PK detector measured value is below average limit. 4) The other emission levels were very low against the limit. 5) RBW1MHz VBW3MHz Peak detector is for PK value; RBW 1MHz VBW10Hz Peak detector is for AV value. Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao'an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:cta@cta-test.cn Web:http://www.cta-test.cn Report No.: CTA24050900403 Page 20 of 37 4.3 Maximum Peak Conducted Output Power Limit The Maximum Peak Output Power Measurement is 30dBm. Test Procedure Remove the antenna from the EUT and then connect a low loss RF cable from the antenna port to the power sensor. Test Configuration EUT Power Sensor Test Results Type 802.11b 802.11g 802.11n(HT20) 802.11n(HT40) Channel 01 06 11 01 06 11 01 06 11 03 06 09 Output power PK (dBm) 13.68 13.75 13.28 12.70 13.59 12.70 13.07 13.13 12.62 13.07 13.56 13.14 Limit (dBm) Result 30.00 Pass 30.00 Pass 30.00 Pass 30.00 Pass Note: 1) Measured output power at difference data rate for each mode and recorded worst case for each mode. 2) Test results including cable loss. 3) Worst case data at 1Mbps at IEEE 802.11b; 6Mbps at IEEE 802.11g; 6.5Mbps at IEEE 802.11n HT20; 13.5Mbps at IEEE 802.11n HT40; Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao'an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:cta@cta-test.cn Web:http://www.cta-test.cn Report No.: CTA24050900403 Page 21 of 37 4.4 Power Spectral Density Limit For digitally modulated systems, the power spectral density conducted from the intentional radiator to the antenna shall not be greater than 8 dBm in any 3 kHz band during any time interval of continuous transmission. Test Procedure 1. Use this procedure when the maximum peak conducted output power in the fundamental emission is used to demonstrate compliance. 2. Set the RBW 3 kHz. 3. Set the VBW 3× RBW. 4. Set the span to 1.5 times the DTS channel bandwidth. 5. Detector = peak. 6. Sweep time = auto couple. 7. Trace mode = max hold. 8. Allow trace to fully stabilize. 9. Use the peak marker function to determine the maximum power level. 10. If measured value exceeds limit, reduce RBW (no less than 3 kHz) and repeat. 11. The resulting peak PSD level must be 8dBm. Test Configuration EUT SPECTRUM ANALYZER Test Results Type 802.11b 802.11g 802.11n(HT20) 802.11n(HT40) Channel 01 06 11 01 06 11 01 06 11 03 06 09 Power Spectral Density (dBm/3KHz) -10.17 -10.69 -10.86 -16.27 -16.96 -16.67 -16.90 -17.60 -17.12 -18.74 -19.57 -19.11 Limit (dBm/3KHz) 8.00 8.00 8.00 8.00 Result Pass Pass Pass Pass Note: 1) Measured peak power spectrum density at difference data rate for each mode and recorded worst case for each mode. 2) Test results including cable loss; 3) Worst case data at 1Mbps at IEEE 802.11b; 6Mbps at IEEE 802.11g; 6.5Mbps at IEEE 802.11n HT20; 13.5Mbps at IEEE 802.11n HT40; Please refer to following plots; Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao'an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:cta@cta-test.cn Web:http://www.cta-test.cn Report No.: CTA24050900403 802.11b Page 22 of 37 802.11g CH01 CH01 CH06 CH06 CH11 CH11 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao'an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:cta@cta-test.cn Web:http://www.cta-test.cn Report No.: CTA24050900403 802.11n(HT20) Page 23 of 37 802.11n(HT40) CH01 CH03 CH06 / CH06 CH11 CH09 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao'an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:cta@cta-test.cn Web:http://www.cta-test.cn Report No.: CTA24050900403 Page 24 of 37 4.5 6dB Bandwidth Limit For digital modulation systems, the minimum 6 dB bandwidth shall be at least 500 kHz Test Procedure The transmitter output was connected to the spectrum analyzer through an attenuator. The bandwidth of the fundamental frequency was measured by spectrum analyzer with 100 KHz RBW and 300 KHz VBW. The 6dB bandwidth is defined as the total spectrum the power of which is higher than peak power minus 6dB. Test Configuration EUT SPECTRUM ANALYZER Test Results Type 802.11b 802.11g 802.11n(HT20) 802.11n(HT40) Channel 01 06 11 01 06 11 01 06 11 03 06 09 6dB Bandwidth (MHz) 8.520 8.560 8.120 11.320 16.280 12.560 14.400 15.960 13.800 35.040 36.000 32.480 Limit (KHz) 500 500 500 500 Result Pass Pass Pass Pass Note: 1) Measured peak power spectrum density at difference data rate for each mode and recorded worst case for each mode. 2) Test results including cable loss; 3) Worst case data at 1Mbps at IEEE 802.11b; 6Mbps at IEEE 802.11g; 6.5Mbps at IEEE 802.11n HT20; 13.5Mbps at IEEE 802.11n HT40; Please refer to following plots; Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao'an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:cta@cta-test.cn Web:http://www.cta-test.cn Report No.: CTA24050900403 802.11b Page 25 of 37 802.11g CH01 CH01 CH06 CH06 CH11 CH11 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao'an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:cta@cta-test.cn Web:http://www.cta-test.cn Report No.: CTA24050900403 802.11n(HT20) Page 26 of 37 802.11n(HT40) CH01 CH03 CH06 CH06 CH11 CH09 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao'an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:cta@cta-test.cn Web:http://www.cta-test.cn Report No.: CTA24050900403 Page 27 of 37 4.6 Out-of-band Emissions Limit In any 100 kHz bandwidth outside the frequency band in which the spread spectrum or digitally modulated intentional radiator is operating, the radio frequency power that is produced by the intentional radiator shall be at least 20 dB below that in the 100 kHz bandwidth within the band that contains the highest level of the desired power, based on either an RF con-ducted or a radiated measurement, pro-vided the transmitter demonstrates compliance with the peak conducted power limits. If the transmitter com-plies with the conducted power limits based on the use of RMS averaging over a time interval, as permitted under paragraph (b)(3) of this section, the attenuation required under this paragraph shall be 30 dB instead of 20 dB. Attenuation below the general limits specified in §15.209(a) is not required. Test Procedure Connect the transmitter output to spectrum analyzer using a low loss RF cable, and set the spectrum analyzer to RBW=100 kHz, VBW= 300 kHz, peak detector , and max hold. Measurements utilizing these setting are made of the in-band reference level, bandedge and out-of-band emissions. Test Configuration EUT SPECTRUM ANALYZER Test Results Remark: The measurement frequency range is from 30MHz to the 10th harmonic of the fundamental frequency. The lowest, middle and highest channels are tested to verify the spurious emissions and bandage measurement data. And record the worst data in the report. Test plot as follows: Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao'an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:cta@cta-test.cn Web:http://www.cta-test.cn Report No.: CTA24050900403 802.11b Page 28 of 37 Reference CH01 Reference CH06 30MHz-1GHz 30MHz-1GHz 1GHz -25GHz 1GHz -25GHz Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao'an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:cta@cta-test.cn Web:http://www.cta-test.cnMicrosoft Word 2016 Microsoft Word 2016