User Manual for OzSpy Spy Shop models including: MDC-KP03 1.3 Inch Screen Body Camera with Night Vision, MDC-KP03, 1.3 Inch Screen Body Camera with Night Vision, Camera with Night Vision, Night Vision
1.3 Inch Screen Body Camera with Night Vision - OzSpy Spy Shop | Security Systems
15 Pocket Clip Built-in strong magnetic magnet in the back clip. 16 Screen 1.3 inch TFT Full HD Screen 17 Indicators Charging indicator light hole: red light is on charging, blue is full charge. Operation Instructions 1 ON/OFF：Press and hold the power button for 3 seconds in the shutdown state, and the recorder will turn on. The screen will display the startup logo and enter
User Manual Product Introduction Button Description 1 Audio Push up to start recording, push down to stop recording, and save the Record Key recording file. 2 Push up In the menushort press up to selectOn playback pauses mode Audio Short press to previous file. Volume + On playback mode, short press to ++ volume; Short press to turn on/off Night Vision night vision. On/Off 3 Push Down In the menuShort press to select nextOn playback paused mode Audio Short press to next file Volume-- On playback mode,short press to volume; Menu Key On standby modeshort press enter into menu mode. 4 Micro SD Please insert the memory card in the direction shown on the shell card slot 5 Reset If machine is crashed, reboot it by pressing the reset button 6 Photo taking Standby modeshort press on time to take a photo In the menu interface, short press to confirm and save the settings; Enter Short press to pause/continue the playback video. button 7 Video Record Push up to start recording, push down to stop recording, and save the recording file. 8 ON/OFF Long press to turn on/off Camera Short press to On/Off Screen. ON/OFF Screen 9 Return Back In menu setting, short press to return back the previous menu level Key When the display screen is inverted you can short press "rotate button" Rotate to rotate the screen. 10 TYPE-C Interface Charging interface/Connect computer for card reader/Webcam. 11 Speaker Microphone Play with sound by speaker Microphone position recording/Please don't cover the hole when recording. 12 Screw Fixed bracket nut Stand 13 Lens Full HD Lens 14 Infrared LED 4pcs 940 IR LEDS 15 Pocket Built-in strong magnetic magnet in the back clip. Clip 16 Screen 1.3 inch TFT Full HD Screen 17 Indicators Charging indicator light hole: red light is on charging, blue is full charge. Operation Instructions 1 ON/OFFPress and hold the power button for 3 seconds in the shutdown state, and the recorder will turn on. The screen will display the startup logo and enter standby mode; Press and hold for 3 seconds in standby mode to turn off the recorder; Push up the Audio/Video button in the shutdown state to turn on the device and enter the audio/recording state. 2 VideoWhen shutting down, pushing the recording button upwards can achieve the function of "one click start recording", and the recorder will immediately turn on and enter the recording state; In standby mode, push the recording button up to start recording the video, push the recording button down to stop recording and save the file. The recording duration can be set in the menu, with 3 minutes, 5 minutes, and 10 minutes to choose from. 3 AudioWhen shutting down, pushing the audio recording button upwards can achieve the function of "one click start audio recording", and the recorder will immediately turn on and enter the audio recording state; In standby mode, push the audio recording button up to start recording audio, and push the audio recording button down to stop recording and save the file. 4 Photo takingOn standby mode, short press photo taking key to take photo. 5 Motion DetectionShort press"M"button to enter into menu,Select motion detection, short press the confirm button, select "on", confirm, and then short press the return button to enter the motion detection mode. When the camera detects a moving object, the recording function will automatically start. Short press the "M" button to exit the motion detection mode and enter standby mode. 6 PlaybackShort press"M"button to enter into menu modeScroll down to select playback. Short press the confirm button to enter playback mode. Short press the scroll up/down button to browse the recorded videos, photos, and recording files. Short press the confirm button to play back. Short press the confirm button again to pause playback. Short press the return button to exit playback mode and enter standby mode. 7 Power Save Mode: This machine defaults to no operation and automatically turns off the display screen after 3 minutes. You can also quickly turn off the screen by pressing the power button. After turning off the screen, simply press any key to turn on the display screen again; 5 minute automatic shutdown without any operation (automatic display screen shutdown and automatic shutdown duration can be set in the menu). 8 ChargingThis machine is equipped with a rechargeable Lion-battery. Please use a charger that does not exceed 5V/2A to charge. The red light remains on when charging and the blue light remains on when fully charged; When the battery is low, there will be a text prompt on the display screen, and charging should be done in time. 9 Reset When the recorder encounters occasional stuck, you can press this button to reset. After resetting, you need to manually turn on the machine. 10 Files ManagementConnect the recorder to the computer using a data cable. The recorder displays options for "memory" and "camera". Short press "+/-" to select "memory", short press the confirm button, and the recorder displays "memory" to indicate that the recorder and computer are connected. The recording files, photo files, and audio files are all stored in the DCIM folder; When "Camera" is selected, Videotelephony software (such as Tencent QQ) can be used as PC Camera Webcam. 11 MenuAfter turning on the machine, short press the "M" button to enter the menu. Short press the "+/-" button to select the desired settings. Short press the confirm button to enter the settings. After confirming the settings, short press the return button to return to the previous menu level. Press the return button again to exit the menu. Notes This product is a precision electronic product that requires attention during use 1Please keep the product away from the electromagnetic environment; 2Please do not separate or modify the product; 3Please do not put heavy objects on the product; 4Please stay away from harsh environments such as humidity and smoke; 5Please do not use water or other chemical reagents to clean the product. Please use a soft cloth to clean the surface of the product; 6Please do not use excessive force to squeeze the product; 7Please do not place the product in direct sunlight or in a baking environment. Please stay away from high and low temperature environments; 8Please do not violently shake or crash the product; 9Do not disassemble this machine without authorization, otherwise the warranty rights will be lost. If you have any questions, please contact customer service; 10Please strictly abide by the relevant laws and regulations of the country and region where the product is used, and shall not be used for any illegal purpose, otherwise the consequences will be borne by oneself; 11This product uses a polymer physical battery, which can be recharged and used repeatedly; Please charge in time when the battery is low. 12This product is a high-definition screen recorder, and the power consumption of bright screen operation is relatively higher than that of a screen less general definition machine. During use, it is normal to experience overheating and turning to a normal state; FAQ Symptom Possible Reason Don't Power On Crash, no response from buttons Black Screen Incorrect system date 1. The recorder has insufficient power; 2. When the battery is in a low state of protection. Improper operation resulting in program confusion May have pressed the off-screen button to enter power saving mode Date and Time is not verified Can't connect with Poor USB cable or poor computer computer's USB port Recorder screen is Turn on the night vision lights black and white or red Solution 1. Please recharge and turn on the machine; 2. Press the reset button once and restart. Press the reset button to restart. Short press the button to restore. Revise date and time setting in the menu Replace the USB cable or try another computer USB port Short press the night vision shortcut key again to turn off the night vision lights Can't record No micro SD card or can't recognize the memory card. Please purchase a quality memory card. For the first time using it, please format it in the local menu. Video Resolution Picture Screen Size Storage Battery Lens Battery Time Charge Time Charging Voltage Interface Night Vison Microphone Speaker Size Parameters 1920*1080H.264 3264*2448JPEG 1.3inch Full HD Screen Max 128G Micro SD Card 2000mAH/3.8V Li-on battery Manually adjustable 180 degree Continue video recording support 8hoursON mode of night vision& screen OFF About 4hours DC-5V Type-C Manually opening and closing through shortcut keys Built-in Built-in 96mm*38mm*16mm(not including pocket clipMac OS X 10.13.1 Quartz PDFContext Word