iFi audio | British Hi-Fi Audio Technology Company
User Manual for iFi audio models including: Zen Can Signature Set HFM, Can Signature Set HFM, Signature Set HFM
iFi Audio ZEN CAN Signature HFM | bol.com
File Info : application/pdf, 1 Pages, 660.22KB
DocumentDocumentCAN HFM INPUT PowerMatch 0dB 18dB 1 3 6dB 12dB 2 HFM XSpace 12 3 4 5 6 78 9 Thank you for purchasing the CAN Signature from ZEN series. The ZEN CAN Signature HFM is a balanced headphone amplifier optimized for HIFIMAN headphones. 1. Power switch 2. Input channel switch Input 1: RCA Input 2: Single-ended 3.5mm Input 3: Balanced 4.4mm 3. PowerMatch selection: 0dB/6dB/12dB/18dB We recommend starting from 0dB and then increasing the switchable gain level to attain an enjoyable and comfortable level of volume from the headphones. Warning: at the outset do not use excessive gain, otherwise damage to hearing or connected headphones may ensue. AMR/iFi audio is not responsible for any damage/injury from misuse. 4. Analogue Volume Control At normal listening levels, the volume control should be around the 12 o'clock position. Increase the gain level to enjoy a higher listening level. 5. Single-ended 6.3mm output For connecting single-ended 6.3mm headphones. With single-ended 3.5mm headphones, connect with a 3.5mm to 6.3mm adapter. 6. Balanced 4.4mm analogue output For connecting balanced 4.4mm headphones. Tip: When using HIFIMAN headphones with balanced design, we recommend using 4.4mm balanced output. 7. HFM Headphone corrections optimized for HIFIMAN headphones. 8. XSpace Matrix LED The XSpace Matrix(on/off ) recreates a holographic sound field. It is a pure analogue signal processing circuit designed for listening to headphones as if one was listening to speakers. This addresses the 'music inside the head' sensation, which makes for unsettling listening. Tip: Sonically-hindering DSP is NOT used for HIFIMAN nor XSpace Matrix systems. They use the highest-quality discrete components and operate purely in the analogue domain. Hence all the clarity and resolution of the original music is retained . 9. Settings This button chooses between: - Off - HFM - XSpace 3 BALANCED 2 R SINGLE ENDED Inputs 1 L CAN BALANCED HFM Technology lic ensed from AMR-Audio, UK A ssembled in C hina Output DC 5V 10 11 12 13 14 10. Balanced 4.4mm analogue input This is a balanced analogue input. 11. Single-ended 3.5mm analogue input For connecting single-ended 3.5mm input. 12. RCA analogue input This is an analogue input. 13. Balanced 4.4mm analogue output This is an analogue output via 4.4mm > XLR or other balanced interconnects. You could use this for an active speaker. Tip: As the ZEN CAN Signature HFM is balanced, this is the recommended output. 14. DC 5V power Please connect the ZEN CAN Signature HFM to the enclosed power supply, the super-silent iPower2. The ZEN CAN Signature HFM must ONLY be powered by 5 volts. Specifications Input voltage: DC 5V/2.5A Max Output: Balanced: S-E: >15.1V/385 mW (@ 600 Ohm) >11.0V/1890 mW (@ 64 Ohm) >6.2V/1200 mW (@ 32 Ohm) >7.6V/98 mW (@ 600 Ohm) >7.4V/870 mW (@ 64 Ohm) >7.2V/1600 mW (@ 32Ohm) THD & N: Balanced: S-E: <0.006% (@ 360 mW/2.4V 16 Ohm) <0.005% (@ 100 mW/1.27V 16 Ohm) SNR: Balanced: S-E: >121dBA (@ 15.2V) >120dBA (@ 7.6V) Max. Input: Balanced: RCA: 3.5mm: 7.4V RMS 3.8V RMS 1.92V RMS Gain: 0dB, 6dB, 12dB and 18dB Frequency Response: 10Hz - 200kHz (-3dB) Power consumption: No Signal ~5W Max Signal ~12W Dimensions: 158 x 117 x 35 mm 6.2" x 4.6" x 1.4" Net weight: 550 g (1.21 Ibs) Warranty period: 12 months Speci cations are subject to change without notice. ifi-audio.com Ver1.2