Instructions for INMOTION models including: 2A2Q2-MA01, MA01, MA01 5000mAh Wireless Power Bank, 5000mAh Wireless Power Bank, Wireless Power Bank, Power Bank
Taisons International Co. MA01 5000mAh Wireless Power bank 2A2Q2-MA01 2A2Q2MA01 ma01
File Info : application/pdf, 1 Pages, 342.43KB
DocumentDocumentIN MOTION 5 1. Wireless Charging Surface 2. Power Check Button 3. Lightning Input 4. USB-C Input / Output 5. LED Indicator 4 3 IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS Please read all safety information and operating instructions prior to using this battery product. Improper use of the product could result in excess heat, fire, explosion, electric shock, toxic fumes or other injury or damage. 1. Do not place or store the product in any high temperature environment, including intense sunlight or heat. Do not place the product in a fire. 2. Be cautious of any excessive drops, bumps, abrasions, or other impacts to the product. 3. Do not disassemble the product. Do not attempt to repair or modify the product in any manner. Do not try to replace any parts of the product. 4. Do not expose the product to moisture or submerge it in a liquid. Keep the product battery dry at all times. 5. Do not attempt to charge the product using any other method except as described in this manual. Only use the included cable to charge the product. 6. The product is intended for use by adults. The product should only be used by minors when under proper adult trained supervision. The product should never be used by small children. 7. If you find that your product is not functioning properly, or if the product is emitting excessive heat, odor, deformed in any way, broken, cut, experiencing or demonstrating some abnormal phenomenon, stop using it immediately. 8. When planning for extended storage of the product, first charge it for one hour. 9. Do not use the product while in any potentially explosive atmosphere. Sparks in such areas could cause an explosion or fire, resulting in serious injury or even death. 10. If you choose to dispose of the product, dispose of the battery in an appropriate manner following all federal and state regulations. Since the product contains electronic components and a battery, it cannot thrown away with normal household waste. Power Bank Recharge Insert the USB-C connector of the charging cable provided into the USB-C port of the power bank and insert the other end to a power supply with USB-C port or; Insert a Lightning cable (not included) to the IP input port of the power bank and insert the other end to a power supply. Wireless Charging Other wireless charging supported device can also be charged wirelessly however they will not be attracted to each other. To have a better charging performance, please remove the case of your device before charging. Wired Charging Insert a USB-C connector of a charging cable into the USB-C port of the power bank and connect the other end to your device. The power bank supports wireless and wired charging simultaneously. Battery Indicator Press the power check button to check the remaining battery capacity. 4 lights on, indicating the remaining battery capacity is around 75-1000/o 3 lights on, indicating the remaining battery capacity is around 50-750/o 2 lights on, indicating the remaining battery capacity is around 25-500/o 1 light on, indicating the remaining battery capacity is around 10-250/o 1st light flashing, indicating the remaining battery capacity is under 109!oPower bank needs recharging. Technical Specification: · Capacity: 5000mAh · Lightning Input: DC 5V / 2.1A · USB-C Input: DC 5V / 3A, DC 9V /2A, DC 12V / 1.5A · Wireless Output: 5W, 7.5W, 1OW, 15W Max. · USB-C Output: DC 5V /3A, DC 9V / 2A, DC 12V /1.5A 1BW Max. · Size: 93.7 x 63.7 x 14.6mm (3.7 x 2.5 x 0.6 in)[LxWxH] · Weight: 116 g (4.1 oz) · Cable length: 0.25m (10 in.) FCC COMPLIANCE This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: · Reorient or relocate the receiving antenna · Increase the separation between the equipment and receiver · Connect the equipment into an outlet on a circuit different from that to which the receiver is connected · Consult the dealer or an experienced radio / TV technician for help The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. 1Phone is a trademark of Apple Inc., registered 1n the U.S. and other countries. lnMotion and this product, are not affiliated with, or endorsed by Apple Inc. Colors and content may vary. Please retain this information for future reference. IMEG LLC 3755 W Sunset Rd Suite A, Las Vegas, NV 89118 Produced in China